Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Fermi”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,297 records · Page 72
All sourcesNASA NTRSDOE OSTI
NASA NTRS2019

2900 Square Degree Search for the Optical Counterpart of Short Gamma-Ray Burst GRB 180523B with the Zwicky Transient Facility

There is significant interest in the models for production of short gamma-ray bursts (GRBs). Until now, the number of known short GRBs with multi-wavelength afterglows has been small. While the Fermi GRB Monitor detects many GRBs relative to the Neil Gehrels Swift Observatory, the large localization regions makes the search for counterparts difficult. With the Zwicky Transient Facility (ZTF - part of Palomar Observatory) recently achieving first light, it is now fruitful to use its combination of depth (m (sub AB) approximating 20.6), field of view (approximately 47 square degrees), and survey cadence (every approximately 3 days) to perform Target of Opportunity observations. We demonstrate this capability on GRB 180523B, which was recently announced by the Fermi GRB Monitor as a short GRB. ZTF imaged 2900 square degrees of the localization region, resulting in the coverage of 61.6 percent of the enclosed probability over two nights to a depth of m (sub AB) approximating 20.5. We characterized 14 previously unidentified transients, and none were found to be consistent with a short GRB counterpart. This search with the ZTF shows it is an efficient camera for searching for coarsely localized short GRB and gravitational-wave counterparts, allowing for a sensitive search with minimal interruption to its nominal cadence.

Coughlin, Michael W.↗
NASA NTRS2019

Astro2020 Science White Paper: Prospects for Pulsar Studies at MeV Energies

Enabled by the Fermi Large Area Telescope, we now know young and recycled pulsars fill the gamma-ray sky, and we are beginning to understand their emission mechanism and their distribution throughout the Galaxy. However, key questions remain: Is there a large population of pulsars near the Galactic center? Why do the most energetic pulsars shine so brightly in MeV gamma rays but not always at GeV energies? What is the source and nature of the pair plasma in pulsar magnetospheres, and what role does the polar cap accelerator play? Addressing these questions calls for a sensitive, wide-field MeV telescope, which can detect the population of MeV-peaked pulsars hinted at by Fermi and hard X-ray telescopes and characterize their spectral shape and polarization.

Harding, Alice K.↗
NASA NTRS2019

A Search for High-Energy Counterparts to Fast Radio Bursts

We report on a search for high-energy counterparts to fast radio bursts (FRBs) with the Fermi Gamma-ray Burst Monitor, Fermi Large Area Telescope, and the Neil Gehrels Swift Observatory Burst Alert Telescope. We find no significant associations for any of the 23 FRBs in our sample, but report upper limits to the high-energy fluence for each on timescales of 0.1, 1, 10, and 100 s. We report lower limits on the ratio of the radio to high-energy fluence, f(sub r) /f(sub γ), for timescales of 0.1 and 100 s. We discuss the implications of our non-detections on various proposed progenitor models for FRBs, including analogs of giant pulses from the Crab pulsar and hyperflares from magnetars. This work demonstrates the utility of analyses of high-energy data for FRBs in tracking down the nature of these elusive sources..

Cunningham, Virginia↗
NASA NTRS2019

A Fundamental Plane for Gamma-Ray Pulsars

We show that the γ-ray pulsar observables, i.e., their total γ-ray luminosity, L(sub γ), spectral cutoff energy, ϵ (sub cut), stellar surface magnetic field, B(sub ⋆), and spin-down power ε, obey a relation of the form L(sub γ) = f (ϵ (sub cut), B(sub ⋆), ε ), which represents a 3D plane in their 4D logspace. Fitting the data of 88 pulsars of the second Fermi pulsar catalog, we show this relation to be L(sub γ) ∝ ϵ (sub cut)(sup 1.18±0.24 B(sub ⋆)(sup 0.17± 0.05) ε(sup 0.41±0.08), a pulsar fundamental plane (FP). We show that the observed FP is remarkably close to the theoretical relation L(sub γ) ∝ ϵ (sub cut)(sup 4/3) B(sub ⋆)(sup 1/6) ε(sup 5/12) obtained assuming that the pulsar γ-ray emission is due to curvature radiation by particles accelerated at the pulsar equatorial current sheet just outside the light cylinder. Interestingly, the FP seems incompatible with emission by synchrotron radiation. The corresponding scatter about the FP is ∼0.35 dex and can only partly be explained by the observational errors while the rest is probably due to the variation of the inclination and observer angles. We predict also that ϵ (sub cut) ∝ ε (sup 7/16) toward low ε for both young and millisecond pulsars implying that the observed death line of γ-ray pulsars is due to ϵ (sub cut) dropping below the Fermi band. Our results provide a comprehensive interpretation of the observations of γ-ray pulsars, setting requirements for successful theoretical modeling.

