Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Physics regularization”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,297 records · Page 72

Quantum rotor in nanostructured superconductors

Despite its apparent simplicity, the idealized model of a particle constrained to move on a circle has intriguing dynamic properties and immediate experimental relevance. While a rotor is rather easy to set up classically, the quantum regime is harder to realize and investigate. Here we demonstrate that the quantum dynamics of quasiparticles in certain classes of nanostructured superconductors can be mapped onto a quantum rotor. Furthermore, we provide a straightforward experimental procedure to convert this nanoscale superconducting rotor into a regular or inverted quantum pendulum with tunable gravitational field, inertia, and drive. We detail how these novel states can be detected via scanning tunneling spectroscopy. The proposed experiments will provide insights into quantum dynamics and quantum chaos.

36 MATERIALS SCIENCE↗

Solution of Two-Body Bound State Problems with Confining Potentials

The homogeneous Lippmann-Schwinger integral equation is solved in momentum space by using confining potentials. Since the confining potentials are unbounded at large distances, they lead to a singularity at small momentum. In order to remove the singularity of the kernel of the integral equation, a regularized form of the potentials is used. As an application of the method, the mass spectra of heavy quarkonia, mesons consisting from heavy quark and antiquark ({Upsilon}(bb-bar), {psi}(cc-bar)), are calculated for linear and quadratic confining potentials. The results are in good agreement with configuration space and experimental results.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Suppression of low-frequency charge noise in gates-defined GaAs quantum dots

To reduce the charge noise of a modulation-doped GaAs/AlGaAs quantum dot, we have fabricated shallow-etched GaAs/AlGaAs quantum dots using the wet-etching method to study the effects of two-dimensional electron gas (2DEG) underneath the metallic gates. The low-frequency 1/f noise in the Coulomb blockade region of the shallow-etched quantum dot is compared with a non-etched quantum dot on the same wafer. The average values of the gate noise are approximately 0.5 μeV in the shallow-etched quantum dot and 3 μeV in the regular quantum dot. Our results show the quantum dot low-frequency charge noise can be suppressed by the removal of the 2DEG underneath the metallic gates, which provides an architecture for noise reduction.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Strontium vapour laser with ionisation and recombination mechanisms of inversion formation

We have experimentally and numerically investigated a multiwavelength strontium vapour laser which simultaneously emits both in the IR spectrum range on the self-terminating transitions in strontium atoms and ions (λ=6.456 and ∼3μm for Sr I, and λ≈1μm for Sr II) and in the visible range on the recombination transition in strontium ions ( λ=0.4305 μm for Sr II). A number of regularities in the behaviour of the output characteristics of lasing, which allow for a targeted search for optimal excitation conditions of the multiwavelength strontium vapour lasers, are established. (lasers, their applications and other topics in quantum electronics)

42 ENGINEERING↗

Wave convection regimes in a binary mixture in a modulated gravitational field

Nonlinear wave convection regimes are studied in a horizontal layer of an incompressible binary mixture with anomalous thermal diffusion in the gravitational field modulated with an arbitrary amplitude and finite frequency. Oscillation regimes are numerically simulated by the finite difference method for the case of a layer with impenetrable rigid boundaries, which better corresponds to experimental laboratory conditions. A qualitative difference is found in the dynamics of nonlinear quasi-periodic and subharmonic oscillations appearing in the initially stratified mixture and behaving as modulated and regular standing waves. The dependences of the intensity of convective flows on the modulation amplitude are obtained. The results of nonlinear calculations are compared with data on the boundaries of the equilibrium stability found from the linear theory. It is shown that a region of parameters exists where alternating action suppresses the convective motion.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Fast Running Urban Dispersion Model for Radiological Dispersal Device (RDD) Releases: Model Description and Validation

