SEARCH · Engineering Papers
Results for “R MATRIX”
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Matrix-Assisted Ionization of Molecular Uranium Species
Matrix-assisted ionization (MAI) demonstrates high sensitivity for a variety of organic compounds; however, few studies have reported the application of MAI for the detection and characterization of inorganic analytes. Trace-level uranium analysis is important in the realms of nuclear forensics, nuclear safeguards, and environmental monitoring. Traditional mass spectrometry methods employed in these fields require combinations of extensive laboratory chemistry sample preparation and destructive ionization methods. There has been recent interest in exploring ambient mass spectrometry methods that enable timely sample analysis and higher sensitivity than what is attainable by field-portable radiation detectors. Rapid characterization of uranium at nanogram levels is demonstrated in this study using MAI techniques. Mass spectra were collected on an atmospheric pressure mass spectrometer for solutions of uranyl nitrate, uranyl chloride, uranyl acetate, and uranyl oxalate utilizing 3-nibrobenzonitrile as the ionization matrix. The uranyl complexes investigated were detectable, and the chemical speciation was preserved. Sample analysis was accomplished in a matter of seconds, and limits of detection of 5 ng of uranyl nitrate, 10 ng of uranyl oxalate, 100 ng of uranyl chloride, and 200 ng of uranyl acetate were achieved. The observed gas-phase speciation was similar to negative-ion electrospray ionization of uranyl compounds with notable differences. Six matrix-derived ions were detected in all negative-ion mass spectra, and some of these ions formed adducts with the uranyl analyte. Subsequent analysis of the matrix suggests that these molecules are not matrix contaminants and are instead created during the ionization process.
Size and spatial homogeneity of SiGe quantum dots in amorphous silica matrix
In this paper, we present a study of structural properties of SiGe quantum dots formed in amorphous silica matrix by magnetron sputtering technique. We investigate deposition conditions leading to the formation of dense and uniformly sized quantum dots, distributed homogeneously in the matrix. X-ray and Raman spectroscopy were used to estimate the Si content. A detailed analysis based on grazing incidence small angle x-ray scattering revealed the influence of the deposition conditions on quantum dot sizes, size distributions, spatial arrangement, and concentration of quantum dots in the matrix, as well as the Si:Ge content.
Statistical properties of filaments in the cosmic web
ABSTRACT In the context of the cosmological and constrained Exploring the Local Universe with the reConstructed Initial Density field (ELUCID) simulation, this study explores the statistical characteristics of filaments within the cosmic web, focussing on aspects such as the distribution of filament lengths and their radial density profiles. Using the classification of the cosmic web environment through the Hessian matrix of the density field, our primary focus is on how cosmic structures react to the two variables $R_{\rm s}$ and $\lambda _{\rm th}$. The findings show that the volume fractions of knots, filaments, sheets, and voids are highly influenced by the threshold parameter $\lambda _{\rm th}$, with only a slight influence from the smoothing length $R_{\rm s}$. The central axis of the cylindrical filament is pinpointed using the medial-axis thinning algorithm of the COsmic Web Skeleton (COWS) method. It is observed that median filament lengths tend to increase as the smoothing lengths increase. Analysis of filament length functions at different values of $R_{\rm s}$ indicates a reduction in shorter filaments and an increase in longer filaments as $R_{\rm s}$ increases, peaking around $2.5R_{\rm s}$. The study also shows that the radial density profiles of filaments are markedly affected by the parameters $R_{\rm s}$ and $\lambda _{\rm th}$, showing a valley at approximately $2R_{\rm s}$, with increases in the threshold leading to higher amplitudes of the density profile. Moreover, shorter filaments tend to have denser profiles than their longer counterparts.
