Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “IMPURITY”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,297 records · Page 72

Physical mechanisms for the transition from type-III to large ELMs induced by impurity injection on EAST

Transition from type-III to large-amplitude ELMs induced by neon injection has been observed in the EAST tokamak at overlapping q 95 space between large and small ELMs. With neon injection, pedestal density gradient shows a remarkable increase accompanied by some decrease of pedestal electron temperature, and consequently the pressure gradient increases moderately and edge bootstrap current has minimal change. Further experiment demonstrates that the occurrence of large ELMs after neon injection is highly correlated with the change in edge density. Linear peeling-ballooning stability analysis indicates that the large ELM case is more unstable than the type-III ELM case during the ELM transition. A scan of pedestal density gradient in linear stability analysis shows that the direct destabilizing effect of steep pedestal density gradient on peeling-ballooning instabilities via two-fluid effects could also facilitate the transition to large ELMs. In conclusion, these results could provide more insight into the role of pedestal density gradient on pedestal stability and ELM behavior.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Effect of H + Exchange and Surface Impurities on Bulk and Interfacial Electrochemistry of Garnet Solid Electrolytes

Contact loss and current constriction pose significant challenges at the Li metal interface of solid-state batteries. For garnet-structured Li 7 La 3 Zr 2 O 12 (LLZO), these effects are amplified by Li + /H + exchange and surface contamination reactions, which lead to conductivity losses and poor Li wetting. In this study, we utilize a variety of surface treatment processes across 37 cells to selectively induce proton exchange and contamination reactions in LLZO. The resulting bulk and surface chemistry is systematically characterized and correlated to changes in electrochemical properties. Additionally, we combine impedance analysis and finite element method modeling to deconvolute sources of impedance contributions at the Li metal interface. Specifically, we show that constriction impedance at the Li metal interface arises not solely from voids, but also from ionically-resistive surface contaminants. Further, these findings emphasize the connection between ionic conductivity and constriction, demonstrating that micron-scale ionically-resistive components increase constriction even with identical contact geometries. Finally, we leverage our comprehensive dataset to highlight unstable overpotential growth as a failure mechanism, additionally showing that the phase of a cell’s impedance is a sensitive indicator for the onset of interfacial instability. Overall, this study clarifies the impacts of proton exchange and surface contamination on electrochemical properties at the Li|solid electrolyte interface and elucidates insights that are generalizable to other solid-state battery systems.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Toward a Machine Learning Approach to Interpreting X-ray Spectra of Trace Impurities by Converting XANES to EXAFS

The fact that the photoabsorption spectrum of a material contains information about the atomic structure, commonly understood in terms of multiple scattering theory, is the basis of the popular extended X-ray absorption spectroscopy (EXAFS) technique. How much of the same structural information is present in other complementary spectroscopic signals is not obvious. Here we use a machine learning approach to demonstrate that within theoretical models that accurately predict the EXAFS signal, the extended near-edge region does indeed contain the EXAFS-accessible structural information. We do this by exhibiting deep operator neural networks (DeepONets) that have learned the relationship between the extended and near edge portions of the X-ray absorption spectrum to predict the former from the latter. We find that we can accurately predict the EXAFS spectrum between 6 and 14 Å –1 from the first 6 Å –1 (≈100 eV) of the absorption spectrum of Cu 2 + substitutional defects in the Fe 3+ mineral hematite (α-Fe 2 O 3 ). This surprising finding implies that theoretical analyses of X-ray absorption spectra could be implemented that extract the same conclusions as high-quality EXAFS studies from spectra collected over a much smaller range of photon energies. This relaxes a host of experimental limitations related to the X-ray source and measurement sample, including collection time, minimum dopant concentration, source brilliance, and energy range. We describe the theoretical data sets and DeepONet construction and show that the resulting DeepONets produce EXAFS that recovers linear combination fits to experimental data with accuracy approaching the original ab initio calculations. We discuss the implications of our findings for minor constituent characterization and for understanding the information content of spectroscopic data more broadly, including how this approach might be applied to measured experimental spectra. In conclusion, to encourage similar efforts, the simulated X-ray spectra, machine learning, and fitting code are publicly available.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Effects of residual impurities in electroplated Cu on the Kirkendall void formation during soldering

