Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Simulation optimization”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,297 records · Page 72

Conductive Spray Paint Fabricated Cylindrical Coplanar Waveguide for Noncontact Liquid-Level Sensing

A noncontact liquid-level sensor using a cylindrical coplanar waveguide (CCPW) is proposed. The concept is demonstrated using a prototype device made by directly spraying conductive paint on the outer surface of a glass cylinder. The position of the air–liquid interface is measured using the time-domain reflection (TDR) signal from the CCPW. The geometric parameters of the prototype sensor were optimized using a full-wave simulation tool. The experimental results show that the prototype CCPW-based liquid-level sensor has a resolution of 29.8μm over a range of 210 mm at the sweeping frequency bandwidth of 500 MHz–4 GHz. The tradeoff between the resolution and the measurement range was discussed. The proposed sensor provides a low-cost, easy-to-fabricate, and noncontact method for liquid-level measurement, which has potential applications in fuel storage, chemical production, and wastewater treatment.

42 ENGINEERING↗

Distributed Load Shedding Application Architecture and Bi-Level Predictive Estimator Algorithm

Increasing penetrations of distributed renewables are decreasing the effectiveness of traditional decentralized under-frequency load shedding (UFLS) schemes. As more distribution circuits begin to back-feed the transmission system, operation of traditional UFLS may exacerbate frequency instability. This paper presents the conceptual framework for a data-rich environment to coordinate UFLS across multiple distribution providers based on the laminar coordination framework in order to ensure optimal adaptive setting of UFLS relays. Communication and control are enabled through a distributed implementation of the IEC 61968-1 Common Information Model message bus structure. In addition to the proposed architecture, a novel adaptive UFLS scheme informed by a bi-level state estimator to create optimal relay setpoints is introduced. Initial simulation results are presented for the IEEE 14-bus test system on scenarios leading to mis-operation of traditional UFLS.

Anderson, Alexander A.↗

Visual Tool for Assessing Stability of DER Configurations on Three-Phase Radial Networks

Here, we present a method and tool for evaluating the placement of Distributed Energy Resources (DER) on distribution circuits in order to control voltages and power flows. Our previous work described Phasor-Based Control (PBC), a novel control framework where DERs inject real and reactive power to track voltage magnitude and phase angle targets. Here, we employ linearized power flow equations and integral controllers to develop a linear state space model for PBC acting on a three-phase unbalanced network. We use this model to evaluate whether a given inverter-based DER configuration admits a stable set of controller gains, which cannot be done by analyzing controllability nor by using the Lyapunov equation. Instead, we sample over a parameter space to identify a stable set of controller gains. Our stability analysis requires only a line impedance model and does not entail simulating the system or solving an optimization problem. We incorporate this assessment into a publicly available visualization tool and demonstrate three processes for evaluating many control configurations on the IEEE 123-node test feeder (123NF).

24 POWER TRANSMISSION AND DISTRIBUTION↗

Integrating Quantum Computing with High-Performance Computing: A Streamlined Approach

In recent years, quantum computing has demon-strated the potential to revolutionize specific algorithms and applications by solving problems exponentially faster than classical computers. However, its widespread adoption for general computing remains a future prospect. This paper discusses the integration of quantum computing within High-Performance Computing (HPC) environments, focusing on a resource management framework designed to streamline quantum simulators' use and enhance runtime performance and efficiency. The proposed framework facilitates hybrid applications' transition from simulation backends to real quantum hardware, optimizing resource utilization and providing a flexible infrastructure for developing and testing quantum algorithms.

