Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “ISOTHERMS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,297 records · Page 72

Exploitation of Pore Structure for Increased CO 2 Selectivity in Type 3 Porous Liquids

CO 2 capture requires materials with high adsorption selectivity and an industrial ease of implementation. To address these needs, a new class of porous materials was recently developed that combines the fluidity of solvents with the porosity of solids. Type 3 porous liquids (PLs) composed of solvents and metal–organic frameworks (MOFs) offer a promising alternative to current liquid carbon capture methods due to the inherent tunability of the nanoporous MOFs. However, the effects of MOF structural features and solvent properties on CO 2 –MOF interactions within PLs are not well understood. Herein experimental and computational data of CO 2 gas adsorption isotherms were used to elucidate both solvent and pore structure influences on ZIF-based PLs. The roles of the pore structure including solvent size exclusion, structural environment, and MOF porosity on PL CO 2 uptake were examined. A comparison of the pore structure and pore aperture was performed using ZIF-8, ZIF-L, and amorphous-ZIF-8. Adsorption experiments here have verified our previously proposed solvent size design principle for ZIF-based PLs (1.8× ZIF pore aperture). Furthermore, the CO 2 adsorption isotherms of the ZIF-based PLs indicated that judicious selection of the pore environment allows for an increase in CO 2 selectivity greater than expected from the individual PL components or their combination. This nonlinear increase in the CO 2 selectivity is an emergent behavior resulting from the complex mixture of components specific to the ZIF-L + 2'-hydroxyacetophenone-based PL.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Facile Interfacial Reduction Suppresses Redox Chemical Expansion and Promotes the Polaronic to Ionic Transition in Mixed Conducting (Pr,Ce)O 2−δ Nanoparticles

Mixed ionic/electronic conductors (MIECs) are essential components of solid-state electrochemical devices, such as solid oxide fuel/electrolysis cells. For efficient performance, MIECs are typically nanostructured, to enhance the reaction kinetics. However, the effect of nanostructuring on MIEC chemo-mechanical coupling and transport properties, which also impact cell durability and efficiency, has not yet been well understood. Here, in this work, Pr 0.2 Ce 0.8 O 2−δ (PCO20) nanopowders were prepared by coprecipitation, then sintered in a modified dilatometer at three different temperatures (600, 725, and 850 °C) for microstructure evolution, resulting in three samples with different average particle sizes (23, 30, and 53 nm). The chemical strain and electronic/ionic conductivity were then measured simultaneously on stable nanostructures in four isotherms from 550 to 400 °C with steps in pO 2 (1 to 10 –4 atm O 2 ). A microcrystalline bar was prepared and measured for comparison. Particle size reduction led to a monotonically decreasing isothermal redox chemical strain, confirmed by in situ high-temperature, controlled-atmosphere XRD measurements. The corresponding conductivity measurements provided defect chemical insight into the particle size-dependent chemical expansion behavior. The significant weakening of the pO 2 dependence and decreased activation energy for electrical conduction with decreasing particle size indicated a decrease in the reduction enthalpy of PCO, shifting the transition from (Pr) polaronic to ionic behavior to higher pO 2 . STEM-EELS measurements confirmed the majority of Pr was reduced to 3+ in the nanoparticles, while Ce remained 4+. These results demonstrate suppression of deleterious chemical expansion and tailoring of the dominant charge carrier simply through controlling the particle size, providing insights for MIEC microstructural design.

ceria↗

Path-Dependent Preparation of Complex Micelle Packings of a Hydrated Diblock Oligomer

Small-angle X-ray scattering analyses reveal that the hydrated diblock oligomer n-C 16 H 23 (OCH 2 CH 2 )20-OH (C 16 E 20 or Brij 58) forms lyotropic liquid crystals (LLCs) exhibiting face-centered cubic (FCC), body-centered cubic (BCC), Frank–Kasper (FK) A 15 , and cylindrical (HI) morphologies over the concentration range 30–65 wt % amphiphile. Heating LLCs comprising 54–59 wt % C 16 E 20 drives the temperature-dependent phase transition sequence: A 15 → BCC → HI. However, rapidly quenching the resulting HI phase from 70 to 25 °C initially forms a BCC phase that isothermally transforms into a complex, tetragonal FK σ phase comprising 30 quasispherical micelles. The metastability of this micellar σ phase is shown to depend on the sample cooling rate, thermal quench depth, and isothermal annealing temperature. We rationalize the preference for the A15 structure at 25 °C in terms of minimizing unfavorable water/hydrophobic contacts, while maximizing local particle sphericity. The symmetry breaking transition kinetics in these micellar LLCs apparently stem from the temperature-dependent activation barriers for phase nucleation and growth, which are intimately coupled to the time scales for micelle reconfiguration by amphiphile chain exchange and their spatial rearrangement. These findings highlight how thermal processing influences nucleation and growth of the self-assembled morphologies of intrinsically reconfigurable, soft spherical particles.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Rapid Construction of Fe–Co–Ni Composition-Phase Map by Combinatorial Materials Chip Approach

