Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “INDIUM”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,297 records · Page 72

Commercialization of High Efficiency Low Cost CIGS Technology Based on Electroplating: Final Technical Progress Report, 28 September 2007 - 30 June 2009

This report describes SoloPower's work as a Photovoltaic Technology Incubator awardee within the U.S. Department of Energy's Solar Energy Technologies Program. The term of this subcontract with the National Renewable Energy Laboratory was two years. The project focused on SoloPower's electrodeposition-based copper indium gallium (di)selenide (CIGS) technology. Under this subcontract, SoloPowerimproved the quality of its flexible metal substrates, increased the size of its solar cells from 0.5 cm2 to 120 cm2, increased the small-area cell efficiencies from near 11% to near 14%, demonstrated large-area cells, and developed a module manufacturing process.

14 SOLAR ENERGY↗

Overview and Challenges of Thin Film Solar Electric Technologies

In this paper, we report on the significant progress made worldwide by thin-film solar cells, namely, amorphous silicon (a-Si), cadmium telluride (CdTe), and copper indium gallium diselenide (CIGS). Thin-film photovoltaic (PV) technology status is also discussed in detail. In addition, R&D and technology challenges in all three areas are elucidated. The worldwide estimated projection for thin-film PV technology production capacity announcements are estimated at more than 5000 MW by 2010.

14 SOLAR ENERGY↗

Millivolt Modulation of Plasmonic Metasurface Optical Response via Ionic Conductance

A plasmonic metasurface with an electrically tunable optical response that operates at strikingly low modulation voltages is experimentally demonstrated. The fabricated metasurface shows up to 30% relative change in reflectance in the visible spectral range upon application of 5 mV and 78% absolute change in reflectance upon application of 100 mV of bias. The designed metasurface consists of nanostructured silver and indium tin oxide (ITO) electrodes which are separated by 5 nm thick alumina. The millivolt-scale optical modulation is attributed to a new modulation mechanism, in which transport of silver ions through alumina dielectric leads to bias-induced nucleation and growth of silver nanoparticles in the ITO counter-electrode, altering the optical extinction response. This transport mechanism, which occurs at applied electric fields of 1 mV nm -1 , provides a new approach to use of ionic transport for electrical control over light–matter interactions.

36 MATERIALS SCIENCE↗

Open‐Air Combustion Synthesis with Rapid Plasma Processing of Large‐Area Transparent Conducting Oxides

A vacuum-free, high-throughput synthesis of indium tin oxide (ITO) via Combustion Oxidation with Rapid Plasma Processing (CORP) utilizes a solution-based exothermic combustion reaction to generate the oxide with tunable control of either amorphous or crystalline phases. A subsequent open-air, forming gas plasma treatment is used to introduce oxygen vacancies and promote crystallization. Here, the evolution of the oxide structure is elucidated by extended X-ray absorption spectroscopy fine structure analysis. Using CORP, fabrication of 300 cm 2 of ITO possessing a champion sheet resistance of 38 Ω sq. −1 , visible transmission of 89%, conductivity stability for over 250 days, roughness < 2nm, and Haacke figure of merit (%T 550nm 10 /R s ) of 0.012 Ω −1 is achieved. Cost modeling of CORP demonstrates up to a 67% reduction in price for TCOs using fully continuous, in-line unit operations compared with vacuum sputtering. The work shows a path toward a low-cost, vacuum-free manufacturing method for TCOs at commercial scales.

42 ENGINEERING↗

Determinants of the Price of High-Tech Metals: An Event Study

The growing demand for high-tech products has resulted in strong growth in demand for certain minor metals. In combination with production concentrated in China, this caused strong and unpredicted price movements in recent years. As a result, manufacturing companies have to cope with additional risks. However, the detailed reasons for the price development are only partially understood. Therefore, we analyzed empirically which determinants can be assigned to price movements and performed an event study on the high-tech metals neodymium, indium, and gallium. Based on our dataset of news items, we were able to find coinciding events to almost 90% of all price jumps (recall). We showed that if any information about these events occurred with a probability of over 50% there would also be a price jump within 10 days (precision). However, the classical set of price determinants has to be extended for these specific markets, as we found unorthodox factors like holidays or weather that may be indicators for price movements. Therefore, we hope that our study supports industry for instance in performing more informed short-term planning of metals purchasing based on information about specific events.