Pure Yang–Mills Solutions on dS{sub 4}
We consider pure SU(2) Yang–Mills theory on four-dimensional de Sitter space dS{sub 4} and construct smooth and spatially homogeneous classical Yang–Mills fields. Slicing dS{sub 4} as R×S{sup 3}, via an SU(2)-equivariant ansatz we reduce the Yang–Mills equations to ordinary matrix differential equations and further to Newtonian dynamics in a particular three-dimensional potential. Its classical trajectories yield spatially homogeneous Yang–Mills solutions in a very simple explicit form, depending only on de Sitter time with an exponential decay in the past and future. These configurations have not only finite energy, but their action is also finite and bounded from below. We present explicit coordinate representations of the simplest examples (for the fundamental SU(2) representation). Instantons (Yang–Mills solutions on the Wick-rotated S{sup 4} ) and solutions on AdS{sub 4} are also briefly discussed.
NUCLEI (Nuclear Low-Energy Computational Initiative) [Contributions of the University of North Carolina]
This report details research done by the University of North Carolina as part of the SciDAC NUCLEI (Nuclear Low-Energy Computational Initiative) between 2012 and 2017. The work had two areas of focus: (a) the use of Energy-Density Functional (EDF) Theory to compute $\beta$-decay rates for essentially all nuclei so $r$-process nucleosynthesis can be better understood, and (b) the development of new techniques to compute the nuclear matrix elements that govern neutrinoless double-$\beta$ decay. On the first front, our work culminated in a table of $\beta$-decay rates for all neutron-rich even-even isotopes, and on the second in a combination of EDF theory and the shell model that allowed calculations in Hilbert spaces of unprecedented size. The reference list at the end of this report contains the most important publications under the grant.
Comparing Multipollutant Emissions-Based Mobile Source Indicators to Other Single Pollutant and Multipollutant Indicators in Different Urban Areas
A variety of single pollutant and multipollutant metrics can be used to represent exposure to traffic pollutant mixtures and evaluate their health effects. Integrated mobile source indicators (IMSIs) that combine air quality concentration and emissions data have recently been developed and evaluated using data from Atlanta, Georgia. IMSIs were found to track trends in traffic-related pollutants and have similar or stronger associations with health outcomes. In the current work, we apply IMSIs for gasoline, diesel and total (gasoline + diesel) vehicles to two other cities (Denver, Colorado and Houston, Texas) with different emissions profiles as well as to a different dataset from Atlanta. We compare spatial and temporal variability of IMSIs to single-pollutant indicators (carbon monoxide (CO), nitrogen oxides (NOx) and elemental carbon (EC)) and multipollutant source apportionment factors produced by Positive Matrix Factorization (PMF). Across cities, PMF-derived and IMSI gasoline metrics were most strongly correlated with CO (r = 0.31–0.98), while multipollutant diesel metrics were most strongly correlated with EC (r = 0.80–0.98). NOx correlations with PMF factors varied across cities (r = 0.29–0.67), while correlations with IMSIs were relatively consistent (r = 0.61–0.94). In general, singlepollutant metrics were more correlated with IMSIs (r = 0.58–0.98) than with PMF-derived factors (r = 0.07–0.99). A spatial analysis indicated that IMSIs were more strongly correlated (r > 0.7) between two sites in each city than single pollutant and PMF factors. These findings provide confidence that IMSIs provide a transferable, simple approach to estimate mobile source air pollution in cities with differing topography and source profiles using readily available data.
Separator development for a heat sterilizable battery Quarterly report, 1 Jun. - 30 Sep. 1966
Filler and matrix composite materials for use in silver-zinc battery separators
A proposed method for estimating residual matrix chemistry in nickel-base superalloys
Estimation of residual matrix composition of nickel-base superalloys by phase diagram analysis
Wishart variate generators
Subroutine WSHRT for generating matrix of variances and covariances of Wishart distribution
On the reduction of a sparse matrix to Hessenberg form
Growth minimization of nonzero elements in sparse matrix during reduction to Hessenberg triangular form by Gaussian similarity transformations
Relation between surface slip topography and stress corrosion cracking in Ti-8 wt % Al
The deformation behavior of Ti-8 wt % Al has been investigated in an inert environment (air), and an aggressive environment (salt water). Details of surface slip geometry were examined by high resolution surface replicas at various stages of deformation in both environments. Specimens aged to contain a fine dispersion of Ti3Al precipitates failed by subcritical crack growth in salt water, whereas specimens in the single phase condition showed no effects of environment on the yield or fracture characteristics. The Ti3Al precipitates produce little change in strength level or slip character compared to the single phase alloy, and there is no evidence of any effects of environment on the character of surface slip. Rather, the presence of trenches along slip bands on the surface of aged specimens suggest that the specific effect of the Ti3Al precipitates is to render the surface slip steps chemically active relative to the surrounding matrix by slip induced dissolution of the particles.
