Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “INTERFEROMETER SYSTEM”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,297 records · Page 72

Improved Ozone Analyses Using Direct Assimilation of 9.6μm Radiances from Hyperspectral Sounders

Previously, hyperspectral sounder brightness temperatures assimilated in the Goddard Earth Observing System Atmospheric Data Assimilation System (GEOS-ADAS) were limited to assimilating temperature and moisture. The ozone sensitive 9.6 m region is sensed by several hyperspectral sounders including AIRS (Atmospheric InfraRed Sounder), IASI (Infrared Atmospheric Sounding Interferometer), and CrIS (Cross-track Infrared Sounder). Direct assimilation of brightness temperatures in the 9.6 m region have been operational at ECMWF for several years (Dragani and McNally, 2013; Eresmaa et al., 2017). With this study, similar improvements using the GEOS-ADAS are presented. Channels were selected from available operational subsets evaluating information content and minimizing inter-channel correlation. Additionally, information such as channel selections made by other studies, and vertical sensitivities of ozone and temperature were considered. The analyses produced show improvements verified against ozonesondes taken from SHADOZ (Southern Hemisphere Additional Ozonesondes), and WOUDC (World Ozone and Ultraviolet Data Center). While care was taken to minimize inter-channel correlation through channel selection, a key feature available in the GEOS-ADAS is the ability to account for correlated error. The importance of inter-channel correlated error is highlighted by performing assimilation experiments with and without inter-channel correlation in the GEOS-ADAS. It is anticipated that inclusion of these ozone sensitive channels will be used to improve NASA GMAO products in the near future.

Karpowicz, Bryan M.↗

Control of dual phase tuners

Techniques that facilitate control of dual phase tuners are provided. In one example, a system includes a first phase tuner and a second phase tuner. The first phase tuner is driven to a first phase bias that is different than a desired phase bias for an interferometer. The second phase tuner is driven to a second phase bias. A combination of the first phase bias and the second phase bias corresponds to the desired phase bias.

Lee, Benjamin Giles↗

Plasma Diagnostics of a Capillary Plasma Channel for Laser Guiding

We demonstrated the production of an optical waveguide in a capillary discharge-produced plasma using a cylindrical capillary. Plasma parameters of its waveguide were characterized by use of both a Normarski laser interferometer and a hydrogen plasma line spectrum. A space-averaged maximum temperature of 3.3 eV with electron densities of the order of 10{sup 17} cm{sup -3} was observed at a discharge time of 150 ns and a maximum discharge current of 200 A. An ultrashort, intense laser pulse was guided by use of this plasma channel.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

INTERFEROMETRIC OBSERVATIONS OF THE HIERARCHICAL TRIPLE SYSTEM ALGOL

Algol is a triple stellar system consisting of a close semidetached binary orbited by a third object. Due to the disputed spatial orientation of the close pair, the third body perturbation of this pair is a subject of much research. In this study, we determine the spatial orientation of the close pair orbital plane using the CHARA Array, a six-element optical/IR interferometer located on Mount Wilson, and state-of-the-art e-EVN interferometric techniques. We find that the longitude of the line of nodes for the close pair is OMEGA{sub 1} = 48 deg. +- 2 deg. and the mutual inclination of the orbital planes of the close and the wide pairs is 95 deg. +- 3 deg. This latter value differs by 5{sup 0} from the formerly known 100 deg., which would imply a very fast inclination variation of the system, not borne out by the photometric observations. We also investigated the dynamics of the system with numerical integration of the equations of motions using our result as an initial condition. We found large variations in the inclination of the close pair (its amplitude approx170{sup 0}) with a period of about 20 millennia. This result is in good agreement with the photometrically observed change of amplitude in Algol's primary minimum.

