Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Large Crystal”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,297 records · Page 72

Studies on Ca2+-Doped CeBr3 Scintillating Materials

Despite the outstanding scintillation performance characteristics of cerium tribromide (CeBr3) and cerium-activated lanthanum tribromide (LaBr3:Ce), their commercial availability and application is limited due to the difficulties of growing large, crack-free single crystals from these fragile materials. The objective of this investigation was to employ aliovalent doping to increase crystal strength while maintaining the optical properties of the crystal. One divalent dopant (Ca2+) was investigated as a dopant to strengthen CeBr3 without negatively impacting scintillation performance. Ingots containing nominal concentrations of 1.9% of the Ca2+ dopant were grown. Preliminary scintillation measurements are presented for this aliovalently doped scintillator. Ca2+-doped CeBr3 exhibited little or no change in the peak fluorescence emission for 371 nm optical excitation for CeBr3. The structural, electronic, and optical properties of CeBr3 crystals were investigated using the density functional theory within generalized gradient approximation. The calculated lattice parameters are in good agreement with the experimental data. The energy band structures and density of states were obtained. The optical properties of CeBr3, including the dielectric function, were calculated.

aliovalent substitution↗

Methods of growing CdTe-based materials at high rates

Systems and methods for growing high-quality CdTe-based materials at high growth rates are provided. According to an aspect of the invention, a method includes depositing a first CdTe-based layer on a CdTe-based template at a rate of greater than 1 .mu.m/min. Each of the first CdTe-based layer and the CdTe-based template has a single-crystal structure and/or a large-grain polycrystalline structure. The depositing is performed by physical vapor deposition.

36 MATERIALS SCIENCE↗

Structures of the Wild-Type And Activated Catalytic Domains of Brachydanio Rerio Polo-Like Kinase 1 (Plk1): Changes in the Active-Site Conformation And Interactions With Ligands

Polo-like kinase 1 (Plk1) is a member of a family of serine/threonine kinases involved in the regulation of cell-cycle progression and cytokinesis and is an attractive target for the development of anticancer therapeutics. A zebrafish homolog of the human Plk1 (hPlk1) kinase domain (KD) was identified that can be expressed in large quantities in bacteria and crystallizes readily, whether in a wild-type form or as a variant containing the activating Thr196-->Asp substitution, in one space group and under similar conditions both in the absence and presence of active-site compounds. This construct was validated by testing a panel of hPlk1 inhibitors against human and zebrafish proteins and it was shown that the selected small molecules inhibited the homologs with a high degree of correlation. Crystal structures of ligand-free wild-type and activated zebrafish Plk1 (zPlk1) KDs revealed the organization of the secondary structural elements around the active site and demonstrated that the activation segment was disordered in the activated form of the domain but possessed a well defined secondary structure in the wild-type enzyme. The cocrystal structure of wild-type zPlk1 KD with ADP documented the hydrolysis of ATP and revealed the phosphorylation site. The cocrystal structure of the activated KD with wortmannin, a covalent inhibitor of Plk1 and PI3 kinases, showed the binding mode of the small molecule to the enzyme and may facilitate the design of more potent Plk1 inhibitors. The work presented in this study establishes the zPlk1 KD as a useful tool for rapid low- and high-throughput structure-based screening and drug discovery of compounds specific for this mitotic target.

36 MATERIALS SCIENCE↗

Validation of crystallographic models containing TLS or other descriptions of anisotropy

Guidelines and specific tests for validating macromolecular crystal structures that include TLS models are introduced. Validation may used to troubleshoot problems during refinement, to confirm the internal consistency of the model as part of deposition into the Protein Data Bank or to assess the plausibility of interpretating the boundary between two TLS groups as indicating a hinge point between structural domains. The use of TLS (translation/libration/screw) models to describe anisotropic displacement of atoms within a protein crystal structure has become increasingly common. These models may be used purely as an improved methodology for crystallographic refinement or as the basis for analyzing inter-domain and other large-scale motions implied by the crystal structure. In either case it is desirable to validate that the crystallographic model, including the TLS description of anisotropy, conforms to our best understanding of protein structures and their modes of flexibility. A set of validation tests has been implemented that can be integrated into ongoing crystallographic refinement or run afterwards to evaluate a previously refined structure. In either case validation can serve to increase confidence that the model is correct, to highlight aspects of the model that may be improved or to strengthen the evidence supporting specific modes of flexibility inferred from the refined TLS model. Automated validation checks have been added to the PARVATI and TLSMD web servers and incorporated into the CCP4i user interface.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Large magnetoresistance and Fermi surface study of Sb 2 Se 2 Te single crystal

