Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “GROUND LEVEL”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,297 records · Page 72

A review of laser-pumped infrared lasers

The lasing mechanisms are reviewed of molecules that have demonstrated laser action in the laboratories with laser emissions in the spectral range from 3 to 35 microns. A list of lasants and laser mechanisms are defined. The pumping sources for these lasers are mainly infrared lasers; however, the case in which excitation of bromine atoms at 2.71 microns by a flashlamp as energy input is also included in the review. A conceptual drawing of lasing mechanisms is shown. Three pumping mechanisms are shown, the first being the direct-pumped system in which the lasant molecule absorbs the infrared radiation from pump laser directly, and it is excited into the upper laser level from the ground state. The second system is the indirect-pumped system where the infrared-pump laser first excites an absorbing molecule which stores its vibrational energy. Through collision this energy is transferred to the lasant molecule, populating the upper laser level. In the third system, i.e., in a Br2-CO2 mixture, a flashlamp replaces the infrared laser as the pump source for the absorbing molecule.

Chen, K. Y.↗

Improved definition of crustal anomalies for Magsat data

Final editing and reduction of the equatorial ground observatory data set was completed. Plots of delineation, and the vertical and horizontal components of the time varying field were generated from these data. Appropriate baselines were derived and deviations from these levels can be used as a continuous measure of the external variations at ground level in the sub-auroral zones. They may also be useful as quantitative measures of the intensity of external field activity. Other data sets assembled for dissemination include (1) Kp and Ap - the planetary magnetic indexes; (2) the international magnetic character indexes-Cp; (3) compilations of magnetic storm sudden commencements; (4) time of interplanetary magnetic sector changes; and (5) Dst - the storm disturbance measure. Fine attitude component data with its increased pointing resolution is reducing residuals by an order of magnitude.

Source record↗

Using Stage Level Microseismic Analysis to Investigate Correlate and Ground Truth Cored Hydraulic Fractures

The Hydraulic Fracture Test Site in Reagan County, Texas contains a valuable dataset to correlate the occurrence, position and frequency of microseismic events in relation to physical observations of hydraulic fractures taken from a low-angle whole core acquired immediately adjacent and subsequent to a modern hydraulically fractured horizontal well within the Upper & Middle Wolfcamp formations. Microseismic event density maps visualized through time locate concentrations of microseismic activity in relation to independently documented hydraulic and naturally occurring fractures. Microseismic activity observed over the duration of a single completion stage at the closest proximity to the cored interval demonstrates conformity and correlation with the presence of hydraulic fractures. Changes in microseismic signature are also correlated with changes in pump rates and pressures throughout treatment. A positive correlation was found between the high certainty hydraulic fractures observed in the core and areas of highest microseismic density in the stage of the neighboring horizontal nearest to the Upper Wolfcamp cored interval of the slant well, demonstrating that microseismic density can be a reliable indicator of hydraulic fracture density and complexity around the stimulated well. Given caveats often cited with microseismic acquisition, processing and interpretation, this study provides a ground truth example and insights into the degree of accuracy microseismic can offer as a technology in discerning the efficacy of modern completions.

Fairfield, Ryan↗

Algorithm for Detection of Ground and Canopy Cover in Micropulse Photon-Counting Lidar Altimeter Data in Preparation for the ICESat-2 Mission

NASA's Ice, Cloud and Land Elevation Satellite-II (ICESat-2) mission is a decadal survey mission (2016 launch). The mission objectives are to measure land ice elevation, sea ice freeboard, and changes in these variables, as well as to collect measurements over vegetation to facilitate canopy height determination. Two innovative components will characterize the ICESat-2 lidar: 1) collection of elevation data by a multibeam system and 2) application of micropulse lidar (photon-counting) technology. A photon-counting altimeter yields clouds of discrete points, resulting from returns of individual photons, and hence new data analysis techniques are required for elevation determination and association of the returned points to reflectors of interest. The objective of this paper is to derive an algorithm that allows detection of ground under dense canopy and identification of ground and canopy levels in simulated ICESat-2 data, based on airborne observations with a Sigma Space micropulse lidar. The mathematical algorithm uses spatial statistical and discrete mathematical concepts, including radial basis functions, density measures, geometrical anisotropy, eigenvectors, and geostatistical classification parameters and hyperparameters. Validation shows that ground and canopy elevation, and hence canopy height, can be expected to be observable with high accuracy by ICESat-2 for all expected beam energies considered for instrument design (93.01%-99.57% correctly selected points for a beam with expected return of 0.93 mean signals per shot (msp), and 72.85%-98.68% for 0.48 msp). The algorithm derived here is generally applicable for elevation determination from photoncounting lidar altimeter data collected over forested areas, land ice, sea ice, and land surfaces, as well as for cloud detection.

