Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Spinel”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,297 records · Page 72

Behavior of silver molybdate at high-pressure

Behavior of cubic spinel phase of Ag{sub 2}MoO{sub 4} is investigated at high pressure using X-ray diffraction and Raman spectroscopy. The P-V data are fitted to a third order Birch-Murnaghan equation of state using a value of B{sub 0}=113 GPa and B Prime {sub 0}=4. The compound is also found to exhibit a phase transition around 5 GPa to a tetragonal structure and the two phases are found to coexist over a range of pressures. Raman spectra exhibit dramatic changes across the phase transition. Increase of X-ray background scattering and broadening of the Raman peaks associated with MoO{sub 4} tetrahedral ions in the high pressure phase suggest evolution of positional disorder. However, no evidence of pressure-induced amorphization was found up to 47 GPa. - Graphical abstract: Evolution of the integrated intensity of all the diffraction peaks between 12 and 18 degree 2{theta} as a function of pressure. The rapid decrease of the intensity suggests evolution of positional disorder in the high-pressure tetragonal phase. Highlights: Black-Right-Pointing-Pointer First in-situ X-ray diffraction and Raman study of cubic silver molybdate at high pressure. Black-Right-Pointing-Pointer Commencement of a structural transition to a tetragonal phase is found at 2.3 GPa. Black-Right-Pointing-Pointer The high-pressure phase is found to have positional disorder. Black-Right-Pointing-Pointer A bulk modulus of 113 GPa is obtained from the equation of state.

36 MATERIALS SCIENCE↗

Magnetic properties and adsorptive performance of manganese–zinc ferrites/activated carbon nanocomposites

Owing to the unique microstructure and high specific surface area, activated carbon (AC) could act as an excellent adsorbent for wastewater treatment and good carrier for functional materials. In this paper, manganese–zinc ferrites (Mn{sub 0.5}Zn{sub 0.5}Fe{sub 2}O{sub 4}: MZF) were anchored into AC by hydrothermal method, resulting in the excellent magnetic response for AC nanocomposites in wastewater treatment. All results demonstrated the magnetic nanoparticles presented a spinel phase structure and existed in the pores of AC. The saturation magnetization (Ms) of MZF/AC nanocomposites increased with the ferrites content, while the pore volume and specific surface area declined. The Sample-5 possessed the specific surface area of 1129 m{sup 2} g{sup −1} (close to 1243 m{sup 2} g{sup −1} of AC) and Ms of 3.96 emu g{sup −1}. Furthermore, the adsorptive performance for organic dyes was studied and 99% methylene blue was adsorbed in 30 min. The magnetic AC nanocomposites could be separated easily from solution by magnetic separation technique. - Graphical abstract: The Sample-5 presented both good magnetic response and high BET surface area up to 1129 m{sup 2} g{sup −1} (close to AC of 1243 m{sup 2} g{sup −1}), which could be separated completely for about 60 s. MZF/AC nanocomposites (Sample-3, 4, 5) in our work could be used as the magnetic absorbents, which could be separated easily by an outer magnet after the MB adsorption. - Highlights: • Mn{sub 0.5}Zn{sub 0.5}Fe{sub 2}O{sub 4} (MZF) as few as possible was implanted into activated carbon (AC) for the higher surface area. • Sample-5 possessed the high specific surface area (1129 m{sup 2} g{sup −1}) and the suitable Ms (3.96 emu g{sup −1}). • Methylene blue was adsorbed almost completely by MZF/AC nanocomposites in 30 min. • MZF/AC nanocomposites were separated easily from solution by magnetic separation technique.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Syntheses, structural variants and characterization of AInM′S{sub 4} (A=alkali metals, Tl; M′ = Ge, Sn) compounds; facile ion-exchange reactions of layered NaInSnS{sub 4} and KInSnS{sub 4} compounds

