Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “SCALE MODELS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,297 records · Page 72

Calculation of a circular jet in crossflow with a multiple-time-scale turbulence model

Numerical calculation of a three dimensional turbulent flow of a jet in a crossflow using a multiple time scale turbulence model is presented. The turbulence in the forward region of the jet is in a stronger inequilibrium state than that in the wake region of the jet, while the turbulence level in the wake region is higher than that in the front region. The calculated flow and the concentration fields are in very good agreement with the measured data, and it indicated that the turbulent transport of mass, concentration, and momentum is strongly governed by the inequilibrium turbulence. The capability of the multiple time scale turbulence model to resolve the inequilibrium turbulence field is also discussed.

Kim, S.-W.↗

A multiple-time-scale turbulence model based on variable partitioning of the turbulent kinetic energy spectrum

A multiple-time-scale turbulence model of a single point closure and a simplified split-spectrum method is presented. In the model, the effect of the ratio of the production rate to the dissipation rate on eddy viscosity is modeled by use of the multiple-time-scales and a variable partitioning of the turbulent kinetic energy spectrum. The concept of a variable partitioning of the turbulent kinetic energy spectrum and the rest of the model details are based on the previously reported algebraic stress turbulence model. Example problems considered include: a fully developed channel flow, a plane jet exhausting into a moving stream, a wall jet flow, and a weakly coupled wake-boundary layer interaction flow. The computational results compared favorably with those obtained by using the algebraic stress turbulence model as well as experimental data. The present turbulence model, as well as the algebraic stress turbulence model, yielded significantly improved computational results for the complex turbulent boundary layer flows, such as the wall jet flow and the wake boundary layer interaction flow, compared with available computational results obtained by using the standard kappa-epsilon turbulence model.

Kim, S.-W.↗

Structural modeling of aircraft tires

A theoretical and experimental investigation of the feasibility of determining the mechanical properties of aircraft tires from small-scale model tires was accomplished. The theoretical results indicate that the macroscopic static and dynamic mechanical properties of aircraft tires can be accurately determined from the scale model tires although the microscopic and thermal properties of aircraft tires can not. The experimental investigation was conducted on a scale model of a 40 x 12, 14 ply rated, type 7 aircraft tire with a scaling factor of 8.65. The experimental results indicate that the scale model tire exhibited the same static mechanical properties as the prototype tire when compared on a dimensionless basis. The structural modeling concept discussed in this report is believed to be exact for mechanical properties of aircraft tires under static, rolling, and transient conditions.

Clark, S. K.↗

Addressing uncertainty in genome-scale metabolic model reconstruction and analysis

The reconstruction and analysis of genome-scale metabolic models constitutes a powerful systems biology approach, with applications ranging from basic understanding of genotype-phenotype mapping to solving biomedical and environmental problems. However, the biological insight obtained from these models is limited by multiple heterogeneous sources of uncertainty, which are often difficult to quantify. Here we review the major sources of uncertainty and survey existing approaches developed for representing and addressing them. A unified formal characterization of these uncertainties through probabilistic approaches and ensemble modeling will facilitate convergence towards consistent reconstruction pipelines, improved data integration algorithms, and more accurate assessment of predictive capacity.

59 BASIC BIOLOGICAL SCIENCES↗

Multiple-scale turbulence model in confined swirling jet predictions

A recently developed multiple-scale turbulence model which attempts to circumvent the deficiencies of earlier models by taking nonequilibrium spectral energy transfer into account is presented. The model's validity is tested by predicting the confined swirling coaxial jet flow in a sudden expansion. It is noted that, in order to account for anisotropic turbulence, a full Reynolds stress model is required.

Chen, C. P.↗

A Workflow to Rapidly Interrogate Multiscale Model Simulation Results Across Multiple Length Scales

Many tools can be used to visualize field and state variables for a single scale analysis so that the influence of relevant mechanisms can be evaluated. Finite element software is often utilized to simulate a unit cell of a material and visualize results at that scale. Material properties can be homogenized from individual constituents and local deformation, damage, and failure mechanisms can be evaluated within the unit cell due to globally applied boundary conditions. Such solutions can produce satisfactory results if a user is only interested in analyzing a single scale. But materials in general contain features across multiple length scales, and assumptions must be made when attempting to account for lower length scale phenomena within a higher length scale model. Multiscale modeling is an attractive means to model materials because detailed material responses can be tracked across multiple disparate length scales while reducing the amount of required assumptions. However, as the complexity of these models increases, a large amount of data can be produced, and data traceability can become increasingly more difficult. Field and state variables, which are naturally dependent on spatial position, may themselves be calculated from one or more lower length scale unit cell models each with their own appropriate field and state variables. The NASA Multiscale Analysis Tool (NASMAT) is one software that can be used to perform a multiscale analysis efficiently and output requested data at all length scales in the analysis. A companion open-source Python software, NASMAT PrePost, can be used to visualize NASMAT model results and rapidly interrogate multiscale data across multiple length scales. This presentation will demonstrate some of the key features of NASMAT PrePost on two multiscale problems by quickly displaying and demonstrating connectivity among multiscale results from large datasets.