Aeolus is an efficient three-dimensional computational fluid dynamics code based on finite volume method developed for predicting transport and dispersion of contaminants in a complex urban area. It solves the time dependent incompressible Navier-Stokes equation on a regular Cartesian staggered grid using a fractional step method. It also solves a scalar transport equation for temperature and using the Boussinesq approximation. The model also includes a Lagrangian dispersion model for predicting the transport and dispersion of atmospheric contaminants. The model can be run in an efficient Reynolds Average Navier-Stokes (RANS) mode with a run time of several minutes, or a more detailed Large Eddy Simulation (LES) mode with run time of hours for a typical simulation. This report describes the model components, including details on the physics models used in the code, as well as several model validation efforts. Aeolus wind and dispersion predictions are compared to field data from the Joint Urban Field Trials 2003 conducted in Oklahoma City (Allwine et al 2004) including both continuous and instantaneous releases. Newly implemented Aeolus capabilities include a decay chain model and an explosive Radiological Dispersal Device (RDD) source term; these capabilities are described. Aeolus predictions using the buoyant explosive RDD source are validated against two experimental data sets: the Green Field explosive cloud rise experiments conducted in Israel (Sharon et al 2012) and the Full-Scale RDD Field Trials conducted in Canada (Green et al 2016).

54 ENVIRONMENTAL SCIENCES↗

Wind Variability in Intermediate Luminosity B Supergiants

This study used the unique spectroscopic diagnostics of intermediate luminosity B supergiants to determine the ubiquity and nature of wind variability. Specifically, (1) A detailed analysis of HD 64760 demonstrated massive ejections into its wind, provided the first clear demonstration of a 'photospheric connection' and ionization shifts in a stellar wind; (2) The international 'IUE MEGA campaign' obtained unprecedented temporal coverage of wind variability in rapidly rotating stars and demonstrated regularly repeating wind features originating in the photosphere; (3) A detailed analysis of wind variability in the rapidly rotating B1 Ib, gamma Ara demonstrated a two component wind with distinctly different mean states at different epochs; (4) A follow-on campaign to the MEGA project to study slowly rotating stars was organized and deemed a key project by ESA/NASA, and will obtain 30 days of IUE observations in May-June 1996; and (5) A global survey of archival IUE time series identified recurring spectroscopic signatures, identified with different physical phenomena. Items 4 and 5 above are still in progress and will be completed this summer in collaboration with Raman Prinja at University College, London.

Massa, Derck↗

Multi-Star Wavefront Control at the Occulting Mask Coronagraph Testbed: Monochromatic Laboratory Demonstration for the Roman Coronagraph Instrument

The Astro2020 decadal survey recommended the Habitable Worlds Observatory (HWO), NASA’s direct imaging flagship mission, with a goal to achieve a statistically robust mission yield of 25 or more potentially habitable exoplanets. One way to achieve is to increase the instrument effectiveness by introducing additional bright, nearby targets. A majority of Sun-like stars have a stellar companion that can introduce additional noise into the field of view of any high-contrast imaging instrument and enabling exoplanet discovery around binary stars represents a path to increased corona graphic instrument efficiency by increasing the available science target pool of bright nearby stars. This includes both of the Alpha Centauri A and B stars which would represent the top science target for direct imaging if companion leakage could be suppressed. Multi-Star Wavefront Control(MSWC) is a technique that removes stellar leakage from both stellar components, enabling direct imaging of exoplanets in many binary star systems which can potentially increase corona graphic instrument effectivenessWe present the latest testbed results obtained with MSWC as part of the technology development effort focusing on demonstrations conducted on the Occulting Mask Coronagraph (OMC) testbed at JPL during thevacuum test window last winter, with an additional vacuum test planned for this fall. The MSWC mask consists of a shaped pupil mask similar to the one used for the Wide-Field of View mode, but also includes a set of superimposed, regularly-spaced dots that serve as a diffraction grating. OMC has a layout similar to the RomanSpace Telescope coronagraph instrument and configured with a binary imaging mode with a MSWC mask using same design as the contributed mask for the Roman coronagraph. Our testbed results represent the first demonstrations of this technique using the recently installed full binary source. We present results demonstrating suppression in the Super-Nyquist regime for the 3rd diffraction order reaching 8.7e-9 contrast with the Roman pupil. In addition, we present results obtained with a physical binary source and running MSWC in a binary star regime demonstrating 9.6e-8 contrast for a geometry matching potential Alpha Centauri observations in a515 nm monochromatic wavelength (similar but bluer than for Band 1) using the 5th diffraction order. Planned demonstrations in the upcoming vacuum window this fall will focus on Band 3d and Band 4 using the full MSWC mode for an Alpha Centauri geometry.