Shehata, Amir↗

Improved Performance of Asymptotically Optimal Rapidly Exploring Random Trees

Three algorithms that improve the performance of the asymptotically optimal Rapidly exploring Random Tree (RRT*) are presented here. First, we introduce the Goal Tree (GT) algorithm for motion planning in dynamic environments where unexpected obstacles appear sporadically. The GT reuses the previous RRT* by pruning the affected area and then extending the tree by drawing samples from a shadow set. The shadow is the subset of the free configuration space containing all configurations that have geodesics ending at the goal and are in conflict with the new obstacle. Smaller, well defined, sampling regions are considered for Euclidean metric spaces and Dubins' vehicles. Next, the Focused-Refinement (FR) algorithm, which samples with some probability around the first path found by an RRT*, is defined. The third improvement is the Grandparent-Connection (GP) algorithm, which attempts to connect an added vertex directly to its grandparent vertex instead of parent. The GT and GP algorithms are both proven to be asymptotically optimal. Finally, the three algorithms are simulated and compared for a Euclidean metric robot, a Dubins' vehicle, and a seven degrees-of-freedom manipulator.

42 ENGINEERING↗

Convolutional Neural Network Surrogate Models for the Mechanical Properties of Periodic Structures

The work in this paper describes neural network surrogate models for calculating the effective mechanical properties of a periodic composites. The models achieve good accuracy even when only provided with training data sampling a small portion of the design space. As an example, the surrogate models are applied to solving the inverse design problem of finding structures with optimal mechanical properties. The surrogate models are sufficiently accurate to recover optimal solutions in general agreement with established topology optimization methods. However, improvements will be required to develop robust, efficient neural network-based surrogate models and several directions for future research are highlighted here.

42 ENGINEERING↗

Pillars of the Mantle: Imaging the Interior of the Earth with Adjoint Tomography. In: PEARC17 Proceedings of the Practice and Experience in Advanced Research Computing 2017 on Sustainability, Success and Impact, Article No. 75

In this work, we investigate global seismic tomographic models obtained by spectral-element simulations of seismic wave propagation and adjoint methods. Global crustal and mantle models are obtained based on an iterative conjugate-gradient type of optimization scheme. Forward and adjoint seismic wave propagation simulations, which result in synthetic seismic data to make measurements and data sensitivity kernels to compute gradient for model updates, respectively, are performed by the SPECFEM3D_GLOBE package [1] [2] at the Oak Ridge Leadership Computing Facility (OLCF) to study the structure of the Earth at unprecedented levels. Using advances in solver techniques that run on the GPUs on Titan at the OLCF, scientists are able to perform large-scale seismic inverse modeling and imaging. Using seismic data from global and regional networks from global CMT earthquakes, scientists are using SPECFEM3D_GLOBE to understand the structure of the mantle layer of the Earth. Visualization of the generated data sets provide an effective way to understand the computed wave perturbations which define the structure of mantle in the Earth.

Pugmire, David↗

Lightweight Detection of Cache Conflicts

In memory hierarchies, caches perform an important role in reducing average memory access latency. Minimizing cache misses can yield significant performance gains. As set-associative caches are widely used in modern architectures, capacity and conflict cache misses co-exist. These two types of cache misses require different optimization strategies. While cache misses are commonly studied using cache simulators, state-of-the-art simulators usually incur hundreds to thousands of times a program’s execution runtime. Moreover, a simulator has difficulty in simulating complex real hardware. To overcome these limitations, measurement methods are proposed to directly monitor program execution on real hardware via performance monitoring units. However, existing measurement-based tools either focus on capacity cache misses or do not distinguish capacity and conflict cache misses. In this paper, we design and implement CCProf, a lightweight measurement-based profiler that identifies conflict cache misses and associates them with program source code and data structures. CCProf incurs moderate runtime overhead that is at least an order of magnitude lower than simulators. With the evaluation on a number of representative programs, CCProf is able to guide optimizations on cache conflict misses and obtain nontrivial speedups.

Roy, Probir↗

MBMS1.0: An Open-Source Code for Modeling and Simulation of Membrane-Based Dehumidification and Energy Recovery

Air dehumidification processes are important and significantly impact both the performance of building ventilation and air conditioning systems, and the health of occupants. In a membrane-based dehumidifier, a permselective membrane is adopted to separate the two flow streams at feed and permeate sides. The feed side is continuously supplied with humid air at atmospheric pressure, while the permeate side is connected to a vacuum pump to produce vacuum or a low permeate vapor pressure as a driving force for water vapor permeation. The software MBMS 1.0 enables modeling and simulation of the design and configuration optimization of a membrane-based air-to-air (A2A) or air-to-vapor (A2V) device. A first-order physical-constant model was developed to reasonably account for the fundamental heat and mass transfer processes involved.