29 ENERGY PLANNING, POLICY, AND ECONOMY↗

Ultra-compact low loss electro-optical nanobeam cavity modulator embedded photonic crystal

In this paper, a hybrid electro-optical modulator based on a one-dimensional photonic crystal nanobeam cavity is proposed. The main component of the cavity builder is the indium–tin–oxide that is a transparent conductive oxide. The proposed structure is used to minimize optical losses and also to have a high-quality factor with a tunability from the distributed feedback system. The proposed modulator has a wide range of resonant tunable in a footprint of 1.892 μm{sup 2}. This structure has the ability to shift the wavelength of 1.55 μm using a very small voltage 0.1 V. Simulation results show that the proposed structure has an insertion loss of 0.027 dB, extension ratio 3.484 dB, 119.89 GHz modulation speed, and 0.59 aJ/bit modulation energy. By comparing the proposed method parameters and other modulators based on the one-dimensional photonic crystal nanobeam cavity, a significant improvement in modulation voltage, insertion losses, energy consumption, and footprint have been observed.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Extraction of chloride acido complexes of triply charged metal cations in water–oxyethylated nonylphenol–salting-out agent systems

The characteristic features of extraction of chloride acido complexes of iron(III), thallium(III), indium, and gallium in water–oxyethylated nonylphenol (neonol AF-9-12)–salting-out agent systems are studied. The role of temperature, nature of the salting-out agent, and its salting-out ability is shown.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Regularities of salting-out and metal ion extraction by synergistic mixtures of potassium bis(alkylpolyoxyethylene)phosphate and alkylbenzyldimethylammonium chloride under polythermic conditions

The regularities of salting-out of a ionic associate formed by anionic oxyethylated surfactant (potassium bis(alkylpolyoxyethylene)phosphate) and cationic surfactant (alkylbenzyldimethylammonium chloride) with inorganic salts were studied. The possibility of using the ionic associate for thallium(III) and indium extraction in the presence of sodium chloride as a saltingout agent at 60 °C was proved.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

The Concept of a Hybrid Pulsed Plasma Thruster for Small-Size Space Satellites

A concept of a hybrid plasma source to be used as a micro satellite thruster is proposed, where the propellant is a liquid gallium–indium alloy. The plasma source operates in two modes: 1) generation of laser ablation plasma and 2) generation of plasma in a laser-triggered, low-voltage vacuum-arc discharge. The cathode in the discharge cell of the source represents a stainless-steel capillary filled with the working liquid. The laser beam target is the working liquid meniscus. Without any voltage in the discharge gap, only laser-ablated plasma is generated. Upon application of even a relatively low voltage (<1 kV), the ablation initiates a high-current vacuum-arc discharge. In the experiments, the discharge current and voltage waveforms were recorded and so were the images of plasma glow obtained with a HSFC-Pro 4-channel high-speed camera. Regularities of current flow in the high-current vacuum-arc discharge, initiated by the cathode laser ablation, are investigated.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Assessment of Reproducibility of Laser Electrospray Mass Spectrometry using Electrospray Deposition of Analyte

A nonresonant, femtosecond (fs) laser is employed to desorb samples of Victoria blue deposited on stainless steel or indium tin oxide (ITO) slides using either electrospray deposition (ESD) or dried droplet deposition. The use of ESD resulted in uniform films of Victoria blue whereas the dried droplet method resulted in the formation of a ring pattern of the dye. Laser electrospray mass spectrometry (LEMS) measurements of the ESD-prepared films on either substrate were similar and revealed lower average relative standard deviations for measurements within-film (20.9%) and between-films (8.7%) in comparison to dried droplet (75.5% and 40.2%, respectively). The mass spectral response for ESD samples on both substrates was linear (R{sup 2} > 0.99), enabling quantitative measurements over the selected range of 7.0 × 10{sup −11} to 2.8 × 10{sup −9} mol, as opposed to the dried droplet samples where quantitation was not possible (R{sup 2} = 0.56). The limit of detection was measured to be 210 fmol. .