Derivatives of a statically reduced stiffness matrix with respect to sizing variables
An expression is obtained for the first derivatives with respect to the sizing variables of a statically reduced stiffness matrix that is a nonlinear function of the sizing variables, where the unreduced stiffness matrix is a linear function of the sizing variables. An accepted procedure to reduce the number of degrees of freedom is to eliminate a number of nodal displacements from the degrees of freedom such that the accuracy of the flutter analysis is not significantly affected. In a typical optimization procedure with flutter constraints, the derivative of the stiffness matrix may be used in a form that contains the characteristic vector of the flutter matrix equation and the transpose of the characteristic vector of the adjoint flutter matrix equation corresponding to a particular solution of the flutter equation.
Single-, two-, and three-phase binary-alloy systems
Series of three computer programs solves one-dimensional transient diffusion problems in single-and multiphase binary-alloy systems. Accurate understanding of diffusion process in binary-alloy system is important for development of metal matrix composites, some protective coatings, and thin-film technology.
Description of the HiMAT Tailored composite structure and laboratory measured vehicle shape under load
The aeroelastically tailored outer wing and canard of the highly maneuverable aircraft technology (HiMAT) vehicle are closely examined and a general description of the overall structure of the vehicle is provided. Test data in the form of laboratory measured twist under load and predicted twist from the HiMAT NASTRAN structural design program are compared. The results of this comparison indicate that the measured twist is generally less than the NASTRAN predicted twist. These discrepancies in twist predictions are attributed, at least in part, to the inability of current analytical composite materials programs to provide sufficiently accurate properties of matrix dominated laminates for input into structural programs such as NASTRAN.
High temperature composites. Status and future directions
A summary of research investigations of manufacturing methods, fabrication methods, and testing of high temperature composites for use in gas turbine engines is presented. Ceramic/ceramic, ceramic/metal, and metal/metal composites are considered. Directional solidification of superalloys and eutectic alloys, fiber reinforced metal and ceramic composites, ceramic fibers and whiskers, refractory coatings, metal fiber/metal composites, matrix metal selection, and the preparation of test specimens are discussed.
Structures and textures of the Murchison and Mighei carbonaceous chondrite matrices
High-resolution transmission electron microscopy has confirmed earlier observations that the character of the Murchison and Mighei fine-grained matrices is complex in mineralogy and texture. Layer structure minerals occur as planar laths, rounded grains or subhedral grains, and range in size from less than 100 A to about 1 micrometer. Serpentine-type and brucite-type structures predominate in the CM matrices. The occurrence of Povlen chrysolite and a vein of disordered mixed-layer and brucite-type material cutting a large lizardite-type grain suggests that at least some of the matrix materials were formed by alteration of preexisting material.
Population Control of Self-Replicating Systems: Option C
From the conception and development of the theory of self-replicating automata by John von Neumann, others have expanded on his theories. In 1980, Georg von Tiesenhausen and Wesley A. Darbro developed a report which is a "first' in presenting the theories in a conceptualized engineering setting. In that report several options involving self-replicating systems are presented. One of the options allows each primary to generate n replicas, one in each sequential time frame after its own generation. Each replica is limited to a maximum of m ancestors. This study involves determining the state vector of the replicas in an efficient manner. The problem is cast in matrix notation, where F = fij is a non-diagonalizable matrix. Any element fij represents the number of elements of type j = (c,d) in time frame k+1 generated from type i = (a,b) in time frame k. It is then shown that the state vector is: bar F(k)=bar F (non-zero) X F sub K = bar F (non-zero) xmx J sub kx m sub-1 where J is a matrix in Jordan form having the same eigenvalues as F. M is a matrix composed of the eigenvectors and the generalized eigenvectors of F.