Gao, Zhiming↗

MrHyDE v.1.0

SAND2024-01324O MrHyDE, which stands for Multi-resolution Hybridized Differential Equations, is a general-purpose C++ package for the solution of coupled multiphysics and multiscale systems on massively parallel computing systems. MrHyDE is designed to enable moving beyond forward simulation for multiscale applications which includes optimization, control, uncertainty quantification, and stochastic inversion. The framework provides interfaces to several packages within the Trilinos framework and leverages automatic differentiation to enable adjoint capabilities for large-scale, gradient-based optimization. MrHyDE provides automated multiscale capabilities through a subgrid model interface and multiscale Dirichlet-to-Neumann maps. For extreme-scale applications, MrHyDE provides in situ data-compression algorithms to reduce memory requirements while maintaining performance. MrHyDE is a general-purpose, computational framework for the solution of multiscale and multiphysics applications. It uses a combination of structure-preserving, physics-compatible discretizations, fully implicit methods, multi-resolution schemes, or fully explicit methods. Sandia National Laboratories is a multimission laboratory managed and operated by National Technology & Engineering Solutions of Sandia, LLC, a wholly owned subsidiary of Honeywell International Inc., for the U.S. Department of Energy’s National Nuclear Security Administration under contract DE-NA0003525.

SciDAC↗

MiniMOD

SAND2025-03854O MiniMod is a user-friendly software tool designed to assess the performance of high-performance computing (HPC) systems. Researchers can use the program to test communication methods and computational tasks to understand how different setups can affect application efficiency. This software is particularly useful for optimizing network performance in scientific research, simulations, and data analysis. MiniMod‘s flexible design allows users to make informed decisions about their computing environments, which can enhance productivity and results in real-world applications. Sandia National Laboratories is a multimission laboratory managed and operated by National Technology & Engineering Solutions of Sandia, LLC, a wholly owned subsidiary of Honeywell International Inc., for the U.S. Department of Energy’s National Nuclear Security Administration under contract DE-NA0003525.

Dosanjh, Matthew [Sandia National Lab. (SNL-CA), L↗

Defects in MX2 Phases (DMX) Dataset: STEM Digital Twins

DFT is used to optimize defects in monolayer MX2 phases. We calculate ~600 optimized defect structures, then use multislice simulations in abTEM to generate STEM digital twins, which can be used to train experimental ML. The reference paper for procedures and demonstration of their utility is https://arxiv.org/abs/2305.02917, and the images here correspond with the discussed Messy dataset.

36 MATERIALS SCIENCE↗

Defects in MX2 (DMX) 2.0: STEM Digital Twins

DFT is used to optimize defects in monolayer MX2 phases. We calculate ~600 optimized defect structures, then use multislice simulations in abTEM to generate STEM digital twins, which can be used to train experimental ML. The reference paper for procedures and demonstration of their utility is https://arxiv.org/abs/2305.02917, and the images here correspond with the discussed Messy dataset. Version 2 includes an auxiliary dataset matched with experiment.

36 MATERIALS SCIENCE↗

Final Technical Report for DE-SC0012297

This is the final report on the work performed in award DE-SC0012297, Cosmic Frontier work in support of the LSST Dark Energy Science Collaboration's work to develop algorithms, simulations, and statistical tests to ensure optimal extraction of the dark energy properties from galaxy clusters observed with LSST. This work focused on effects that could produce a systematic error on the measurement of cluster masses (that will be used to probe the effects of dark energy on the growth of structure). These effects stem from the deviations from pure ellipticity of the gravitational lensing signal and from the blending of light of neighboring galaxies. Both these effects are expected to be more significant for LSST than for the stage III experiments such as the Dark Energy Survey. We calculate the magnitude of the mass error (or bias) for the first time and demonstrate that it can be treated as a multiplicative correction and calibrated out, allowing mass measurements of clusters from gravitational lensing to meet the requirements of LSST's dark energy investigation.