Algorithms↗

TPSAS-NF1676L-32160-DND

Six noise metrics have been identified as candidates for quantifying ground sonic boom levels from overflight of supersonic aircraft. Each of these metrics (PL, ASEL, BSEL, DSEL, ESEL, and ISBAP) has previously been investigated in meta-analyses using laboratory study data corresponding to perception of sonic booms in outdoor and indoor environments. These metrics are now computed and analyzed for a set of recorded outdoor sonic boom signatures under a low degree of atmospheric turbulence. Predictions of the ground signatures are also computed, without inclusion of turbulence effects, and metrics are compared between measurements and predictions. Metrics least sensitive to atmospheric turbulence effects are identified as potentially more robust for quantifying the sonic boom level from a supersonic aircraft.

Alexandra Loubeau↗

Preliminary Evaluation of TM for Soils Information

Thematic mapper data acquired over Mississippi County, Arkansas, were examined for utility in separating soil associations within generally level alluvium deposited by the Mississippi River. The 0.76 to 0.90 micron (Band 4) and the 1.55 to 1.75 micron (Band 5) were found to separate the different soil associations fairly well when compared to the USDA-SCS general soil map. The thermal channel also appeared to provide information at this level. A detailed soil survey was available at the field level along with ground observations of crop type, plant height, percent cover and growth stage. Soils within the fields ranged from uniform to soils that occur as patches of sand that stand out strongly against the intermingled areas of dark soil. Examination of the digital values of individual TM bands at the field level indicates that the influence of the soil is greater in TM than it was in MSS bands. The TM appears to provide greater detail of within field variability caused by soils than MSS and thus should provide improved information relating to crop and soil properties. However, this soil influence may cause crop identification classification procedures to have to account for the soil in their algorithms.

Thompson, D. R.↗

Analysis of Rotational–Vibrational Transition Frequencies of the HCl Molecule and Its RKR Potentials in the Ground Electronic State

The consistency of all data that have been published to date on the rovibrational line centers of the hydrogen chloride molecule HCl is analyzed. It was revealed that a number of corrections are needed because of systematic inaccuracies in the line center determination. A simultaneous fit of rovibrational transition frequencies was performed in the region from 7.4 to 18075 cm{sup –1}. The isotopically independent spectroscopic parameters for calculating rovibrational energy levels in the ground electronic state are determined. The calculated line centers are compared with the HITRAN data. The obtained spectroscopic parameters are used to calculate the turning points (r{sub min} and r{sub max}) of RKR-potentials of HCl isotopologues. The use of experimental data, including the highest vibrational state with V{sub max} = 8 that lies approximately at half the potential well depth allowed the pointwise potentials to be calculated up to V{sub max} = 20.

74 ATOMIC AND MOLECULAR PHYSICS↗

Medium-Sized Helicopter Noise Abatement Flight Test Data Report

Helicopter noise has consistently hindered operations within urban areas and surrounding communities. To combat this, an extensive flight test campaign, described herein, was conducted to gather acoustic data to support helicopter noise research (e.g., physics-based modeling, operational planning, etc.). Acoustic measurements were collected from four helicopters in the medium-sized weight class with maximum takeoff gross weights between 7,400 and 14,200 lb: a Bell 205 “Huey”, a Sikorsky S-76D, a Leonardo AW139, and a US Coast Guard MH-65 Dolphin (a variant of the commercial Airbus AS365 Dauphin). Each aircraft per- formed a subset of level flyovers, steady descents, turns with various initial conditions, and noise abatement approaches. A distributed ground microphone array spanning approximately 2,000 by 4,000 ft collected measurements of each flyover event. Additionally, a dedicated semicircular microphone array was used for gathering acoustic measurements of static conditions (e.g., hover). This report provides an overview of the flight test methodology, conditions tested, equipment used, and details of the accompanying distribution dataset. Figures of sample results generated for each test point are included to enable comparison and selection of the data at the discretion of the user. Specifically, source noise hemispheres of the steady flight conditions illustrate directivity of over- all levels. Noise contours over the array provide insight into the ground levels associated with approaches and turning events. These data figures are derived from the original acoustic pressure-time histories and vehicle tracking data that are provided in the distribution dataset.