Ten AInM′S{sub 4} (A=alkali metals, Tl; M′= Ge, Sn) compounds with diverse structure types have been synthesized and characterized by single crystal and powder X-ray diffraction and a variety of spectroscopic methods. They are wide band gap semiconductors. KInGeS{sub 4}(1-β), RbInGeS{sub 4}(2), CsInGeS{sub 4}(3-β), TlInGeS{sub 4}(4-β), RbInSnS{sub 4}(8-β) and CsInSnS{sub 4}(9) compounds with three-dimensional BaGa{sub 2}S{sub 4} structure and CsInGeS{sub 4}(3-α) and TlInGeS{sub 4}(4-α) compounds with a layered TlInSiS{sub 4} structure have tetrahedral [InM′S{sub 4}]{sup −} frameworks. On the other hand, LiInSnS{sub 4}(5) with spinel structure and NaInSnS{sub 4}(6), KInSnS{sub 4}(7), RbInSnS{sub 4}(8-α) and TlInSnS{sub 4}(10) compounds with layered structure have octahedral [InM′S{sub 4}]{sup −} frameworks. NaInSnS{sub 4}(6) and KInSnS{sub 4}(7) compounds undergo facile topotactic ion-exchange, at room temperature, with various mono-, di- and tri-valent cations in aqueous medium to give rise to metastable layered phases. - Graphical abstract: NaInSnS{sub 4} and KInSnS{sub 4} compounds undergo, in aqueous medium at room temperature, facile topotactic ion-exchange with mono, di and trivalent cations. Display Omitted - Highlights: • Ten AInM′S{sub 4} compounds with diverse structure types were synthesized. • They are wide band gap semiconductors. • NaInSnS{sub 4} and KInSnS{sub 4} compounds undergo facile topotactic ion-exchange at room temperature.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Preparation and characterization of LiNiVO{sub 4} powder and non-stoichiometric LiNi{sub x}V{sub y}O{sub z} films

Inverse spinel type structured oxide, LiNiVO{sub 4}, was synthesized by using solid-state method and the crystalline powder was characterized by Rietveld refinement and X-ray photoelectron spectroscopy. Non-stoichiometric lithium nickel vanadate thin films were prepared by physical vapour deposition technique. The amorphous films were characterized by Rutherford back-scattering spectroscopy (RBS), nuclear reaction analysis (NRA), Auger electron spectroscopy (AES), X-ray diffraction (XRD), scanning electron microscopy (SEM) and high-resolution transmission electron microscopy (HRTEM) analytical methods. Films crystal growth at various temperatures was also studied by XRD and SEM. The HRTEM analysis of sputtered film shows nanocrystalline domains of NiO and LiNiVO{sub 4} phases with characteristic lattice parameters of the host compound and the results correlate well with the XRD data. Electrochemical properties of the films were discussed.

36 MATERIALS SCIENCE↗

Gel- to -crystallite conversion technique for the syntheses of M-{beta}/{beta}''-alumina (M = Li, Na, K, Rb, Ca or Eu)

Various alkali and alkaline earths hydroxides are reacted with hydrated alumina gel Al{sub 2}O{sub 3}.nH{sub 2}O (80 < n < 120) in hydrophilic organic solvents to yield precursor(s) with metal cation entrapped in the matrix, with the general formula M{sub y}AlO{sub y}(OH){sub 3-y} (where M = Li, Na, K, Rb, Ca and Eu). Depending on the cation, the precursor crystallizes as metal-inserted gibbsite or boehmite structure. The nature of the precursor depends on the size of the cation, and its concentration, solvent used, solvent/water ratio, etc. These precursors yield M-{beta}/{beta}''-alumina phase on calcination at elevated temperatures in the case of sodium, potassium and rubidium. In the case of lithium, LiAl{sub 5}O{sub 8} (spinel) phase is obtained. While calcium and europium give rise to calcium hexaaluminate and EuAlO{sub 3} (perovskite), respectively, on calcination. The need of metal ion-inserted-{gamma}-alumina phase is emphasized in obtaining M-{beta}/{beta}''-alumina phase.

36 MATERIALS SCIENCE↗

Electrical properties of MgAl{sub 2-2x}Zr{sub x}M{sub x}O{sub 4} (M = Co, Ni and x = 0.00-0.20) synthesized by coprecipitation technique using urea

