Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Polymer behavior”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,297 records · Page 72
All sourcesNASA NTRSDOE OSTI
DOE OSTI2020

High-pressure behavior of a linear chain alkane, tricosane

Exploring the behavior of hydrocarbon under pressure is important for understanding its role in planetary sciences and also for exploring novel organic chemistry. In this study, we explored the high-pressure behavior of a linear-chain hydrocarbon, tricosane (C 23 H 48 ), using Raman spectroscopy. We compressed tricosane up to 23 GPa and did not find any evidence for pressure-induced amorphization within the conditions explored in this study. Upon compression, we observe new modes in the low energy region 100–300 cm -1 . In order to understand the appearance of these new modes at high pressures, we used complementary ab initio calculations and explored the effect of chain configurations (linear and bent) on the predicted Raman spectra. We find that these new modes observed at higher pressures are better explained by bent configuration of tricosane chains. Thus, based on high-pressure Raman spectra, it is very likely that a linear chain of tricosane is bent under pressure, i.e., it undergoes a pressure-induced trans-gauche transformation. Furthermore, it is likely that such bent regions (i.e., kinks) will act as sites along which large chain hydrocarbons could dissociate into smaller chain lengths at extreme conditions relevant to the interiors of Jovian planets.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Hybrid epoxy–acrylate resins for wavelength-selective multimaterial 3D printing

Structures in nature have evolved to combine hard and soft materials in precise 3D arrangements, which imbues bulk properties and functionality that remain elusive to mimic synthetically. However, the potential for biomimetic analogs to seamlessly interface hard materials with soft surfaces for applications ranging from robotics and sealants to medical devices (e.g., prosthetics and wearable health monitors) has driven the demand for innovative chemistries and manufacturing approaches. Herein, we unveil a liquid resin for rapid, high resolution digital light processing (DLP) 3D printing of multimaterial objects with an unprecedented combination of strength, elasticity, and resistance to aging. Two enabling discoveries are the use of a covalently bound (hybrid) epoxy-acrylate monomer that precludes plasticization of soft domains and a wavelength-selective photosensitizer that accelerates cationic curing for hard domains. Using dual projection for multicolor DLP 3D printing (UV and violet light), several bioinspired metamaterial structures are fabricated, including one with hard springs embedded in a soft cylinder to adjust compressive behavior and a detailed knee joint featuring “bones” and “ligaments” for smooth motion. Lastly, the application of this system to facilitate selective stretching for electronic devices is demonstrated with a proof-of-concept device.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Induced phase transformation in ionizable colloidal nanoparticles

Abstract Acid–base equilibria directly influence the functionality and behavior of particles in a system. Due to the ionizing effects of acid–base functional groups, particles will undergo charge exchange. The degree of ionization and their intermolecular and electrostatic interactions are controlled by varying the pH and salt concentration of the solution in a system. Although the pH can be tuned in experiments, it is hard to model this effect using simulations or theoretical approaches. This is due to the difficulty in treating charge regulation and capturing the cooperative effects in a colloidal suspension with Coulombic interaction. In this work, we analyze a suspension of ionizable colloidal particles via molecular dynamics (MD) simulations, along with Monte Carlo simulations for charge regulation (MC-CR) and derive a phase diagram of the system as a function of pH. It is observed that as pH increases, particles functionalized with acid groups change their arrangement from face-centered cubic (FCC) packing to a disordered state. We attribute these transitions to an increase in the degree of charge polydispersity arising from an increase in pH. Our work shows that charge regulation leads to amorphous solids in colloids when the mean nanoparticle charge is sufficiently high. Graphical abstract

36 MATERIALS SCIENCE↗
DOE OSTI2022

Diels–Alder Augmented Epoxies with Plasmonic Nanoparticle Fillers for Efficient Photothermal Depolymerization

