Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Electron diffraction”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,297 records · Page 72

Surface structure, morphology, and growth mechanism of Fe{sub 3}O{sub 4}/ZnO thin films

We have investigated the growth mechanism and surface structure of magnetite (Fe{sub 3}O{sub 4}) films grown on semiconducting ZnO substrates. Growth proceeds in a wetting layer plus island-mode and a later coalescence of islands, as was verified by electron diffraction, topography measurements of the surface, and the investigation of the microstructure. The typical (111) surface diffraction pattern magnetite is observed already at the early island growth stage. Due to the island-like growth mode, domain boundaries form upon coalescence of the islands. Twin boundaries have been evidenced between neighboring domains. Island growth enables partial relaxation of the misfit strain.

36 MATERIALS SCIENCE↗

Revealing the nanostructure of calcium phosphate coatings using HRTEM/FIB techniques

Herein, we report on the micro- and nanostructure of the calcium phosphate coating produced by pulsed laser deposition (PLD), using focused ion beam (FIB) lamella sample preparation and transmission electron microscopy (TEM) as the characterization technique. The initial selected area electron diffraction (SAED) data demonstrated the presence of hydroxyapatite (HA) over any other possible calcium phosphate crystalline structure and the polycrystalline nature of the coating. Moreover, the SAED analyses showed clear textured ring patterns coherent with the presence of a preferred orientation in the HA nano-crystal growth. The SAED data also indicated that the coating appears to be textured in the 〈002〉 crystalline direction. Dark-field images obtained using 002 as the working reflection showed a clear oriented crystal growth in columns, from bottom to top. These columns have a peculiar arrangement of nano-crystals since, in some cases, the preferred orientation appears to start at a certain distance from the substrate. Direct d-spacing measurements on high-resolution TEM images provided further proof of the presence of an HA nano-crystal structure. The reported data may be of interest in the future to adjust the microstructure of the HA coatings. - Highlights: •The FIB lift-out technique allows a very site-specific sample preparation method for HRTEM analysis. •It also permits a fast assessment of the HA coating thickness and elemental composition (EDS). •The coatings exhibit a nano-crystalline nature, with a texturing effect along the 002 planes. •PLD is suitable for the production of crystalline c-axis oriented hydroxyapatite coatings. •The crystalline HA phase in the PLD coating is very similar to the present in bone.

36 MATERIALS SCIENCE↗

Growth and transport properties of epitaxial lattice matched half Heusler CoTiSb/InAlAs/InP(001) heterostructures

We demonstrate the integration of the lattice matched single crystal epitaxial Half Heusler compound CoTiSb with In{sub 0.52}Al{sub 0.48}As/InP(001) heterostructures using molecular beam epitaxy. CoTiSb belongs to the subset of Half Heusler compounds that is expected to be semiconducting, despite being composed entirely of metallic constituents. The lattice matching and epitaxial alignment of the CoTiSb films were confirmed by reflection high energy electron diffraction and X-ray diffraction. Temperature dependent transport measurements indicate semiconducting-like behavior, with a room temperature Hall mobility of 530 cm{sup 2}/Vs and background Hall carrier density of 9.0 × 10{sup 17} cm{sup −3}, which is comparable to n-Si with similar carrier density. Below 100 K, the films show a large negative magnetoresistance, and possible origins of this negative magnetoresistance are discussed.

36 MATERIALS SCIENCE↗

Importance of Martensite Spatial Distribution at Large Volume Fractions in Imparting Ductility in High-Strength Dual-Phase Steel

Controlled austenite decomposition in a cold-rolled steel was carried out in a hot-dip process simulator with different inter-critical annealing process parameters to produce dual-phase steel consisting of martensite phase fraction above 50%. The evolving microstructure was characterized by using scanning electron microscope and electron backscattered diffraction techniques. Macro- and micro-texture was characterized by using x-ray diffraction and electron backscattered diffraction techniques, respectively. Uniaxial tensile deformation showed a very good combination of ultra-high strength above 900 MPa with uniform elongation of above 7%. An anomalous increase in ductility was observed for steel with high martensite volume fraction of 62.2% compared to that of lower fraction of 52.3%, indicating the influence of size and spatial distribution arrangement of ferrite and martensite phases. The enhancement in the ductility with high strength was attributed to the improved plastic deformability of hard fine martensite phase along with fine ferrite surrounding it. The nature of micro- and macro-texture was also found to affect strain partitioning compatibility between ferrite and martensite in this study.