This paper presents the results of a study concerning the structural and electrical properties of MgAl{sub 2-2x}Zr{sub x}M{sub x}O{sub 4} (x = 0.00-0.20 and M = Co{sup 2+} and Ni{sup 2+}) prepared by a coprecipitation technique using urea as a precipitating agent. The X-ray diffraction data for the pure and its doped samples are consistent with the single-phase spinel and their crystallite sizes are in the range 7-20 {+-} 4 nm. The DC resistivity increases from 3.09 x 10{sup 9} {omega} cm to 6.73 x 10{sup 9} and 8.06 x 10{sup 9} {omega} cm whereas dielectric constant decreases from 5.80 to 5.11 and 4.95 on doping with Zr-Co and Zr-Ni, respectively. The electrical resistivity variations with increase in the dopant contents indicate two types of conduction mechanisms in operation. Several parameters such as, hopping energy (W), metal-semiconductor transition temperature (T{sub MS}) and Debye temperature ({theta}{sub D}) have also been determined. The increase in DC resistivity and decrease in dielectric constant suggest that the synthesized materials can be considered for application as an insulating and structural material in fusion reactors.

36 MATERIALS SCIENCE↗

Optimized deposition and characterization of nanocrystalline magnesium indium oxide thin films for opto-electronic applications

Transparent conducting magnesium indium oxide films (MgIn{sub 2}O{sub 4}) were deposited on to quartz substrates without a buffer layer at an optimized deposition temperature of 450 deg. C to achieve high transmittance in the visible spectral range and electrical conductivity in the low temperature region. Magnesium ions are distributed over the tetrahedral and octahedral sites of the inverted spinel structure with preferential orientation along (3 1 1) Miller plane. The possible mechanism that promotes conductivity in this system is the charge transfer between the resident divalent (Mg{sup 2+}) and trivalent (In{sup 3+}) cations in addition to the available oxygen vacancies in the lattice. A room temperature electrical conductivity of 1.5 x 10{sup -5} S cm{sup -1} and an average transmittance >75% have been achieved. Hall measurements showed n-type conductivity with electron mobility value 0.95 x 10{sup -2} cm{sup 2} V{sup -1} s{sup -1} and carrier concentration 2.7 x 10{sup 19} cm{sup -3}. Smoothness of the film surface observed through atomic force microscope measurements favors this material for gas sensing and opto-electronic device development.

36 MATERIALS SCIENCE↗

Synthesis, dielectric behavior and impedance measurement studies of Cr-substituted Zn-Mn ferrites

Graphical abstract: Variation of dielectric constant with frequency. Research highlights: {yields} Sol-gel route synthesized spherical crystalline nanoparticles of ZnMn{sub 1-x}Cr{sub x}FeO{sub 4}. {yields} XRD, DTA, FTIR, SEM, dielectric and impedance study. {yields} The ferrites show concentration dependence of ac electrical conductivity. {yields} Impedance response is dominated by grain boundary behavior. -- Abstract: Nanocrystalline ZnMn{sub 1-x}Cr{sub x}FeO{sub 4} (1.0 {>=} x {>=} 0) ferrites were synthesized by sol-gel technique. X-ray diffraction (XRD) confirmed the formation of single phasic cubic spinel lattice for all the compositions studied. Lattice parameter shows a decreasing trend with an increase in Cr content in the compositions. Formation of spherical nanoparticles was revealed by scanning electron microscopy (SEM) analysis. Infrared spectroscopic studies revealed two main absorption bands in the range 400-800 cm{sup -1} arising due to tetrahedral (A) and octahedral (B) site vibrations. Dielectric constant, dielectric loss tangent, ac conductivity and complex impedance were measured as a function of frequency in the range 20 Hz to 1 MHz. Frequency dependence of dielectric constant shows dielectric dispersion due to the Maxwell-Wagner type of interfacial polarization. The role of chromium in modifying structural and dielectric properties of these ferrites has been explained.

36 MATERIALS SCIENCE↗

CTAB-assisted sol-gel synthesis of Li{sub 4}Ti{sub 5}O{sub 12} and its performance as anode material for Li-ion batteries

