Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Function Estimation”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,297 records · Page 72

A generalized modal shock spectra method for spacecraft loads analysis

Unlike an earlier shock spectra approach, generalization permits an accurate elastic interaction between the spacecraft and launch vehicle to obtain accurate bounds on the spacecraft response and structural loads. In addition, the modal response from a previous launch vehicle transient analysis with or without a dummy spacecraft - is exploited to define a modal impulse as a simple idealization of the actual forcing function. The idealized modal forcing function is then used to derive explicit expressions for an estimate of the bound on the spacecraft structural response and forces. Greater accuracy is achieved with the present method over the earlier shock spectra, while saving much computational effort over the transient analysis.

Trubert, M.↗

A generalized modal shock spectra method for spacecraft loads analysis

Unlike the traditional shock spectra approach, the generalization presented in this paper permits elastic interaction between the spacecraft and launch vehicle in order to obtain accurate bounds on the spacecraft response and structural loads. In addition, the modal response from a previous launch vehicle transient analysis - with or without a dummy spacecraft - is exploited in order to define a modal impulse as a simple idealization of the actual forcing function. The idealized modal forcing function is then used to derive explicit expressions for an estimate of the bound on the spacecraft structural response and forces.

Trubert, M.↗

Galactic X-ray emission from pulsars

The contribution of pulsars to the gamma-ray flux from the galactic plane is examined using data from the most recent pulsar surveys. It is assumed that pulsar gamma-rays are produced by curvature radiation from relativistic particles above the polar cap and attenuated by pair production in the strong magnetic and electric fields. Assuming that all pulsars produce gamma-rays in this way, their luminosities can be predicted as a function of period and magnetic field strength. Using the distribution of pulsars in the galaxy as determined from data on 328 pulsars detected in three surveys, the local gamma-ray production spectrum, the longitude profile, and the latitude profile of pulsar gamma-ray flux are calculated. The largest sources of uncertainty in the size of the pulsar contribution are the value of the mean interstellar electron density, the turnover in the pulsar radio luminosity function, and the average pulsar magnetic field strength. A present estimate is that pulsars contribute from 15 to 20 % of the total flux of gamma-rays from the galactic plane.

Harding, A. K.↗

Estimation of solar gravitational harmonics with Starprobe radiometric tracking data

The potential gravitational science return of a proposed spacecraft mission, called Starprobe, is investigated. The current mission plan is to place a spacecraft in a highly eccentric, highly inclined solar orbit with a perihelion distance of four solar radii. A covariance analysis based on Kalman filtering theory is performed to predict the accuracies with which gravitational parameters associated with the nonsphericity of the sun and relativistic effects can be estimated with radiometric tracking data. The accuracies are computed as functions of the quality and quantity of the radiometric data, the orbital parameters, the magnitude and character of the nongravitational accelerations acting on the spacecraft, and the errors in the tracking station locations and the ephemeris of the earth relative to the sun.

Mease, K. D.↗

Characterization of metal-polymer boundaries using Stoneley and Leaky waves

Optical and acoustooptical techniques for bonded surface inspection and interface wave detection are discussed. Interface wave propagation models based on viscous, elastic, and viscoelastic mechanical properties are reviewed. Gross boundary anomalies such as large defects and localized disbond regions were measured using conventional high frequency pulse echo and pitch catch ultratechniques. Bond durabilty is estimated by comparing detected wave attenuation versus frequency as a function of prebond surface preparation with the experimental limit obtained for perfect welded contact. Sensitivity of interface acoustic field periodicity to both residual and dc applied stress at the boundary surface is observed as well as hysteresis due to viscoelastic polymeric behavior as the applied stress is cycled.

Claus, R. O.↗

A preliminary estimate of the EUVE cumulative distribution of exposure time on the unit sphere

A preliminary study of an all-sky coverage of the EUVE mission is given. Algorithms are provided to compute the exposure of the celestial sphere under the spinning telescopes, taking into account that during part of the exposure time the telescopes are blocked by the earth. The algorithms are used to give an estimate of exposure time at different ecliptic latitudes as a function of the angle of field of view of the telescope. Sample coverage patterns are also given for a 6-month mission.