36 MATERIALS SCIENCE↗

Evidence for graphite-like hexagonal AlN nanosheets epitaxially grown on single crystal Ag(111)

Ultrathin (sub-monolayer to 12 monolayers) AlN nanosheets are grown epitaxially by plasma assisted molecular beam epitaxy on Ag(111) single crystals. Electron diffraction and scanning tunneling microscopy provide evidence that AlN on Ag adopts a graphite-like hexagonal structure with a larger lattice constant compared to bulk-like wurtzite AlN. This claim is further supported by ultraviolet photoelectron spectroscopy indicating a reduced energy bandgap as expected for hexagonal AlN.

36 MATERIALS SCIENCE↗

Dynamics at Surfaces

The 2009 Gordon Conference on Dynamics at Surfaces is the 30th anniversary of a meeting held every two years that is attended by leading researchers in the area of experimental and theoretical dynamics at liquid and solid surfaces. The conference focuses on the dynamics of the interaction of molecules with either liquid or solid surfaces, the dynamics of the outermost layer of liquid and solid surfaces and the dynamics at the liquid-solid interface. Specific topics that are featured include state-to-state dynamics, non-adiabatic interactions in molecule-metal systems, photon induced desorption from semiconductor and metal surfaces, ultrafast x-ray and electron diffraction as probes of the dynamics of ablation, ultrafast vibrational spectroscopy of water surface dynamics, dynamics of a single adsorbate, growth at nano-scale mineral surfaces, dynamics of atom recombination on interstellar dust grains and the dynamics of the interaction of water with lipid bilayers. The conference brings together investigators from a variety of scientific disciplines including chemistry, physics, materials science, geology and biophysics.

36 MATERIALS SCIENCE↗

Growth of ordered SrO layers on Si(100) using metal-organic surface reactions

The formation of ordered alkaline earth metal-oxide layers on Si(100) through metal-organic surface reactions has been investigated. Strontium oxide layers were deposited on a thin (1.0{+-}0.2 nm) SiO{sub 2} layer grown on Si(100) using a saturation coverage of the {beta}-diketonate precursor bis(2,2,6,6-tetramethyl-3,5-heptanedionato)strontium [Sr(thd){sub 2}] followed by reaction with H{sub 2}O. Oxide desorption at high temperatures (>800 deg. C) leads to an ordered strontium layer on the silicon surface. Auger electron spectroscopy, x-ray photoelectron spectroscopy, Rutherford backscattering spectrometry, and low-energy electron diffraction have been used to investigate the progress of the reaction. The data show a Sr/Si(100) surface with 3x order and a Sr coverage of (0.9{+-}0.1)x10{sup 14}/cm{sup 2}. The observed metal coverage and ordering are explained by the saturation of the adsorbed metal-organic layer due to steric interactions that limit the adsorbed coverage. The results are promising for alternative methods to fabricate epitaxial oxides on silicon substrates.

36 MATERIALS SCIENCE↗

Synthesis and properties of ZnTe and Eu{sup 3+} ion co-doped glass nanocomposites

In this study, ZnTe (II-VI) semiconductor and Eu{sup +3}-ion co-doped borosilicate glass has been prepared in the SiO{sub 2}-K{sub 2}O-CaO-BaO-B{sub 2}O{sub 3} glass system followed by controlled heat-treatment to produce glass nanocomposites. Glass transition temperature and crystallization peak temperature have been evaluated using DSC analysis. Dilatometric studies were carried out to evaluate thermal expansion co-efficient, glass transition temperature, and dilatometric softening temperature and found to be 10.7 × 10{sup −6}/K, 580° C and 628° C, respectively. TEM micrographs demonstrate formation of nano sized crystallites of less than 50 nm. The ZnTe crystal formation also established through selected area electron diffraction (SAED) analysis and high resolution images obtained through TEM studies. With increasing heat treatment time, optical transmission cut-off wavelength (λ{sub cut-off}) shifted towards higher wavelength. Excitation spectra were recorded by monitoring emission at 613 nm corresponding to the {sup 5}D{sub 0} → {sup 7}F{sub 2} transition. An intense 394 nm excitation band corresponding to the {sup 7}F{sub 0} → {sup 5}L{sub 6} transition was observed. Emission spectra were then recorded by exciting the glass samples at 394 nm. When the glass is heat-treated for 30 min at 610° C, a 6-fold increase in the intensity of the red emission at 612 nm has been observed, which is attributed to the segregation of Eu{sup 3+} ions into the low phonon energy ZnTe crystallites and as the size of the nanocrystals is smaller than the size of the exciton, quantum confinement effect is visible. Further increase in heat-treatment duration led to decrease in luminescence intensity due to the growth of larger size crystals. {sup 5}D{sub 1} → {sup 7}F{sub 0} transition is visible only in the samples heat-treated for 30 min and 1 h, which is a characteristic of presence of Eu{sup 3+} ions in the low phonon energy ZnTe crystal sites. The micro hardness of the precursor glass and glass nanocomposites was evaluated; base glass shows hardness of 6.7 GPa and hardness of heat-treated glass nanocomposites has been found to decrease with increase in heat-treatment duration (5.5-5.3 GPa). However, mechanical properties are found to be suitable for device applications.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Electrical conductivity of reconstructed Si(111) surface with sodium-doped C{sub 60} layers