Graphical abstract: Discharge capacity versus cycle number of Li{sub 4}Ti{sub 5}O{sub 12} samples synthesized by (a) CTAB-assisted sol-gel and (b) normal sol-gel method. Highlights: {yields} CTAB-assisted sol-gel route for the synthesis of nano-size Li{sub 4}Ti{sub 5}O{sub 12}. {yields} CTAB directs the microstructure of the gels and helps to control the particle size of Li{sub 4}Ti{sub 5}O{sub 12}. {yields} Li{sub 4}Ti{sub 5}O{sub 12} exhibits promising cycling performance with initial capacity of 174 mAh g{sup -1} and sustains {approx}94% beyond 30 cycles. -- Abstract: A simple CTAB-assisted sol-gel technique for synthesizing nano-sized Li{sub 4}Ti{sub 5}O{sub 12} with promising electrochemical performance as anode material for lithium ion battery is reported. The structural and morphological properties are investigated by X-ray diffraction (XRD) and scanning electron microscopy (SEM), respectively. The electrochemical performance of both samples (with and without CTAB) calcined at 800 {sup o}C is evaluated using Swagelok{sup TM} cells by galvanostatic charge/discharge cycling at room temperature. The XRD pattern for sample prepared in presence of CTAB and calcined at 800 {sup o}C shows high-purity cubic-spinel Li{sub 4}Ti{sub 5}O{sub 12} phase (JCPDS no. 26-1198). Nanosized-Li{sub 4}Ti{sub 5}O{sub 12} calcined at 800 {sup o}C in presence of CTAB exhibits promising cycling performance with initial discharge capacity of 174 mAh g{sup -1} ({approx}100% of theoretical capacity) and sustains a capacity value of 164 mAh g{sup -1} beyond 30 cycles. By contrast, the sample prepared in absence of CTAB under identical reaction conditions exhibits initial discharge capacity of 140 mAh g{sup -1} (80% of theoretical capacity) that fades to 110 mAh g{sup -1} after 30 cycles.

36 MATERIALS SCIENCE↗

Modification of the physical properties of semiconducting MgAl{sub 2}O{sub 4} by doping with a binary mixture of Co and Zn ions

Graphical abstract: Plot of (Co,Zn) content against normalized values of crystallite size, X-ray density and the dielectric constant. Highlights: Black-Right-Pointing-Pointer Co and Zn ions doped MgAl{sub 2}O{sub 4} nanomaterials. Black-Right-Pointing-Pointer Materials show better thermal stability in the temperature range of 298-1773 K. Black-Right-Pointing-Pointer High resistivity, high dielectric constant and loss observed in the doped materials. Black-Right-Pointing-Pointer Thermal conductivity and diffusivity are lowered and heat capacity is increased. Black-Right-Pointing-Pointer Three spin allowed electronic transitions of Co{sup 2+} at tetrahedral lattice sites. -- Abstract: The effects of doping of MgAl{sub 2}O{sub 4} by a binary mixture of Co and Zn ions on the absorbance, electrical resistivity, capacitance, thermal conductivity, heat capacity and thermal diffusivity are reported in this paper. The materials with the nominal composition Mg{sub 1-2x}(Co,Zn){sub x}Al{sub 2}O{sub 4} (x = 0.0-0.5) are synthesized by solution combustion synthesis assisted by microwave irradiation. The substituted spinels are produced with a Scherrer crystallite size of 18-23 nm, as opposed to 45 nm for undoped samples, indicated by X-ray diffraction and confirmed by transmission electron microscopy. These materials also show better thermal stability in the temperature range of 298-1773 K. Three strong absorption bands at 536, 577 and 630 nm are observed for the doped samples which are attributed to the three spin allowed ({sup 4}A{sub 2} (F) {yields} {sup 4}T{sub 1} (P)) electronic transitions of Co{sup 2+} at tetrahedral lattice sites while pure magnesium aluminate remains transparent in the whole spectral range. The semiconducting behavior of the materials is evident from the temperature dependence of the electrical resistivity. Resistivity and activation energy are higher for the substituted samples. Fitting of the resistivity data is achieved according to the hopping polaron model of solids. Both dielectric constant and loss increase on account of doping. The dielectric data are explained on the basis of space charge polarization. The thermal conductivity and diffusivity are lowered and the heat capacity is increased in the doped materials. Wiedemann-Franz's law is used to compute the electronic and lattice contributions towards the total thermal conductivity.