79 ASTRONOMY AND ASTROPHYSICS↗

Quantitative Prediction of Uranium Speciation and Amidoxime Binding in Seawater from Advanced Simulation Techniques

The goal of this project was to quantitatively predict stability of uranium species and thermochemistry of uranium binding with amidoxime ligands in realistic seawater conditions. The specific aims of the project were: (i) determine the stable species of uranium and its solvation structure in realistic seawater conditions; also speciation and solvation of uranium's major competing species in seawater, vanadium; (ii) accurately predict the free energies (and thereby stability constants) of binding between uranium and amidoxime; (iii) accurately predict the reaction enthalpies and entropies of binding between uranium and amidoxime as well as between vanadium and amidoxime. Main results and conclusions are as follows. First-principles molecular dynamic simulations found that the structure of the Ca 2 UO 2 (CO 3 ) 3 complex is very stable and that one Ca ion binds to the center UO 2 (CO 3 ) 3 4- anion stronger than the other Ca ion. This finding suggests that using time-resolved EXAFS spectra may confirm the asymmetry in binding of the two Ca ions in the aqueous Ca 2 UO 2 (CO 3 ) 3 complex. To consider the common ions, solvation of the Ca 2 UO 2 (CO 3 ) 3 complex in seawater was simulated by classical molecular dynamics simulation. It was found that the structure of the Ca 2 UO 2 (CO 3 ) 3 complex is very stable in the model seawater. A Na+ ion was found to be closely associated with the Ca 2 UO 2 (CO 3 ) 3 complex by indirectly interacting with one axial oxygen atom of the UO 2 group bridged by a water molecule. In addition, the Na + ion interacts closely with one Ca 2+ ion than the other. The present simulations revealed the key role of common ions such as Na + in impacting the solvation, structure, and apparent charge of the Ca 2 UO 2 (CO 3 ) 3 complex in seawater. The sequential processes of UO 2 2+ binding with the three CO 3 2- groups and the two Ca 2+ ions in pure water and in 0.1 M NaCl were simulated by classical molecular dynamics with both the non-constrained brute-force approach and umbrella sampling. The simulated free energies show excellent agreement with the experiment. The coordination structures of UO 2 (CO 3 ) 3 4- and CaUO 2 (CO 3 ) 3 2- were found to be significantly affected by the presence of Na + ions, leading to a monodentate binding of a carbonate group to U and a water molecule entering the first coordination shell of U. To shed light on the binding between uranyl and glutardiamidoxime (H 2 B), an important model and state-of-the-art ligand for seawater uranium extraction, a suite of computational methods was employed. From molecular dynamics (MD) simulations, it was found that the binding configurations of B 2- with uranyl favor the twofold distorted η 2 binding between the oximate ends (C=N-O-) and U, while HB - prefers the chelating mode for the oximate end with the neutral end being solvated by water. The free energies of sequential ligand binding to form UO 2 B, [UO 2 B 2 ] 2- , and [UO 2 (HB)B] - were simulated with umbrella sampling and very good agreement with the experimental values was achieved, which corroborates the structural insights into the binding mode. State-of-the-art polymeric sorbents employ both amidoximate and carboxylate groups on the side chains to achieve optimal U uptake and selectivity, so we simulated the binding of a model amidoximate–carboxylate bifunctional ligand with uranyl. Classical MD and free-energy simulations in 0.5 M NaCl showed that the carboxylate group binds first to uranyl, leading to a loose intermediate state, and then, the amidoximate group binds, resulting in a more stable and tight chelate state. Binding of the second bifunctional ligand follows a similar process, and the two ligands prefer a trans configuration around the uranyl group. The simulated free energies indicate that the two bifunctional ligands bind with uranyl 14 kcal/mol stronger than the two ligands with only amidoximate groups, confirming an important synergy between amidoximate and carboxylate groups in binding uranyl.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

A Non-Hydrostatic Variable Resolution Atmospheric Model in ACME (Final Technical Report)

