Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Precipitation Science”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,297 records · Page 72

Development and verification of long-range atmospheric transport model of radon-222 and lead-210 including scavenging process

A three-dimensional Eulerian atmospheric long-range transport model of radon-222 ({sup 222}Rn) and lead-210 ({sup 210}Pb) coupled with meteorological model MM5 was developed. The model calculates advection, diffusion, radiation decay and deposition processes in a horizontal scale of several thousand kilometers. This model was applied to East Asia. Performance of the model was evaluated with measured hourly surface air {sup 222}Rn concentration and monthly {sup 210}Pb deposition. The model verification was done with respect to the following points: 1) the sensitivity of vertical distribution of turbulent diffusivity and 2) the accuracy of spatial distribution of precipitation. In this report, improvement of the model performance is also discussed.

54 ENVIRONMENTAL SCIENCES↗

Planning green infrastructure placement based on projected precipitation data

Continued urbanization has led to tremendous changes on the landscape. These changes have exacerbated the effects of extreme climatic events such as flooding because of constrained water infiltration and increased surface flow. Typical runoff control measures involve sophisticated gray infrastructure that guide excess surface flow into storage and disposal sites. In a dynamic climate system, these measures are not sustainable since they cannot be easily modified to accommodate large volumes of runoff. Green Infrastructure (GI) is an adaptable technique that can be used to minimize runoff, in addition to offering an array of additional benefits (urban heat regulation, aesthetics, improved air quality etc.). Strategic placement of GI is key to achieving maximum utility. While physical site characteristics play a major role in determining suitable GI placement sites, knowledge of future precipitation patterns is crucial to ensure successful flood mitigation. Here, suitable GI sites within the city of Knoxville, Tennessee, were determined based on potential impact of an extreme flood event as indicated by site characteristics. Then, the relative potential likelihood of a flood event was determined based on projected precipitation data and knowledge of existing flood zones. By combining potential impact with likelihood information, low, medium, and high priority GI implementation sites were established. Results indicate that high priority sites are in the central parts of the city with priority decreasing outward. The GI prioritization scheme presented here, offers valuable guidance to city planners and policy makers who wish to exploit the GI approach for flood mitigation.

54 ENVIRONMENTAL SCIENCES↗

The Inhibition of Pb(IV) Oxide Formation in Chlorinated Water by Orthophosphate

Historically, understanding lead solubility and its control in drinking water has been based on Pb(II) chemistry. Unfortunately, there is very little information available regarding the nature of Pb(IV) oxides in finished drinking water and water distribution systems, and the conditions under which they persist. The objective of this research was to explore the impact of orthophosphate on the realistic pathways that lead to the formation of Pb(IV) oxides in chlorinated water. The results of XRD and XANES analysis showed that, in the absence of orthophosphate (DIC = 10 mg C/L, 24 C, pH 7.75-8.1, 3 mg Cl{sub 2}/L goal), Pb(IV) oxides formed with time following a transformation from the Pb(II) mineral hydrocerussite. Under the same experimental conditions, orthophosphate dosing inhibited the formation of Pb(IV) oxides. The Pb(II) mineral hydroxypyromorphite, Pb{sub 5}(PO{sub 4}){sub 3}OH, was the only mineral phase identified during the entire study of over 600 days, although the presence of some chloropyromorphite, Pb{sub 5}(PO{sub 4}){sub 3}Cl, could not be ruled out. The conclusions were further supported by SEM, TEM, and XANES analysis of lead colloids, and lead precipitation experiments conducted in the absence of free chlorine. The findings provide an important explanation for the absence of Pb(IV) oxides in some water systems that have used, or currently use, orthophosphate for corrosion control when otherwise, based on disinfection practices and water quality, its presence would be anticipated, as well as why the conversion from free chlorine to chloramines was not observed to increase lead release.

