Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “SEPARATION PROCESSES”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,297 records · Page 72

Mechanical Properties of Iron Alumininides Intermetallic Alloy with Molybdenum Addition

In this work, FeAl-based alloys with and without molybdenum addition were fabricated by sintering of mechanically alloyed powders in order to investigate the effect of molybdenum on iron aluminide mechanical properties. Bulk samples were prepared by mechanical alloying for 4 hours, pressing at 360 MPa and sintering at 1000 deg. C for 2 hours. The specimens were tested in compression at room temperature using Instron machine. The phase identification and microstructure of the consolidated material was examined by x-ray diffraction and scanning electron microscope correspondingly. Results show that 2.5 wt%Mo addition significantly increased the ultimate stress and ultimate strain in compressive mode due to solid solution hardening. However, the addition of Mo more than 2.5 wt% was accompanied by a reduction in both properties caused by the presence of Mo-rich precipitate particles.

36 MATERIALS SCIENCE↗

SUPERCONDUCTIVITY AND MICROSTRUCTURE OF V-TI ALLOY MULTIFILAMENT PREPARED BY DIFFUSION REACTION BETWEEN CONSTITUENT PURE-METAL SUBELEMENTS

We have succeeded in making a superconducting V--Ti alloy multifilament wire using the diffusion reaction between constituent pure-metal subelements, which can omit the melt-and-casting step and may reduce the fabrication cost. A monofilament billet prepared by restacking hexagonal Ti/V composites in a Cu/V tube and a multifilament billet by re-stacking such Cu/V/(Ti/V) composites in a Cu tube were hydrostatically extruded and drawn down to wires. Four kinds of heat treatment were investigated, with respect to mi-crostructure and superconducting properties; (1) an alloying heat treatment (HT{sub alloy}) which is carried out at the final size ('fs-HT{sub alloy}'),(2)HT{sub alloy} is followed by cold-working (W) down to the final size ('HT{sub alloy}+W{sub 1}'),(3) an precipitation heat treatment (HT{sub prec}) is carried out after the W stage ('HT{sub alloy}+W{sub 1}+HT{sub prec}') and (4) an intermediate HT{sub prec} is carried out during the W stage coming after the HT{sub alloy} stage ('HT{sub alloy}+W{sub 1}+HT{sub prec}+W{sub 2}'). The 'HT{sub alloy}+W{sub 1}+HT{sub prec}+W{sub 2}' treatment was found to be most effective in enhancing the critical current densities (J{sub c}), despite the HT{sub prec} treatment having slightly degraded the critical temperature (T{sub c}) and critical magnetic field (B{sub c2}). The highest B{sub c2} was obtained using the 'HT{sub alloy}+W{sub 1}' treatment, irrespective of the HT{sub alloy} temperatures.

36 MATERIALS SCIENCE↗

Initiation of a passivated interface between hafnium oxide and In(Ga)As(0 0 1)-(4x2)

Hafnium oxide interfaces were studied on two related group III rich semiconductor surfaces, InAs(0 0 1)-(4x2) and In{sub 0.53}Ga{sub 0.47}As(0 0 1)-(4x2), via two different methods: reactive oxidation of deposited Hf metal and electron beam deposition of HfO{sub 2}. The interfaces were investigated with scanning tunneling microscopy and spectroscopy (STS). Single Hf atom chemisorption sites were identified that are resistant to oxidation by O{sub 2}, but Hf islands are reactive to O{sub 2}. After e{sup -} beam deposition of <<1 ML of HfO{sub 2}, single chemisorption sites were identified. At low coverage (<1 ML), the n-type and p-type HfO{sub 2}/InGaAs(0 0 1)-(4x2) interfaces show p-type character in STS, which is typical of clean InGaAs(0 0 1)-(4x2). After annealing below 200 deg. C, full coverage HfO{sub 2}/InGaAs(0 0 1)-(4x2) (1-3 ML) has the surface Fermi level shifted toward the conduction band minimum for n-type InGaAs, but near the valence band maximum for p-type InGaAs. This is consistent with the HfO{sub 2}/InGaAs(0 0 1)-(4x2) interface being at least partially unpinned, i.e., a low density of states in the band gap. The partially unpinned interface results from the modest strength of the bonding between HfO{sub 2} and InGaAs(0 0 1)-(4x2) that prevents substrate atom disruption. The fortuitous structure of HfO{sub 2} on InAs(0 0 1)-(4x2) and InGaAs(0 0 1)-(4x2) allows for the elimination of the partially filled dangling bonds on the surface, which are usually responsible for Fermi level pinning.