36 MATERIALS SCIENCE↗

Facile synthesis and characterization of ZnFe{sub 2}O{sub 4}/{alpha}-Fe{sub 2}O{sub 3} composite hollow nanospheres

Highlights: Black-Right-Pointing-Pointer ZnFe{sub 2}O{sub 4}/{alpha}-Fe{sub 2}O{sub 3} composite hollow nanospheres were successfully synthesized via a facile method. Black-Right-Pointing-Pointer Detailed structural, morphology and the phase composition were studied. Black-Right-Pointing-Pointer The incorporation of ZnFe{sub 2}O{sub 4} and {alpha}-Fe{sub 2}O{sub 3} gives an appropriate band gap value to utilize solar energy. -- Abstract: ZnFe{sub 2}O{sub 4}/{alpha}-Fe{sub 2}O{sub 3} composite hollow nanospheres were successfully fabricated via a facile one-pot solvothermal method, utilizing polyethylene glycol as soft template. X-ray diffraction and scanning electron microscopy analysis revealed that the prepared nanospheres with cubic spinel and rhombohedra composite structure had a uniform diameter of about 370 nm, and the hollow structure could be further confirmed by transmission electron microscopy. Energy dispersive X-ray, X-ray photoelectron spectroscopy and Fourier transform infrared techniques were also applied to characterize the elemental composition and chemical bonds in the hollow nanospheres. The ZnFe{sub 2}O{sub 4}/{alpha}-Fe{sub 2}O{sub 3} composite hollow nanospheres show attractive light absorption property for potential applications in electronics, optics, and catalysis.

36 MATERIALS SCIENCE↗

Preparation, phase structure and microwave dielectric properties of CoLi{sub 2/3}Ti{sub 4/3}O{sub 4} ceramic

Graphical abstract: For chemical compatibility tests with silver electrode, mixtures of ceramic powders with 20 wt% Ag powders were cofired and analyzed to detect interactions between the low-fired samples and electrodes. XRD patterns and backscattered electron image of CoLi{sub 2/3}Ti{sub 4/3}O{sub 4} ceramics added with 1.5 wt% BCB cofired with Ag at 900 Degree-Sign C for 2 h are presented in . Backscattered electron image analysis reveals no interaction to form new phases after firing. This observation is also confirmed by the evidence of no difference between the XRD patterns before and after firing. It is obvious that the reaction of low-fired CoLi{sub 2/3}Ti{sub 4/3}O{sub 4} ceramics with Ag electrodes did not occur. Highlights: Black-Right-Pointing-Pointer A new microwave dielectric ceramic with good properties was reported. Black-Right-Pointing-Pointer The addition of BaCu(B{sub 2}O{sub 5}) can lower the sintering temperature from 1050 Degree-Sign C to 900 Degree-Sign C. Black-Right-Pointing-Pointer The addition of BaCu(B{sub 2}O{sub 5}) does not induce degradation of properties. Black-Right-Pointing-Pointer BCB added CoLi{sub 2/3}Ti{sub 4/3}O{sub 4} ceramics can co-fire with Ag electrode. -- Abstract: A new low loss microwave dielectric ceramic with composition of CoLi{sub 2/3}Ti{sub 4/3}O{sub 4} was prepared by a conventional solid-state reaction method. The compound has a cubic spinel structure [Fd-3m (227)] similar to MgFe{sub 2}O{sub 4} with lattice parameters of a = 8.3939 Angstrom-Sign , V = 591.42 Angstrom-Sign {sup 3}, Z = 8 and {rho} = 4.30 g/cm{sup 3}. This ceramic has a low sintering temperature ({approx}1050 Degree-Sign C) and good microwave dielectric properties with relative permittivity of 21.4, Q Multiplication-Sign f value of 35,000 GHz and {tau}{sub f} value of -22 ppm/ Degree-Sign C. Furthermore, the addition of BaCu(B{sub 2}O{sub 5}) (BCB) can effectively lower the sintering temperature from 1050 Degree-Sign C to 900 Degree-Sign C and does not induce much degradation of the microwave dielectric properties. Compatibility with Ag electrode indicates that the BCB added CoLi{sub 2/3}Ti{sub 4/3}O{sub 4} ceramics are good candidates for LTCC applications.