Electrical conductance of sodium-doped C{sub 60} ultra-thin layers (1–6 monolayers) grown on the Na-adsorbed Si(111)√3 × √3-Au surface has been studied in situ by four-point probe technique, combined with low-energy electron diffraction observations. Evidence of conductance channel formation through the C{sub 60} ultrathin layer is demonstrated as a result of Na dosing of 3 and 6 monolayers thick C{sub 60} layers. The observed changes in surface conductivity can be attributed to the formation of fulleride-like NaC{sub 60} and Na{sub 2}C{sub 60} compound layers.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Ti{sub 5}O{sub 5} superstructures of cubic titanium monoxide

A cubic model is proposed for the Ti{sub 5}O{sub 5} (Ti{sub 5}▪O{sub 5}□ ≡ Ti{sub 90}▪{sub 18}O{sub 90}□{sub 18}) superstructure of nonstoichiometric titanium monoxide Ti{sub x}O{sub z} with double imperfection. The unit cell of the cubic Ti{sub 5}O{sub 5} superstructure has the threefold lattice parameter of the unit cell of the basis disordered B1 structure of Ti{sub x}O{sub z} monoxide and belongs to space group <##> } P m } 3 }&#x00AF;<!-- ?? --> m $ Pm/bar 3m $ Pm 3-bar m </##>. The channel of the disorder-order transition, i.e., Ti{sub x}O{sub z} (space group <##> } F m } 3 }&#x00AF;<!-- ?? --> m $ Fm/bar 3m $ Fm 3-bar m </##>)-Ti{sub 5}O{sub 5} (space group <##> } P m } 3 }&#x00AF;<!-- ?? --> m $ Pm/bar 3m $ Pm 3-bar m </##>), includes 75 superstructure vectors of seven stars {k_1_0}, {k_7}, {k_6_(_1_)}, {k_6_(_2_)}, {k_4_(_1_)}, {k_4_(_2_)}, and {k_1}. The distribution functions of Ti and O atoms over the sites of the cubic Ti{sub 5}O{sub 5} superstructure are calculated. A comparison of the X-ray and electron diffraction data obtained for ordered TiO{sub 1.087} monoxide with the theoretical simulation results supports the existence of the cubic Ti{sub 5}O{sub 5} superstructure. The cubic (space group <##> } P m } 3 }&#x00AF;<!-- ?? --> m $ Pm/bar 3m $ Pm 3-bar m </##>) Ti{sub 5}O{sub 5} superstructure is shown to be a high-temperature structure relative to the well-known monoclinic (space group C2/m) superstructure of the same type.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Effects of laser irradiation on the morphology of Cu(110)

The effects of pulsed laser irradiation on the morphology of the Cu(110) surface were investigated by means of reflectance difference spectroscopy (RDS) and spot profile analysis low-energy electron diffraction (SPA-LEED). The laser light induces surface defects (adatoms and islands) as well as subsurface dislocation lines. The high surface mobility leads to efficient annealing of the surface defects even at room temperature, whereas the subsurface dislocation lines persist up to temperatures T>800 K. SPA-LEED profiles of the (00) diffraction spot from the laser irradiated surface suggest an anisotropic distribution of the subsurface line defects related to the geometry of the fcc easy glide system, which is corroborated by STM measurements. Comparative experiments using conventional Ar ion bombardment point out the distinctiveness of the morphological changes induced by laser irradiation.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Studying the Formation of Si (100) Stepped Surface in Molecular-Beam Epitaxy