Tang, C. C. H.↗

Space station configuration and flight dynamics identification

The Space Station will be assembled in low earth orbit by a combination of deployable and space erectable modules that are progressively integrated during successive flights of the Shuttle. The crew assisted space construction will result in a configuration which is a large scale composite of structural elements having connectivity with a wide range of possible end conditions and imprecisely known dynamic characteristics. The generic applications of Flight Dynamics Identification to the candidate Space Station configurations currently under consideration are described. Identification functions are categorized, and the various methods for extracting parameter estimates are correlated with the sensing of parameter estimates are correlated with the sensing of specific characteristics of interest to both engineering subsystems and users of the Station's commercial and scientific facilities. Onboard implementation architecture and constraints are discussed from the viewpoint of maximizing integration of the Identification process with the flight subsystem's data and signal flow.

Metter, E.↗

Space station on-orbit identification and performance monitor

This paper describes the generic applications of on-orbit identification to the reference Space Station configuration currently under consideration by NASA. Identification functions are categorized, and the various methods for extracting parameter estimates are correlated with the sensing of specific characteristics of interest to both engineering subsystems and users of the Station's commercial and scientific facilities. A case study of crew motion detection and identification is included to illustrate the application to the Station's disturbance environment and plant characterization using accelerometer sensing. Onboard implementation architecture is discussed from the viewpoint of maximizing integration of the identification process with the flight subsystem's data and signal flow.

Mettler, E.↗

Landsat Thematic Mapper image-derived MTF

The Landsat Image Data Quality Analysis (LIDQA) Program conducted by NASA has the objective to quantify the performance of the Thematic Mapper (TM) on the Landsat-4 and Landsat-5 spacecraft. The interest in the spatial resolution performance of the TM is partly related to the decrease of the instantaneous field of view (IFOV) from 80 m for the MSS to 30 m for the TM. Studies related to the preflight line spread function (LSF), square wave response (SWR), and theoretical component modeling of the TM system modulation transfer function (MTF) have been conducted. However, the need remains to estimate the MTF of the complete system. The present paper is concerned with investigations related to this task. Attention is given to three approaches for measuring the MTF of the TM system from imagery.

Schowengerdt, R. A.↗

Development of a microprocessor controller for stand-alone photovoltaic power systems

A controller for stand-alone photovoltaic systems has been developed using a low power CMOS microprocessor. It performs battery state of charge estimation, array control, load management, instrumentation, automatic testing, and communications functions. Array control options are sequential subarray switching and maximum power control. A calculator keypad and LCD display provides manual control, fault diagnosis and digital multimeter functions. An RS-232 port provides data logging or remote control capability. A prototype 5 kW unit has been built and tested successfully. The controller is expected to be useful in village photovoltaic power systems, large solar water pumping installations, and other battery management applications.

Millner, A. R.↗

Laser sounding of instantaneous and mean speed of wind using correlation method

The correlation methods for laser sounding of wind speed are based on mutual processing of lidar signals scattered from several spatially separated volumes at each altitude investigated. The time of atmospheric aerosol transport between the scattering volumes estimated by the position of maximum of the mutual correlation function is the measure of corresponding wind speed. In this case the distance between the scattering volumes (the measuring base), defining the time of aerosol movement through the measuring base also determines the lidar possibilities for measuring the instantaneous (during the time interval of several seconds) or the mean wind speed (some minutes). Based on the experimental investigations performed using two lidars, these possibilites are analyzed.

Zuev, V. E.↗

An overview of reliability methods in mechanical and structural design

An evaluation is made of modern methods of fast probability integration and Monte Carlo treatment for the assessment of structural systems' and components' reliability. Fast probability integration methods are noted to be more efficient than Monte Carlo ones. This is judged to be an important consideration when several point probability estimates must be made in order to construct a distribution function. An example illustrating the relative efficiency of the various methods is included.

