Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “MAGNETRONS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,297 records · Page 72

Fabrication of por-Si/SnO{sub x} nanocomposite layers for gas microsensors and nanosensors

Two-phase nanocomposite layers based on porous silicon and nonstoichiometric tin oxide were fabricated by various methods. The structure, as well as elemental and phase composition, of the obtained nanocomposites were studied using transmission and scanning electron microscopy, Raman spectroscopy, Auger electron spectroscopy, and X-ray photoelectron spectroscopy. The results obtained confirm the formation of nanocomposite layers with a thickness as large as 2 {mu}m thick and SnO{sub x} stoichiometry coefficients x = 1.0-2.0. Significant tin diffusion into the porous silicon matrix with D{sub eff} Almost-Equal-To 10{sup -14} cm{sup 2} s{sup -1} was observed upon annealing at 770 K. Test sensor structures based on por-Si/SnO{sub x} nanocomposite layers grown by magnetron deposition showed fairly high stability of properties and sensitivity to NO{sub 2}.

36 MATERIALS SCIENCE↗

Mechanisms of charge transport in anisotype n-TiO{sub 2}/p-CdTe heterojunctions

Surface-barrier anisotype n-TiO{sub 2}/p-CdTe heterojunctions are fabricated by depositing thin titanium-dioxide films on a freshly cleaved surface of single-crystalline cadmium-telluride wafers by reactive magnetron sputtering. It is established that the electric current through the heterojunctions under investigation is formed by generation-recombination processes in the space-charge region via a deep energy level and tunneling through the potential barrier. The depth and nature of the impurity centers involved in the charge transport are determined.

36 MATERIALS SCIENCE↗

Synthesis,Structure and Electrical Properties of(SnO{sub 2}){sub x}(In{sub 2}O{sub 3}){sub 1-x}(x=0.5-1) Nanocomposites

The experimental results of synthesizing thin films (<1 {mu}m thick) of (SnO{sub 2}){sub x}(In{sub 2}O{sub 3}){sub 1-x} (x = 0.5-1 wt) nanocomposites fabricated by high-frequency magnetron sputtering of metal-oxide targets in a controlled Ar + O{sub 2} atmosphere are presented. The films, deposited on hot substrates (400 Degree-Sign C), are studied by the X-ray diffraction analysis, atomic-force microscopy, and optical and electrical methods. The effect of the synthesis conditions and film composition on the size of crystalline grains, band gap, and the concentration and mobility of free charge carriers was determined. It is shown that films of the composition (SnO{sub 2}){sub x}(In{sub 2}O{sub 3}){sub 1-x} with x = 0.9 are the most promising for applications in gas sensorics.

36 MATERIALS SCIENCE↗

Study of the recombination process at crystallite boundaries in CuIn{sub 1-x}Ga{sub x}Se{sub 2} (CIGS) films by microwave photoconductivity

The loss kinetics of photogenerated charge carriers in thin polycrystalline chalcopyrite CuIn{sub 1-x}Ga{sub x}Se{sub 2} (CIGS) films has been studied by microwave photoconductivity (at 36 GHz). The films were synthesized using the ampoule method and three variants of physical vapor deposition with subsequent selenization: magnetron sputtering, thermal deposition, and modified thermal deposition with intermetallic precursors. The photoconductivity was excited by 8-ns nitrogen laser pulses with maximum intensity of 4 Multiplication-Sign 10{sup 14} photons/cm per pulse. Measurements were performed in the temperature range 148-293 K. The photoresponse amplitude is found to depend linearly on the sizes of coherent-scattering regions in the film grains, which were calculated from X-ray diffraction data. The photoresponse decay obeys hyperbolic law. The photoresponse half-decay time increases with a decrease in both temperature and light intensity. It is shown that the recombination of free holes with trapped electrons is very efficient near the crystallite boundaries.

36 MATERIALS SCIENCE↗

Effect of ion treatment on the properties of In{sub 2}O{sub 3}:Sn films

Variations in the properties of Indium-Tin-Oxide (ITO) films grown by reactive HF (high-frequency) magnetron deposition with simultaneous ion treatment are studied depending on the ion-treatment current and substrate temperature. Ion treatment of the growing film during deposition insignificantly changes the relative content of tin and indium, but significantly increases the conductivity. Films obtained at a temperature below 50 Degree-Sign C without ion treatment are X-ray amorphous. Ion treatment and an increase in the condensation temperature lead to film crystallization and a shift of the optical absorption edge to short wave-lengths. An increase in the ion-treatment current causes texture formation.