Thermally reversible epoxies through the Diels–Alder (DA) reaction have been used for applications such as recycling, self-healing, and 3D printing. Depolymerization by bulk heating, however, would be a slow and inefficient process due to its low thermal conductivity. In this paper, photothermal conversion using refractory plasmonic titanium nitride (TiN) nanoparticles was employed for efficient and rapid depolymerization of reversible epoxies. TiN nanoparticles have superior thermal stability, broader light absorption, and higher light-to-heat conversion efficiency. They are also less expensive than more common plasmonic gold nanoparticles. Photothermal behavior of TiN nanoparticle-filled reversible epoxies was investigated as a function of concentration of TiN nanoparticles and as a function of the intensity of a light source. TiN nanoparticles could induce sufficient heat for depolymerization with a trace content, 0.01% by weight, under a broad-spectrum white light of intensity 1760 mW/cm 2 instead of a strong light source such as a laser. The reversible epoxies were prepared by a reaction between furan precursors and a bismaleimide compound. Crosslinking density was controlled by altering the architecture of furan precursors and the feed ratio between the furan precursor and the bismaleimide compound. These changes in chemical structure and degree of crosslinking permit the control of the thermomechanical properties of the reversible epoxy from soft elastomers to hard elastomers. Here, the reversible epoxies display a flow region at around 110 °C. Depolymerization through the retro-DA was confirmed by Fourier transform infrared spectroscopy as a function of duration at a high temperature. Light-induced removability and recyclability were demonstrated by adhesion tests using the reversible epoxy/nanoparticle composites.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Equilibrium-gated pattern formation: How molecular dissociation thermodynamics drive emergent behavior in dissipative polymeric systems

Emergent patterns in biological systems arise through dissipative processes that balance reaction and transport phenomena, producing highly functional properties from self-regulating mechanisms. Synthetic fabrication, by contrast, often relies on user-controlled, multistep methods that lack the self-organizing capabilities of natural systems. Inspired by nature, we sought chemical systems that integrate strongly coupled reaction and transport phenomena, identifying frontal ring-opening metathesis polymerization (FROMP) as a method capable of creating diverse forms and functions through reactive processing. By employing discrete molecular initiators, FROMP allows precise control of key reaction steps—inhibition, initiation, and propagation. Using an integrated computational and experimental framework, we uncover how near-equilibrium inhibition dynamics, coupled with far-from-equilibrium reaction kinetics, drive pattern formation in frontally polymerized synthetic materials. We propose the concept of equilibrium-gated pattern formation, demonstrating how initiator chemistry can be tuned to achieve programmable macroscale properties. Our study reveals a surprising insight: Emergent behavior in FROMP systems arises from the inhibition-dominated regime of resin composition, expanding prior observations that such behavior is confined to a narrow compositional space near the boundary between front quenching and uniform front propagation. We identify a broader compositional window, far from the quenching regime, where emergent behavior reliably manifests. This expanded design space significantly enhances the operational flexibility of reactive systems and their capacity for self-organization. Furthermore, these insights provide a roadmap for designing bioinspired materials with self-organizing capabilities, unlocking possibilities in synthetic manufacturing.

Architected Polymers↗
DOE OSTI2020

Accelerated Aging and Evaluation of Hose-In-Hose Transfer Lines in the Hanford Waste Transfer System - 20312

