Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Germanium”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,297 records · Page 72

Anisotropy in the hole mobility measured along the [110] and [1{sup ¯}10] orientations in a strained Ge quantum well

In this paper, we report on anisotropic transport properties of strained germanium (sGe) quantum wells grown on Si (001) substrates with p-type doping beneath the sGe channel. Mobility measurements were made along orthogonal [110] directions. The level of measured resistivity anisotropy in the [110] and [1{sup ¯}10] orientations was found to vary between 2 and 9 for different samples. This corresponds to an actual mobility anisotropy ratio of between 1.3 and 2, values that are significantly higher than previously found for sGe. From modeling of the low temperature (12 K) mobility, using the relaxation time approach, the anisotropy in mobility was accounted for by a difference in interface roughness scattering between the two orientations. For the [110] orientation, a step height of Δ = 0.28 nm and interface roughness periodicity of λ = 7 nm were found while for the [1{sup ¯}10] orientation, λ reduced to 4 nm and Δ increased to 0.42 nm. High-resolution X-ray diffraction and transmission electron microscopy confirmed a 1° off-cut in the wafer towards the [1{sup ¯}10] direction.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

High quality single crystal Ge nano-membranes for opto-electronic integrated circuitry

A thin, flat, and single crystal germanium membrane would be an ideal platform on which to mount sensors or integrate photonic and electronic devices, using standard silicon processing technology. We present a fabrication technique compatible with integrated-circuit wafer scale processing to produce membranes of thickness between 60 nm and 800 nm, with large areas of up to 3.5 mm{sup 2}. We show how the optical properties change with thickness, including appearance of Fabry-Pérot type interference in thin membranes. The membranes have low Q-factors, which allow the platforms to counteract distortion during agitation and movement. Finally, we report on the physical characteristics showing sub-nm roughness and a homogenous strain profile throughout the freestanding layer, making the single crystal Ge membrane an excellent platform for further epitaxial growth or deposition of materials.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Nanowires enabling strained photovoltaics

Photovoltaic nano-devices have largely been relying on charge separation in conventional p-n junctions. Junction formation via doping, however, imposes major challenges in process control. Here, we report on a concept for photovoltaic energy conversion at the nano scale without the need for intentional doping. Our approach relies on charge carrier separation in inhomogeneously strained germanium nanowires (Ge NWs). This concept utilizes the strain-induced gradient in bandgap along tapered NWs. Experimental data confirms the feasibility of strain-induced charge separation in individual vapor-liquid-solid grown Ge NW devices with an internal quantum efficiency of ∼5%. The charge separation mechanism, though, is not inherently limited to a distinct material. Our work establishes a class of photovoltaic nano-devices with its opto-electronic properties engineered by size, shape, and applied strain.

36 MATERIALS SCIENCE↗

Influence of spin-orbit effects on structures and dielectric properties of neutral lead clusters

Combining molecular beam electric deflection experiments and global optimization techniques has proven to be a powerful tool for resolving equilibrium structures of neutral metal and semiconductor clusters. Herein, we present electric molecular beam deflection experiments on Pb{sub N} (N = 7–18) clusters. Promising structures are generated using the unbiased Birmingham Cluster Genetic Algorithm approach based on density functional theory. The structures are further relaxed within the framework of two-component density functional theory taking scalar relativistic and spin orbit effects into account. Quantum chemical results are used to model electric molecular beam deflection profiles based on molecular dynamics calculations. Comparison of measured and simulated beam profiles allows the assignment of equilibrium structures for the most cluster sizes in the examined range for the first time. Neutral lead clusters adopt mainly spherical geometries and resemble the structures of lead cluster cations apart from Pb{sub 10}. Their growth pattern deviates strongly from the one observed for tin and germanium clusters.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Magnetic behavior in Cr{sub 2}@Ge{sub n} (1≤n≤12) clusters: A density functional investigation