Kalapotharakos, Constantinos↗
NASA NTRS2018

Accretion Disc MHD Winds and Blazar Classification

The Fermi Gamma-Ray Space Telescope observations of blazars show a strong correlation between the spectral index of their -ray spectra and their synchrotron peak frequency synpk ;additionally, the rate of Compton dominance of these sources also seems to be a function of synpk .In this work, we adopt the assumption that the non-thermal emission of blazars is primarily due to radiation by a population of Fermi-accelerated electrons in a relativistic outflow (jet) along the symmetry axis of the blazar's accretion disc. Furthermore, we assume that the Compton component is related to an external photon field of photons, which are scattered from particles of the magnetohydrodynamic wind emanating from the accretion disc. Our results reproduce well the aforementioned basic observational trends of blazar classification by varying just oneparameter, namely the mass accretion rate on to the central black hole.

Boula, Stella↗
NASA NTRS2019

Source of the Bursty Bulk Flow Diffuse Aurora: Electrostatic Cyclotron Harmonic and Whistler Waves in the Coupling of Bursty Bulk Flows to Auroral Precipitation

Electron cyclotron harmonic (ECH) and whistler chorus waves are recognized as the two mechanisms responsible for the resonant wave‐particle interactions necessary to precipitate plasma sheet electrons into the ionosphere, producing the diffuse Aurora. Previous work has demonstrated ECH waves dominate electron scattering at L shells >8, while whistler chorus dominates scattering at L shells L < 8. However, we find from Time History of Events and Macroscale (THEMIS) Interactions during Substorms observations of fast flows at L = 12 that oblique whistler chorus emissions play the dominant role in scattering electrons. Previous works have identified whistler‐mode waves within fast flows that are produced by an electron temperature anisotropy Te,⊥/Te,||> 1, consistent with electron betatron acceleration. Here, however, we find whistler chorus emissions throughout an interval of fast flows where Te,⊥/Te,||< 1. Parallel electron beams account for the enhanced parallel electron temperature and serve as the instability mechanism for the whistler chorus. The parallel electron beams and associated cigar‐shaped distributions are consistent with Fermi acceleration at dipolarizations in fast flows. We demonstrate that the scattering efficiency of the whistler chorus exceeds that of ECH waves, which THEMIS also detects during the fast flows. The obliquity of the whistler waves permits efficient scattering of lower‐energy electrons into the diffuse aurora. We conclude that Fermi acceleration of electrons provides one important free‐energy source for the wave‐particle interactions responsible for coupling plasma sheet electrons into the diffuse aurora during substorm conditions.

Wendel, D. E.↗
NASA NTRS2019

Radio Follow-up of a Candidate γ-Ray Transient in the Sky Localization Area of GW170608