100 nm thick Fe-Co-Ni materials chips were prepared and isothermally annealed at 500, 600 and 700oC, respectively. Pixel-by-pixel composition and structural mapping was performed by micro-beam X-ray at synchrotron light source. Diffraction images were recorded at a rate of 1 pattern/s. The XRD patterns were automatically processed, phase-identified and categorized by hierarchical clustering algorithm to construct the composition-phase map. Furthermore, the resulting maps are consistent with corresponding isothermal sections reported in the ASM Alloy Phase Diagram DatabaseTM, verifying the effectiveness of the present approach in phase diagram construction.

36 MATERIALS SCIENCE↗

Adsorption Hysteresis Under Control: Tuning Host–Guest Interactions via a Genetic Algorithm

Mesoporous adsorbent materials offer a large volumetric capacity; however, cyclic adsorption/desorption processes in these systems often suffer from hysteresis and may require a significant pressure swing to access this capacity. To mitigate hysteresis, a proposed strategy is to include nucleation sites on the walls of the mesoporous material to facilitate droplet and bubble formation, lowering the free energy barriers to the respective phase transitions. It is unclear, however, what combination of adsorbate− adsorbent interactions and spatial patterning would be beneficial for a given application, considering that improvements to some sorption properties may come at the expense of other attributes. To understand these interconnected observables, we examine two model systems, planar-slit and cylindrical pores with tunable interaction sites, using GPU-accelerated transition matrix Monte Carlo simulations. The simulations provide a free energy map of the pressure−adsorption space in a matter of minutes, which we use to track adsorption isotherm characteristics as a function of adsorbent properties. We then leverage the rapid acquisition of simulation data to construct a genetic algorithm to iteratively modify interaction sites of the slit-pore wall to minimize the hysteresis of this system without sacrificing uptake. We find that the adsorption branch of the isotherm is easily modulated via the average host−guest interaction strength, but desorption is only adjustable if there is a suitable bubble nucleation site. Within the context of a slit-pore system, we identify relative interaction strengths and patch sizes required to gain control over both branches of the hysteresis loop.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Intralayer Cation Ordering in a Brownmillerite Superstructure: Synthesis, Crystal, and Magnetic Structures of Ca2FeCoO5

The synthesis, crystal, and magnetic structures and the bulk magnetic properties of Ca2FeCoO5, a brownmillerite type oxide, are presented. The crystal structure, solved and refined from single crystal X-ray and powder neutron diffraction data, is described in Pbcm with cell parameters, a = 5.3652(3) , b = 11.0995(5) , c = 14.7982(7) . Thus, one axis, b in this setting, is doubled in comparison with the standard brownmillerite structure description giving rise to two sets of octahedral and tetrahedral sites. Aided by the strong scattering contrast between Fe and Co for neutrons, a nearly perfect intralayer cation site ordering, not observed for any brownmillerite before, is detected in the tetrahedral layers. There is a lesser degree of cation site ordering in the octahedral sites. Overall, the Fe/Co site ordering is of the NaCl type both within and between the tetrahedral and octahedral layers. There are also both intra- and interlayer ordering of tetrahedral chain orientations. The left- and right-handed orientations alternate within each tetrahedral layer as well as between the closest tetrahedral layers. The occurrence of the rare Pbcm space group in Ca2FeCoO5 is not consistent with a recently proposed structure-field map for brownmillerite oxides. The magnetic structure is G-type antiferromagnetic, with preferred orientation of magnetic moments parallel to the longest axis between 3.8 K to 100 K which switches to the shortest axis between 225 K and 550 K. The neutron diffraction data indicate different site specific ordering temperatures at about 450(5) K and 555(5) K. The refined ordered moments at 3.8 K are somewhat smaller than expected for Fe3+ and Co3+(high spin) but are similar to those found in Sr2FeCoO5. There is evidence for spin canting from isothermal magnetization data that shows well pronounced hystereses and remnant magnetizations at 5 K and 200 K.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