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

MOF-Transformed In 2 O 3-x @C Nanocorn Electrocatalyst for Efficient CO 2 Reduction to HCOOH

For electrochemical CO 2 reduction to HCOOH, an ongoing challenge is to design energy efficient electrocatalysts that can deliver a high HCOOH current density (J HCOOH ) at a low overpotential. Indium oxide is good HCOOH production catalyst but with low conductivity. In this work, we report a unique corn design of In 2 O 3-x @C nanocatalyst, wherein In 2 O 3-x nanocube as the fine grains dispersed uniformly on the carbon nanorod cob, resulting in the enhanced conductivity. Excellent performance is achieved with 84% Faradaic efficiency (FE) and 11 mA cm –2 J HCOOH at a low potential of – 0.4 V versus RHE. At the current density of 100 mA cm –2 , the applied potential remained stable for more than 120 h with the FE above 90%. Density functional theory calculations reveal that the abundant oxygen vacancy in In 2 O 3-x has exposed more In 3+ sites with activated electroactivity, which facilitates the formation of HCOO* intermediate. Operando X-ray absorption spectroscopy also confirms In 3+ as the active site and the key intermediate of HCOO* during the process of CO 2 reduction to HCOOH.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Soft X-ray absorption spectra of aqueous salt solutions with highly charged cations in liquid microjets

X-ray absorption spectra of 1M aqueous solutions of indium (III) chloride, yttrium (III) bromide, lanthanum (III) chloride, tin (IV) chloride and chromium (III) chloride have been measured at the oxygen K-edge. Relatively minor changes are observed in the spectra compared to that of pure water. SnCl{sub 4} and CrCl{sub 3} exhibit a new onset feature which is attributed to formation of hydroxide or other complex molecules in the solution. At higher energy, only relatively minor, but salt-specific changes in the spectra occur. The small magnitude of the observed spectral changes is ascribed to offsetting perturbations by the cations and anions.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Locally Targeted Delivery of a Micron-Size Radiation Therapy Source Using Temperature-Sensitive Hydrogel

Purpose: To propose a novel radiation therapy (RT) delivery modality: locally targeted delivery of micron-size RT sources by using temperature-sensitive hydrogel (RT-GEL) as an injectable vehicle. Methods and Materials: Hydrogel is a water-like liquid at room temperature but gels at body temperature. Two US Food and Drug Administration-approved polymers were synthesized. Indium-111 (In-111) was used as the radioactive RT-GEL source. The release characteristics of In-111 from polymerized RT-GEL were evaluated. The injectability and efficacy of RT-GEL delivery to human breast tumor were tested using animal models with control datasets of RT-saline injection. As proof-of-concept studies, a total of 6 nude mice were tested by injecting 4 million tumor cells into their upper backs after a week of acclimatization. Three mice were injected with RT-GEL and 3 with RT-saline. Single-photon emission computed tomography (SPECT) and CT scans were performed on each mouse at 0, 24, and 48 h after injection. The efficacy of RT-GEL was determined by comparison with that of the control datasets by measuring kidney In-111 accumulation (mean nCi/cc), representing the distant diffusion of In-111. Results: RT-GEL was successfully injected into the tumor by using a 30-gauge needle. No difficulties due to polymerization of hydrogel during injection and intratumoral pressure were observed during RT-GEL injection. No back flow occurred for either RT-GEL or RT-saline. The residual tumor activities of In-111 were 49% at 24 h (44% at 48 h, respectively) for RT-GEL and 29% (22%, respectively) for RT-saline. Fused SPECT-CT images of RT-saline showed considerable kidney accumulation of In-111 (2886%, 261%, and 262% of RT-GEL at 0, 24, and 48 h, respectively). Conclusions: RT-GEL was successfully injected and showed much higher residual tumor activity: 170% (200%, respectively), than that of RT-saline at 24 h (48 h, respectively) after injection with a minimal accumulation of In-111 to the kidneys. Preliminary data of RT-GEL as a delivery modality of a radiation source to a local tumor are promising.