36 MATERIALS SCIENCE↗

Residual Nuclei Production in the reaction {sup 136}Xe+ deuterium at 500 A MeV

More than six hundred nuclei produced in the fragmentation of {sup 136}Xe projectiles at 500 A MeV on a liquid deuterium target were identified using inverse kinematics at the GSI Fragment Separator (FRS). These data are relevant for understanding of spallation reactions.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Anion Exchange Behavior Of Ti, Zr, Hf, Nb And Ta As Homologues Of Rf And Db In Mixed HF--Acetone Solutions

We studied in detail the sorption behavior of Ti, Zr, Hf, Nb and Ta on AG 1 anion exchange resin in HF-acetone mixed solutions as a function of organic cosolvent and acid concentrations. Anion exchange behavior was found to be strongly acetone concentration dependent. The distribution coefficients of Ti, Zr, Hf and Nb increased and those of Ta decreased with increasing content of acetone in HF solutions. With increasing HF concentration anion exchange equilibrium analysis indicated the formation of fluoride complexes of group 4 elements with charge-3 and Ta---2. For Nb the slope of-2 increased up to-5. Optimal conditions for separation of the elements using AIX chromatography were found. Group 4 elements formed MF{sub 7}{sup 3-} (M = Ti, Zr, Hf) complexes whose sorption decreased Ti>Hf>Zr in reverse order of complex stability. This fact is of particular interest for studying ion exchange behavior of Rf compared to Ti. The advantages of studying chemical properties of Rf and Db in aqueous HF solutions mixed with organic solvents are briefly discussed.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Developments at ISOL Facilities: from ISOLDE towards EURISOL

In-flight separation and Isotope Separation On -Line (ISOL) are the two main methods for producing radioactive ion beams. A brief description of the ISOLDE facility at CERN, which has accumulated 50 years of experience of the ISOL technique is given. The HIE -ISOLDE project, which is a major upgrade of the energy and intensity of ISOLDE is described. The long-term plans for ISOL in Europe culminate with the EURISOL facility which has been developed within a pan-European design study. The EURISOL concept resulting from this study is presented.

43 PARTICLE ACCELERATORS↗

Comparison Of Expected Yields For Light Radioactive Beams At SPIRAL-1 And 2

Light-particles stable high-intensity beams (p, d, {sup 3,4}He...) will be available from the Linac driver accelerator of SPIRAL-2. Yields of neutron-deficient isotopes as well as of neutron-rich isotopes (by means of reactions with secondary neutrons) are compared with those presently available at the SPIRAL-1 facility. We explore, for light beams (Z<16) asked in the 'white book' of SPIRAL-2, the production methods taking into account the in-target yield but also the feasibility of making such beams by the ISOL method (considering reaction, target, thermal and release properties). We discuss some of the tests needed and planned. A comparison with the present and potentially attainable yields at SPIRAL-1 is presented.

43 PARTICLE ACCELERATORS↗

BigRIPS In-Flight Separator at RIKEN RI Beam Factory (RIBF)

The BigRIPS in-flight separator at RI Beam Factory (RIBF) at RIKEN Nishina Center, which became operational in March 2007, is used to produce a wide range of rare isotope (RI) beams by using not only projectile fragmentation but a lso in-flight fission. It is characterized by two major features: large acceptance and a two-stage structure. High capability of particle identification is also its important feature. Efficient RI beam production based on the in-flight scheme is made possible at RIBF by these features of the BigRIPS separator, allowing us to expand the accessible region of exotic nuclei to a large extent. In this report the overview and status of the BigRIPS separator are presented.