Here, we have studied the magnetotransport properties of a Sb 2 Se 2 Te single crystal. Magnetoresistance (MR) is maximum when the magnetic field is perpendicular to the sample surface and reaches a value of 1100% at B = 31 T with no sign of saturation. MR shows Shubnikov de Haas (SdH) oscillations above B = 15 T. The frequency spectrum of SdH oscillations consists of three distinct peaks at α = 32 T, β = 80 T, and γ = 117 T indicating the presence of three Fermi surface pockets. Among these frequencies, β is the prominent peak in the frequency spectrum of SdH oscillations measured at different tilt angles of the sample with respect to the magnetic field. From the angle dependence β and Berry phase calculations, we have confirmed the trivial topology of the β-pocket. The cyclotron masses of charge carriers, obtained by using the Lifshitz–Kosevich formula, are found to be m$*\atop{β}$= 0.16m o and m$*\atop{γ}$= 0.63m o for the β and γ bands, respectively. The Large MR of Sb 2 Se 2 Te is suitable for utilization in electronic instruments such as computer hard discs, high field magnetic sensors, and memory devices.

36 MATERIALS SCIENCE↗

Analysis of crystallization data in the Protein Data Bank

In a large-scale study using data from the Protein Data Bank, some of the many reported findings regarding the crystallization of proteins were investigated. The Protein Data Bank (PDB) is the largest available repository of solved protein structures and contains a wealth of information on successful crystallization. Many centres have used their own experimental data to draw conclusions about proteins and the conditions in which they crystallize. Here, data from the PDB were used to reanalyse some of these results. The most successful crystallization reagents were identified, the link between solution pH and the isoelectric point of the protein was investigated and the possibility of predicting whether a protein will crystallize was explored.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Protein Crystal Growth With the Aid of Microfluidics

Protein crystallography is one of three well-known methods to obtain the structure of proteins. A major rate limiting step in protein crystallography is protein crystal nucleation and growth, which is still largely a process conducted by trial-and-error methods. Many attempts have been made to improve protein crystal growth by performing growth in microgravity. Although the use of microgravity appears to improve crystal quality in some attempts, this method has been inefficient because several reasons: we lack a fundamental understanding of macromolecular crystal growth in general and of the influence of microgravity in particular, we have to start with crystal growth conditions in microgravity based on conditions on the ground and finally the hardware does not allow for experimental iteration without reloading samples on the ground. To partially accommodate the disadvantages of the current hardware, we have used microfluidic technology (Lab-on-a-Chip devices) to design the concept of a more efficient crystallization device, suitable for use on the International Space Station and in high-throughput applications on the ground. The concept and properties of microfluidics, the application design process, and the advances in protein crystal growth hardware will be discussed in this presentation. Some examples of proteins crystallized in the new hardware will be discussed, including the differences between conventional crystallization versus crystallization in microfluidics.

vanderWoerd, Mark↗

Overcoming Secondary Nucleation of Misoriented Domains during Wafer-Scale Epitaxy of Single-Crystal Graphene on Ge(110)

The wafer-scale synthesis of single-crystal graphene on technologically important substrates is a major challenge inhibiting the development of next-generation devices that harness the exceptional electronic, thermal, and mechanical properties of single-crystal graphene. Here, in this work, the factors controlling the domain orientation of graphene grown epitaxially on Ge(110) are elucidated, and this insight is utilized to produce graphene with minimal polycrystallinity. In the early stages of growth, most graphene islands have unidirectionally aligned lattices. However, we discover a secondary nucleation phenomenon in which misoriented graphene domains nucleate near/from the island edges, introducing defective grain boundaries and significantly increasing polycrystallinity throughout growth. We find that secondary nucleation occurs when islands grow over Ge steps, which form because of an interplay between the island growth and Ge surface topography evolution. Strategies for suppressing secondary nucleation are developed, enabling the synthesis of graphene in which the predominant crystal orientation has high coverage >99% and low rotational spread <0.6°. This work overcomes the irreproducibility of graphene epitaxy on Ge(110) reported in the literature, providing a route toward the large-area synthesis of single-crystal graphene on technologically useful semiconductors.

chemical vapor deposition↗

Growth experiment of narrow band-gap semiconductor PbSnTe single crystals in space (M-1)