Python↗

A water tunnel flow visualization study of the vortex flow structures on the F/A-18 aircraft

The vortex flow structures occurring on the F/A-18 aircraft at high angles of attack were studied. A water tunnel was used to gather flow visualization data on the forebody vortex and the wing leading edge extension vortex. The longitudinal location of breakdown of the leading edge vortex was found to be consistently dependent on the angle of attack. Other parameters such as Reynolds number, model scale, and model fidelity had little influence on the overall behavior of the flow structures studied. The lateral location of the forebody vortex system was greatly influenced by changes in the angle of sideslip. Strong interactions can occur between the leading edge extension vortex and the forebody vortex. Close attention was paid to vortex induced flows on various airframe components of the F/A-18. Reynolds number and angle of attack greatly affected the swirling intensity, and therefore the strength of the studied vortices. Water tunnel results on the F/A-18 correlated well with those obtained in similar studies at both full and sub scale levels. The water tunnel can provide, under certain conditions, good simulations of realistic flows in full scale configurations.

Sandlin, Doral R.↗

Laboratory scaled simulation of lidar cloud sounding experiments

The results of lidar measurements carried out on laboratory scale models of clouds are presented. Measurements on laboratory scale models are important since one has the knowledge of the relevant parameters of the diffusing medium, such as: scattering and absorption coefficients, phase function, homogeneity, shape, etc. Knowledge of these parameters enables one to use the results to test the reliability of theoretical and numerical investigations. To obtain a laboratory scaled model of a lidar system sounding a cloud, it is necessary to scale down all the geometrical quantities by the same factor to reduce distances of the order of kilometers to the order of meters, keeping the size and the optical depth of the diffusers unchanged. If a time resolution of the order of nanoseconds is necessary for a lidar sounding actual clouds, the corresponding time resolution for the laboratory model should be of the order of picoseconds. It is possible to obtain this resolution by using picosecond laser systems and fast electrooptical detectors like the streak camera. The results of the laboratory measurements showed that the multiple scattering effect strongly depends on the size of the diffusers, as well as on the concentration. The experimental results were compared with the numerical results of a Monte Carlo code. A generally good agreement was obtained.

Zaccanti, G.↗

Wave Energy

After reflecting on the history of ocean wave energy research and technology development, the most prominent classification schemes for wave energy converter (WEC) technology concepts are produced, highlighting the diversity of WEC technologies that were or are under development at different levels of maturity and intensity. Three advanced WEC technology examples are provided in this article. The ocean wave energy resource is addressed with respect to its global energy potential, local variability, and issues associated with the established forms of spectral power presentation. The spectrum of theoretical modeling approaches is described, along with the range of simulation tasks and related tools. This article also covers the specific aspects of the physical modeling and scaled model testing of WES systems and subsystems. Following a comparison of the engineering and design challenges of wave energy and wind energy technology development, the WEC technology development status and process is described and analyzed. Finally, the requirements for successful WEC technology development for achieving economic WEC technology and energy production under commercial conditions are discussed, including a number of possible development and innovation pathways.

16 TIDAL AND WAVE POWER↗

Experimental sloshing pressure impacts in ensemble domain: Transient and stationary statistical characteristics

The present paper focuses on the analysis of impact pressure registrations from repeated model scale sloshing experiments under harmonic rotational excitation. A series of more than 100 experiments, each one encompassing more than 100 impact events, has been conducted seeking the highest feasible repeatability. Different excitation periods, that cover the main features of the impact dynamics, have been considered in a preliminary screening, describing the main features of the impact dynamics. Since, even under a nominally deterministic excitation, the pressure at each impact is characterized by a high variability, a statistical approach is used treating the impact pressure as a stochastic process. For one selected excitation period, the statistical analysis focuses on the ensemble distribution of the maximum pressure during each impact event. Particular attention is given to the evolution of such distributions, in order to detect the variations in the statistical characteristics of the process. This is achieved by, first, identifying the presence and the length of the transient phase and, second, by characterizing the process at stationary state. The statistics of impact pressure for different peaks are discussed mostly in the ensemble domain. Linking the latter with the time domain analysis is made by checking that the problem can be considered “practically ergodic.” The “practical ergodicity” of the process is dealt with by checking to what extent steady state ensemble statistical information can be obtained from a single long run experiment. Statistical checks for correlation and independence of maximum impact pressures are also carried out to test the hypothesis of independent identically distributed random variables. The method of analysis presented in this paper through the considered example case is general in nature and is considered to be highly portable. In particular, it is considered to allow for a more thorough understanding of non-deterministic events such as those considered herein, by looking at them from a sound statistical perspective. The thorough description of the whole experimental setup makes the presented data suitable for comparison purposes and for validation of theoretical/numerical approaches.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Results of phase change heat transfer test OH51 using 0.006-scale space shuttle orbiter models 46-0 and 90-0 and partial wing 0.0175-scale model 64-0 in the LaRC 31-inch CFHT

Test OH51 was a phase change paint test conducted in the LaRC 31-inch CFHT utilizing models 46-0, 64-0, and 90-0. Model 46-0 represented the space shuttle configuration 139 Orbiter. Model 90-0 represented the configuration 140 Orbiter. Model 64-0 represented the forward 45% portion of the Orbiter wing. The partial wing was tested with a shock generator located at various positions relative to the wing. The test was conducted at Mach 10.0, angles of attack from 27.5 deg through 37.5 deg, and Reynolds numbers of 0.5 and 1.5 million per foot.