The project goals are divided into five main tasks to be accomplished over three years: Task 1: Implement a nonhydrostatic atmospheric dynamical core in ACME (via HOMME) Task 2: Improve load balancing in variable resolution simulations by extending Zoltan. Task 3: Optimize implicit-explicit time integrators for overcoming the vertical acoustic wave CFL limitation Task 4: Validate the NH dynamical core with DCMIP and AMIP tests on uniform and variable resolution grids Task 5: Apply the NH dynamical core to study and parameterize turbulent mountain stress and orographic gravity wave drag with ultra-high variable resolution grids This report only concerns contributions from the UC Davis team, which includes Co-PI Paul Ullrich, GSR/Postdoc Jorge Guerra, GSR Alan Rhoades, GSR Shiheng Duan, and GSR Jennifer Piaseczny. From the above list, the UC Davis team is responsible for contributions to Tasks 1, 3, 4 and 5.

54 ENVIRONMENTAL SCIENCES↗

Sorption Enhanced Mixed Matrix Membranes for Hydrogen (H 2 ) Purification and Carbon Dioxide (CO 2 ) Capture

The technical objective of this project was to develop sorption enhanced mixed matrix membranes with H 2 permeance of 500 gas permeance units (GPU) and H 2 /CO 2 selectivity of 30 at 150-200 °C. These membranes will be the central component in the design of membrane based systems for 90% capture of CO 2 from coal-derived syngas, with 95% CO 2 purity at a cost of electricity 30% less than baseline capture approaches. The unique approach in this proposal is to design crosslinked polymers containing Pd-based nanoparticles achieving strong H 2 sorption and size sieving ability and thus H 2 /CO 2 selectivity. The specific objectives for each budget period (BP) are described below. BP 1: Identify polymer matrix with strong size sieving ability and palladium (Pd)-containing nanomaterials to prepare freestanding mixed matrix films with H 2 permeability of 50 Barrer and H 2 /CO 2 selectivity of 30 at 150-200°C with simulated syngas. BP 2: Prepare and optimize thin film mixed matrix composite membranes materials with H 2 permeance of 500 GPU and H 2 /CO 2 selectivity of 30 at 150-200 °C, and complete the modification of the membrane test unit for the field test in the BP 3. BP 3: Conduct a 20-day field test of the membranes with real syngas at Center for Advanced Energy Research (CAER) of the University of Kentucky (UKy). During the BP2, we have successfully prepared thin-film composite (TFC) membranes based on mixed matrix materials (MMMs) containing Pd nanoparticles in polymers, and demonstrated their superior and robust performance for H 2 /CO 2 separation at 150 – 225 °C. (1) Production of the Pd based nanoparticles with a diameter of 4 nm has been scaled up to 200 mg/day. (2) We have prepared TFC membranes with H 2 permeance above 500 GPU and H 2 /CO 2 selectivity above 30 at temperatures up to 225 °C, which meet the targets for the BP2. (3) We have conducted parametric studies of TFC membranes with a mixed gas containing H 2 S and H 2 O and demonstrated the stability of the membranes. (4) We have established a new testing plan at the Center for Advanced Energy Studies (CAER) at the University of Kentucky because NCCC decided to shut down their gasifier. During this project, four Ph.D. students received the inter-disciplinary training and graduated, including Shailesh Konda, Maryam Omidvar, Deqiang Yin, and Lingxiang Zhu. One postdoctoral researcher (Dr. Liang Huang) and two Ph.D. students (Abhishek Kumar and Hien Nguyen) are involved in this project. The project leads to one provisional patent application, eight peer-reviewed articles, and one manuscript in preparation. The details are shown below.

01 COAL, LIGNITE, AND PEAT↗

Metaheuristic Optimization Tool

The metaheuristic optimization tool (MOT) is a generic python module for solving a real value, multiobjective, multidimensional optimization problem. Users design their optimization problem by defining search variables, simulations, evaluation metric functions, and constraints. Search variables and constraints are straightforwardly added via python object methods, while simulations and metric functions used for search variable set evaluation must be implemented as a python class. Final optimum result(s) are provided in a tabular text file, as well as search history if needed.

97 MATHEMATICS AND COMPUTING↗