Nonmetallic materials are used in the United States Department of Energy's Hanford Site Tank Farm waste transfer system. These materials include the inner primary hoses in the hose-in-hose transfer lines (HIHTLs), Garlock{sup R} gaskets, ethylene propylene diene monomer (EPDM) O-rings, and other nonmetallic materials. These nonmetallic materials are exposed to β and γ radiation, caustic solutions as well as high temperature and pressure stressors. How the nonmetallic components react to each of these stressors individually has been well established. However, simultaneous exposure of these stressors has not been evaluated and is of great concern to Hanford Site engineers. Florida International University's Applied Research Center engineers worked closely with key Hanford's Washington River Protection Solutions personnel to develop an experimental test plan that determines how these nonmetallic components react to various simultaneous stressor exposures. In this paper, research on the experimental testing of the hose-in-hose transfer lines used in the Hanford tank farm waste transfer system under simultaneous stressor exposures is presented. The stressor exposure experiments consisted of various combinations of simultaneous stressor exposure of caustic solution, high temperature and high pressure stressors. Research efforts focused on evaluating the aging behavior of EPDM by exposing samples of HIHTLs as well as EPDM dog bone shaped specimens to a 25% NaOH solution at (38 deg. C), operating (54 deg. C) and design temperatures (77 deg. C) for 6 months and 12 months. In addition, HIHTL and the EPDM dog-bone specimens were exposed to only hot water at 77 deg. C for a duration of one year. The mechanical and material properties of the samples were characterized and compared with those of the unexposed samples (baseline). Evaluations included burst pressure tests of the EPDM hose-in-hose transfer lines and material tensile strength test of EPDM dog-bone coupons. Both the tensile strength of the EPDM material dog bones and the burst pressure of the HIHTLs significantly decreased with the increasing temperature and increasing exposure time. When compared with the baseline samples, the burst pressure decreased by 28.75% for the sample aged at 77 deg. C after 12 months, in comparison to sample aged at 38 deg. C and 54 deg. C which had about 1.34% and 5.70% loss in burst pressures, respectively, after 12-month exposure. (authors)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗
DOE OSTI2022

Electron Tomography and Machine Learning for Understanding the Highly Ordered Structure of Leafhopper Brochosomes

Insects known as leafhoppers (Hemiptera: Cicadellidae) produce hierarchically structured nanoparticles known as brochosomes that are exuded and applied to the insect cuticle, thereby providing camouflage and anti-wetting properties to aid insect survival. Although the physical properties of brochosomes are thought to depend on the leafhopper species, the structure–function relationships governing brochosome behavior are not fully understood. Brochosomes have complex hierarchical structures and morphological heterogeneity across species, due to which a multimodal characterization approach is required to effectively elucidate their nanoscale structure and properties. In this work, we study the structural and mechanical properties of brochosomes using a combination of atomic force microscopy (AFM), electron microscopy (EM), electron tomography, and machine learning (ML)-based quantification of large and complex scanning electron microscopy (SEM) image data sets. This suite of techniques allows for the characterization of internal and external brochosome structures, and ML-based image analysis methods of large data sets reveal correlations in the structure across several leafhopper species. Our results show that brochosomes are relatively rigid hollow spheres with characteristic dimensions and morphologies that depend on leafhopper species. Nanomechanical mapping AFM is used to determine a characteristic compression modulus for brochosomes on the order of 1–3 GPa, which is consistent with crystalline proteins. Altogether, this work provides an improved understanding of the structural and mechanical properties of leafhopper brochosomes using a new set of ML-based image classification tools that can be broadly applied to nanostructured biological materials.

Chemical structure↗
DOE OSTI2022

Covalently integrated silica nanoparticles in poly(ethylene glycol)-based acrylate resins: thermomechanical, swelling, and morphological behavior

Nanocomposites integrate functional nanofillers into viscoelastic matrices for electronics, lightweight structural materials, and tissue engineering. Herein, the effect of methacrylate-functionalized (MA-SiO 2 ) and vinyl-functionalized (V-SiO 2 ) silica nanoparticles on the thermal, mechanical, physical, and morphological characteristics of poly(ethylene glycol) (PEG) nanocomposites was investigated. The gel fraction of V-SiO 2 composites decreases upon addition of 3.8 wt% but increases with further addition (>7.4 wt%) until it reaches a plateau at 10.7 wt%. The MA-SiO 2 induced no significant changes in gel fraction and both V-SiO 2 and MA-SiO 2 nanoparticles had a negligible impact on the nanocomposite glass transition temperature and water absorption. The Young's modulus and ultimate compressive stress increased with increasing nanoparticle concentration for both nanoparticles. Due to the higher crosslink density, MA-SiO 2 composites reached a maximum mechanical stress at a concentration of 7.4 wt%, while V-SiO 2 composites reached a maximum at a concentration of 10.7 wt%. Scanning electron microscopy, transmission electron microscopy, and small-angle X-ray scattering revealed a bimodal size distribution for V-SiO 2 and a monomodal size distribution for MA-SiO 2 . Although aggregates were observed for both nanoparticle surface treatments, V-SiO 2 dispersion was poor while MA-SiO 2 were generally well-dispersed. Finally, these findings lay the framework for silica nanofillers in PEG-based nanocomposites for advanced manufacturing applications.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Preparation and Characterization of Various Kraft Lignins and Impact on Their Pyrolysis Behaviors