62 RADIOLOGY AND NUCLEAR MEDICINE↗

Novel Pt/Mg(In)(Al)O catalysts for ethane and propane dehydrogenation

Catalysts for the dehydrogenation of light alkanes were prepared by dispersing Pt on the surface of a calcined hydrotalcite-like support containing indium, Mg(In)(Al)O. Upon reduction in H{sub 2} at temperatures above 673 K, bimetallic particles of PtIn are observed by TEM, which have an average diameter of 1 nm. Analysis of Pt LIII-edge extended X-ray absorption fine structure (EXAFS) data shows that the In content of the bimetallic particles increases with increasing bulk In/Pt ratio and reduction temperature. Pt LIII-edge X-ray absorption near edge structure (XANES) indicates that an increasing donation of electronic charge from In to Pt occurs with increasing In content in the PtIn particles. The activity and selectivity of the Pt/Mg(In)(Al)O catalysts for ethane and propane dehydrogenation reactions are strongly dependent on the bulk In/Pt ratio. For both reactants, maximum activity was achieved for a bulk In/Pt ratio of 0.48, and at this In/Pt ratio, the selectivity to alkene was nearly 100%. Coke deposition was observed after catalyst use for either ethane or propane dehydrogenation, and it was observed that the alloying of Pt with In greatly reduced the amount of coke deposited. Characterization of the deposit by Raman spectroscopy indicates that the coke is present as highly disordered graphite particles <30 nm in diameter. While the amount of coke deposited during ethane and propane dehydrogenation are comparable, the effects on activity are dependent on reactant composition. Coke deposition had no effect on ethane dehydrogenation activity, but caused a loss in propane dehydrogenation activity. This difference is attributed to the greater ease with which coke produced on the surface of PtIn nanoparticles migrates to the support during ethane dehydrogenation versus propane dehydrogenation.

01 COAL, LIGNITE, AND PEAT↗

In-situ curvature monitoring and X-ray diffraction study of InGaAsP/InGaP quantum wells

The use of InGaAsP/InGaP quantum well structures is a promising approach for subcells in next generation multi-junction devices due to their tunable bandgap (1.50-1.80 eV) and for being aluminum-free. Despite these potentials, the accumulation of stress during the growth of these structures and high background doping in the quantum well region have previously limited the maximum number of quantum wells and barriers that can be included in the intrinsic region and the sub-bandgap external quantum efficiency to less than 30.0%. In this paper, we report on the use of in-situ curvature monitoring by multi-beam optical stress (MOS) sensor measurements during the growth of this quantum well structure to monitor the stress evolution in these thin films. A series of In 0.32 Ga 0.68 AsP/In 0.49 Ga 0.51 P quantum wells with various arsine to phosphine ratios have been analyzed by in-situ curvature monitoring and X-ray diffraction (XRD) to obtain nearly strain-free lattice matched structures. Sharp interfaces, as indicated by the XRD fringes, have been achieved by using triethyl-gallium and trimethyl-gallium as gallium precursors in InGaAsP and InGaP, respectively, with constant flows of trimethyl-indium and phosphine through the entire quantum well structure. The effect of the substrate miscut on quantum well growth was compared and analyzed using XRD, photoluminescence and time resolved photoluminescence. As a result, a 100 period quantum well device was successfully grown with minimal stress and approximately flat in-situ curvature.

14 SOLAR ENERGY↗

The new binary intermetallic YbGe{sub 2.83}

The new compound YbGe{sub 2.83} was obtained from the reaction of Yb and Ge in liquid indium. The crystal structure of YbGe{sub 2.83} adopts the trigonal, P3m1 space group with a=b=8.3657(12) A and c=7.0469(14) A. The structure of YbGe{sub 2.83} is a variant of the CaAl{sub 2}Si{sub 2} structure type with ordered vacancies. Germanium atoms form double layers of puckered hexagons creating slabs that sandwich the Yb atoms. YbGe{sub 2.83} can be classified as a Zintl compound with the formula Yb{sup (2+x)+}(Ge{sub 2.83}){sup (2+x)-}. The deficiencies at the Ge sites cause a mixed/intermediate valent state of ytterbium (Yb{sup 2.35+}). Valence bond sum calculations suggest an average valence of Yb ions in YbGe{sub 2.83} of 2.51 consistent with an intermediate valence compound. - Graphical abstract: The new binary compound YbGe{sub 2.83} is a variant of the CaAl{sub 2}Si{sub 2} structure type with ordered vacancies. Zintl formalism and valence bond sum calculations suggest intermediate valence of Yb ions in YbGe{sub 2.83}.