Roman Coronagraph Instrument↗

Wilson Dslash Kernel From Lattice QCD Optimization

Lattice Quantum Chromodynamics (LQCD) is a numerical technique used for calculations in Theoretical Nuclear and High Energy Physics. LQCD is traditionally one of the first applications ported to many new high performance computing architectures and indeed LQCD practitioners have been known to design and build custom LQCD computers. Lattice QCD kernels are frequently used as benchmarks (e.g. 168.wupwise in the SPEC suite) and are generally well understood, and as such are ideal to illustrate several optimization techniques. In this chapter we will detail our work in optimizing the Wilson-Dslash kernels for Intel Xeon Phi, however, as we will show the technique gives excellent performance on regular Xeon Architecture as well.

Lattice QCD, Wilson-Dslash, Parallel Computing, Op↗

Copper bromide vapour laser excited by an electron beam

Lasing on self-terminating copper atom transitions is obtained for the first time by pumping the Ne – CuBr mixture by regular pulses and by a pulse train of low-energy electron beams formed in an ‘open’ discharge. In these regimes in a range of experimental conditions, a growth of power and radiation energy is demonstrated with an increase in the electron beam current and pulse repetition rate. In a double pulse excitation regime, the lasing energy is completely recovered in ∼2.5 μs. In a central zone of the active element where CuBr molecules are totally dissociated, the specific lasing energy of ∼44 μJ cm{sup −3} is obtained at a physical efficiency of 8.5 %. (paper)

42 ENGINEERING↗

SU-E-J-42: Customized Deformable Image Registration Using Open-Source Software SlicerRT

Purpose: SlicerRT is a flexible platform that allows the user to incorporate the necessary images registration and processing tools to improve clinical workflow. This work validates the accuracy and the versatility of the deformable image registration algorithm of the free open-source software SlicerRT using a deformable physical pelvic phantom versus available commercial image fusion algorithms. Methods: Optical camera images of nonradiopaque markers implanted in an anatomical pelvic phantom were used to measure the ground-truth deformation and evaluate the theoretical deformations for several DIR algorithms. To perform the registration, full and empty bladder computed tomography (CT) images of the phantom were obtained and used as fixed and moving images, respectively. The DIR module, found in SlicerRT, used a B-spline deformable image registration with multiple optimization parameters that allowed customization of the registration including a regularization term that controlled the amount of local voxel displacement. The virtual deformation field at the center of the phantom was obtained and compared to the experimental ground-truth values. The parameters of SlicerRT were then varied to improve spatial accuracy. To quantify image similarity, the mean absolute difference (MAD) parameter using Hounsfield units was calculated. In addition, the Dice coefficient of the contoured rectum was evaluated to validate the strength of the algorithm to transfer anatomical contours. Results: Overall, SlicerRT achieved one of the lowest MAD values across the algorithm spectrum, but slightly smaller mean spatial errors in comparison to MIM software (MIM). On the other hand, SlicerRT created higher mean spatial errors than Velocity Medical Solutions (VEL), although obtaining an improvement on the DICE to 0.91. The large spatial errors were attributed to the poor contrast in the prostate bladder interface of the phantom. Conclusion: Based phantom validation, SlicerRT is capable of achieving comparable DIR accuracy to commercial programs such as MIM and VEL.

60 APPLIED LIFE SCIENCES↗

A nonrecursive order N preconditioned conjugate gradient: Range space formulation of MDOF dynamics

While excellent progress has been made in deriving algorithms that are efficient for certain combinations of system topologies and concurrent multiprocessing hardware, several issues must be resolved to incorporate transient simulation in the control design process for large space structures. Specifically, strategies must be developed that are applicable to systems with numerous degrees of freedom. In addition, the algorithms must have a growth potential in that they must also be amenable to implementation on forthcoming parallel system architectures. For mechanical system simulation, this fact implies that algorithms are required that induce parallelism on a fine scale, suitable for the emerging class of highly parallel processors; and transient simulation methods must be automatically load balancing for a wider collection of system topologies and hardware configurations. These problems are addressed by employing a combination range space/preconditioned conjugate gradient formulation of multi-degree-of-freedom dynamics. The method described has several advantages. In a sequential computing environment, the method has the features that: by employing regular ordering of the system connectivity graph, an extremely efficient preconditioner can be derived from the 'range space metric', as opposed to the system coefficient matrix; because of the effectiveness of the preconditioner, preliminary studies indicate that the method can achieve performance rates that depend linearly upon the number of substructures, hence the title 'Order N'; and the method is non-assembling. Furthermore, the approach is promising as a potential parallel processing algorithm in that the method exhibits a fine parallel granularity suitable for a wide collection of combinations of physical system topologies/computer architectures; and the method is easily load balanced among processors, and does not rely upon system topology to induce parallelism.