CO 2 Sorption to Subsingle Hydration Layer Montmorillonite Clay Studied by Excess Sorption and Neutron Diffraction Measurements

Geologic storage of CO 2 requires that the caprock sealing the storage rock is highly impermeable to CO 2 . Swelling clays, which are important components of caprocks, may interact with CO 2 leading to volume change and potentially impacting the seal quality. The interactions of supercritical (sc) CO 2 with Na saturated montmorillonite clay containing a subsingle layer of water in the interlayer region have been studied by sorption and neutron diffraction techniques. The excess sorption isotherms show maxima at bulk CO2 densities of ≈0.15 g/cm 3 , followed by an approximately linear decrease of excess sorption to zero and negative values with increasing CO 2 bulk density. Neutron diffraction experiments on the same clay sample measured interlayer spacing and composition. The results show that limited amounts of CO 2 are sorbed into the interlayer region, leading to depression of the interlayer peak intensity and an increase of the d(001) spacing by ca. 0.5 Å. The density of CO 2 in the clay pores is relatively stable over a wide range of CO 2 pressures at a given temperature, indicating the formation of a clay-CO 2 phase. Finally, at the excess sorption maximum, increasing CO 2 sorption with decreasing temperature is observed while the high-pressure sorption properties exhibit weak temperature dependence.

Rother, Gernot↗

Synthesis, Annealing and Performance of Pd-Au Asymmetric Composite Membranes for Hydrogen Purification

Composite asymmetric Pd-Au membranes, based on porous Inconel and Hastelloy tubular supports, were prepared by means of electroless deposition and galvanic displacement techniques and tested, before and after Au deposition, in pure H2 atmosphere. The final membranes, with Au average bulk composition up to 16.7 wt%, were 9–15 μm thick and showed, for the entire duration of characterization, H2/He ideal selectivity in excess of 900. The annealing of the as-prepared membranes was conducted through the coating and diffusion mechanism in He and H2 atmospheres at 500 °C. The annealing conditions were chosen after non-isothermal and isothermal HT-XRD studies on coupons synthetized with similar preparation methods. After the formation of the Pd-Au layer, the membranes showed steady flux and a stable Au gradient on the membrane top layer. Comparisons between permeance for Pd/Au and pure Pd membranes indicated that the membranes with an Au average bulk composition of 4.5 and 5.4 wt% had an enhancement, up to 20%, of the H2 permeability in the temperature range 250–450 °C with respect to pure Pd membranes. On the other hand, the membrane having the highest Au composition, 16.7 wt%, even though characterized by a lower H2 permeability (77% of pure Pd) had a rather high surface Au composition (approximately 46 wt%), which might provide good H2S poisoning tolerance.

electroless plating↗

Introduction of π-Complexation into Porous Aromatic Framework for Highly Selective Adsorption of Ethylene over Ethane

We report herein a strategy of incorporating air stable Ag(I) ions into water stable, high surface area porous organic polymer (POP) affording significant increase in ethylene uptake capacity and extremely high Qst for ethylene (over 100 kJ/mol at low ethylene load-ing) as illustrated in the context of Ag(I) ion functionalized PAF-1, PAF-1-SO3Ag. IAST calculations using single-component-isotherm data and equimolar ethylene/ethane ratio at 296 K reveal PAF-1-SO3Ag shows exceptionally high ethylene/ethane adsorption selectivi-ty (Sads: 27 to 125), far surpassing benchmark zeolite and any other MOF reported in literature. This alongside excellent water/air stability, high ethylene uptake capacity, and mild regeneration requirements make PAF-1-SO3Ag hold promise for adsorption-based eth-ylene/ethane separations, paving a way to develop Ag(I) ion function-alized POPs as a new platform for highly selective adsorption of eth-ylene over ethane.

Li, Baiyan↗

Strong CO{sub 2} binding in a water-stable, triazolate-bridged metal-organic framework functionalized with ethylenediamine