Lignin-derived chemicals and fuel products have received much attention in the context of bio-refinery. In this study we prepared and characterized various lignin samples from black liquor (BL), a major byproduct from the pulp and paper manufacturing processes, and studied the pyrolysis behaviors of these isolated lignin samples at 600 °C under a N2 atmosphere. Three lignin samples were isolated from the Kraft pulping BL of Loblolly pine linerboard grade process (KL, obtained by direct evaporation; L10, obtained by precipitation at pH 10; L3, obtained by precipitation at pH 3), while another three were from the Kraft pulping BL of Loblolly pine bleach grade process (KB, B10, B3). The inorganic elements present in lignin samples were analyzed using an inductively coupled plasma (ICP) analyzer. The KL and KB samples contained a larger amount of inorganic elements, especially Na and S, than did the other lignin samples. Owing to large quantities of inorganic elements, the ash contents in KL and KB were higher than in the precipitated lignin samples (L10, B10, L3, and B3). These inorganic elements have a significant effect on the subsequent pyrolysis process, as a result, more extensive depolymerization of lignin occurred in KL and KB samples, leading to the formation of fewer pyrolysis oils, with lower molecular weights. NMR analyses of pyrolysis oils show that more methoxyl groups and ether bonds were cleaved, resulting in fewer methoxyl groups and aromatic C–O bonds for the KL and KB heavy oil than for the precipitated lignin heavy oil.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Tuning Molecular Interactions between Peptoids and Substrates to Achieve Surface-Agnostic Coating

Achieving programmable and robust coatings that maintain functionality while adhering to various surface types with molecular-level tunability and programmable features remains challenging. In this study, we develop adaptable and stable surface-agnostic coatings (SACs) based on crystalline peptoid membranes by tuning interpeptoid and peptoid-substrate interactions. We utilize two complementary methods: (1) surfaceinduced assembly, where peptoid membranes form directly on substrates, and (2) depositing preformed peptoid crystalline membranes via an aqueous layer-by-layer (LbL) assembly technique. These strategies are applied to substrates with diverse surface chemistries and topographies, including mica, highly ordered pyrolytic graphite (HOPG), MoS 2 , sapphire, and porous membranes like porous alumina and polysulfide. Atomic force microscopy confirms the formation of peptoid coatings and reveals differences in assembly behavior across surfaces. Moisture vapor transport measurements serve as a proof-of-concept test for membrane continuity and tunable permeance. Together, these findings demonstrate the adaptability and programmability of peptoid-based SACs, enabling rational coating design on surfaces with diverse chemical and topographical features. Furthermore, this work opens pathways for using peptoid membranes as programmable surface modifiers in functional interfaces, protective coatings, and membrane platforms.