Rotorcraft↗

An experimental and theoretical study of the electronic spectrum of the HBCl free radical

Following our previous discovery of the spectra of the HBX (X = F, Cl, and Br) free radicals [S.-G. He, F. X. Sunahori, and D. J. Clouthier, J. Am. Chem. Soc. 127, 10814 (2005)], the A{sup ~2}A{sup ″}Π−X{sup ~2}A{sup ′} band systems of the HBCl and DBCl free radicals have been studied in detail. The radicals have been prepared in a pulsed electric discharge jet using a precursor mixture of BCl{sub 3} and H{sub 2} or D{sub 2} in high pressure argon. Laser-induced fluorescence (LIF) and single vibronic level emission spectra have been recorded to map out the ground and excited state vibrational energy levels. The band system involves a linear-bent transition between the two Renner-Teller components of what would be a {sup 2}Π electronic state at linearity. We have used high level ab initio theory to calculate the ground and excited state potential energy surfaces and have determined the vibronic energy levels variationally. The theory results were used to assign the LIF spectra which involve transitions from the ground state zero-point level to high vibrational levels of the excited state. The correspondence between theory and experiment, including the transition frequencies, upper state band symmetries, and H, B, and Cl isotope shifts, was used to validate the assignments.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Ground Based, Millimeter Wave Measurement of Ozone in the Middle Atmosphere

There is a need for highly reliable measurements of stratospheric ozone. Policy makers worldwide concerned with public health rely oil a clear consensus from the scientific community as a basis for ozone-related environmental policy that has a significant impact oil national economies. Tile latest Such consensus was presented in WMO, and used in a 1999 meeting of the parties considering amendments to the Montreal Protocol oil Substances that Deplete the Ozone Layer. Tile scientific community, in turn, needs highly precise and accurate measurements of ozone levels, and small time derivatives of these levels, both in continued - development of its understanding of the physical and chemical processes involved and as clear evidence that these processes are occurring as stated. Over most of the world, changes in ozone levels are small. For example, over the heavily populated northern midlatitudes, the linearized rate of ozone decline is between 0.2% per year and 0.7% per year, depending on altitude. These values are small enough to make measurement requirements technically challenging. Data quality may suffer from imperfections in individual instruments. In one instance, early results from a satellite-borne ozone sensor were later found to be invalid because of calibration drift. Even in the absence of drift, tile absolute calibration of a new sensor may differ slightly from that of its predecessor in service. Most ozone remote sensing instruments operate at ultraviolet or infrared wavelengths where scattering from dust and aerosols must be taken into account; results from these systems may be or are affected following a major volcanic eruption, such as tile one at Mt. Pinatubo in 1991. Given these difficulties, a consensus of measurements from several independent systems is required to insure a reliable understanding of stratospheric ozone levels. Because of the above-described need for highly precise and accurate ozone measurements using several independent techniques, there was interest in developing several techniques which were known but not highly developed in the 1980's into systems capable of being used in ail operational manner to make measurements with the level of quality needed to-detect small trends in ozone levels. A ground-based microwave instrument capable of remotely sensing stratospheric ozone had been designed by tile Principal Investigator of the present project. This instrument was built at tile Millitech Corporation in South Deerfield, Massachusetts before tile present work began. (Funding for design and construction of the instrument came from sources other than the present grant.) Tile instrument measured the spectrum of one of the many emission lines produced by purely rotational transitions of ozone, one at a frequency of 110.8 GHz. The altitude distribution of ozone can. in principle, be retrieved from the details of the pressure-broadened spectrum of the ozone transition. However, the level of contamination of the spectral measurement by instrumentally induced artifacts must be very low in order to retrieve a ozone profile of useful quality from it. The Millitech instrument demonstrated spectral purity at ail adequate level, and there were promising ideas for instrumental improvements and for further development of the technique. The initial objectives of the present project, then, were to develop techniques for calibrating the Millitech instrument, to minimize artifacts in tile spectra it produces, to optimally retrieve ozone profiles from tile spectra, to test tile quality of the microwave profiles by comparing them with profiles obtained using several other, independent techniques over both short and periods of time, and to perform research using the ozone data gathered with the instrument.