With a goal to produce magnetic moment in Cr{sub 2} Doped Ge{sub n} clusters which will be useful for practical applications, we have considered the structure and magnetic properties of Pure Germanium clusters and substitutionally doped it with Cr dimer to produce Cr{sub 2}@Ge{sub n} clusters. As the first step of calculation, geometrical optimizations of the nanoclusters have been done. These optimized geometries have been used in calculate the average binding energy per atom (BE), HOMO-LUMO gap and hence the relative stability of the clusters. These parameters have been demonstrated as structural and electronic properties of the clusters. Gap between highest occupied molecular orbital and lowest unoccupied molecular orbital indicate cluster to be a potential motif for generating magnetic cluster assembled materials. Based on these values a comparative study on different sized clusters has been done in order to understand the origin of structures, electronic and magnetic properties of Cr{sub 2}@Ge{sub n} nanoclusters.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Stranski-Krastanow islanding initiated on the stochastic rough surfaces of the epitaxially strained thin films

Quantum dots (QD) have discrete energy spectrum, which can be adjusted over a wide range by tuning composition, density, size, lattice strain, and morphology. These features make quantum dots attractive for the design and fabrication of novel electronic, magnetic and photonic devices and other functional materials used in cutting-edge applications. The formation of QD on epitaxially strained thin film surfaces, known as Stranski-Krastanow (SK) islands, has attracted great attention due to their unique electronic properties. Here, we present a systematic dynamical simulation study for the spontaneous evolution of the SK islands on the stochastically rough surfaces (nucleationless growth). During the development of SK islands through the mass accumulation at randomly selected regions of the film via surface drift-diffusion (induced by the capillary and mismatch stresses) with and/or without growth, one also observes the formation of an extremely thin wetting layer having a thickness of a few Angstroms. Above a certain threshold level of the mismatch strain and/or the size of the patch, the formation of multiple islands separated by shallow wetting layers is also observed as metastable states such as doublets even multiplets. These islands are converted into a distinct SK islands after long annealing times by coalescence through the long range surface diffusion. Extensive computer simulation studies demonstrated that after an initial transient regime, there is a strong quadratic relationship between the height of the SK singlet and the intensity of the lattice mismatch strain (in a wide range of stresses up to 8.5 GPa for germanium thin crystalline films), with the exception at those critical points where the morphological (shape change with necking) transition takes place.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Dark matter searches with the CDMS II experiment

The CDMS II experiment ran between 2003 and 2009. A total of 30 germanium and silicon ZIP detectors were operated, producing a high quality set of data that has been analyzed for evidence of and placed leading constraints on standard, low-mass, electron-recoil, and annually modulating WIMP interactions. This article will describe the general operation principles behind the CDMS detectors, report on the results of major Ge and Si detector analyses, and describe the current and future activities of the SuperCDMS program.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Design and realization of one-dimensional double hetero-structure photonic crystals for infrared-radar stealth-compatible materials applications

In this paper, a new type one-dimensional (1D) double hetero-structure composite photonic crystal (CPC) for infrared-radar stealth-compatible materials applications was proposed and studied numerically and experimentally. First, based on transfer matrix method of thin-film optical theory, the propagation characteristics of the proposed structure comprising a stack of different alternating micrometer-thick layers of germanium and zinc sulfide were investigated numerically. Calculation results exhibit that this 1D single hetero-structure PC could achieve a flat high reflectivity gradually with increasing the number of the alternating media layers in a single broadband range. Then, based on principles of distributed Bragg reflector micro-cavity, a 1D double hetero-structure CPC comprising four PCs with thickness of 0.797 μm, 0.592 μm, 1.480 μm, and 2.114 μm, respectively, was proposed. Calculation results exhibit that this CPC could achieve a high reflectance of greater than 0.99 in the wavelength ranges of 3–5 μm and 8–14 μm and agreed well with experiment. Further experiments exhibit that the infrared emissivity of the proposed CPC is as low as 0.073 and 0.042 in the wavelength ranges of 3–5 μm and 8–12 μm, respectively. In addition, the proposed CPC can be used to construct infrared-radar stealth-compatible materials due to its high transmittance in radar wave band.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Largely defocused probe scanning transmission electron microscopy for imaging local modulation of strain field in a hetero interface

We present an innovative method for characterizing the strain field in three dimensions in a hetero interface. Largely defocused probe scanning transmission electron microscopy (LDP-STEM) was employed for imaging the inhomogeneous strain field in a germanium (Ge) layer deposited on a silicon (Si) substrate. In the LDP-STEM image, Ge-atomic columns that are relaxed or strained to the Si substrate in the Si/Ge hetero interface were observed to be distinguishable, allowing for the qualitative characterization of the coherency of the crystal growth. Our results revealed that the strain field is locally modulated along the in-plane direction in the Si/Ge hetero interface.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Ab initio study of molecular and atomic oxygen on GeTe(111) surfaces