An experiment on crystal growth of Pb(1-x)Sn(x)Te in microgravity is planned. This material is an alloy of the compound semiconductors PbTe and SnTe. It is a promising material for infrared diode lasers and detectors in the wavelength region between 6 and 30 micron. Since the electrical properties of Pb(1-x)Sn(x)Te depend greatly on the Pb/Sn ratio and crystalline defects as well as impurity concentration, homogeneous, defect-free, high-quality crystals are anticipated. Although many growth methods, such as the pulling method, the Bridgman method, the vapor growth method, etc., have been applied to the growth of Pb(1-x)Sn(x)Te, large, homogeneous, low-defect-density crystals have not yet been grown on Earth. The unsuccessful results were caused by buoyancy-driven convection in the fluids induced by the specific gravity difference between heated and cooled fluids on Earth. A crystal is grown by cooling the melt from one end of the ampoule. In crystal growth from the melt, about 30 percent of the SnTe in the melt is rejected at the solid-liquid interface during solidification. On Earth, the rejected SnTe is completely mixed with the remaining melt by convection in the melt. Therefore, SnTe concentration in the melt, and accordingly in the crystal, increases as the crystal grows. In the microgravity environment, buoyancy-driven convection is suppressed because the specific gravity difference is negligible. In that case, the rejected SnTe remains at the solid-liquid interface and its concentration increases only at the interface. If the growth rate is higher than the PbTe-SnTe interdiffusion rate, the amount of SnTe which diffuses from the interface into the melt increases as SnTe piles up at the interface, and finally it balances the amount of rejected SnTe during solidification, resulting in steady-state SnTe transportation at the interface. By using this principle, compositionally homogeneous crystals can be grown. Furthermore, low-defect-density crystals will be grown in microgravity, because convection causes crystalline defects by mising hot and cold fluids and generating temperature fluctuations in them.

Yamada, Tomoaki↗

Proton Irradiation Response of CsI(Tl) Crystals for the GLAST Calorimeter

The electromagnetic calorimeter of the Gamma-Ray Large Area Space Telescope (GLAST) consists of 16 towers of CsI(Tl) crystals. Each tower contains 8 layers of crystals (each 326.0 x 26.7 x 19.9 mm{sup 3}) arranged in a hodoscopic fashion. The crystals are read out at both ends with photodiodes. Crystals produced by Amcrys-H (Ukraine) are used. A full size crystal was irradiated with a 180 MeV proton beam and the radiation induced attenuation was measured. The induced radioactivity of the crystal was also studied. In this paper we will discuss the damage due to proton irradiation and compare this with the expected in-orbit background flux.

29 ENERGY PLANNING, POLICY, AND ECONOMY↗

Fourier transform infrared spectroscopy measurements of multi-phonon and free-carrier absorption in ZnO

Fourier transform infrared (FTIR) measurements were carried out on thin films and bulk single crystals of ZnO over a wide temperature range to study the free-carrier and multi-phonon infrared absorptions and the effects of hydrogen incorporation on these properties. Aluminum-doped ZnO thin films were deposited on quartz substrates using atomic-layer deposition (ALD) and sol–gel methods. Hall-effect measurements showed that the ALD films have a resistivity of ρ = 1.11 × 10 –3 Ω cm, three orders of magnitude lower than sol–gel films (ρ = 1.25 Ω cm). This result is consistent with the significant difference in their free-carrier absorption as revealed by FTIR spectra obtained at room temperature. By reducing the temperature to 80 K, the free carriers were frozen out, and their absorption spectrum was suppressed. From the FTIR measurements on ZnO single crystals that were grown by the chemical vapor transport method, we identified a shoulder around 3350 cm –1 and associated it with the presence of two or more hydrogen ions in a Zn vacancy. After reducing the hydrogen level in the crystal, the measurements revealed the multi-phonon absorption of ZnO in the range of 700–1200 cm –1 . Furthermore, this study shows that the multi-phonon absorption bands can be completely masked by the presence of a large concentration of hydrogen in the crystals.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Specific features of formation of GaAs nanowire crystals during molecular beam epitaxy on different silicon surfaces

The results of experimental studies on the growth and the morphological and structural properties of GaAs nanowire crystals on different silicon surfaces are reported. It is shown that the nonplanar geometrical layout of growth allows the production of epitaxial nanowire crystals in a system with a large lattice mismatch. The growth on porous substrates, the role of the surface orientation, high-temperature annealing, and presence of an oxide layer at the surface, and some other effects typical of growth of III-V nanowire crystals on the Si surface are studied and analyzed. Intense emission from the array of GaAs nanowire crystals grown on the Si (111) surface is observed.

36 MATERIALS SCIENCE↗

Effect of Hf-Rich Particles on the Creep Life of a High-strength Nial Single Crystal Alloy

Additions of small amounts of Hf and Si to NiAl single crystals significantly improve their high-temperature strength and creep properties. However, if large Hf-rich dendritic particles formed during casting of the alloyed single crystals are not dissolved completely during homogenization heat treatment, a large variation in creep rupture life can occur. This behavior, observed in five samples of a Hf containing NiAl single crystal alloy tested at 1144 K under an initial stress of 241.4 MPa, is described in detail highlighting the role of interdendritic Hf-rich particles in limiting creep rupture life.