36 MATERIALS SCIENCE↗

Use of double-layer ITO films in reflective contacts for blue and near-UV LEDs

The structural and optical properties of multilayer ITO/SiO{sub 2}/Ag composites are studied. In these composites, the ITO (indium-tin oxide) layer is produced by two different methods: electron-beam evaporation and a combined method including electron-beam evaporation and subsequent magnetron sputtering. It is shown that the reflectance of the composite based on the ITO film produced by electron-beam evaporation is substantially lower. This can be attributed to the strong absorption of light at both boundaries of the SiO{sub 2} layer, which results from the complex surface profile of ITO films deposited by electron-beam evaporation. Samples with a film deposited by the combined method have a reflectance of about 90% at normal light incidence, which, combined with their higher electrical conductivity, makes these samples advantageous for use as reflective contacts to the p-type region of AlInGaN light-emitting diodes of the flip-chip design.

36 MATERIALS SCIENCE↗

Electrooptical properties and structural features of amorphous ITO

Thin indium-tin oxide (ITO) films are deposited onto cold substrates by magnetron-assisted sputtering. The dependences of the structural, electrical, and optical properties of the films on the oxygen content in the atmosphere of sputtering and the growth rate are studied. It is shown that, if the substrate temperature is no higher than the ITO crystallization temperature and the conditions of growth deviate from the optimal relationship between the oxygen pressure and the growth rate, the resistance of the layers can be six or seven orders of magnitude higher than the resistance of conducting amorphous layers and reach hundreds of megaohms. At the same time, the optical properties of insulating layers in the visible spectral region are completely identical to the properties of the conducing amorphous modification. A conceptual model of defects responsible for the insulating properties of amorphous ITO is proposed.

36 MATERIALS SCIENCE↗

Technique for forming ITO films with a controlled refractive index

A new method for fabricating transparent conducting coatings based on indium-tin oxide (ITO) with a controlled refractive index is proposed. This method implies the successive deposition of material by electron-beam evaporation and magnetron sputtering. Sputtered coatings with different densities (and, correspondingly, different refractive indices) can be obtained by varying the ratio of the mass fractions of material deposited by different methods. As an example, films with effective refractive indices of 1.2, 1.4, and 1.7 in the wavelength range of 440–460 nm are fabricated. Two-layer ITO coatings with controlled refractive indices of the layers are also formed by the proposed method. Thus, multilayer transparent conducting coatings with desired optical parameters can be produced.

36 MATERIALS SCIENCE↗

Electrical Properties of p-NiO/n-Si Heterostructures Based on Nanostructured Silicon

Silicon nanowires are formed on n-Si substrates by chemical etching. p-NiO/n-Si heterostructures are fabricated by reactive magnetron sputtering. The energy diagram of anisotype p-NiO/n-Si heterostructures is constructed according to the Anderson model. The current–voltage and capacitance–voltage characteristics are measured and analyzed. The main current-transport mechanisms through the p-NiO/n-Si heterojunction under forward and reverse biases are established.

36 MATERIALS SCIENCE↗

Structural, Thermal and Luminescence Properties of AlN:Tm Thin Films Deposited on Silicon Substrate and Optical Fiber

Thin films of AlN:Tm are deposited on a Si(111) and Si(100) substrates and optical fiber by rf magnetron sputtering method. 200–400 nm thick films are deposited at various temperatures to observe the effect of temperature on their structure and morphology. Liquid nitrogen is used to deposit films at low temperature of –196°C. An electric heater is used to grow films at 250–700°C range. The deposited films are analyzed for their structure and thermal stability using X-ray diffraction and thermogravimetric analysis. Films deposited at liquid nitrogen temperature are amorphous and those deposited at high temperature are crystalline. Average grain size, strain and interatomic distance of the crystalline films are calculated. The grain size and inter-atomic distance increase from 36.54 to 45.12 nm and from 0.2368 to 0.25 nm respectively. Photoluminescence of the films excited by 783 nm crystal laser shows an intense infrared emission from Tm{sup +3} at 802 nm as a result of {sup 3}H{sub 4} → {sup 3}H{sub 6} transition.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Technique for the Formation of Antireflection Coatings Based on ITO Films