After the identification of a candidate γ-ray transient in the error region of the binary black hole (BBH) merger GW150914 by the Fermi satellite, the question of whether BBH mergers can be associated with electromagnetic counterparts remains highly debated. Here, we present radio follow-up observations of GW170608, a BBH merger that occurred during the second observing run (O2) of the Advanced Laser Interferometer Gravitational-wave Observatory (LIGO). Our radio follow-up focused on a specific field contained in the GW170608 sky localization area, where a candidate high-energy transient was detected by the Fermi Large Area Telescope (LAT). We make use of data collected at 1.4 GHz with the Karl G. Jansky Very Large Array (VLA), as well as with the VLA Lowband Ionosphere and Transient Experiment (VLITE). Our analysis is sensitive to potential radio afterglows with luminosity densities L(1.4GHz) ≳ 6 x 10^(28) erg/sHz. In the most optimistic theoretical models, ≈20% of BBH events occurring in massive hosts could be associated with outflows as radio luminous as this. Although we find no evidence for the presence of a radio counterpart associated with the LAT candidate in the GW170608 error region, our analysis demonstrates the feasibility of future radio follow-up observations of well-localized BBHs. Comparing our radio upper limits with theoretical expectations for the radio afterglows potentially associated with jets launched in BBH mergers, we find that for jets of energy ≈10^(49) erg seen on-axis, only jet angles θ(jet)≳40° are compatible with the observations.

Kyle Artkop↗
NASA NTRS2021

Radio Counterpart Candidates to 4FGL-DR2 Unassociated Sources

For the duration of the Fermi Gamma-Ray Space Telescope's mission, approximately one-third of the point sources detected have been noted as "unassociated," meaning that they seem to have no known counterpart at any other wavelength/frequency. This mysterious part of the gamma-ray sky is perhaps one of the largest unknowns in current astronomical pursuits, and as such has been probed extensively by various techniques at various frequencies. Radio frequencies have been perhaps one of the most fruitful, producing a large fraction of the identi ed and associated Active Galactic Nuclei (AGN) and pulsars noted in each update of the point source catalogs. Here we present a catalog of 7432 radio counterpart candidates for unassociated gamma-ray elds in the 2nd Data Release of the 4th Fermi Point Source Catalog (4FGL-DR2). A description of the catalog and source types is provided followed by a discussion that demonstrates how the results of this work will aid new associations and identi cations. As part of this work, we also present a rst catalog derived from "quicklook" images of the Very Large Array Sky Survey (VLASS).

S Bruzewski↗
NASA NTRS2021

GRB 191016A: A Long Gamma-Ray Burst Detected by TESS

The Transiting Exoplanet Survey Satellite (TESS) exoplanet-hunting mission detected the rising and decaying optical afterglow of GRB 191016A, a long gamma-ray burst (GRB) detected by Swift-BAT but without prompt XRT or UVOT follow-up due to proximity to the Moon. The afterglow has a late peak at least 1000 s after the BAT trigger, with a brightest-detected TESS data point at 2589.7 s post-trigger. The burst was not detected by Fermi-LAT, but was detected by Fermi-GBM without triggering, possibly due to the gradual nature of the rising light curve. Using ground-based photometry, we estimate a photometric redshift of z(sub phot) = 3.29 ± 0.40. Combined with the high-energy emission and optical peak time derived from TESS, estimates of the bulk Lorentz factor Γ(sub BL) range from 90 to 133. The burst is relatively bright, with a peak optical magnitude in ground-based follow-up of R = 15.1 mag. Using published distributions of GRB afterglows and considering the TESS sensitivity and sampling, we estimate that TESS is likely to detect ∼1 GRB afterglow per year above its magnitude limit.

Gamma-ray bursts↗
NASA NTRS2023

The Gamma-Ray Pulsar Phenomenology in View of 3D Kinetic Global Magnetosphere Models

We develop kinetic plasma models of pulsar magnetospheres with magnetic-field-line-dependent plasma injection that reveal the importance of various magnetosphere regions in regulating the gamma-ray emission. We set different particle injection rates for the so-called open, closed, and separatrix zones. Moderate particle injection rates in open and closed zones ensure a global field structure close to the force-free one, while the dissipation occurs mainly in and around the equatorial current sheet. The particles injected in the separatrix zone affect the particle populations that enter the equatorial current sheet region and, therefore, the corresponding accelerating electric fields, particle energies, the spectral cutoff energy, and gamma-ray efficiency. The separatrix zone models reproduce the recently discovered fundamental plane of gamma-ray pulsars consistent with curvature radiation emission, the gamma-ray light-curve shapes, and the radio-lag vs. peak-separation correlation reported in the Fermi second pulsar catalog. The model beaming factors indicate that the pulsar total gamma-ray luminosities listed in the Fermi catalogs are overestimations of the actual ones. We find that the radiation reaction limited regime starts ceasing to govern the high-energy emission for spin-down powers less than 1034 erg/s. Our results also indicate that toward high magnetic inclination angles, the "Y point" around the rotational equator migrates well inside the light cylinder sparking additional peaks in the gamma-ray pulse profiles. We find that an equivalent enhanced particle injection beyond the Y point strengthens these features making the model gamma-ray light curves inconsistent with those observed.