Garg, A.↗

CaCoSO diluted magnetic antiferromagnet semiconductor as efficient thermoelectric materials

Highlights: • CaCoSO exhibit direct (Γ{sup v}- Γ{sup c}) gap of about 2.187 eV for spin-up (↑). • CaCoSO exhibit direct (K{sup v}-K{sup c}) gap of about 1.187 eV for spin-down(↓). • An indirect gap (Γ{sup v}-K{sup c}) of about 0.4 eV for the spin-polarized CaCoSO. • Small gap turn CaCoSO to be as promising candidate for thermoelectric materials. - Abstract: We have reported the thermoelectric properties of the recently synthesized CaCoSO single crystal by Salter et al. in 2016. It is quite interesting to mention that CaCoSO single crystals exhibit a direct energy gap (Γ{sup v}- Γ{sup c}) of about 2.187 eV for the spin-up (↑) channel, which turns out to be a (K{sup v}-K{sup c}) direct gap of about 1.187 eV for the spin-down (↓) channel, resulting in an indirect gap (Γ{sup v}-K{sup c}) of about 0.4 eV for the spin-polarized CaCoSO single crystal. Such a small gap makes CaCoSO a promising candidate for thermoelectric materials. Calculations reveal a remarkable finding that the CaCoSO single crystal exhibits high electrical conductivity, low thermal conductivity and a large Seebeck coefficient; therefore, based on these findings, the CaCoSO single crystal may be considered an efficient thermoelectric material. The electron clouds of CaO{sub 3}S{sub 4} and CoS{sub 3}O exhibit a planar shape with conjugated electron orbitals and exhibit a strong covalent Ca−O, Co−O bonding. This is another factor which makes CaCoSO a promising candidate for thermoelectric materials, since covalent bonding is more favorable for the transport of the carriers than ionic bonding. CaO{sub 3}S{sub 4} and CoS{sub 3}O are the main sources for the thermoelectric generator in CaCoSO. Therefore, based on the above findings, we can conclude that CaCoSO could be a promising thermoelectric material.

36 MATERIALS SCIENCE↗

Edge-Controlled Growth and Etching of Two-Dimensional GaSe Monolayers

Understanding the atomistic mechanisms governing the growth of two-dimensional (2D) materials is of great importance in guiding the synthesis of wafer-sized, single-crystalline, high-quality 2D crystals and heterostructures. Etching, in many cases regarded as the reverse process of material growth, has been used to study the growth kinetics of graphene. In this paper, we explore a growth–etching–regrowth process of monolayer GaSe crystals, including single-crystalline triangles and irregularly shaped domains formed by merged triangles. We show that the etching begins at a slow rate, creating triangular, truncated triangular, or hexagonally shaped holes that eventually evolve to exclusively triangles that are rotated 60° with respect to the crystalline orientation of the monolayer triangular crystals. The regrowth occurs much faster than etching, reversibly filling the etched holes and then enlarging the size of the monolayer crystals. A theoretical model developed based on kinetic Wulff construction (KWC) theory and density functional theory (DFT) calculations accurately describe the observed morphology evolution of the monolayer GaSe crystals and etched holes during the growth and etching processes, showing that they are governed by the probability of atom attachment/detachment to/from different types of edges with different formation energies of nucleus/dents mediated by chemical potential difference Δμ between Ga and Se. Finally, our growth–etching–regrowth study provides not only guidance to understand the growth mechanisms of 2D binary crystals but also a potential method for the synthesis of large, shape-controllable, high-quality single-crystalline 2D crystals and their lateral heterostructures.

36 MATERIALS SCIENCE↗

Visualizing defects and pore connectivity within metal–organic frameworks by X-ray transmission tomography

Metal–Organic Frameworks (MOFs) have the potential to change the landscape of molecular separations in chemical processes owing to their ability of selectively binding molecules. Their molecular sorting properties generally rely on the micro- and meso-pore structure, as well as on the presence of coordinatively unsaturated sites that interact with the different chemical species present in the feed. In this work, we show a first-of-its-kind tomographic imaging of the crystal morphology of a metal– organic framework by means of transmission X-ray microscopy (TXM), including a detailed data reconstruction and processing approach. Corroboration with Focused Ion Beam-Scanning Electron Microscopy (FIB-SEM) images shows the potential of this strategy for further (non-destructively) assessing the inner architecture of MOF crystals. By doing this, we have unraveled the presence of large voids in the internal structure of a MIL-47(V) crystal, which are typically thought of as rather homogeneous lattices. This challenges the established opinion that hydrothermal syntheses yield relatively defect-free material and sheds further light on the internal morphology of crystals.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