Experimental studies of the formation of a stepped surface structure during molecular-beam epitaxy of silicon on a Si (100) substrate have been carried out in wide ranges of variation of the substrate temperature and silicon growth rate. The conditions of the transition from a two-domain structure of the Si (100) surface to a single-domain structure associated with the formation of diatomic steps are determined using reflection high-energy electron diffraction. It is shown that the effect of an increase in the substrate temperature on the transition to a single-domain structure is non-monotonic: a single-domain surface forms in the region of relatively low temperatures, whereas a two-domain surface forms at high temperatures. The transition to a single-domain structure during the experiment is possible only, if the silicon growth rate is increased above a certain minimum value.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Fe films grown on GaAs(110) in a two-step process: Improved structural and magnetic properties

Fe films of up to 10 ML thickness were grown on cleaved GaAs(110) in a two-step process that associates low-temperature deposition at 130 K with a subsequent annealing to room temperature. Low-energy electron diffraction, scanning tunneling microscopy, and in situ magneto-optical Kerr effect were combined to study these films. The observed magnetic and structural properties are distinctly different from the characteristics of conventionally grown Fe films on GaAs. We found no indication of interface compound formation. The applied two-step growth process is a promising technique to further increase spin-injection and detection efficiencies of Fe/GaAs hybrid structures.

36 MATERIALS SCIENCE↗

Role of Strontium in Oxide Epitaxy on Silicon (001)

Epitaxial oxide-Si heterostructures, which integrate the functionality of crystalline oxides with Si technology, are made possible by a submonolayer of Sr deposited on Si (001). We find by electron diffraction studies using single termination Si wafers that this Sr submonolayer replaces the top layer of Si when deposited at 650 deg. C. Supported by first-principles calculations, we propose a model for the reaction dynamics of Sr on the Si surface and its effect on oxide epitaxy. This model predicts, and we experimentally confirm, an unexplored 25 deg. C pathway to crystalline oxide epitaxy on Si.

36 MATERIALS SCIENCE↗

Growth and properties of heavy fermion CeCu{sub 2}Ge{sub 2} and CeFe{sub 2}Ge{sub 2} thin films

Epitaxial films of heavy fermion CeCu{sub 2}Ge{sub 2} and CeFe{sub 2}Ge{sub 2} are grown on DyScO{sub 3} and MgO substrates using molecular beam epitaxy. The growth begins via island nucleation leading to a granular morphology. The grains grow flat with c-axis orientation after nucleating, as indicated by in-situ reflection high energy electron diffraction (RHEED) and ex-situ analysis including atomic force microscopy (AFM) and x-ray diffraction (XRD). These single phase films show similar temperature dependent transport to single crystals of the materials indicating that similar collective order occurs in the films as in single crystals.

36 MATERIALS SCIENCE↗

A portable molecular beam epitaxy system for in situ x-ray investigations at synchrotron beamlines

A portable synchrotron molecular beam epitaxy (MBE) system is designed and applied for in situ investigations. The growth chamber is equipped with all the standard MBE components such as effusion cells with shutters, main shutter, cooling shroud, manipulator, reflection high energy electron diffraction setup, and pressure gauges. The characteristic feature of the system is the beryllium windows which are used for in situ x-ray measurements. An UHV sample transfer case allows in vacuo transfer of samples prepared elsewhere. We describe the system design and demonstrate its performance by investigating the annealing process of buried InGaAs self-organized quantum dots.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

A nitride-based epitaxial surface layer formed by ammonia treatment of silicene-terminated ZrB{sub 2}

We present a method for the formation of an epitaxial surface layer involving B, N, and Si atoms on a ZrB{sub 2}(0001) thin film on Si(111). It has the potential to be an insulating growth template for 2D semiconductors. The chemical reaction of NH{sub 3} molecules with the silicene-terminated ZrB{sub 2} surface was characterized by synchrotron-based, high-resolution core-level photoelectron spectroscopy and low-energy electron diffraction. In particular, the dissociative chemisorption of NH{sub 3} at 400 °C leads to surface nitridation, and subsequent annealing up to 830 °C results in a solid phase reaction with the ZrB{sub 2} subsurface layers. In this way, a new nitride-based epitaxial surface layer is formed with hexagonal symmetry and a single in-plane crystal orientation.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