54 ENVIRONMENTAL SCIENCES↗

Global Precipitation Measurement (GPM) Mission: Overview and Status

The Global Precipitation Measurement (GPM) Mission is an international satellite mission specifically designed to unify and advance precipitation measurements from a constellation of research and operational microwave sensors. NASA and JAXA will deploy a Core Observatory in 2014 to serve as a reference satellite to unify precipitation measurements from the constellation of sensors. The GPM Core Observatory will carry a Ku/Ka-band Dual-frequency Precipitation Radar (DPR) and a conical-scanning multi-channel (10-183 GHz) GPM Microwave Radiometer (GMI). The DPR will be the first dual-frequency radar in space to provide not only measurements of 3-D precipitation structures but also quantitative information on microphysical properties of precipitating particles. The DPR and GMI measurements will together provide a database that relates vertical hydrometeor profiles to multi-frequency microwave radiances over a variety of environmental conditions across the globe. This combined database will be used as a common transfer standard for improving the accuracy and consistency of precipitation retrievals from all constellation radiometers. For global coverage, GPM relies on existing satellite programs and new mission opportunities from a consortium of partners through bilateral agreements with either NASA or JAXA. Each constellation member may have its unique scientific or operational objectives but contributes microwave observations to GPM for the generation and dissemination of unified global precipitation data products. In addition to the DPR and GMI on the Core Observatory, the baseline GPM constellation consists of the following sensors: (1) Special Sensor Microwave Imager/Sounder (SSMIS) instruments on the U.S. Defense Meteorological Satellite Program (DMSP) satellites, (2) the Advanced Microwave Scanning Radiometer-2 (AMSR-2) on the GCOM-W1 satellite of JAXA, (3) the Multi-Frequency Microwave Scanning Radiometer (MADRAS) and the multi-channel microwave humidity sounder (SAPHIR) on the French-Indian MeghaTropiques satellite, (4) the Microwave Humidity Sounder (MHS) on the National Oceanic and Atmospheric Administration (NOAA)-19, (5) MHS instruments on MetOp satellites launched by the European Organization for the Exploitation of Meteorological Satellites (EUMETSAT), (6) the Advanced Technology Microwave Sounder (ATMS) on the National Polar-orbiting Operational Environmental Satellite System (NPOESS) Preparatory Project (NPP), and (7) ATMS instruments on the NOAA-NASA Joint Polar Satellite System (JPSS) satellites. Data from Chinese and Russian microwave radiometers may also become available through international collaboration under the auspices of the Committee on Earth Observation Satellites (CEOS) and Group on Earth Observations (GEO). The current generation of global rainfall products combines observations from a network of uncoordinated satellite missions using a variety of merging techniques. GPM will provide "next-generation" precipitation products characterized by: (1) more accurate instantaneous precipitation estimate (especially for light rain and cold-season solid precipitation), (2) intercalibrated microwave brightness temperatures from constellation radiometers within a consistent framework, and (3) unified precipitation retrievals from constellation radiometers using a common a priori hydrometeor database constrained by combined radar/radiometer measurements provided by the GPM Core Observatory. GPM is a science mission with integrated applications goals. GPM will provide a key measurement to improve understanding of global water cycle variability and freshwater availability in a changing climate. The DPR and GMI measurements will offer insights into 3-dimensional structures of hurricanes and midlatitude storms, microphysical properties of precipitating particles, and latent heat associated with precipitation processes. The GPM mission will also make data available in near realtime (within 3 hours of observations) forocietal applications ranging from position fixes of storm centers, numerical weather prediction, flood forecasting, freshwater management, landslide warning, crop prediction, to tracking of water-borne diseases. An overview of the GPM mission design, retrieval strategy, ground validation activities, and international science collaboration will be presented.

Hou, Arthur Y.↗

Aitken Mode Aerosols Buffer Decoupled Mid‐Latitude Boundary Layer Clouds Against Precipitation Depletion

Aerosol-cloud-precipitation interactions are a leading source of uncertainty in estimating climate sensitivity. Remote marine boundary layers where accumulation mode (~100–400 nm diameter) aerosol concentrations are relatively low are very susceptible to aerosol changes. These regions also experience heightened Aitken mode aerosol (~10–100 nm) concentrations associated with ocean biology. Aitken aerosols may significantly influence cloud properties and evolution by replenishing cloud condensation nuclei and droplet number lost through precipitation (i.e., Aitken buffering). We use a large-eddy simulation with an Aitken-mode enabled microphysics scheme to examine the role of Aitken buffering in a mid-latitude decoupled boundary layer cloud regime observed on 15 July 2017 during the Aerosol and Cloud Experiments in the Eastern North Atlantic flight campaign: cumulus rising into stratocumulus under elevated Aitken concentrations (~100–200 mg -1 ). In situ measurements are used to constrain and evaluate this case study. Our simulation accurately captures observed aerosol-cloud-precipitation interactions and reveals time-evolving processes driving regime development and evolution. Aitken activation into the accumulation mode in the cumulus layer provides a reservoir for turbulence and convection to carry accumulation aerosols into the drizzling stratocumulus layer above. Further Aitken activation occurs aloft in the stratocumulus layer. Together, these activation events buffer this cloud regime against precipitation removal, reducing cloud break-up and associated increases in heterogeneity. We examine cloud evolution sensitivity to initial aerosol conditions. With halved accumulation number, Aitken aerosols restore accumulation concentrations, maintain droplet number similar to original values, and prevent cloud break-up. Without Aitken aerosols, precipitation-driven cloud break-up occurs rapidly. In this regime, Aitken buffering sustains brighter, more homogeneous clouds for longer.