biomimetic polymers↗
DOE OSTI2020

Formation of helices with controllable chirality in gel-fiber composites

While microscale helices with specified chirality are pervasive in biological systems, driving purely synthetic materials to self-organize into such useful structures remains a significant challenge. Through theory and simulations, we model the behavior of initially flat ribbons of gel-fiber composites and show that these materials self-organize into three-dimensional helices with the application of heat. We specifically focus on thermo-responsive gels, which shrink when heated to a point near the lower critical solubility temperature (LCST). Within the composite, regions of the LCST gel that lie far from the fibers can readily shrink in response to the increased temperature; however, near the fibers the network is inhibited from undergoing the heat-induced collapse. This competition between the constrained and the unconstrained regions of the heated sample plays a vital role in the structural evolution of the material. Additionally, we find that this dynamic process can be controlled through the careful placement of the fibers on the outer surface of the gel. We specifically identify fiber arrangements that lead to the formation of helical structures with controlled chirality. Moreover, we isolate scenarios where constraining the movement of one or both the free ends of the sample promotes and stabilizes the formation of helical structures with specified handedness. Such structurally tailored composites are useful for creating mechanically robust actuators, and “appendages” for soft robots that can controllably curl and uncurl with variations in temperature.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Effect of surface defects on damage and failure of dynamically driven cylindrical shells

Here, in this work, expanding cylinder experiments are performed using a gas gun on the aluminum 6061 alloy to understand the dynamic deformation and failure behavior of this material in the presence of surface defects in the form of scratches. The experiments are then modeled with the modified Tepla (for tensile plasticity) model, which is equipped with the damage yield function of Gurson [“Continuum theory of ductile rupture by void nucleation and growth: Part I—Yield criteria and flow rules for porous ductile media,” (1977)] and Tvergaard and Needleman [Acta Metall. 32(1), 157–169 (1984)], over-stress viscosity [F. Addessio and J. Johnson, J. Appl. Phys. 74(3), 1640–1648 (1993)], and the underlying viscoplastic model of Preston et al. [J. Appl. Phys. 93(1), 211–220 (2003)] (Preston–Tonks–Wallace model) for the dense material. The Tepla model parameters were calibrated using the Bayesian approach against experimentally measured free-surface velocity data obtained from plate impact experiments on the aluminum 6061 alloy. The evolution of radial expansion and shapes of the deformed cylinder from the simulations on a pristine cylinder wall and a cylinder wall with a longitudinal surface defect shows excellent agreement with the corresponding experimental results. Finally, the role of surface defect size and cylinder wall geometry on the dynamic strength of the cylinder wall was also investigated through a series of simulations.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2022

Oxidative coupling of methane (OCM) conversion into C 2 products through a CO 2 /O 2 co-transport membrane reactor

Oxidative coupling of methane (OCM), which transforms CH 4 into C 2 products (C 2 H 6 and C 2 H 4 ) with molecular O 2 as the oxidant, is one of the most studied direct methane conversions (DMCs). However, a major technical hurdle to the OCM process is to achieve high CH 4 conversion at high C 2 (C 2 H 6 and C 2 H 4 ) selectivity. One rudimentary cause for this “tradeoff” behavior is the high chemical reactivity of the products (C 2 H 6 or C 2 H 4 ), which can be re-oxidized by O 2 . To overcome this thermodynamic challenge, minimizing the oxidizing power of the oxidant and lowering the local oxygen partial pressure are keys. Here, In this work, we demonstrate a new membrane reactor that capture CO 2 /O 2 from a flue gas and uses it for OCM conversion. The results show that the co-captured CO 2 /O 2 mixture converts CH 4 into C 2 H 6 in the presence of a 2%Mn–5%Na 2 WO 4 /SiO 2 catalyst, followed by thermal cracking of C 2 H 6 into C 2 H 4 and H 2 . The presence of CO 2 decreases the local partial pressure of O 2 , thus reducing the propensity of C 2 -products re-oxidation and leading to a higher C 2 selectivity. We show that a small button-type membrane reactor can achieve 12% C 2 yield with ~57% C 2 -selectivity using a diluted CH 4 -Ar mixture as the feedstock. We expect higher C 2 yield with tubular plug-flow membrane reactors in the future. We also highlight the unique advantage of the membrane reactor in intensifying CO 2 capture from both flue gas and OCM purification process into one single step.