36 MATERIALS SCIENCE↗

Low temperature synthesis of nanocrystalline magnesium aluminate with high surface area by surfactant assisted precipitation method: Effect of preparation conditions

Highlights: ► MgAl{sub 2}O{sub 4} showed a high surface area and nanocrystalline structure. ► Addition of polymeric surfactant affected the structural properties of MgAl{sub 2}O{sub 4}. ► MgAl{sub 2}O{sub 4} prepared with surfactant showed a hollow cylindrical shape. -- Abstract: A surfactant assisted co-precipitation method was employed for the low temperature synthesis of magnesium aluminate spinel with nanocrystalline size and high specific surface area. Pluronic P123 triblock copolymer and ammonia solution were used as surfactant and precipitation agent, respectively. The prepared samples were characterized by thermal gravimetric and differential thermal gravimetric analyses (TG/DTG), X-ray diffraction (XRD), N{sub 2} adsorption (BET) and transmission electron microscopy (TEM) techniques. The effects of several process parameters such as refluxing temperature, refluxing time, pH, P123 to metals mole ratio (P123/metals) and calcination temperature on the structural properties of the samples were investigated. The obtained results showed that, among the process parameters pH and refluxing temperature have a significant effect on the structural properties of samples. The results revealed that increase in pH from 9.5 to 11 and refluxing temperature from 40 °C to 80 °C increased the specific surface area of prepared samples in the range of 157–188 m{sup 2} g{sup −1} and 162–184 m{sup 2} g{sup −1}, respectively. The XRD analysis showed the single-phase MgAl{sub 2}O{sub 4} was formed at 700 °C.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Investigation on effects of surface morphologies on response of LPG sensor based on nanostructured copper ferrite system

Graphical abstract: Figure shows the variations in resistance with time for copper ferrite system synthesized in various molar ratio. A maximum variation in resistance was observed for copper ferrite prepared in 1:1 molar ratio. Highlights: ► Evaluation of structural, optical and surface morphologies. ► Significant variation in LPG sensing properties. ► Surface modification of ferric oxide pellet by copper ferrite. ► CuFe{sub 2}O{sub 4} pellets for LPG sensing at room temperature. -- Abstract: Synthesis of a copper ferrite system (CuFe{sub 2}O{sub 4}) via chemical co-precipitation method is characterized by X-ray diffraction, surface morphology (scanning electron microscope) and optical absorption spectroscopy. These characteristics show their dependence on the relative compositions of the two subsystems. They are further confirmed by the variation in the band gap. A study of gas sensing properties shows the spinel CuFe{sub 2}O{sub 4} synthesized in 1:1 molar ratio exhibit best response to LPG adsorption/resistance measurement. Thus resistance based LPG sensor is found robust, cheap and may be applied for kitchens and industrial applications.

36 MATERIALS SCIENCE↗

Synthesis of monodispersed ZnAl{sub 2}O{sub 4} nanoparticles and their tribology properties as lubricant additives

Graphical abstract: Display Omitted Highlights: ► The preparation of ZnAl{sub 2}O{sub 4} nanoparticles was realized by hydrothermal method. ► After surface modification, ZnAl{sub 2}O{sub 4} nanoparticles of narrow size distribution can disperse in lubricating oil stably. ► The modified ZnAl{sub 2}O{sub 4} nanoparticles as lubricating oil additives exhibit good tribology properties. -- Abstract: Monodispersed spherical zinc aluminate spinel (ZnAl{sub 2}O{sub 4}) nanoparticles were synthesized via a solvothermal method and modified by oleic acid in cyclohexanol solution. The nanoparticles were characterized by X-ray diffraction (XRD), scanning electron microscope (SEM) and infrared spectrum (IR). The dispersion ability of nanoparticles in lubricant oil was measured with optical absorbance spectrum. The results show that the modified nanoparticles are nearly monodispersed and can stably disperse in lubricant oil. The tribological properties of the ZnAl{sub 2}O{sub 4} nanoparticles as an additive in lubricant oil were evaluated with four-ball test and thrust-ring test. For comparison, ZnO and Al{sub 2}O{sub 3} nanoparticles as additive in lubricant oil were also tested respectively. The results show that ZnAl{sub 2}O{sub 4} nanoparticles exhibit better tribology properties in terms of anti-wear and anti-friction than ZnO or Al{sub 2}O{sub 3} nanoparticles. The anti-friction and anti-wear mechanisms were discussed and the lubricating effect of ZnAl{sub 2}O{sub 4} nanoparticles can be attributed to nano-bearings effect and tribo-sintering mechanism.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Hydrothermal synthesis of Li{sub 4}Ti{sub 5}O{sub 12}/C nanostructured composites: Morphology and electrochemical performance