A technique for forming transparent conducting indium-tin-oxide films for applications, which require high current densities, are considered. These films have to combine a good surface conductivity with an increased transmittance of radiation within a wide wavelength range. A two-stage process is designed to fabricate such coatings: at the first stage, a dense indium-tin-oxide film with high electrical conductivity is formed; then, an additional antireflection layer of the same material is deposited. Possible methods for optimizing these additional indium-tin-oxide films obtained by forming nanostructured self-assembled coatings on the surface of dense films are investigated. It is shown that the best light extraction over a wide wavelength range is provided by the composite film-deposition technique, which consists in the deposition of self-assembled nanostructured coatings by electron-beam evaporation on a hot substrate and the further filling of voids by magnetron sputtering at room temperature. Since the optical properties of the obtained antireflection coatings depend on the mass ratio of materials deposited at each stage, the technique makes it possible to optimize the film properties on the basis of problems specified by the area of their application. Computer simulation of the behavior of the material distribution in the structure of the studied coatings confirms the ability of the method of combined film deposition to form the smoothest character of the change in the effective refractive index of the coating structure, which leads to the most efficient extraction of optical-range light.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Laser Annealing of Thin ITO Films on Flexible Organic Substrates

Indium–tin oxide (ITO) thin films on polyethylene-terephthalate film substrates are fabricated at room temperature by reactive magnetron sputtering. The minimum of the resistivity of ITO films formed at room temperature is 4.5 × 10 -4 Ω cm. The laser annealing of ITO films from 140 to 600 nm in thickness increases their conductivity from 10 to 24% depending on the energy density to the film and irradiation dose. It is established that the laser annealing of films up to 250 nm in thickness is efficient at an energy density in the range from 12 to 35 mJ/cm 2 . Films from 390 to 600 nm in thickness should be annealed by laser radiation with an energy density of no lower than 46 mJ/cm 2 . A model problem taking into account the influence of radiative cooling and heat exchange of the film and the substrate on the variation in the film temperature over time during laser annealing is considered. A one-dimensional thermal conductivity equation for a bilayer medium is used. The maximal stresses in the ITO film under various annealing modes are calculated.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Nanostructured ITO/SiO{sub 2} Coatings

The influence of a SiO{sub 2} layer deposited onto nanostructured transparent conductive films of indium and tin oxide (ITO) on their optical characteristics is investigated. For this purpose, SiO{sub 2} films of various thicknesses are deposited by magnetron sputtering on samples with ITO films containing whiskers of preferentially vertical orientation and possessing steadily decreasing reflectance. It is shown that this makes it possible to attain noticeable coating antireflection under the condition of the uniform overgrowth of ITO whiskers by the SiO{sub 2} layer. The influence of the SiO{sub 2} layer on the optical characteristics of a dense unstructured ITO film is also investigated. The results for structured and unstructured ITO/SiO{sub 2} coatings with identical material mass contents are compared. It is noted that due to the liability of ITO material to degradation during operation in the composition of transparent conductive contacts, the results can also be interesting for the formation of coatings more resistant to the effect of the environment.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Investigation of the Current–Voltage Characteristics of New MnO{sub 2}/GaAs(100) and V{sub 2}O{sub 5}/GaAs(100) Heterostructures Subjected to Heat Treatment

Complex oxide films with a thickness of about 200 nm are formed during the thermal oxidation of GaAs with magnetron-deposited V{sub 2}O{sub 5} and MnO{sub 2} nanolayers. The electrical parameters of the films (reverse-bias breakdown voltage and current density) are determined by the method of current–voltage (I–V) characteristics at room temperature in the bias range from –5 to +5 V, and their composition and surface morphology are investigated. It is shown that V{sub 2}O{sub 5} facilitates the more intense (in comparison with MnO{sub 2}) chemical bonding of arsenic at the internal interface with the formation of As{sub 2}O{sub 5}. As a result, thermally oxidized V{sub 2}O{sub 5}/GaAs heterostructures exhibit higher breakdown voltages.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Some Physical Properties of the New Intermetallic Compound NbCd{sub 2}