Kurdila, Andrew J.↗

Gluon fragmentation into quarkonium at next-to-leading order using FKS subtraction

We present the calculation at next-to-leading order (NLO) in a s of the fragmentation function of a gluon into heavy quarkonium in the color-octet spin-singlet S-wave channel. To calculate the real NLO corrections, we adapt a subtraction scheme introduced by Frixione, Kunszt, and Signer. Ultraviolet and infrared divergences in the real NLO corrections are calculated analytically by evaluating the phase-space integrals of the subtraction terms using dimensional regularization. The subtracted phase-space integrals are then evaluated in 4 space-time dimensions. The divergences in the virtual NLO corrections are also calculated analytically. After renormalization, all the divergences cancel. The NLO corrections significantly increase the fragmentation probability for a gluon into the spin-singlet quarkonium states η c and η b .

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Optimal Control of a Degenerate PDE for Surface Shape

Controlling the shapes of surfaces provides a novel way to direct self-assembly of colloidal particles on those surfaces and may be useful for material design. This motivates the investigation of an optimal control problem for surface shape in this paper. Specifically, we consider an objective (tracking) functional for surface shape with the prescribed mean curvature equation in graph form as a state constraint. The control variable is the prescribed curvature. We prove existence of an optimal control, and using improved regularity estimates, we show sufficient differentiability to make sense of the first order optimality conditions. This allows us to rigorously compute the gradient of the objective functional for both the continuous and discrete (finite element) formulations of the problem. Numerical results are shown to illustrate the minimizers and optimal controls on different domains.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Differential effects of redox conditions on the decomposition of litter and soil organic matter

Soil redox conditions exert substantial influence on biogeochemical processes in terrestrial ecosystems. Humid tropical forests are often characterized by fluctuating redox dynamics, yet how redox fluctuations affect patterns in soil versus litter decomposition and associated CO2 fluxes are not well understood in these ecosystems. We used a 13C-labeled litter addition to explicitly follow the decomposition of litter-derived vs. native soil-derived organic matter in response to four different soil redox regimes—static oxic or anoxic, and two oscillating treatments—in soil from the Luquillo Experimental Forest, Puerto Rico. We coupled this incubation experiment with high-resolution mass spectrometry analysis to characterize the preferential decomposition of specific classes of organic molecules. CO2 production from litter and soil organic matter (SOM) showed distinctly different responses to redox manipulation. The cumulative production of SOM-derived CO2 was positively correlated with the length of soil exposure to an oxic headspace (r = 0.89, n = 20), whereas cumulative 13C-litter-derived CO2 production was not linked to oxygen availability. The CO2 production rate from litter was highest under static anoxic conditions in the first half of the incubation period, and later dropped to the lowest among all redox treatments. In the consistently anoxic soils, we observed the depletion of more oxidized water-extractable organic matter (especially amino sugars, carbohydrates, and proteins) over time, suggesting that under anaerobic conditions, microbes preferentially used more oxidized litter-derived compounds during the early stages of decomposition. Results from kinetic modeling showed that more frequent anoxic exposure limited the decomposition of a slow-cycling C pool, but not a fast-cycling pool. Overall, our results demonstrate that substrate source—freshly added litter vs. native organic matter—plays an important role in the redox sensitivity of organic matter decomposition. In soil environments that regularly experience redox fluctuations, anaerobic heterotrophs can be surprisingly effective in degrading fresh plant litter.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

First-principles calculations of the electronic structure and optical properties of K{sub 1-x}Na{sub x}TaO{sub 3} (x=0, 0.25, 0.5, 0.75, 1)