Neutron stars↗
DOE OSTI2022

First Observation of Large Missing-Momentum (e,e&#x27;p) Cross-Section Scaling and the onset of Correlated-Pair Dominance in Nuclei

We report the first measurement of $x_B$-scaling in $(e,e'p)$ cross-section ratios off nuclei relative to deuterium at large missing-momentum of $350 \leq p_{miss} \leq 600$ MeV/c. The observed scaling extends over a kinematic range of $0.7 \leq x_B \leq 1.8$, which is significantly wider than $1.4 \leq x_B \leq 1.8$ previously observed for inclusive $(e,e')$ cross-section ratios. The $x_B$-integrated cross-section ratios become constant (i.e., scale) beginning at $p_{miss}\approx k_F$, the nuclear Fermi momentum. Comparing with theoretical calculations we find good agreement with Generalized Contact Formalism calculations for high missing-momentum ($> 375$ MeV/c), suggesting the observed scaling results from interacting with nucleons in short-range correlated (SRC) pairs. For low missing-momenta, mean-field calculations show good agreement with the data for $p_{miss}\le k_F$, and suggest that contributions to the measured cross-section ratios from scattering off single, un-correlated, nucleons are non-negligible up to $p_{miss}\approx 350$ MeV/c. Therefore, SRCs become dominant in nuclei at $p_{miss}\approx 350$ MeV/c, well above the nuclear Fermi Surface of $k_F \approx 250$ MeV/c.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2022

Performance Before and After Irradiation of Pixelated 3D Silicon Sensors for the HL-LHC CMS Tracker

The Large Hadron Collider (LHC) particle accelerator at European Center for Nuclear Research (CERN) will be shut down starting in 2026 to achieve the High Luminosity Large Hadron Collider (HL-LHC) upgrade. The upgrade will allow for higher fluences, in order to increase the probability of detecting increasingly rare particles, and to obtain higher precision measurements of known particles. To accommodate the new accelerator conditions, many aspects of the Compact Muon Solenoid (CMS) detector will be upgraded; of particular interest for this thesis are the silicon pixel detectors located in the inner tracker. These will be replaced and upgraded to accommodate the higher fluences of the HL-LHC upgrade, as well as to replace existing sensors which have sustained radiation damage. In order for the new sensors to operate under high luminosity conditions, they must be increasingly radiation hard, and in order to detect rare particles, they must be increasingly more precise. The performance of one Centro Nacional de Microelectronica (CNM) 3D silicon sensor before and after undergoing irradiation at fluences similar to those which will be observed at the HL-LHC was investigated to determine radiation hardness and precision. Data was collected at Fermi National Laboratory (Fermilab), in the Fermi National Laboratory Test Beam Facility (FTBF) silicon tracker telescope, which can be used to determine the number of particles, and tracks made by high energy protons passing through. The sensor was also irradiated at Fermilab in the Irradiation Test Area (ITA). Prior to data collection a tuning procedure is carried out to determine ideal bias voltage operating conditions, mask noisy and dead pixels, adjust to the ideal threshold, and map sensor gain. Data is then collected at the FTBF, where the sensor is installed in the center of the FTBF silicon telescope. Variables, including angle and bias voltage, are varied throughout data collection. Data is then processed using an alignment software to determine the exact telescope geometry, along with the tracks which were observed passing through the sensor and telescope. Sensor performance was found to be comparable before and after irradiation, with irradiated results showing slightly lower efficiencies and cluster sizes. Position resolution is comparable both before and after irradiation, and similar distributions of cluster shape are observed. After irradiation, the sensor shows increasing collected charge with bias, an indication of increased width of the depletion region. Peak charge pre-irradiation is higher than post-irradiation peak charge, indicating the irradiated results are not taken under fully-depleted conditions.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2023