Parrish, Alan↗

Nonnormality of Sonic Boom Loudness Metrics in the Turbulent Atmospheric Boundary Layer at Large Lateral Distances from the Flight Path

Atmospheric boundary layer (ABL) turbulence causes variability of the sonic boom waveform at the ground. Recent numerical investigations of sonic boom propagation through kinematic velocity fluctuations indicate that loudness metric distributions are positively skewed relative to a normal distribution. This skewness depends on the propagation distance and turbulence intensity. Propagation simulations of N-waves and shaped booms through inhomogeneous ABL turbulence are presented. Meteorological conditions are varied to examine different daytime ABL conditions and their effect on sonic boom loudness distributions. Two outcomes are observed: 1) the loudness metric distributions become increasingly positively skewed as the propagation distance through the ABL increases, and 2) the distributions become increasingly positively skewed at the same lateral distance from the flight path as the convection level of the daytime ABL is increased. Thus, results indicate that ground level measurements of sonic boom loudness from flight tests performed at large lateral distances from the flight path may not be normally distributed, due to turbulence present in the ABL. (This research is supported by the Commercial Supersonic Technology Project of the National Aeronautics and Space Administration under Grant No. 80NSSC19K1685.)

sonic boom↗

Radiative recombination of complex ions

The rates of radiative capture by atomic systems is computed for the first four ionization stages of the abundant elements C, N, O, Ne, Mg, Si, S, and Ar. A simple prescription is given for calculating the rates for systems in higher ionization stages. Results for capture to atomic helium are also given. In the general case, recent calculations of photoionization cross sections have been used to compute capture rates to levels of the ground-state configuration of the recombined species. Captures to other levels of the valence shell and to the higher shells are evaluated using hydrogenic formulae but with a correction factor which takes into account the nonhydrogenic nature of these states. This correction factor is due to the incomplete shielding by the inner electrons and represents essentially an effective charge for the recombining ion; it is determined semiempirically from an appropriate weighting of values derived from the observed level structure for each species. In some cases, for the capture to neutral atomic systems, its application increases the resulting computed recombination rate by a significant amount (about 50%). Computed recombination rates are tabulated for the four ionization stages at an electron temperature of 10,000 K and for the first stage at 100 K. A convenient procedure is outlined for evaluating the rates at other temperatures in the general neighborhood of these values.

Gould, R. J.↗

Evaluation of thermal control surface on-orbit servicing methods for long term missions

Future activities of NASA will include the long-term (10 - 30 years) operation of space vehicles. For this reason, there will be an urgent need to provide the basic technology for space vehicle thermal control surfaces and their functional maintenance for future long-term missions. One of the problems arising in connection with such missions is related to contamination which can degrade operational design parameters of critical and thermal control surfaces. All Space Based Payloads will arrive on orbit with a certain level of contamination from ground handling, and, on orbit, will be subjected to some level of contamination over their mission life. For the extension of mission life, it appears practical to institute surface refurbishment procedures for contaminated and degraded surfaces. Potential resurfacing methods are evaluated, taking into account three potential processes. The most promising of these is a cleaning procedure based on the utilization of atomic oxygen.

Saylor, W.↗

The effects of merging TM and A/C radar on wetland classification

While radar does not provide detailed begetation discrimination, it provide the means to separate areas of different moisture conditions. Thus, the use of LANDSAT Thematic Mapper (TM) in conjunction with the microwave data was attempted. If successful, information on shoreline cover, emergent wetland vegetation and extent, and submerged grassbeds would provide much needed data for planning and maintenance of wetlands. Originally, the goal was to determine the accuracy with which one could categorize various types of vegetation and land use within an inland wetland using LANDSAT TM data. First, a Level 1/2 supervised classification was performed. Following a more detailed ground trust survey, a Level 3 classification was done. Aircraft L-band radar data were received and the decision was made to merge the TM and L-band data and assess whether vegetation catagories within the wetland areas could be better defined. Preliminary results indicate vegetation delineation is improved for open agricultural areas and water, but other features are more confused.

Ormsby, J. P.↗

Coherent population trapping in {sup 87}Rb atoms induced by the optical frequency comb excitation

The excitation of room-temperature four-level {sup 87}Rb atoms by a train of ultrashort pulses is investigated theoretically in the conditions when the pulse repetition period is shorter than the characteristic atomic relaxation times. It is shown that coherent accumulation of excitation leads to coherent population trapping and electromagnetically induced transparency of the excitation pulses when the pulse repetition rate is a subharmonic of the ground-state hyperfine splitting. It is illustrated how the judicious choice for the frequency comb parameters can provide a means to effectively control the degree of coherence between the ground-state hyperfine levels for selective atomic groups, and even transfer the whole atomic distribution to the dark state with up to 95% efficiency.