Oxidation of the phase-change material germanium telluride (GeTe) is an atomic-scale process of fundamental importance, as it is detrimental to the stability of GeTe-based data-storage devices. Here, we present comprehensive density-functional theory simulations of molecular and atomic oxygen in contact with GeTe(111) surfaces. Molecular O{sub 2} is predicted to readily adsorb on the Ge-terminated (111) surface; the pristine Te-terminated counterpart, by contrast, appears quite inert. The coverage-dependent adsorption of O atoms is then investigated, and based on these data, a surface phase diagram for GeTe(111)/O is constructed. These results afford a detailed, atom-resolved picture of the initial surface oxidation of GeTe, and they harmonize well with a previous X-ray photoelectron spectroscopy study on this very topic.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Enhanced photocurrent of Ge-doped InGaO thin film transistors with quantum dots

The photocurrent of germanium-doped indium-gallium oxide (GIGO) thin film transistors (TFTs) can be observed when the device is exposed to a ultra-violet light because GIGO is a wide band gap semiconducting material. Therefore, we decorated cadmium selenide (CdSe) quantum-dots (QDs) on the surface of GIGO to increase the photocurrent for low-energy light, i.e., visible light. A 10 nm GIGO film was deposited on the SiO{sub 2}/Si substrate by a radio frequency sputter system. Also, we prepared CdSe QDs with sizes of ∼6.3 nm, which can absorb red visible light. QDs were spin-coated onto the GIGO film, and post-annealing was done to provide cross-linking between QDs. The prepared devices showed a 231% increase in photocurrent when exposed to 650 nm light due to the QDs on the GIGO surface. Measurements to construct an energy level diagram were made using ultraviolet photoelectron spectroscopy to determine the origin of the photocurrent, and we found that the small band gap of CdSe QDs enables the increase in photocurrent in the GIGO TFTs. This result is relevant for developing highly transparent photosensors based on oxide semiconductors and QDs.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Structural properties of Ge on SrTiO{sub 3} (001) surface and Ge/SrTiO{sub 3} interface

Germanium−perovskite oxide heterostructures have a strong potential for next-generation low-voltage and low-leakage metal-oxide semiconductor field-effect transistors. We investigated the atomic structure and electronic properties of Ge on perfect and defective (001) SrTiO{sub 3} by first-principle calculations. The specific adsorption sites at the initial growth stage and the atomic structure of Ge on the SrTiO{sub 3} (001) substrate have been systematically investigated. The surface grand potential was calculated and compared as a function of the relative chemical potential. The complete surface phase diagram was presented. The energetically favorable interfaces were pointed out among the atomic arrangements of the Ge/SrTiO{sub 3} (001) interfaces. The atomic structure and electronic properties of the intrinsic point defects were calculated and analyzed for the Ge/SrTiO{sub 3} (001) interfaces.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Flat Ge-doped optical fibres for food irradiation dosimetry

Exposing food to radiation can improve hygiene quality, germination control, retard sprouting, and enhance physical attributes of the food product. To provide for food safety, radiation dosimetry in irradiated food is required. Herein, fabricated germanium doped (Ge-doped) optical fibres have been used. The fibres have been irradiated using a gamma source irradiator, doses in the range 1 kGy to 10 kGy being delivered. Using Ge-doped optical fibres of variable size, type and dopant concentration, study has been made of linearity, reproducibility, and fading. The thermoluminescence (TL) yield of the fibres were obtained and compared. The fibres exhibit a linear dose response over the investigated range of doses, with mean reproducibility to within 2.69 % to 8.77 %, exceeding the dose range of all commercial dosimeters used in evaluating high doses for the food irradiation industry. TL fading of the Ge-doped flat fibres has been found to be < 13%.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