79 ASTRONOMY AND ASTROPHYSICS↗

Fiber-Optic Magnetic-Field-Strength Measurement System for Lightning Detection

A fiber-optic sensor system is designed to measure magnetic fields associated with a lightning stroke. Field vector magnitudes are detected and processed for multiple locations. Since physical limitations prevent the sensor elements from being located in close proximity to highly conductive materials such as aluminum, the copper wire sensor elements (3) are located inside a 4-cubic-in. (.66-cubic-cm) plastic housing sensor head and connected to a fiber-optic conversion module by shielded cabling, which is limited to the shortest length feasible. The signal path between the conversion module and the avionics unit which processes the signals are fiber optic, providing enhanced immunity from electromagnetic radiation incident in the vicinity of the measurements. The sensors are passive, lightweight, and much smaller than commercial B-dot sensors in the configuration which measures a three-dimensional magnetic field. The system is expandable, and provides a standard-format output signal for downstream processing. Inside of the sensor head, three small search coils, each having a few turns on a circular form, are mounted orthogonally inside the non-metallic housing. The fiber-optic conversion module comprises three interferometers, one for each search coil. Each interferometer has a high bandwidth optical phase modulator that impresses the signal received from its search coil onto its output. The output of each interferometer travels by fiber optic cable to the avionics unit, and the search coil signal is recovered by an optical phase demodulator. The output of each demodulator is fed to an analog-to-digital converter, whose sampling rate is determined by the maximum expected rate of rise and peak signal magnitude. The output of the digital processor is a faithful reproduction of the coil response to the incident magnetic field. This information is provided in a standard output format on a 50-ohm port that can be connected to any number of data collection and processing instruments and/or systems. The measurement of magnetic fields using fiber-optic signal processing is novel because it eliminates limitations of a traditional B-dot system. These limitations include the distance from the sensor to the measurement device, the potential for the signal to degrade or be corrupted by EMI from lightning, and the size and weight of the sensor and associated plate.

Gurecki, Jay↗

Development of a GPU-based high-performance radiative transfer model for the Infrared Atmospheric Sounding Interferometer (IASI)

Satellite-observed radiance is a nonlinear functional of surface properties and atmospheric temperature and absorbing gas profiles as described by the radiative transfer equation (RTE). In the era of hyperspectral sounders with thousands of high-resolution channels, the computation of the radiative transfer model becomes more time-consuming. The radiative transfer model performance in operational numerical weather prediction systems still limits the number of channels we can use in hyperspectral sounders to only a few hundreds. To take the full advantage of such high-resolution infrared observations, a computationally efficient radiative transfer model is needed to facilitate satellite data assimilation. In recent years the programmable commodity graphics processing unit (GPU) has evolved into a highly parallel, multi-threaded, many-core processor with tremendous computational speed and very high memory bandwidth. The radiative transfer model is very suitable for the GPU implementation to take advantage of the hardware's efficiency and parallelism where radiances of many channels can be calculated in parallel in GPUs. In this paper, we develop a GPU-based high-performance radiative transfer model for the Infrared Atmospheric Sounding Interferometer (IASI) launched in 2006 onboard the first European meteorological polar-orbiting satellites, METOP-A. Each IASI spectrum has 8461 spectral channels. The IASI radiative transfer model consists of three modules. The first module for computing the regression predictors takes less than 0.004% of CPU time, while the second module for transmittance computation and the third module for radiance computation take approximately 92.5% and 7.5%, respectively. Our GPU-based IASI radiative transfer model is developed to run on a low-cost personal supercomputer with four GPUs with total 960 compute cores, delivering near 4 TFlops theoretical peak performance. By massively parallelizing the second and third modules, we reached 364x speedup for 1 GPU and 1455x speedup for all 4 GPUs, both with respect to the original CPU-based single-threaded Fortran code with the -O{sub 2} compiling optimization. The significant 1455x speedup using a computer with four GPUs means that the proposed GPU-based high-performance forward model is able to compute one day's amount of 1,296,000 IASI spectra within nearly 10 min, whereas the original single CPU-based version will impractically take more than 10 days. This model runs over 80% of the theoretical memory bandwidth with asynchronous data transfer. A novel CPU-GPU pipeline implementation of the IASI radiative transfer model is proposed. The GPU-based high-performance IASI radiative transfer model is suitable for the assimilation of the IASI radiance observations into the operational numerical weather forecast model.

97 MATHEMATICS AND COMPUTING↗

A COMPREHENSIVE STUDY OF CLOSE DOUBLE WHITE DWARFS AS GRAVITATIONAL WAVE SOURCES: EVOLUTIONARY CHANNELS, BIRTH RATES, AND PHYSICAL PROPERTIES

Close double white dwarfs (CDWDs) are believed to dominate the Galactic gravitational wave (GW) radiation in the frequency range 10{sup -4} to 0.1 Hz, which will be detected by the Laser Interferometer Space Antenna (LISA) detector. The aim of this detector is to detect GW radiation from astrophysical sources in the universe and to help improve our understanding of the origin of the sources and their physical properties (masses and orbital periods). In this paper, we study the probable candidate sources in the Galaxy for the LISA detector: CDWDs. We use the binary population synthesis approach of CDWDs together with the latest findings of the synthesis models from Han, who proposed three evolutionary channels: (1) stable Roche lobe overflow plus common envelope (RLOF+CE), (2) CE+CE, and (3) exposed core plus CE. As a result, we systematically investigate the detailed physical properties (the distributions of masses, orbital periods, and chirp masses) of the CDWD sources for the LISA detector, examine the importance of the three evolutionary channels for the formation of CDWDs, and carry out Monte Carlo simulations. Our results show that RLOF+CE and CE+CE are the main evolutionary scenarios leading to the formation of CDWDs. For the LISA detectable sources, we also explore and discuss the importance of these three evolutionary channels. Using the calculated birth rate, we compare our results to the LISA sensitivity curve and the foreground noise floor of CDWDs. We find that our estimate for the number of CDWD sources that can be detected by the LISA detector is greater than 10,000. We also find that the detectable CDWDs are produced via the CE+CE channel and we analyze the fraction of the detectable CDWDs that are double helium (He+He), or carbon-oxygen plus helium (CO+He) WD binary systems.