43 PARTICLE ACCELERATORS↗

Modeling of a negative ion source. III. Two-dimensional structure of the extraction region

The self-consistent production and transport of H{sup -} in the extraction region of a hybrid negative ion source is modeled by means of a two-dimensional particle-in-cell/Monte Carlo simulation. The normal coordinate and one parallel coordinate with respect to the plasma grid are considered to analyze the transport of negative ions. Results show that, in order to establish space charge compensation, the extraction of surface-produced negative ions is limited by the flux of positive ions directed toward the plasma grid surface. An electrostatic barrier appears just in front of the wall, reflecting the majority of surface-produced H{sup -} and reducing by this their extraction probability to only 8.5%. Results reproduce the experimentally observed influence of the plasma grid bias voltage on the extraction identifying as a key element the presence of a saddle point in the electric potential distribution.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Experimental Proposal to Study beta Decay Properties around N = 126 Nuclei Produced by Multi-Nucleon Transfer Reactions

The beta decay properties of the neutron-rich isotopes with neutron number N = 126, out of reach by any reaction well established so far, are very interesting from the astrophysical point of view. We will propose beta decay lifetime measurements with a new isotope separation system, which is supposed to separate a single species of the radioactive nuclei among target-like fragments produced via multi-nucleon transfer reactions in binary heavy ion collisions, by using a gas catcher cell combined with laser resonance ionization technique. The present proposal aims to measure beta decay properties of several nuclei around Aapprox200 with N = 126 and nearby nuclei by using a stable {sup 136}Xe beam on a {sup 198}Pt target.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Precipitation of heterogeneous nanostructures: Metal nanoparticles and dielectric nanocrystallites

Heterogeneous precipitation of nanocrystallites of metallic Bi and anatase was observed in CaO-Bi{sub 2}O{sub 3}-B{sub 2}O{sub 3}-Al{sub 2}O{sub 3}-TiO{sub 2} glass-ceramics. Addition of AlN reduced the Bi{sub 2}O{sub 3} to Bi metal nanoparticles, which were uniformly dispersed in the glass. After heat-treatment of the Bi-precipitated glass around the glass transition temperature, nanocrystalline anatase precipitated out without aggregation of the Bi metal particles. It was found that the anatase nanocrystal size was affected by the distance between a nanocrystal and a precipitated Bi nanoparticle. The glass-ceramic produced is a functional material containing a random dispersion of different types of nanoparticles with different dielectric constants.

36 MATERIALS SCIENCE↗

The study of oxygen molecules on Pt (111) surface with high resolution x-ray photoemission spectroscopy

By using high resolution x-ray photoelectron spectroscopy, we show that inelastic scattering of photoelectron at low temperature (30-50 K) generates two kinds of oxygen species on Pt (111) surface. Intense synchrotron radiation source dissociates oxygen molecules into chemisorbed atomic oxygen and induces the formation of PtO on the surface. Estimated coverage of dissociated atomic oxygen is 0.5 ML, suggesting possible formation of p(2x1) surface structure, while PtO coverage shows saturation coverage of 0.5 ML. Molecular oxygen dosed at 30 K undergoes thermally activated transition from physisorbed to chemisorbed state at around 40 K.

36 MATERIALS SCIENCE↗

Preliminary Study on Utilization of Carbon Dioxide as a Coolant of High Temperature Engineering Test Reactor with MOX and Minor Actinides Fuel

High temperature engineering test reactor (HTTR) is an uranium oxide (UO2) fuel, graphite moderator and helium gas-cooled reactor with 30 MW in thermal output and outlet coolant temperature of 950 deg. C. Instead of using helium gas, we have utilized carbon dioxide as a coolant in the present study. Beside that, uranium and plutonium oxide (mixed oxide, MOX) and minor actinides have been employed as a new fuel type of HTTR. Utilization of plutonium and minor actinide is one of the support system to non-proliferation issue in the nuclear development. The enrichment for uranium oxide has been varied of 6-20% with plutonium and minor actinides concentration of 10%. In this study, burnup period is 1100 days. The reactor cell calculation was performed by using SRAC 2002 code, with nuclear data library was derived from JENDL3.2. Reactor core calculation was done by using CITATION module. The result shows that HTTR can achieve its criticality condition with 14% of {sup 235}U enrichment.