Solid solutions of cadmium in niobium and NbCd{sub 2} phase are formed by magnetron sputtering and coprecipitation on substrates moving relative to the flow of Nb and Cd particles. The NbCd{sub 2} phase can be described by a tetragonal unit cell with the parameters a = 0.84357 nm, c = 0.54514 nm, and c/a = 0.6426. A very high hole concentration in NbCd{sub 2} is established by studying the coating absorption and transmission spectra corresponding to the intermetallic-compound composition near the fundamental absorption edge, determining the band gap, and measuring the carrier mobility. Such a concentration is characteristic of a strongly degenerate semiconductor or metal. The band gap is determined to be 1.26 eV. The variation in the concentration of carriers and their mobility depending on the cadmium concentration in coatings of the Nb–Cd system confirms the occurrence of the NbCd{sub 2} phase.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Formation of ncl-Si in the Amorphous Matrix a-SiO{sub x}:H Located near the Anode and on the Cathode, Using a Time-Modulated DC Plasma with the (SiH{sub 4}–Ar–O{sub 2}) Gas Phase (C{sub O{sub 2}} = 21.5 mol %)

The formation of ncl-Si in the amorphous matrix a-SiO{sub x}:H using a time-modulated DC plasma at an elevated oxygen content of C{sub O{sub 2}} = 21.5 mol % in a gas mixture of (SiH{sub 4}–Ar–O{sub 2}) is investigated. Plasma modulation implies the repeated (n = 180) switching on (for t{sub on} = 5, 10, 15 s) and switching off (for t{sub off} = 5, 10, 15 s) of the magnet coil of the DC magnetron. The effect of self-induction is used to enhance the processes of SiH{sub 4} dissociation, the formation of Si nanoparticles, and the ionization of oxygen and ncl-Si flows towards the electrodes. The samples are located both on an electrically isolated substrate holder near the anode and on the cathode (beyond its erosion zone). These experiments show that the shape of the dependences of the photoluminescence intensity I{sub PL}{sup ncl−Si} on the wavelength Λ are identical for all pairs of samples on the anode and cathode. When the t{sub on} value is small (t{sub on} = 5 s), the difference in the sample location only slightly affects the infrared (IR) spectra. At longer times t{sub on} (≥10 s) and a short time t{sub off} (5 s), the amorphous matrix located on the cathode is enriched with oxygen (as compared with that near the anode). The optimal plasma-modulation parameters are found to be t{sub off}/t{sub on} = 5, 10, 15/10 and t{sub off}/t{sub on} = 5, 10/15; under these conditions, the amorphous matrix has a “perfect structure” and is transparent to radiation, and the I{sub PL}{sup ncl−Si} value is the largest in the range λ ≈ 0.75–0.9 μm.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Growth and Structural, Magnetic, and Magnetooptical Properties of ZnO Films Doped with a Fe{sup 57} 3d Impurity

ZnO films obtained by high-frequency magnetron sputtering and doped with a Fe{sup 57} metallic 3d impurity by the diffusion method are studied. The type of local environment of Fe{sup 57} impurity atoms on varying the deposition parameters of ZnO films is determined by Mössbauer spectroscopy. It is established that the ground state of Fe{sup 57} impurity atoms corresponds to metallic iron in the magnetically ordered state and there is a small fraction of Fe{sup 57} atoms with a local environment corresponding to the complex oxide Fe{sub 3}O{sub 4}, having the magnetically ordered state; there is also a fraction of iron atoms in the paramagnetic state. The magnetic and magnetooptical parameters of the films were measured using magnetooptic Kerr effect. The spectral dependences of the polar magnetooptic Kerr effect in ZnO(Fe{sup 57}) films are measured in a photon energy range of 1.5–4.5 eV and simulated by the effective-medium method. It is established that ZnO(Fe{sup 57}) possess an easy-plane magnetic anisotropy with a magnetization lying in the film plane.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Microstructure and Mechanical Properties of Multilayer α-AlN/α-BCN Coating as Functions of the Current Density during Sputtering of a B{sub 4}C Target

Multilayer AlN/BCN coating of nanometer scale have been prepared by magnetron sputtering of Al and B{sub 4}C targets in an argon–nitrogen atmosphere during deposition on a Si substrate. These coating have an X-ray amorphous structure and the maximum Knoop hardness of 27 GPa (at the current density 100 mA). The first-principle molecular dynamics calculations show that the B4–BN layer is dynamically unstable; thus, it will not be epitaxial and will be amorphous or have a structure different from the B4–BN structure. The thermal vacuum annealing from 600 to 800°C of samples with multilayer nanosized coating leads to the decrease in the Knoop hardness to 18 GPa; however, the coating structure is retained X-ray amorphous.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