Cummings, J. W.↗

Broadband rotor noise analyses

The various mechanisms which generate broadband noise on a range of rotors studied include load fluctuations due to inflow turbulence, due to turbulent boundary layers passing the blades' trailing edges, and due to tip vortex formation. Existing analyses are used and extensions to them are developed to make more accurate predictions of rotor noise spectra and to determine which mechanisms are important in which circumstances. Calculations based on the various prediction methods in existing experiments were compared. The present analyses are adequate to predict the spectra from a wide variety of experiments on fans, full scale and model scale helicopter rotors, wind turbines, and propellers to within about 5 to 10 dB. Better knowledge of the inflow turbulence improves the accuracy of the predictions. Results indicate that inflow turbulence noise depends strongly on ambient conditions and dominates at low frequencies. Trailing edge noise and tip vortex noise are important at higher frequencies if inflow turbulence is weak. Boundary layer trailing edge noise, important, for large sized rotors, increases slowly with angle of attack but not as rapidly as tip vortex noise.

George, A. R.↗

Facility requirements for helicopter noise research

Development of future helicopter noise prediction methods requires an accurate experimental data base for correlation studies or assessment of theoretical prediction methods. The aerodynamic and acoustic performance criteria for conducting experimental studies of helicopter noise using existing test facilities were defined. Requirements for ground-based facilities were described in addition to the limitations associated with full scale and model scale studies. Flight testing methods were also evaluated briefly and the restrictions associated with these approaches were cited. Finally, a general evaluation of ground-based and flight testing methods is given. Based on this presentation, future investigators can select the experimental approach best suited for generating a desired data base. Also, facility improvements need to extend the state of the art in helicopter noise experimental studies so that problems can be identified.

Schlinker, R. H.↗

On-orbit damage detection and health monitoring of large space trusses - Status and critical issues

The literature in the fields of structural identification, mode shape expansion and orthogonalization, and on-orbit damage location of large space trusses is reviewed. The use of a Dynamic Scale Model Technology (DSMT) hybrid scale model for damage location research and as a universal test bed for other damage location methods is proposed as a means of comparing and evaluating existing and newly developed methods in the named areas. Issues concerning on-orbit data acquisition, data accuracy, and data quality relevant to structural dynamic system identification which require extensive research are identified.

Kashangaki, Thomas A.-L.↗

CFD flowfield simulation of Delta Launch Vehicles in a power-on configuration

This paper summarizes recent work at McDonnell Douglas Aerospace (MDA) to develop and validate computational fluid dynamic (CFD) simulations of under expanded rocket plume external flowfields for multibody expendable launch vehicles (ELVs). Multi engine reacting gas flowfield predictions of ELV base pressures are needed to define vehicle base drag and base heating rates for sizing external nozzle and base region insulation thicknesses. Previous ELV design programs used expensive multibody power-on wind tunnel tests that employed chamber/nozzle injected high pressure cold or hot-air. Base heating and pressure measurements were belatedly made during the first flights of past ELV's to correct estimates from semi-empirical engineering models or scale model tests. Presently, CFD methods for use in ELV design are being jointly developed at the Space Transportation Division (MDA-STD) and New Aircraft Missiles Division (MDA-NAMD). An explicit three dimensional, zonal, finite-volume, full Navier-Stokes (FNS) solver with finite rate hydrocarbon/air and aluminum combustion kinetics was developed to accurately compute ELV power-on flowfields. Mississippi State University's GENIE++ general purpose interactive grid generation code was chosen to create zonal, finite volume viscous grids. Axisymmetric, time dependent, turbulent CFD simulations of a Delta DSV-2A vehicle with a MB-3 liquid main engine burning RJ-1/LOX were first completed. Hydrocarbon chemical kinetics and a k-epsilon turbulence model were employed and predictions were validated with flight measurements of base pressure and temperature. Zonal internal/external grids were created for a Delta DSV-2C vehicle with a MB-3 and three Castor-1 solid motors burning and a Delta-2 with an RS-27 main engine (LOX/RP-1) and 9 GEM's attached/6 burning. Cold air, time dependent FNS calculations were performed for DSV-2C during 1992. Single phase simulations that employ finite rate hydrocarbon and aluminum (solid fuel) combustion chemistry are currently in progress. Reliable and efficient Eulerian algorithms are needed to model two phase (solid-gas) momentum and energy transfer mechanisms for solid motor fuel combustion products.

Pavish, D. L.↗