54 ENVIRONMENTAL SCIENCES↗

Microstructure Analysis and Rheological Behavior of Magnesium Alloys at Semi-solid Temperature Range

Microstructure and rheological properties of AZ91 and Elektron 21 magnesium alloys in semi-solid state were studied. Differential scanning calorimetry revealed significant differences in melting range in analyzed materials. Isothermal annealing for 5, 30 and 80 min, in semi-solid range, corresponding to 50 and 70% of solid fraction, showed slower microstructure coarsening kinetics in Elektron 21 due to the presence of Zr- and RE-enriched precipitations. Ostwald ripening and coalescence resulted in decrease in grains density with increasing annealing time and temperature. Hardness after annealing showed overall tendency to diminish with soaking time probably due to the growth of average grain size. Rheological analysis showed tendency to lower the value of dynamic viscosity coefficient as shear rate rise, which confirmed non-Newtonian flow behavior. The highest values of dynamic viscosity coefficient were obtained for alloy AZ91.

36 MATERIALS SCIENCE↗

The inhibiting effect of dislocation helices on the stress-induced orientation of S' precipitates in Al–Cu–Mg alloy

The phenomenon of restrained stress-induced preferential orientation of S′ precipitates is investigated using a single-crystal of Al–1.23Cu–0.43 Mg alloy. Al–1.23Cu–0.43 Mg single-crystal specimens are subjected to stress aging, and the microstructure is analyzed by transmission electron microscopy (TEM). It is found that the stress-induced preferential orientation of S′ precipitates is restrained owing to the dislocations produced by a higher stress. The effect of dislocations on the oriented precipitates depends on the total length of the intersection lines for precipitate habit planes and dislocation glide planes. This investigation not only provides important insight into solving the anisotropy problem attributed to precipitation strengthening, but also offers a benchmark for choosing the appropriate stress range in manufacturing of Al–Cu–Mg alloys. - Highlights: • Single crystals of an Al–Cu–Mg alloy were prepared for the investigations. • A phenomenon of restrained stress-induced preferential orientation of S′ precipitates was found. • The influence of dislocation helices on precipitation during stress-aging was studied. • Difference of orientation degree of S′ precipitates and θ′ precipitates was explained. • A basis for choosing the appropriate stress range in manufacturing of Al–Cu–Mg alloys is provided.

36 MATERIALS SCIENCE↗

Microstructural evolution and thermal stability after aging of a cobalt-containing martensitic bearing steel

The microstructural changes and thermal stability of a cobalt-containing martensitic heat resistance bearing steel have been investigated in this paper. The hardness variation showed a progressive hardness decrease associated with coarsening of fine carbides at elevated temperatures. The precipitation of secondary phases during tempering at 500 °C for 10 h and 100 h has been characterized and identified in detail using transmission electron microscopy. The results revealed that the aging treatment induced very fine secondary M{sub 6}C precipitates which were responsible for the secondary hardening peak when tempered at 500 °C for 30 h. But the hardness gradually decreased due to the coarsening of M{sub 6}C carbide and other secondary phases (such as μ phase, σ phase, and χ phase) precipitation when the samples were tempered over 30 h at 500 °C. - Highlights: •Retained austenite fraction was reduced after cryogenic treatment. •Secondary hardening was responsible for M{sub 6}C precipitates. •TEM study to investigate different phases characteristics •Coarsening of carbides during aging has a significant effect on mechanical properties.

36 MATERIALS SCIENCE↗

Synthesis and Characterization of In-situ Copper-Niobium Carbide Composite

In this work, synthesis of copper matrix composite powder reinforced by in situ niobium carbide particle was prepared by mechanical alloying of elemental powder and subsequent heat treatment. Elemental powders of Cu-Nb-C correspond to Cu-40wt%Nb-10%wtC composition was milled for 54 hours at room temperature in a planetary ball mill. The effect of heat treatment temperature on the formation of niobium carbide was analyzed. Characterization by X-ray diffraction was done on the milled powder and heat-treated powder in order to investigate NbC formation. Results indicate that NbC began to precipitate after mechanical alloying for about 54h with heat treatment temperature of 900 deg. C and 1000 deg. C.