On the Neutrino and Gamma-Ray Emission from NGC 1068

IceCube has recently reported the detection of $\sim 1-10 \,{\rm TeV}$ neutrinos from the nearby active galaxy, NGC 1068. The lack of TeV-scale emission from this source suggests that these neutrinos are generated in the dense corona that surrounds NGC 1068's supermassive black hole. In this paper, we present a physical model for this source, including the processes of pair production, pion production, synchrotron, and inverse Compton scattering. We have also performed a new analysis of Fermi-LAT data from the direction of NGC 1068, finding that the gamma-ray emission from this source is very soft but bright at energies below $\sim 1 \, {\rm GeV}$. Our model can predict a gamma-ray spectrum that is consistent with Fermi-LAT observations, but only if the magnetic field within the corona of this active galactic nucleus (AGN) is quite high, namely $B\gtrsim 6 \, {\rm kG}$. To explain the observed neutrino emission, this source must accelerate protons with a total power that is comparable to its intrinsic X-ray luminosity. In this context, we consider two additional nearby active galaxies, NGC 4151 and NGC 3079, which have been identified as promising targets for IceCube.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2024

The Electron Thermal Conductivity of Pu and Zr Substituted Gamma-Uranium

Uranium alloys are attractive recycled nuclear fuels because of their high thermal conductivity (k) and fissile density; however, the effects of alloying elements on k remain unclear. Here, the electron thermal conductivity (k_e) of U-Pu-Zr compositions are calculated using density functional theory. The electronic structure is evaluated to understand the effects of plutonium (Pu) and zirconium (Zr) substitution on the k_e of ?-U. Alloys of up to 37.5 at. % Pu and 37.5 at. % Zr are examined. Two methods are applied to calculate k_e; we find that the accuracy of each method depends on the electronic and mass similarities between the solute and solvent atoms. Specifically, when the solute atom is similar in electronic structure and mass, the method that applies the electron relaxation time of ?-U is best, while if the elements are dissimilar, a mixed method that mixes several parameters associated with k_e from each element in the alloy is best. The introduction of all alloying elements decreases k_e; however, in binary compounds, Pu and Zr have different effects. Pu generally flattens the electronic bands but compensates for this deleterious effect by increasing electron density near the Fermi level. Zr flattens the electronic bands more severely without adding electron density near the Fermi level. Therefore, Zr decreases the k_e more than Pu in binary compounds. In ternary compounds, the difference between Pu and Zr is minimal due to the phononic change from the large mass change of Zr substitution, even at 12.5 at. %. Thus, we predict that higher loadings of Pu, and potentially other actinides, can be added to U-Pu-Zr compositions for faster recycling of spent fuel with without sacrificing k. We also note that these k_e calculation methods can be applied to non-fuel alloys that require k_e predictions, such as cladding, heat exchanger, and structural materials.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Removal and Deactivation of Bond Sodium from Fast Reactor Blanket Materials