74 ATOMIC AND MOLECULAR PHYSICS↗

The low-lying 2-sigma-minus states of OH

The configuration-interaction method is used to determine the electronic wave functions of the two lowest 2-sigma-minus states of OH using four different atomic orbital basis sets. Potential energy curves, transition moments, oscillator strengths, and photodissociation cross sections are obtained. Electronic transition dipole moments connecting the excited 1 2-sigma-minus and 2(D)2-sigma-minus states with each other and with the ground chi-2-pi state are presented as functions of internuclear distance. The theoretical absorption oscillator strengths for the D-2-sigma-minus(v prime = 0) from chi-2-pi(v double prime = 0) transition are in good agreement with the empirical value derived from astronomical measurement. The photodissociation cross sections for absorption from the v prime = 0, 1, and 2 levels of the ground state into the continuum of the 1 2-sigma-minus state are calculated, and the interstellar and cometary photodissociation rates are derived.

Van Dishoeck, E. F.↗

Temporal Evolution of SL-9 Impact Sites on Jupiter and Global Maps of Jupiter from Multi-Observatory Visible and Infrared Images

The objective of this research was to investigate the temporal behavior of the impact features on Jupiter created by the fragments of the Shoemaker Levy-9 comet that collided with the planet in July 1994. The primary observations used in the study were ground based images of Jupiter acquired from the Swedish Solar Vacuum Tube on the island of La Palma in the Canary Islands. The measurement of position of the impact features in images acquired immediately after the impact over a period of a few days revealed that the apparent drift rates were too high and that a repetitive pattern could be seen in the longitude position on successive rotations. This could be explained only by the fact that the measured longitudes of the impact sites were being affected by parallax due to a significant elevation of the impact debris above the nominal cloud top altitude value used for image navigation. Once the apparent positions are analyzed as a function of the meridian angle, the parallax equation can be used to infer the height of the impact features above the cloud deck, once the true impact position (longitude) for the feature is known. Due to their inherent high spatial resolution, the HST measurements of the impact site locations have been accepted widely. However, these suffer from the parallax themselves since few of them were obtained at central meridian. Ground based imaging have the potential to improve this knowledge as they do observe most of the impact sites on either side of the central meridian, except for the degraded resolution. Measurements over a large number of images enables us to minimize the position error through regression and thus estimate both the actual impact site location devoid of parallax bias, and also of the altitude level of the impact debris above the cloud deck. With rapid imaging there is the potential to examine the time evolution of the altitude level. Several hundred ground based images were processed, navigated and subjected to the impact site location measurements. HST images were also acquired and used to calibrate the results and to improve the sample. The resources available enabled an in-depth study only of impact site A, however, many more images have since become available through the global network observations through Lowell Observatory.

Limaye, Sanjay S.↗

LUTE primary mirror materials and design study report

The major objective of the Lunar Ultraviolet Telescope Experiment (LUTE) Primary Mirror Materials and Design Study is to investigate the feasibility of the LUTE telescope primary mirror. A systematic approach to accomplish this key goal was taken by first understanding the optical, thermal, and structural requirements and then deriving the critical primary mirror-level requirements for ground testing, launch, and lunar operations. After summarizing the results in those requirements which drove the selection of material and the design for the primary mirror are discussed. Most important of these are the optical design which was assumed to be the MSFC baseline (i.e. 3 mirror optical system), telescope wavefront error (WFE) allocations, the telescope weight budget, and the LUTE operational temperature ranges. Mechanical load levels, reflectance and microroughness issues, and options for the LUTE metering structure were discussed and an outline for the LUTE telescope sub-system design specification was initiated. The primary mirror analysis and results are presented. The six material substrate candidates are discussed and four distinct mirror geometries which are considered are shown. With these materials and configurations together with varying the location of the mirror support points, a total of 42 possible primary mirror designs resulted. The polishability of each substrate candidate was investigated and a usage history of 0.5 meter and larger precision cryogenic mirrors (the operational low end LUTE temperature of 60 K is the reason we feel a survey of cryogenic mirrors is appropriate) that were flown or tested are presented.

Ruthven, Greg↗