36 MATERIALS SCIENCE↗

Farmers’ Perception of Climate Change and Its Impacts on Agriculture

Climate change and climate variability drive rapid glacier melt and snowpack loss, extreme precipitation and temperature events, and alteration of water availability in the Himalayas. There is increasing observational evidence of climate change impacts on water resource availability and agricultural productivity in the central Himalayan region. Here, we assess the farmers’ perception of climate change and its impacts on agriculture in western Nepal. We interviewed 554 households and conducted eight focus group discussions to collect farmers’ perceptions of temperature and rainfall characteristics, water availability, onset and duration of different seasons, and the impacts of such changes on their lives and livelihoods. Our results indicate that the farmers’ perceptions of rising annual and summer temperatures are consistent with observations. Perception, however, contradicts observed trends in winter temperature, as well as annual, monsoon, and winter precipitation. In addition, farmers are increasingly facing incidences of extreme events, including rainfall, floods, landslides, and droughts. These hazards often impact agricultural production, reducing household income and exacerbating the economic impacts on subsistence farmers. Integrated assessment of farmers’ perceptions and hydrometeorological observations is crucial to improving climate change impact assessment and informing the design of mitigation and adaptation strategies.

54 ENVIRONMENTAL SCIENCES↗

Seasonal Variations in Mercury Deposition over the Yellow Sea, July 2007 through April 2008

Spatial and temporal variations of mercury, including dry and wet deposition fluxes, were assessed over Northeast Asia, targeting the Yellow Sea, using meteorology and chemistry models. Four modeling periods, each representative of one of the four seasons, were selected. Modeling results captured general patterns and behaviors, and fell within similar ranges with respect to observations. However, temporal variations of mercury were not closely matched, possibly owing to the effects of localized emissions. Modeling results indicated that dry deposition is correlated with wind speed, while wet deposition is correlated with precipitation amount. Overall, the wet deposition flux of 66 ng/m2-day was about twice as large as the dry deposition flux of 32 ng/m2-day, when averaged over the four modeling periods. Dry deposition occurred predominantly in the form of reactive gaseous mercury (RGM). In contrast, RGM accounted for only about two-thirds of wet deposition, while particulate mercury accounted for the remainder.

54 ENVIRONMENTAL SCIENCES↗

A Kinetic Model for Dissolution of Zinc Oxide Powder Obtained from Waste Alkaline Batteries in Sodium Hydroxide Solutions

The determination of individual dissolution behaviors of zinc and manganese in waste alkaline battery powders is an important subject from the points of the leaching yield, design of leaching reactor, and separation and recovery steps of hydrometallurgical process. In the current study, we investigated the dissolution kinetics of zinc oxide powder. Zinc oxide was obtained from waste alkaline batteries, and sodium hydroxide solutions were used as solvent. In the experiments, the effects of solution concentration, reaction temperature, stirring speed, solid-to-liquid ratio, and particle size on the dissolution of zinc oxide were investigated. It was demonstrated that the dissolution increased with the increasing concentration, reaction temperature, and stirring speed, and with the decreasing solid-to-liquid ratio and particle size. In consequence of the kinetic analysis performed, it was found that the dissolution kinetics of zinc powder obeyed the Avrami model. Activation energy for the process was determined to be 19.42 kJ/mol. Zinc ions in the resulting solution after dissolution process was recovered in the form of hydroxy-carbonate product by precipitation method. Zinc oxide was produced by isothermal decomposition of hydroxy-carbonate product.

36 MATERIALS SCIENCE↗

Understanding the role of carbon atoms on microstructure and phase transformation of high Nb containing TiAl alloys

The microstructure and solidification behavior of high Nb containing TiAl alloys with the composition of Ti-46Al-8Nb-xC (x = 0.1, 0.7, 1.4, 2.5 at.%) prepared by arc-melting method have been investigated in this work. The results give evidence that the addition of carbon changes the solidification behavior from solidification via the β phase to the peritectic solidification. And carbon in solid solution enriches in the α{sub 2} phase and increases the microhardness. As the carbon content increases to 1.4 at.%, plate-shape morphology carbides Ti{sub 2}AlC (H phase) precipitate from the TiAl matrix which leads to the refinement microstructure. By aging at 1173 K for 24 h after quenching treatment, fine needle-like and granular shape Ti{sub 3}AlC (P phase) carbides are observed in the matrix of Ti-46Al-8Nb-2.5C alloy, which distribute along the lamellar structure or around the plate-shape Ti{sub 2}AlC. Transmission electron microscope observation shows that the Ti{sub 3}AlC carbides precipitate at dislocations. The phase transformation in-situ observations indicate that the Ti{sub 2}AlC carbides partly precipitate during the solid state phase transformation process. - Highlights: •Carbon changes the solidification behavior from β phase to peritectic solidification. •Dislocations in solution treated γ phase act as nucleation sites of Ti{sub 3}AlC precipitations. •Ti{sub 3}AlC precipitates as fine needle-like or granular shape in the solution treated matrix. •Ti{sub 2}AlC carbides precipitate during the solid state phase transformation process.