36 MATERIALS SCIENCE↗

Explorations of new selenites of the group IIIA and IVA metals

Systematic explorations of new phases in the Ga{sup III}/In{sup III}/Ge{sup IV}-Se{sup IV}-O systems by hydrothermal syntheses or solid-state reactions at high-temperature led to six new ternary compounds, namely, M{sub 2}Se{sub 2}O{sub 7} (M=Ga 1, In 2), M(OH)(SeO{sub 3}) (M=Ga 3, In 4), {alpha}-Ge(SeO{sub 3}){sub 2}5 and {beta}-Ge(SeO{sub 3}){sub 2}6. Ga{sub 2}Se{sub 2}O{sub 7}1 displays a 3D open framework composed of 2D gallium oxide layers being further bridged and capped by SeO{sub 3} groups. In{sub 2}Se{sub 2}O{sub 7}2 features a 3D indium oxide framework formed by corner- and edge- sharing InO{sub 6} octahedra with SeO{sub 3} groups attached on the cavities and the 8-member ring tunnels of the structure. The isostructural of M(OH)(SeO{sub 3}) (M=Ga 3, In 4) exhibit a 2D metal selenite layer composed of 1D edge-sharing MO{sub 6} octahedral chains that are interconnected by SeO{sub 3} groups. {alpha}-Ge(SeO{sub 3}){sub 2} (P2{sub 1}/n) 5 displays a 3D open framework with 1D 8-member ring tunnels along the a-axis while {beta}-Ge(SeO{sub 3}){sub 2} (Pa-3) 6 exhibits a condensed 3D network. - Graphical abstract: Highlights: Black-Right-Pointing-Pointer Up to now, selenites of the group IIIA and IVA metals are still rare. Black-Right-Pointing-Pointer Hydrothermal or solid state reactions yielded six new compounds in this system. Black-Right-Pointing-Pointer They are M{sub 2}Se{sub 2}O{sub 7} (M=Ga, In), M(OH)(SeO{sub 3}) (M=Ga, In), {alpha}-Ge(SeO{sub 3}){sub 2} and {beta}-Ge(SeO{sub 3}){sub 2}. Black-Right-Pointing-Pointer They exhibit four different 3D and one 2D structural types. Black-Right-Pointing-Pointer {alpha}-Ge(SeO{sub 3}){sub 2} and {beta}-Ge(SeO{sub 3}){sub 2} represent the first examples of germanium selenites.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Origin of the solid solution in the LiInSe{sub 2}–In{sub 2}Se{sub 3} system

Techniques of bulk and local analyses were used to characterize the melt-grown single crystals of LiInSe{sub 2}, where yellow matrix coexists together with extended red areas distributed irregularly. Bulk chemical analysis showed that the average stoichiometry of yellow matrix is close to ideal 1:1:2, but red areas are enriched with In{sub 2}Se{sub 3}. An excess In{sub 2}Se{sub 3} is incorporated coherently into the crystal lattice of LiInSe{sub 2}, forming the substitution solid solution with the general formula (Li{sub 1−3x}In{sub x}⎕{sub 2})InSe{sub 2} and changing the color from yellow to red. The test crystals with the 50–55% content of In{sub 2}Se{sub 3} were found by the X-ray analysis to be single phase. The differential dissolution technique, measuring the spatial variation of the composition with high resolution, demonstrated that the single phase crystals in the LiInSe{sub 2}–In{sub 2}Se{sub 3} system might be grown only in a very narrow range close to stoichiometric. Being supersaturated, the heterovalent solid solution phases decompose in the course of cooling, and the concentration micro-heterogeneity occurs in the matrix as the coherent (or incoherent) inclusions of two different types, practically pure selenides of lithium and indium. The origin and scale of the micro-heterogeneity determining the physical properties of LiInSe{sub 2} are discussed as a starting point for the development of physicochemical foundations for growing high quality optical crystals. - Graphical abstract: Differential dissolution technique applied for detection of dispersive precipitates in as-grown LiInSe{sub 2} single crystals: kinetic curves of the phase dissolution: F is the main phase Li{sub 0.96}In{sub 1.01}Se{sub 2} (98.9%), secondary minor phases Li{sub 2}Se (0.1%), In{sub 2}Se{sub 3} (0.9%). - Highlights: • Phase purity of crystals Li{sub 1−3x}In{sub 1+x}Se{sub 2} was examined by a new stoichiographic method. • Breakup of the metastable solid solution with temperature drop was detected. • Dispersive precipitates Li–Se and In–Se of low content result from the breakup. • A crucial role of the precipitates in optical properties of the crystals is shown. • Conditions are given how to grow stoichiometric and single-phase crystals.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