The first-principles calculations are performed to investigate the cubic phase composite K{sub 1-x}Na{sub x}TaO{sub 3}(x=0, 0.25, 0.5, 0.75, 1), by using density functional theory (DFT) with the full potential linearized augmented plane wave (FP-LAPW) method. The energy band structures, density of states (DOS), electron density and optical properties are obtained. The results show that Na ion plays an important role in K{sub 1-x}Na{sub x}TaO{sub 3}. With the content of Na ion increasing, the changes of lattice parameters, energy gaps, bond lengths and optical properties of K{sub 1-x}Na{sub x}TaO{sub 3} are regular. Moreover, the dependence of ferroelectric photocatalysis on both optical properties and internal electronic structure are analyzed in detail. It is proposed that the doped materials are promising photocatalytic materials. - Graphical abstract: The density of states (DOS) of K{sub 1-x}Na{sub x}TaO{sub 3} (x=0.5). Highlights: Black-Right-Pointing-Pointer The first-principles calculations are performed, by using DFT with FP-LAPW method. Black-Right-Pointing-Pointer The changes of internal electronic structure and optical property of doped materials are regular. Black-Right-Pointing-Pointer The dependence of ferroelectric photocatalysis on optical properties is analyzed. Black-Right-Pointing-Pointer The dependence of ferroelectric photocatalysis on internal electronic structure is analyzed. Black-Right-Pointing-Pointer The doped materials are promising photocatalytic materials.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

TiO{sub 2} supported on rod-like mesoporous silica SBA-15: Preparation, characterization and photocatalytic behaviour

Highlights: Black-Right-Pointing-Pointer Rod-like SBA-15 and normal SBA-15 were used to prepare TiO{sub 2}/SBA-15 composites. Black-Right-Pointing-Pointer TiO{sub 2}/SBA-15 composites were studied as catalysts for methyl orange photodegradation. Black-Right-Pointing-Pointer TiO{sub 2}/Rod-SBA-15 exhibited higher photocatalytic activity than TiO{sub 2}/Nor-SBA-15. Black-Right-Pointing-Pointer The higher catalytic activity was a result of the controlled morphology of SBA-15. -- Abstract: TiO{sub 2} nanoparticles have been successfully incorporated in the pores of mesoporous silica SBA-15 with different morphologies by a wet impregnation method. The composites were characterized by powder X-ray diffraction (XRD), scanning electron microscopy (SEM), inductively coupled plasma (ICP) emission spectroscopy, transmission electron microscopy (TEM), N{sub 2}-sorption and UV-Vis diffuse reflectance spectroscopy. The photodegradation of methyl orange (MO) was used to study their photocatalytic property. It is indicated that the morphology of SBA-15 had a great influence on the photocatalytic activity of the composites. When TiO{sub 2}/SBA-15 composite was prepared by loading TiO{sub 2} nanoparticles on uniform rod-like SBA-15 of 1 {mu}m length, it showed higher photocatalytic degradation rate than that on less regular but much larger SBA-15 support. This difference was rationalized in terms of the homogeneously distributed and shorter channels of rod-like SBA-15, which favored mass transport and improved the efficient utilization of the pore surface.

36 MATERIALS SCIENCE↗

A new nonlinear reconstruction method based on total variation regularization of neutron penumbral imaging

Neutron penumbral imaging is a significant diagnostic technique in laser-driven inertial confinement fusion experiment. It is very important to develop a new reconstruction method to improve the resolution of neutron penumbral imaging. A new nonlinear reconstruction method based on total variation (TV) regularization is proposed in this paper. A TV-norm is used as regularized term to construct a smoothing functional for penumbral image reconstruction in the new method, in this way, the problem of penumbral image reconstruction is transformed to the problem of a functional minimization. In addition, a fixed point iteration scheme is introduced to solve the problem of functional minimization. The numerical experimental results show that, compared to linear reconstruction method based on Wiener filter, the TV regularized nonlinear reconstruction method is beneficial to improve the quality of reconstructed image with better performance of noise smoothing and edge preserving. Meanwhile, it can also obtain the spatial resolution with 5 {mu}m which is higher than the Wiener method.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