Reaction of CuCl{sub 2}{center_dot}2H{sub 2}O with 1,3,5-tris(1H-1,2,3-triazol-5-yl)benzene (H{sub 3}BTTri) in DMF at 100{sup o}C generates the metal-organic framework H{sub 3}((Cu{sub 4}Cl){sub 3}(BTTri){sub 8}(DMF){sub 12}){center_dot}7DMF {center_dot} 76H{sub 2}O(1-DMF). The sodalite-type structure of the framework consists of BTTri{sup 3-}-linked (Cu{sub 4}Cl){sup 7+} square clusters in which each Cu-II center has a terminal DMF Ligand directed toward the interior of a large pore. The framework exhibits a high thermal stability of up to 270{sup o}C, as well as exceptional chemical stability in air, boiling water, and acidic media. Following exchange of the guest solvent and bound DMF molecules for methanol to give 1-MeOH, complete desolvation of the framework at 180 degrees C generated H{sub 3}(Cu{sub 4}Cl{sub 3}(BTTri){sub 8}) (1) with exposed Cu-II sites on its surface. Following a previously reported protocol, ethylenediamine molecules were grafted onto these sites to afford 1-en, featuring terminal alkylamine groups. The N{sub 2} adsorption isotherms indicate a reduction in the BET surface area from 1770 to 345 m{sup 2}/g following grafting. The H{sub 2} adsorption data at 77 K for 1 indicate a fully reversible uptake of 1.2 wt % at 1.2 bar, while the CO{sub 2} isotherm at 195 K shows a maximal uptake of 90 wt % at 1 bar. Compared to 1, the alkylamine-functionalized framework I-en exhibits a higher uptake of CO{sub 2} at 298 K and pressures up to ca. 0.1 bar, as well as a higher CO{sub 2}/N{sub 2} selectivity at all measured pressures. Significantly, 1-en also exhibits an isosteric heat of CO{sub 2} adsorption of 90 kJ/mol, which is much higher than the 21 kJ/mol observed for 1. This chemisorption interaction is the strongest reported to date for a metal-organic framework and points toward the potential utility of alkylamine-appended frameworks for the postcombustion capture of CO{sub 2} from low-pressure flue gas streams.

01 COAL, LIGNITE, AND PEAT↗

Carbon Dioxide Capture Chemistry of Amino Acid Functionalized Metal-Organic Frameworks in Humid Flue Gas

Here, metal-organic framework-808 has been functionalized with 11 amino acids (AA) to produce a series of MOF-808-AA structures. The adsorption of CO 2 under flue gas conditions revealed that glycine- and DL-lysine-functionalized MOF-808 (MOF-808-Gly and -DL-Lys) have the highest uptake capacities. Enhanced CO 2 capture performance in the presence of water was observed and studied using single-component sorption isotherms, CO 2 /H 2 O binary isotherm, and dynamic breakthrough measurements. The key to the favorable performance was uncovered by deciphering the mechanism of CO 2 capture in the pores and attributed to the formation of bicarbonate as evidenced by 13 C and 15 N solid-state nuclear magnetic resonance spectroscopy studies. Based on these results, we examined the performance of MOF-808-Gly in simulated coal flue gas conditions and found that it is possible to capture and release CO 2 by vacuum swing adsorption. MOF-808-Gly was cycled at least 80 times with full retention of performance. This study significantly advances our understanding of CO 2 chemistry in MOFs by revealing how strongly bound amine moieties to the MOF backbone create the chemistry and environment within the pores, leading to the binding and release of CO 2 under mild conditions without application of heat.

20 FOSSIL-FUELED POWER PLANTS↗

Critical Factors Driving the High Volumetric Uptake of Methane in Cu 3 (btc) 2

We report a thorough experimental and computational study has been carried out to elucidate the mechanistic reasons for the high volumetric uptake of methane in the metal–organic framework Cu 3 (btc) 2 (btc 3– = 1,3,5-benzenetricarboxylate; HKUST-1). Methane adsorption data measured at several temperatures for Cu 3 (btc) 2 , and its isostructural analogue Cr 3 (btc) 2 , show that there is little difference in volumetric adsorption capacity when the metal center is changed. In situ neutron powder diffraction data obtained for both materials were used to locate four CD 4 adsorption sites that fill sequentially. This data unequivocally shows that primary adsorption sites around, and within, the small octahedral cage in the structure are favored over the exposed Cu 2+ or Cr 2+ cations. These results are supported by an exhaustive parallel computational study, and contradict results recently reported using a time-resolved diffraction structure envelope (TRDSE) method. Moreover, the computational study reveals that strong methane binding at the open metal sites is largely due to methane–methane interactions with adjacent molecules adsorbed at the primary sites instead of an electronic interaction with the metal center. Simulated methane adsorption isotherms for Cu 3 (btc) 2 are shown to exhibit excellent agreement with experimental isotherms, allowing for additional simulations that show that modifications to the metal center, ligand, or even tuning the overall binding enthalpy would not improve the working capacity for methane storage over that measured for Cu 3 (btc) 2 itself.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Decomposition Pathway of Ammonia Borane on the Surface of nano-BN