The disposition of sodium-bonded spent nuclear fuel and blanket materials in a repository is complicated by the presence of sodium metal that is used as a thermal bond between the uranium metal fuel and blanket slugs and their cladding. The concern is that the metallic sodium could react with water, producing explosive hydrogen gas, or could exhibit a pyrophoric character. Thus, experimental studies were performed to investigate and demonstrate the removal and deactivation of bond sodium from blanket material in a dry environment. Specifically, bond sodium was removed from unirradiated Fermi-1 blanket elements and an assembly via a melt-drain-evaporate process using elevated temperature and reduced pressure. The effectiveness of sodium metal removal from the blanket materials and their associated cladding was =99.9998%, based on post-test quantitative analyses. The separated sodium metal was collected and subsequently deactivated by reacting it in a molten state with a controlled addition of ammonium chloride particles atop a molten salt medium. In this process sodium chloride is formed and assimilates into the salt pool. The subsequent deactivation of the bond sodium produced a solid ingot of sodium chloride, potassium chloride, lithium chloride, and cesium chloride that was devoid of sodium metal based on post-test analyses of the salt product. Both the sodium removal and deactivation operations were conducted within a dry inert atmosphere enclosure. The results of this study substantiate a path forward for the disposition of sodium-bonded blanket materials, including 34 metric tons heavy metal in irradiated Fermi-1 blanket material currently stored at Idaho National Laboratory.

11 - NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
DOE OSTI2025

Compact cryomodule for mobile stand-alone superconducting industrial accelerators

Superconducting RF (SRF) accelerators have the potential to be more profitable in comparison with normally conducting accelerators, as long they can be made compact, achieve operational simplicity, autonomy, trans- portability, satisfactory energy efficiency, as well as have reasonable costs. The development of SRF technologies such as Nb 3 Sn coating, conductively-cooled resonators, and high-capacity liquid-helium-free cryocoolers made SRF accelerators mobile and energetically and economically efficient at a beam power of tens of kW. One of the key elements of such an accelerator is the cryomodule, which must have minimal thermal losses to enable operation from low power cryoheads and enable conductive cooling of SRF resonator. In this research we present the design and test results of a compact cryomodule for an industrial stand-alone SRF linear accelerator proto- type, based on 650 MHz elliptical resonators, being developed at Fermi National Accelerator Laboratory.

43 PARTICLE ACCELERATORS↗
DOE OSTI2025

dCache: The Storage System of Choice for Data-Intensive Applications

The ever-increasing volumes of data produced by modern scientific facilities like EuXFEL and LHC put significant stress on data management infrastructure operated by laboratories and research centers. The challenges to be addressed span the entire data life cycle, from ingest and efficient data analysis to long-term preservation, typically involving large tape libraries. dCache, a storage system developed in collaboration between the Deutsches Elektronen-Synchrotron (DESY), Fermi National Accelerator Laboratory, and Nordic e-Infrastructure Collaboration (NeIC), is designed to manage a large number of disk servers and to facilitate transparent data migration to and from archival storage. Its multifaceted approach offers a unified method to support a variety of scientific use cases with the same storage infrastructure, including high-throughput data ingest, data sharing over wide area networks, efficient access from HPC clusters, and long-term data preservation on tertiary storage. Initially developed for high energy physics (HEP) experiments, dCache is now used by various scientific communities, including astrophysics, biomedical research, and life sciences, each having specific requirements. This paper presents architecture, deployment strategies, performance and scalability enhancements, and recent advancements in dCache addressing the needs of scientific communities. Finally, we touch on the development and release process, ensuring the software’s high quality.

DCache↗
DOE OSTI2020

Alternating Current Photovoltaic Effect

It is well known that the photovoltaic effect produces a direct current (DC) under solar illumination owing to the directional separation of light-excited charge carriers at the p–n junction, with holes flowing to the p-side and electrons flowing to the n-side. In this study, we found that apart from the DC generated by the conventional p–n photovoltaic effect, there is another new type of photovoltaic effect that generates alternating current (AC) in the nonequilibrium states when the illumination light periodically shines at the junction/interface of materials. The peak current of AC at high switching frequency can be much higher than that from DC. The AC cannot be explained by the established mechanisms for conventional photovoltaics; instead, it is suggested to be a result of the relative shift and realignment between the quasi-Fermi levels of the semiconductors adjacent to the junction/interface under the nonequilibrium conditions, which results in electron flow in the external circuit back and forth to balance the potential difference between two electrodes. By virtue of this effect, the device can work as a high-performance broadband photodetector with extremely high sensitivity under zero bias; it can also work as a remote power source providing extra power output in addition to the conventional photovoltaic effect.

36 MATERIALS SCIENCE↗