42 ENGINEERING↗
DOE OSTI2023

Novel method to control explosive shock sensitivity: Formulations, experiments and modeling

The microstructure of a heterogeneous high explosive (HE) affects its shock initiation sensitivity and detonation performance. Alteration of the void content and/or void structure (i.e., bulk heating or mechanical damage) therefore changes the shock initiation behavior. Controlling and predicting the change in shock sensitivity after an HE has undergone microstructural changes addresses an important and challenging goal for the design and understanding of novel energetic material formulations. In this study, we aimed to develop HE systems to precisely tune shock sensitivity by a thermal treatment prior to use. Specifically, we incorporated a small fraction (1 wt% or less) of thermally expandable microspheres (TEMs) during the formulation process of various plastic-bonded explosives (PBX). TEMs typically consist of a thermoplastic acrylonitrile shell (10-50 µm diameter), which encapsulates an inert low boiling hydrocarbon. Upon heating, the TEMs expand as the shell softens while the hydrocarbon gasifies, increasing the internal pressure and expanding the particle by as much as 120 vol% (irreversibly). Here, we present our progress on shock sensitivity comparisons of HE formulations doped with TEMs after heating and expansion. Experiments, using Composition C-4 thermally cycled to 120°C, showed an increase in shock sensitivity. Additionally, mesoscale modeling revealed that the TEM itself does not act as a hotspot, but instead has a secondary effect on the response of nearby voids. We conclude that TEMs indeed do provide a method to tune shock sensitivity. Further, our results emphasize the non-uniformity of shock waves at the mesoscale, and that upstream defects influence the reactivity of downstream defects.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2023

Molecular dynamics study on the interfacial properties of mixtures of monomers of polyvinylpyrrolidone (PVP)-based battery binders on graphene and graphite surfaces

This study investigates the behavior of two different mixtures of monomers of polyvinylpyrrolidone (PVP)-based battery binders, polyvinylpyrrolidone:polyvinylidene difluoride (PVP:PVDF) and polyvinylpyrrolidone:polyacrylic acid (PVP:PAA), at graphene and graphite interfaces using classical molecular dynamics simulations. The aim is to identify the best performing monomer binder blend and carbon-based material for the design of battery-optimized energy devices. The PVP:PAA monomer binder blend and graphite are found to have the best interaction energies, densification upon adsorption, and more ordered structure. The adsorption of both monomer binder blends is strongly guided by the higher affinity of PVP and PAA monomeric molecules for the surfaces compared to PVDF. The structure of adsorbed layers of PVP:PVDF monomer binder blend on graphene and graphite develops more quickly than PVP:PAA, indicating faster kinetics. This study complements a previous density functional theory study recently reported by our group and contributes to a better understanding of the nanoscopic features of relevant interfacial regions involving mixtures of monomers of PVP-based battery binders and different carbon-based materials. In conclusion, the effect of a blend of commonly used monomer binders on carbon-based materials is essential for obtaining tightly bound anode and cathode active materials in lithium-ion batteries, which is crucial for designing battery-optimized energy devices.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Water, Protons, and the Gating of Voltage-Gated Potassium Channels

Ion channels are ubiquitous throughout all forms of life. Potassium channels are even found in viruses. Every cell must communicate with its surroundings, so all cells have them, and excitable cells, in particular, especially nerve cells, depend on the behavior of these channels. Every channel must be open at the appropriate time, and only then, so that each channel opens in response to the stimulus that tells that channel to open. One set of channels, including those in nerve cells, responds to voltage. There is a standard model for the gating of these channels that has a section of the protein moving in response to the voltage. However, there is evidence that protons are moving, rather than protein. Water is critical as part of the gating process, although it is hard to see how this works in the standard model. Here, we review the extensive evidence of the importance of the role of water and protons in gating these channels. Our principal example, but by no means the only example, will be the Kv1.2 channel. Evidence comes from the effects of D2O, from mutations in the voltage sensing domain, as well as in the linker between that domain and the gate, and at the gate itself. There is additional evidence from computations, especially quantum calculations. Structural evidence comes from X-ray studies. The hydration of ions is critical in the transfer of ions in constricted spaces, such as the gate region and the pore of a channel; we will see how the structure of the hydrated ion fits with the structure of the channel. In addition, there is macroscopic evidence from osmotic experiments and streaming current measurements. The combined evidence is discussed in the context of a model that emphasizes the role of protons and water in gating these channels.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2026