Additions of bis-(sodium sulfopropyl)-disulfide (SPS) to the Cu electroplating bath strongly affected the characteristics of Kirkendall void formation when the Cu film is soldered with Sn-3.5Ag solder and subsequently aged. Voids were predominantly distributed near the Cu{sub 3}Sn/Cu interface with SPS, but randomly distributed in the Cu{sub 3}Sn layer without SPS. In situ Auger electron spectroscopy of voids at the Cu{sub 3}Sn/Cu interface revealed surface segregation of S atoms, which came from SPS put into the bath as an additive. The S segregation to Cu{sub 3}Sn/Cu interface lowers the interface energy, thereby accelerating the void nucleation. Assisted by the high surface diffusivity of Cu and the presence of excess vacancies arising from the Kirkendall effect, voids tend to localize at the interface, which would result in serious degradation of the joint reliability.

36 MATERIALS SCIENCE↗

O K-energy loss near-edge structure change induced by tantalum impurity in monoclinic hafnium oxide

The present paper reports the energy loss near-edge structure (ELNES) study of monoclinic HfO{sub 2} (m-HfO{sub 2}) and tantalum doped m-HfO{sub 2} (Ta{sub 0.1}Hf{sub 0.9}O{sub 2}) thin films prepared by radio frequency magnetron co-sputtering method. A change in the O K-ELNES spectra was observed as the amount of dopant increases. In order to precise the common features and the differences as a function of Ta defect nature (substitutional or interstitial) in HfO{sub 2}, the O K-ELNES were commented with respect to density functional theory calculations implemented in Vienna ab initio simulation package code. The calculated Ta doped HfO{sub 2} band structure showed that substitutional tantalum is the dominant defect and the spectral differences between doped and non-doped HfO{sub 2} are mainly originated from the change in the local cation distribution around the oxygen atoms.

36 MATERIALS SCIENCE↗

Decoupling single nanowire mobilities limited by surface scattering and bulk impurity scattering

We demonstrate the isolation of two free carrier scattering mechanisms as a function of radial band bending in InN nanowires via universal mobility analysis, where effective carrier mobility is measured as a function of effective electric field in a nanowire field-effect transistor. Our results show that Coulomb scattering limits effective mobility at most effective fields, while surface roughness scattering only limits mobility under very high internal electric fields. High-energy {alpha} particle irradiation is used to vary the ionized donor concentration, and the observed decrease in mobility and increase in donor concentration are compared to Hall effect results of high-quality InN thin films. Our results show that for nanowires with relatively high doping and large diameters, controlling Coulomb scattering from ionized dopants should be given precedence over surface engineering when seeking to maximize nanowire mobility.

36 MATERIALS SCIENCE↗

Measurement of excited states of Sb impurity in Si by traveling–wave method

The ground and excited states of Sb atom in Si, 1s (A{sub 1}), 1s (T{sub 2}), 1s (E), and 2p{sup 0}, were measured by using a traveling-wave method. The Sb-doped Si crystal with donor concentration of 2 × 10{sup 15} cm{sup −3} was placed the distance of 5 μm above a piezoelectric crystal in the fringe field of a surface acoustic wave. The free electrons excited from the bound states of the Sb atom are drifted by the traveling-wave, and thus lose their energy as the Joule heat through lattice and ion scattering processes. A strong temperature-dependent energy loss of the traveling-wave can be observed at temperatures below 200 K. The values of the bound states of the Sb atom can be characterized by using the Arrhenius plot for thermal activation process of the electrons in the bound states. The measurements were carried out at two frequencies of the traveling-wave, 50 MHz and 200 MHz. At the frequency of 50 MHz, the dielectric properties of the Si crystal are governed by dopant polarization but by electronic polarization at 200 MHz. We found that measurement accuracy of the bound states depends mainly on the electron mobility and the dielectric constant of the Si crystal, which are sensitive to the frequency and strength of the traveling-wave as well as electronic polarization properties of the Si crystal.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Single photon emission from impurity centers in AlGaAs epilayers on Ge and Si substrates