36 MATERIALS SCIENCE↗

Impacts of interactive dust and its direct radiative forcing on interannual variations of temperature and precipitation in winter over East Asia

In this work, we used 150-year pre-industrial simulations of the Community Earth System Model (CESM) to quantify the impacts of interactively-modeled dust emissions on the interannual variations of temperature and precipitation over East Asia during the East Asian Winter Monsoon (EAWM) season. The simulated December-January-February dust column burden and dust optical depth are lower over northern China in the strongest EAWM years than those of the weakest years, with regional mean values lower by 38.3% and 37.2%, respectively. The decrease in dust over the dust source regions (the Taklamakan and Gobi Deserts) and the downwind region (such as the North China Plain) leads to an increase in direct radiative forcing (RF) both at the surface and top of atmosphere by up to 1.5 and 0.75 W m-2, respectively. The effects of EAWM-related variations in surface winds, precipitation and their effects on dust emissions and wet removal contribute about 67% to the total dust-induced variations of direct RF at the surface and partly offset the cooling that occurs with the EAWM strengthening by heating the surface. The variations of surface air temperature induced by the changes in wind and dust emissions increase by 0.4-0.6 K over eastern coastal China, northeastern China, and Japan, which weakens the impact of EAWM on surface air temperature by 3–18% in these regions. The warming results from the combined effects of changes in direct RF and easterly wind anomalies that bring warm air from the ocean to these regions. Moreover, the feedback of the changes in wind on dust emissions weakens the variations of the sea level pressure gradient on the Siberian High while enhancing the Maritime Continent Low. Therefore, cold air is prevented from being transported from Siberia, Kazakhstan, western and central China to the western Pacific Ocean and decreases surface air temperature by 0.6 K and 2 K over central China and the Tibetan Plateau, respectively. Over eastern coastal China, the variations of large-scale precipitation induced by the feedback of EAWM-related changes in wind on dust emissions increase by 10-30% in winter because of the increase in surface air temperature and the anomalous circulation.

54 ENVIRONMENTAL SCIENCES↗

Effect of the Heat Treatment on the Corrosion Resistance of Duplex Stainless Steels

Duplex stainless steels (DSS) are biphasic austenitic-ferritic steels in which the best combination of mechanical and corrosion resistance properties is achieved for an almost equal volume fraction of the phases. In this work, the effect of secondary phases precipitation on the corrosion resistance of four DSS grades (2101, 2304, 2205 and 2507), after isothermal aging in the critical temperature range 750-900 °C, was studied. The corrosion resistance was investigated by potentiodynamic polarization tests in both 0.6 M NaCl solution (pH 7) and in an acid chlorinated solution (pH 3) at room temperature. Moreover, the critical pitting temperature was determined according to ASTM G150. The results showed that secondary phases precipitation mainly influenced the resistance to corrosion of the lean duplex grades.

36 MATERIALS SCIENCE↗

The Effects of Cold Work on the Microstructure and Mechanical Properties of Intermetallic Strengthened Alumina-Forming Austenitic Stainless Steels

In order to achieve energy conversion efficiencies of > 50 pct for steam turbines/boilers in power generation systems, materials are required that are both strong and corrosion-resistant at > 973 K (700 A degrees C), and economically viable. Austenitic steels strengthened with Laves phase, NiAl and Ni3Al precipitates, and alloyed with aluminum to improve oxidation resistance, are potential candidate materials for these applications. The microstructure and microchemistry of recently developed alumina-forming austenitic stainless steels have been characterized by scanning electron microscopy, transmission electron microscopy, and synchrotron X-ray diffraction. Different thermo-mechanical treatments were performed on these steels to improve their mechanical performance. These reduced the grain size significantly to the nanoscale (similar to 100 nm) and the room temperature yield strength to above 1000 MPa. A solutionizing anneal at 1473 K (1200 A degrees C) was found to be effective for uniformly redistributing the Laves phase precipitates that form upon casting. (C) The Minerals, Metals & Materials Society and ASM International 2015

Hu, B.↗