The role of Ag buffer layer in Fe islands growth on Ge (111) surfaces

Sub-monolayer iron atoms were deposited at room temperature on Ge (111)-c(2 × 8) substrates with and without Ag buffer layers. The behavior of Fe islands growth was investigated by using scanning tunneling microscope (STM) after different annealing temperatures. STM images show that iron atoms will cause defects and holes on substrates at room temperature. As the annealing temperature rises, iron atoms pull out germanium to form various kinds of alloyed islands. However, the silver layer can protect the Ag/Ge(111)-(√3×√3) reconstruction from forming defects. The phase diagram shows that ring, dot, and triangular defects were only found on Ge (111)-c(2 × 8) substrates. The kinds of islands found in Fe/Ge system are similar to Fe/Ag/Ge system. It indicates that Ge atoms were pulled out to form islands at high annealing temperatures whether there was a Ag layer or not. But a few differences in big pyramidal or strip islands show that the silver layer affects the development of islands by changing the surface symmetry and diffusion coefficient. The structure characters of various islands are also discussed.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Theoretical and experimental investigations of the thermoelectric properties of Bi{sub 2}S{sub 3}

Electronic and transport properties of Bi{sub 2}S{sub 3} with various dopants are studied using density functional theory and experimental characterizations. First, principle calculations of thermoelectric properties are used to evaluate the thermoelectric potential of the orthorhombic Bi{sub 2}S{sub 3} structure. The computational screening of extrinsic defects is used to select the most favorable n-type dopants. Among all the dopants considered, hafnium and chlorine are identified as prospective dopants, whereas, e.g., germanium is found to be unfavorable. This is confirmed by experiment. Seebeck coefficient (S) and electrical conductivity (σ) measurements are performed at room temperature on pellets obtained by spark plasma sintering. An increase of power factors (S{sup 2}·σ) from around 50 up to 500 μW K{sup −2} m{sup −1} is observed for differently doped compounds. In several series of samples, we observed an optimum of power factor above 500 μW K{sup −2} m{sup −1} at room temperature for a chlorine equivalence of 0.25 mol. % BiCl{sub 3}. The obtained results are plotted on a semilogarithmic log (σ) versus S graph to demonstrate that a very strong linear trend that limits the power factor around 500 μW K{sup −2} m{sup −1} exists. Further improvement of Bi{sub 2}S{sub 3} as thermoelectric material will require finding new doping modes that will break through the observed trend. The results of stability tests demonstrate that properties of optimally doped Bi{sub 2}S{sub 3} are stable.

36 MATERIALS SCIENCE↗

Tomography and optical properties of silver nano-inukshuk

Following a simple dip-and-rinse galvanic displacement reaction silver nano-inukshuks were prepared directly on germanium surfaces. Morphology, 3-dimensional (3D) structure, chemical composition and optical properties of the silver nanostructurs were investigated using scanning electron microscopy (SEM), scanning transmission electron microscopy (STEM), energy-dispersive X-ray spectroscopy (EDX), and cathodoluminescence (CL) spectroscopy. Exact 3D morphology was reconstructed in the by tomography mode of TEM.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Strong emission of terahertz radiation from nanostructured Ge surfaces

Indirect band gap semiconductors are not efficient emitters of terahertz radiation. Here, we report strong emission of terahertz radiation from germanium wafers with nanostructured surfaces. The amplitude of THz radiation from an array of nano-bullets (nano-cones) is more than five (three) times larger than that from a bare-Ge wafer. The power of the terahertz radiation from a Ge wafer with an array of nano-bullets is comparable to that from n-GaAs wafers, which have been widely used as a terahertz source. We find that the THz radiation from Ge wafers with the nano-bullets is even more powerful than that from n-GaAs for frequencies below 0.6 THz. Our results suggest that introducing properly designed nanostructures on indirect band gap semiconductor wafers is a simple and cheap method to improve the terahertz emission efficiency of the wafers significantly.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Resonant quantum efficiency enhancement of midwave infrared nBn photodetectors using one-dimensional plasmonic gratings

We demonstrate up to 39% resonant enhancement of the quantum efficiency (QE) of a low dark current nBn midwave infrared photodetector with a 0.5 μm InAsSb absorber layer. The enhancement was achieved by using a 1D plasmonic grating to couple incident light into plasmon modes propagating in the plane of the device. The plasmonic grating is composed of stripes of deposited amorphous germanium overlaid with gold. Devices with and without gratings were processed side-by-side for comparison of their QEs and dark currents. The peak external QE for a grating device was 29% compared to 22% for a mirror device when the illumination was polarized perpendicularly to the grating lines. Additional experiments determined the grating coupling efficiency by measuring the reflectance of analogous gratings deposited on bare GaSb substrates.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