Graphical abstract: Display Omitted Highlights: ► Nanostructured composite Li{sub 4}Ti{sub 5}O{sub 12}/C was obtained hydrothermally. ► The amount of carbon black influenced significantly the morphology of the composite. ► Rate capability of Li{sub 4}Ti{sub 5}O{sub 12} was improved by the synthesis in presence of carbon black. ► Coulombic capacity of 150 mAh g{sup −1} was obtained at a discharging rate of even 10 C. -- Abstract: Li{sub 4}Ti{sub 5}O{sub 12}/C composites with low (3 wt.%) and high (33 wt.%) carbon black content as well as carbon-free Li{sub 4}Ti{sub 5}O{sub 12} were prepared in two steps under identical conditions: hydrothermal reaction at 130 °C and post-calcination at 400 °C. The X-ray diffraction experiments confirmed the spinel structure of Li{sub 4}Ti{sub 5}O{sub 12} in all samples. The carbon content altered significantly the morphology of obtained micro/nanoparticles. The Li{sub 4}Ti{sub 5}O{sub 12}/C composite with the high carbon content showed the highest electrical conductivity (2.0 S cm{sup −1}), and displayed also extraordinary electrochemical performance: the cyclovoltammograms consisted of well defined reversible redox peaks at a scan rate as high as 10 mV s{sup −1}, while, by galvanostatic cycling, the coulombic capacity of 150 mAh g{sup −1} was evidenced at a discharging rate of 10 C.

36 MATERIALS SCIENCE↗

One-pot synthesis and visible light photocatalytic activity of monodispersed AgIn{sub 5}S{sub 8} microspheres

Graphical abstract: Display Omitted Highlights: ► Monodispersed AgIn{sub 5}S{sub 8} microspheres were prepared in a one-pot process. ► The process is environmental friendly. ► The AgIn{sub 5}S{sub 8} microspheres display high photocatalytic activity. -- Abstract: Monodispersed AgIn{sub 5}S{sub 8} microspheres were synthesized using a one-pot solution method and characterized with X-ray diffraction, UV–vis diffuse reflectance spectroscopy, scanning electron microscope, energy dispersive X-ray spectroscopy and N{sub 2} adsorption–desorption isotherm. The results indicated that the AgIn{sub 5}S{sub 8} microspheres were of cubic spinel structure and the mean diameter of about 0.5 μm. In addition, the visible light photocatalytic activity of AgIn{sub 5}S{sub 8} microspheres was also investigated at room temperature. The AgIn{sub 5}S{sub 8} microspheres showed very high photocatalytic activity for the degradation of methyl orange with a degradation efficiency of about 98% under visible light irradiation for 20 min.

36 MATERIALS SCIENCE↗

Investigation of structural and magnetic properties of Ni{sub 0.5}Zn{sub 0.5}Fe{sub 2}O{sub 4} nano powders prepared by self combustion method

Graphical abstract: Display Omitted Highlights: ► Ni{sub 0.5}Zn{sub 0.5}Fe{sub 2}O{sub 4} prepared by self combustion with uniform/nonuniform heating. ► Characterized using TEM, XRD, in-field Mössbauer and DC magnetometry. ► Leads to bimodal (S1) and very narrow size distribution (S2) type nano samples. ► S1 has magnetic properties of bulk Ni{sub 0.5}Zn{sub 0.5}Fe{sub 2}O{sub 4}. ► Although very even sized, S2 large magnetic anisotropy distribution. -- Abstract: Nano powders of Ni{sub 0.5}Zn{sub 0.5}Fe{sub 2}O{sub 4} have been synthesized by the self-combustion method at a relatively low temperature of 473 K under conditions of non-uniform and uniform heating. Rietveld fitting of X-ray diffractograms confirm the formation of the pure spinel phase in both samples. Transmission electron microscopy indicates that the sample prepared under non-uniform heating has a bimodal particle size distribution (average values 16 nm and 6 nm) while the one prepared under uniform heating has a very narrow particle size distribution (average size 4 nm). Low temperature, in-field Mössbauer spectroscopic studies clearly show surface spin contributions. The hyperfine fields and Curie temperature of the non-uniformly heated sample are in good agreement with those reported for the corresponding bulk samples. Despite having a very narrow particle size distribution, the uniformly heated sample has a large anisotropy distribution which is evident in the broad transition visible in the temperature dependent magnetization curve. It is also corroborated by the fact that the experimental magnetization curve at room temperature requires two Langevin functions for satisfactory reproduction.

36 MATERIALS SCIENCE↗