Wirsching, P. H.↗

Forbidden line and H-alpha profiles in T Tauri star spectra - A probe of anisotropic mass outflows and circumstellar disks

The results of a high-resolution spectroscopic study of 10 T Tauri stars (TTS) and two Herbig emission stars are presented based on red echelle spectra including the lines of forbidden O I 6300 A, forbidden N II 6584 A, forbidden S II 6716, 6731 A, as well as H-alpha. The forbidden lines display a continuous progression of profile types. The velocity structure in the forbidden lines is critically examined and compared to computed line profiles for a number of different wind models. Constant velocity spherical or conical winds fail to reproduce the observed line profiles, which are better explained by a wind with a latitude-dependent velocity field. A prediction of the wind model correlating the velocity of the reversal at H-alpha and the forbidden line velocity structure as a function of the view angle to the star is explored. Estimates of the average densities and sizes for the TTS forbidden emission regions are presented, and mass-loss rates are computed. IRAS far-IR fluxes are used to estimate the disk sizes.

Edwards, Suzan↗

Evaluation of a dual processor implementation for a fault inferring nonlinear detection system

The design of a modified fault inferring nonlinear detection system (FINDS) algorithm for a dual-processor configured flight computer is described. The algorithm was changed in order to divide it into its translational dynamics and rotational kinematics and to use it for parallel execution on the flight computer. The FINDS consists of: (1) a no-fail filter (NFF), (2) a set of test-of-mean detection tests, (3) a bank of first order filters to estimate failure levels in individual sensors, and (4) a decision function. NFF filter performance using flight recorded sensor data is analyzed using a filter autoinitialization routine. The failure detection and isolation capability of the partitioned algorithm is evaluated. A multirate implementation for the bias-free and bias filter gain and covariance matrices is discussed.

Godiwala, P. M.↗

Simultaneous orbit determination

Simultaneous orbit determination is demonstrated using live range and Doppler data for the NASA/Goddard tracking configuration defined by the White Sands Ground Terminal (WSGT), the Tracking and Data Relay Satellite (TDRS), and the Earth Radiation Budget Satellite (ERBS). A physically connected sequential filter-smoother was developed for this demonstration. Rigorous necessary conditions are used to show that the state error covariance functions are realistic; and this enables the assessment of orbit estimation accuracies for both TDRS and ERBS.

Wright, J. R.↗

The determination of absolute ro-vibrational intensities for radical diatomic molecules

Ro-vibrational transition intensities of radical and/or chemically reactive molecular species are difficult to determine. A number of methods which might be used to provide information on matrix elements of the electric dipole moment function and the construction of the dipole moment function from the information these methods provide are discussed. The derived dipole moment function represents an optimum choice and allows a calculation (with estimable errors) of the line intensities for a large number of ro-vibrational transitions.

Chackerian, C., Jr.↗

Radar imaging of glaciovolcanic stratigraphy, Mount Wrangell caldera, Alaska - Interpretation model and results

Glaciological measurements and an airborne radar sounding survey of the glacier lying in Mount Wrangell caldera raise many questions concerning the glacier thermal regime and volcanic history of Mount Wrangell. An interpretation model has been developed that allows the depth variation of temperature, heat flux, pressure, density, ice velocity, depositional age, and thermal and dielectric properties to be calculated. Some predictions of the interpretation model are that the basal ice melting rate is 0.64 m/yr and the volcanic heat flux is 7.0 W/sq m. By using the interpretation model to calculate two-way travel time and propagation losses, radar sounding traces can be transformed to give estimates of the variation of power reflection coefficient as a function of depth and depositional age. Prominent internal reflecting zones are located at depths of approximately 59-91m, 150m, 203m, and 230m. These internal reflectors are attributed to buried horizons of acidic ice, possibly intermixed with volcanic ash, that were deposited during past eruptions of Mount Wrangell.

Clarke, Garry K. C.↗

Contributions of low-luminosity sources to the X-ray background

We have exploited the HEAO 1 A-2 data base to determine hard X-ray fluxes, or upper limits, for complete optically selected samples of active and normal galaxies, in order to estimate or to constrain their local X-ray luminosity functions. We find that the luminosity function of Seyfert nuclei must flatten down drastically shortly below the observational limit of Piccinotti et al.; little can be added by dwarf active nuclei hidden in otherwise normal galaxies. We also analyze the possible contribution to the X-ray background from galaxies with strong star formation activity, in the light of the possibility of a substantial cosmological evolution suggested by recent radio and IRAS data.

Nuclei galaxies↗