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗

Influence of quenching rate on the magnetic and martensitic properties of Ni-Fe-Ga melt-spun ribbons

We have fabricated Ni-Fe-Ga {beta} single phase alloy ribbons with Ga content less than 25 at. %. Higher spinning rate of melt-spinning technique can produce {beta} single phase alloys without precipitation of {gamma} particles, whereas lower spinning rate results in the {beta}+{gamma} two phase structure. This higher quenching rate is found to be able to fully suppress the formation of {gamma} phase during fabrication. The martensitic and magnetic transition temperatures of {beta} phase ribbons are both above room temperature, and the ribbon show saturation magnetization as high as 56.5 emu/g at room temperature. These features are attractive for practical applications. The effects of quenching rate on microstructure, martensitic transformation, and magnetic properties are discussed.

36 MATERIALS SCIENCE↗

Rapid timing studies of black hole binaries in Optical and X-rays: correlated and non-linear variability

In a fast multi-wavelength timing study of black hole X-ray binaries (BHBs), we have discovered correlated optical and X-ray variability in the low/hard state of two sources: GX 339-4 and SWIFT J1753.5-0127. After XTE J1118+480, these are the only BHBs currently known to show rapid (sub-second) aperiodic optical flickering. Our simultaneous VLT/Ultracam and RXTE data reveal intriguing patterns with characteristic peaks, dips and lags down to very short timescales. Simple linear reprocessing models can be ruled out as the origin of the rapid, aperiodic optical power in both sources. A magnetic energy release model with fast interactions between the disk, jet and corona can explain the complex correlation patterns. We also show that in both the optical and X-ray light curves, the absolute source variability r.m.s. amplitude linearly increases with flux, and that the flares have a log-normal distribution. The implication is that variability at both wavelengths is not due to local fluctuations alone, but rather arises as a result of coupling of perturbations over a wide range of radii and timescales. These 'optical and X-ray rms-flux relations' thus provide new constraints to connect the outer and inner parts of the accretion flow, and the jet.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

On the hysteresis at ion extraction in the single-grid ion source

The ion extraction in the single-grid ion source with a woven extraction grid is researched. It has been found experimentally that the extraction can occur in ''low current'' and ''high current'' modes with stepwise hysteretic transitions between them. The assumption has been made that the existence of the two extraction regimes can be explained by the existence of two kinds of the space charge sheaths near the grid wires. This assumption is confirmed by the estimations of the sheath depth for the cylindrical and plane geometries.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

A high-accuracy extraction of the isoscalar {pi}N scattering length from pionic deuterium data

We present a high-accuracy calculation of the {pi}(bar sign)d scattering length using chiral perturbation theory up to order (M{sub {pi}/}m{sub p}){sup 7/2}. For the first time isospin-violating corrections are included consistently. The resulting value of a{sub {pi}-}bar{sub d} has a theoretical uncertainty of a few percent. We use it, together with data on pionic deuterium and pionic hydrogen atoms, to extract the isoscalar and isovector pion-nucleon scattering lengths from a combined analysis, and obtain a{sup +} (7.9{+-}3.2){center_dot}10{sup -3}M{sub {pi}}{sup -1} and a-bar (86.3{+-}1.0){center_dot}10{sup -3}M{sub {pi}}{sup -1}.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

The NuTeV anomaly: solved?

The NuTeV extraction of the Weinberg angle is reported to differ by 3{sigma} from measurements at the Z pole. We review various effects within the Standard Model, and conclude that corrections from these effects bring the NuTeV measurement within 1{sigma} of the expected result.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