79 ASTRONOMY AND ASTROPHYSICS↗

Investigation of Calibrating Force Transducer Using Sinusoidal Force

Sinusoidal force calibration method was studied several years before at Physikalisch-Technische Bundesanstalt (PTB). A similar dynamic force calibration system is developed at Changcheng Institute of Metrology and Measurement (CIMM). It uses electro-dynamic shakers to generate dynamic force in the range from 1 N to 20 kN, and heterodyne laser interferometers are used for acceleration measurement. The force transducer to be calibrated is mounted on the shaker, and a mass block is screwed on the top of force transducer, the sinusoidal forces realized by accelerated load masses are traceable to acceleration and mass according to the force definition. The methods of determining Spatial-dependent acceleration on mass block and measuring the end mass of force transducer in dynamic force calibration are discussed in this paper.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Complementarity and entanglement in bipartite qudit systems

We consider complementarity in a bipartite quantum system of arbitrary dimensions. Single-partite and bipartite properties turn out as mutually exclusive quantities. The single-partite properties can be related to a generalized predictability and visibility which compose two complementary realities for themselves. These properties combined become mutually exclusive to the genuine quantum mechanical bipartite correlations of the system which can be quantified with the generalized I concurrence that defines a proper entanglement measure. Consequently, the complementary relation quantifies entanglement in the bipartite system. The concept of complementarity determines entanglement as a property which mutually excludes any single-partite reality. As an application, we provide a proper definition of distinguishability in an n-port interferometer.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Experimental upper limit on the estimated thermal noise at low frequencies in a gravitational wave detector

The mirror relative motion of a suspended Fabry-Perot cavity is studied in the frequency range 3-100 Hz. The experimental measurements presented in this paper have been performed at the Low Frequency Facility, a high finesse optical cavity 1 cm long suspended to a mechanical seismic isolation system like the one of the VIRGO gravitational wave antenna. Because of the radiation pressure between the two mirrors of the cavity, the dynamic behavior of the system is characterized by the optical spring stiffness. In the frequency region above 3 Hz, where seismic noise contamination is negligible, the mirror displacement noise is stationary and its statistical distribution is Gaussian. Using a simplified mechanical model of the suspended system and applying the fluctuation dissipation theorem, we show that the measured power spectrum is reproduced in the frequency region 3-90 Hz. Since the contribution coming from different sources of the system to the total noise budget turns out to be negligible, we conclude that the relative displacement power spectrum of this opto-mechanical system is compatible with a system at thermal equilibrium within its environment. In the region 3-10 Hz this measurement gives so far the best upper limit for the thermal noise of the suspension for a gravitational wave interferometer.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Lifetime-resolved photon-correlation Fourier spectroscopy

The excited state population of single solid-state emitters is subjected to energy fluctuations around the equilibrium driven by the bath and relaxation through the emission of phonons or photons. Simultaneous measurement of the associated spectral dynamics requires a technique with a high spectral and temporal resolution with an additionally high temporal dynamic range. We propose a pulsed excitation-laser analog of photon-correlation Fourier spectroscopy (PCFS), which extracts the linewidth and spectral diffusion dynamics along the emission lifetime trajectory of the emitter, effectively discriminating spectral dynamics from relaxation and bath fluctuations . This lifetime-resolved PCFS correlates photon-pairs at the output arm of a Michelson interferometer in both their time-delay between laser-excitation and photon-detection T and the time-delay between two photons τ . We propose the utility of the technique for systems with changing relative contributions to the emission from multiple states, for example, quantum emitters exhibiting phonon-mediated exchange between different fine-structure states.

36 MATERIALS SCIENCE↗

The Hat Creek millimeter-wave interferometer.