We show that the epitaxial growth of thin layers of AlGaAs on Ge and Si substrates allows to obtain single photon sources by exploiting the sparse and unintentional contamination with acceptors of the AlGaAs. Very bright and sharp single photoluminescence lines are observed in confocal microscopy. These lines behave very much as single excitons in quantum dots, but their implementation is by far much easier, since it does not require 3D nucleation. The photon antibunching is demonstrated by time resolved Hanbury Brown and Twiss measurements.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Effects of electric field and shape on the ground state energy of an exciton bound to an ionized donor impurity in ellipsoidal quantum dots

The effects of electric field and shape on the ground state energy of an exciton bound to an ionized donor are studied in a weakly prolate (oblate) GaAs ellipsoidal quantum dot within the effective-mass approximation using a variational method in the framework of perturbation theory. Both the heavy-hole and light-hole excitons are considered. The results show that the energy shift not only depends on the electric field but also on the dot shape and size. The influence of the dot shape on the light hole case is more pronounced than that of the heavy hole case, but the influence of the electric field on the heavy hole case is more pronounced.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Optical density of states in ultradilute GaAsN alloy: Coexistence of free excitons and impurity band of localized and delocalized states

Optically active states in liquid phase epitaxy-grown ultra-dilute GaAsN are studied. The feature-rich low temperature photoluminescence spectrum has contributions from excitonic band states of the GaAsN alloy, and two types of defect states—localized and extended. The degree of delocalization for extended states both within the conduction and defect bands, characterized by the electron temperature, is found to be similar. The degree of localization in the defect band is analyzed by the strength of the phonon replicas. Stronger emission from these localized states is attributed to their giant oscillator strength.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Generation of spin-polarized currents via cross-relaxation with dynamically pumped paramagnetic impurities

Key to future spintronics and spin-based information processing technologies is the generation, manipulation, and detection of spin polarization in a solid state platform. Here, we theoretically explore an alternative route to spin injection via the use of dynamically polarized nitrogen-vacancy (NV) centers in diamond. We focus on the geometry where carriers and NV centers are confined to proximate, parallel layers and use a “trap-and-release” model to calculate the spin cross-relaxation probabilities between the charge carriers and neighboring NV centers. We identify near-unity regimes of carrier polarization depending on the NV spin state, applied magnetic field, and carrier g-factor. In particular, we find that unlike holes, electron spins are distinctively robust against spin-lattice relaxation by other, unpolarized paramagnetic centers. Further, the polarization process is only weakly dependent on the carrier hopping dynamics, which makes this approach potentially applicable over a broad range of temperatures.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Hydrogen passivation of titanium impurities in silicon: Effect of doping conditions

While the contamination of solar silicon by fast diffusing transition metals can be now limited through gettering, much attention has been drawn to the slow diffusing species, especially the early 3d and 4d elements. To some extent, hydrogen passivation has been successful in healing many deep centers, including transition metals in Si. Recent deep-level transient spectroscopy (DLTS) measurements concerning hydrogen passivation of Ti revealed the existence of at least four electrical levels related to Ti{sub i}H{sub n} in the upper-half of the gap. These findings challenge the existing models regarding both the current level assignment as well as the structure/species involved in the defects. We revisit this problem by means of density functional calculations and find that progressive hydrogenation of interstitial Ti is thermodynamically stable in intrinsic and n-doped Si. Full passivation may not be possible to attain in p-type Si as Ti{sub i}H{sub 3} and Ti{sub i}H{sub 4} are metastable against dissociation and release of bond-centered protons. All DLTS electron traps are assigned, namely, E40′ to Ti{sub i}H(-/0), E170′ to Ti{sub i}H{sub 3}(0/+), E(270) to Ti{sub i}H{sub 2}(0/+), and E170 to Ti{sub i}H(0/+) transitions. Ti{sub i}H{sub 4} is confirmed to be electrically inert.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Coaxial pellets for metallic impurity injection on the large helical device

Two coaxial pellets with tungsten inserted into graphite carbon and polyethylene (PE) tubes are compared for tungsten spectroscopic study in the Large Helical Device. The tungsten pellet with carbon tube causes plasma collapse, while that with PE tube smoothly ablates without collapse. The deposition profile of the pellets is analyzed with a help of pellet ablation spectroscopy. It is found that the tungsten pellet with carbon tube can significantly penetrate into the core plasma and leads to the plasma collapse. A tungsten spectrum with radial profile is successfully observed when the tungsten pellet with PE tube is used.

36 MATERIALS SCIENCE↗