Nonlinear viscoelastic response of silicone additively manufactured direct ink write (DIW) foams under repetitive compression

To investigate dynamic fatigue behavior of foam in military protective applications, such as helmets, additively manufactured (AM) foams were compressively strained into the plateau region using a reduced design of experiments. A simple power law was found to govern the decline in dynamic stiffness (complex modulus) as the foams underwent the purchase order requirement of 10,000 cycles of small deformation in the plateau region. This rate of decline was newly found to correlate with the degree of nonlinearity in the material’s deformation, quantified using total harmonic distortion. Materials with low nonlinearity exhibited relatively stable stiffness across cycles, while those with high nonlinearity experienced greater losses. The observed nonlinearity depended on both applied stress and strain rate. A strong linear correlation (R 2 = 0.78) was identified between second-order nonlinearity and the time-dependent stiffness response. Two lattice structures were examined: face-centered tetragonal (FCT) and simple cubic (SC). The SC material exhibited higher total harmonic distortion (5%) and lower stiffness retention than the FCT (2%). In conclusion, these results suggest that for cyclic compression applications in a wide variety of industries such as packaging, personal protective equipment, or aerospace, selecting materials with lower stress and greater structural uniformity can enhance the stability of dynamic performance.

42 ENGINEERING↗
DOE OSTI2021

Effect of microphase separation on the limiting current density in hybrid organic-inorganic copolymer electrolytes

Hybrid organic-inorganic block copolymer electrolytes are of interest to enable batteries containing lithium metal anodes. The conductive block is a standard polymer electrolyte of poly(ethylene oxide) and the mechanically rigid block is an inorganic poly(acryloisobutyl polyhedral oligomeric silsesquioxane) polymer. Here, in this paper, we compare a poly(acryloisobutyl polyhedral oligomeric silsesquioxane)-b-poly(ethylene oxide)-b-poly(acryloisobutyl polyhedral oligomeric silsesquioxane) (POSS-PEO-POSS) triblock copolymer and a poly(ethylene oxide)-b- poly(acryloisobutyl polyhedral oligomeric silsesquioxane) (PEO-POSS) diblock copolymer mixed with lithium bis(trifluoromethanesulfonyl)imide salt. We have experimentally measured the limiting current density in lithium symmetric cells containing hybrid organic-inorganic electrolytes at 90 °C. The cells were polarized at a large range of applied current density. The diblock copolymer electrolyte exhibited a clear plateau in cell potential at all current densities below the limiting current density. At low applied current density, the triblock copolymer electrolyte also exhibited a clear plateau in cell potential. At currents approaching the limiting current density, the triblock copolymer electrolyte exhibited an underdamped potential profile. The cell potential did not reach a plateau at current densities above the limiting current in both systems. The diblock and triblock copolymer electrolytes were fully characterized using electrochemical methods to determine the ionic conductivity, cation current fraction, salt diffusion coefficient, and open circuit voltage as a function of salt concentration. Cell potential and salt concentration as functions of position in the cell at various current densities were calculated using Newman's concentrated solution theory. The theoretical limiting current density was calculated to be the current density at which salt is depleted at the cathode. We see quantitative agreement between experimental measurements and theoretical predictions for the limiting current density in the diblock copolymer electrolyte which has an ordered structure at all salt concentrations, while the experimental limiting current density is lower than the theoretical prediction for the triblock copolymer electrolyte, which exhibits a disordered morphology at high salt concentrations.

25 ENERGY STORAGE↗