A fixed-baseline millimeter-wave interferometer, operating initially at 13.5 mm, has been put into operation at the Hat Creek Observatory as the first step in the development of a two-element aperture synthesis telescope. The first system consists of a 3-m antenna and a 6-m antenna spaced 265 m apart. Large receiver bandwidths may be used at high frequencies, and this system employs an intermediate frequency bandwidth of about 400 MHz. The instrument has been used to derive accurate absolute positions of interstellar water vapor sources, to study Mercury, Venus, and Mars, and to make crude maps of a few complex continuum sources. The synthesis telescope, the next stage, has two 6-m antennas which can be located at various stations on a T-shaped track. The east-west leg is 300 m and the north-south leg is 200 m, permitting full synthesis for sources on the equator and at declinations as low as -30 deg as well as at high declinations.

Hills, R. E.↗

Structural alignment sensor

Comparative Michelson interferometers are discussed as well as the operating range potential of a structural alignment sensor (SAS) which requires only one laser mode. Schematics are presented for the distance measurement logic, the basic SAS system, the SAS optical layout, the coarse measurement signal processor, and the measured range resolution.

Davis, L.↗

Deep Fabry-Perot imaging of NGC 6240: Kinematic evidence for merging galaxies

The authors have observed the superluminous, infrared galaxy NGC 6240 (z = 0.025) at H alpha with the Hawaii Imaging Fabry-Perot Interferometer (HIFI - Bland and Tully 1989). During the past decade, observational evidence from all wavebands indicates that the unusual appearance of NGC 6240 has resulted from a collision between two gas-rich systems, a view which is supported by our spectrophotometric data. However, the origin of the enormous infrared luminosity (4 times 10(exp 11) solar luminosity) detected by the Infrared Astronomy Satellite (IRAS) remains highly controversial, where opinions differ on the relative roles of large-scale shocks, massive star formation or a buried 'active' nucleus. These mechanisms are discussed in the light of the author's Fabry-Perot observations.

Hawthorn, J. Bland↗

Cirrus cloud characteristics derived from volume imaging lidar, high spectral resolution lidar, HIS radiometer, and satellite

Preliminary measurement results are presented from the Cirrus Remote Sensing Pilot Experiment which used a unique suite of instruments to simultaneously retrieve cirrus cloud visible and IR optical properties, while addressing the disparities between satellite volume averages and local point measurements. The experiment employed a ground-based high resolution interferometer sounder (HIS) and a second Fourier transform spectrometer to measure the spectral radiance in the 4-20 micron band, a correlated high spectral resolution lidar, a volume imaging lidar, a CLASS radiosonde system, the Scripps Whole Sky Imager, and multispectral VAS, HIRS, and AVHRR satellite data from polar orbiting and geostationary satellites. Data acquired during the month long experiment included continuous daytime monitoring with the Whole Sky Imager.

Grund, Christian J.↗

The LISA Integrated Model

The Laser Interferometer Space Antenna (LISA) space mission has unique needs that argue for an aggressive modeling effort. These models ultimately need to forecast and interrelate the behavior of the science input, structure, optics, control systems, and many other factors that affect the performance of the flight hardware. In addition, many components of these integrated models will also be used separately for the evaluation and investigation of design choices, technology development and integration and test. This article presents an overview of the LISA integrated modeling effort.

Merkowitz, Stephen M.↗

NASA's Terrestrial Planet Finder Missions

NASA has decided to move forward with two complementary Terrestrial Planet Finder (TPF) missions, a visible coronagraph and an infrared formation flying interferometer. These missions are major missions in the NASA Office of Space Science Origins Theme. The primary science objectives of the TPF missions are to search for, detect, and characterize planets and planetary systems beyond our own Solar System, including specifically Earth-like planets.

Terrestrial Planet Finder (TPF)↗

Geophysical Information from Advanced Sounder Infrared Spectral Radiance

Advanced satellite sensors are tasked with improving global observations of the Earth's atmosphere, clouds, and surface to enable enhancements in weather prediction, climate monitoring capability, and environmental change detection. Satisfying this type of improvement for inferred geophysical information from these observations requires optimal usage of data from current systems as well as enhancements to future sensors. This presentation addresses the information content present in infrared spectral radiance from advanced atmospheric sounders with an emphasis on knowledge of thermodynamic state and trace species. Results of trade-off studies conducted to evaluate the impact of spectral resolution, spectral coverage, instrument noise, and a priori knowledge on remote sensing system information content will be discussed. A focus is placed on information achievable from the Atmospheric InfraRed Sounder (AIRS) on the NASA EOS Aqua satellite in orbit since 2002, the Infrared Atmospheric Sounding Interferometer (IASI) aboard MetOp-A since 2006, and the Cross-track Infrared Sounder (CrIS) instrument aboard the NPP and JPSS series of satellites which began 28 October 2011.

Larar, Allen M.↗