Ammonia borane (AB) is under significant investigation as a possible hydrogen storage material. While many chemical additives have been demonstrated to have a significant positive effect on hydrogen release from ammonia borane, many provide additional complications in the regeneration cycle. Mechanically alloyed hexagonal BN (nano-BN) has been shown to facilitate the release of hydrogen from AB at lower temperature, with minimal induction time, less exothermically, and inert nano-BN may be easily removed during any regeneration of the spent AB. The samples were prepared by mechanically alloying AB with nano-BN. Raman spectroscopy indicates that the AB:nano-BN samples are physical mixtures of AB and h-BN. The release of hydrogen from AB:nano-BN mixtures as well as the decomposition products were characterized by 11 B magic angle spinning (MAS) solid state NMR, TGA/DSC/MS with 15 N labeled AB, and solution 11 B NMR spectroscopy. The 11 B MAS solid state NMR spectrum shows that diammonate of diborane (DADB) is present in the mechanically alloyed mixture, which drastically shortens the induction period for hydrogen release from AB. Analysis of the TGA/DSC/MS spectra using 15 N labeled AB shows that all the borazine (BZ) produced in the reaction comes from AB and that increasing nano-BN surface area results in increased amounts of BZ. However, under high temperature, 150°C, isothermal conditions, the amount of BZ released was the same as for neat AB. High resolution transmission electron microscopy (HRTEM), selected area diffraction (SAD), and electron energy loss spectroscopy (EELS) of the initial and final nano-BN additive provide evidence for crystallinity loss but not significant chemical changes. The higher concentration of BZ observed for low temperature dehydrogenation of AB:nano-BN mixtures versus neat AB is attributed to a surface interaction that favors the formation of precursors which ultimately result in BZ. This pathway can be avoided through isothermal heating at temperatures >150°C.

08 HYDROGEN↗

Combining X-ray Absorption and X-ray Diffraction Techniques for in Situ Studies of Chemical Transformations in Heterogeneous Catalysis:Advantages and Limitations

Recent advances in catalysis instrumentations include synchrotron-based facilities where time-resolved X-ray scattering and absorption techniques are combined in the same in situ or operando experiment to study catalysts at work. To evaluate the advances and limitations of this method, we performed a series of experiments at the new XAFS/XRD instrument in the National Synchrotron Light Source. Nearly simultaneous X-ray diffraction (XRD) and X-ray absorption fine-structure (XAFS) measurements of structure and kinetics of several catalysts under reducing or oxidizing conditions have been performed and carefully analyzed. For CuFe{sub 2}O{sub 4} under reducing conditions, the combined use of the two techniques allowed us to obtain accurate data on kinetics of nucleation and growth of metallic Cu. For the inverse catalyst CuO/CeO{sub 2} that underwent isothermal reduction (with CO) and oxidation (with O{sub 2}), the XAFS data measured in the same experiment with XRD revealed strongly disordered Cu species that went undetected by diffraction. These and other examples emphasize the unique sensitivity of these two complementary methods to follow catalytic processes in the broad ranges of length and time scales.

43 PARTICLE ACCELERATORS↗

Nonfunctionalized Polydimethyl Siloxane Superhydrophobic Surfaces Based on Hydrophobic$-$Hydrophilic Interactions

Superhydrophobic surfaces based on polydimethyl siloxane (PDMS) were fabricated using a 50:50 PDMS$-$poly(ethylene glycol) (PEG) blend. PDMS was mixed with PEG, and incomplete phase separation yielded a hierarchic structure. The phase-separated mixture was annealed at a temperature close to the crystallization temperature of the PEG. The PEG crystals were formed isothermally at the PDMS/PEG interface, leading to an engineered surface with PDMS spherulites. Here, the resulting roughness of the surface was studied by scanning electron microscopy (SEM) and atomic force microscopy (AFM). The PDMS spherulites, a few micrometers in diameter observed from SEM images, were found to have an undulated (rippled) surface with nanometer-sized features. The combination of micrometer- and nanometer-sized surface features created a fractal surface and increased the water contact angle (WCA) of PDMS more than 60°, resulting in a superhydrophobic PDMS surface with WCA of >160°. The active surface layer for the superhydrophobicity was approximately 100 μm thick, illustrating that the material had bulk superhydrophobicity compared to conventional fluorocarbon or fluorinated coated rough surfaces. Theoretical analysis of the fractal surface indicates that the constructed surface has a fractal dimension of 2.5, which corresponds to the Apollonian sphere packing.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