Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Effective diffusivity”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,297 records · Page 72

Diurnal behaviour of water on Mars

A numerical model of the diurnal transport of water across the Martian surface is developed. The atmospheric boundary layer is modeled in terms of local radiative-convective processes, and radiative effects of ice fogs near the surface are included. Diffusion of water in the ground is treated for the cases of adsorption and condensation. The model is applied to the diurnal variation of water vapor in the atmosphere as observed by Barker (1974). The morning rise in the amount of water vapor can be explained in terms of the evaporation of ground fogs. The evening decrease is compatible with the model if adsorption dominates in the soil. The average level of vapor concentration requires that the atmosphere above the boundary layer be relatively dry. The ground fogs persist until midmorning and should be observable. Some consequences of these conclusions are discussed.

Flasar, F. M.↗

Analysis of epitaxial drift field N on P silicon solar cells

The performance of epitaxial drift field silicon solar cell structures having a variety of impurity profiles was calculated. These structures consist of a uniformly doped P-type substrate layer, and a P-type epitaxial drift field layer with a variety of field strengths. Several N-layer structures were modeled. A four layer solar cell model was used to calculate efficiency, open circuit voltage and short circuit current. The effect on performance of layer thickness, doping level, and diffusion length was determined. The results show that peak initial efficiency of 18.1% occurs for a drift field thickness of about 30 micron with the doping rising from 10 to the 17th power atoms/cu cm at the edge of the depletion region to 10 to the 18th power atoms/cu cm in the substrate. Stronger drift fields (narrow field regions) allowed very high performance (17% efficiency) even after irradiation to 3x10 to the 14th power 1 MeV electrons/sq cm.

Baraona, C. R.↗

Plasma field characteristics of directional discontinuities in the interplanetary medium

The paper examines plasma and magnetic-field changes occurring across 1359 directional discontinuities taken from interplanetary data spanning almost four solar rotations. The plasma field characteristics of these events exhibit a distinct variation with large-scale solar-wind velocity. At low velocities, tangential discontinuities appear to predominate. At higher velocities, a substantial and increasing fraction of directional discontinuities exhibits the plasma field properties expected of outwardly propagating rotational discontinuities. The results of Sari (1972, 1975) and of the present study suggest that in the calculation of propagation diffusion coefficients for low-energy cosmic rays, the effects of directional discontinuities should be subtracted from the magnetic fluctuation spectrum during relatively quiet wind conditions. It is not clear that such subtraction is necessary during more disturbed periods.

Solodyna, C. V.↗

Developments in vertical-junction silicon solar cells

Non-reflective vertical junction silicon cells provide high conversion efficiency radiation-resistant solar cells. New techniques of oxidation growth and the use of photolithography enable the use of an orientation dependent etch producing grooves 5 to 10 microns wide over 100 microns deep. These silicon wafers are then processed into solar cells with all of the processes performed at temperatures compatible with producing high efficiency solar cells. Most of the photogenerated carriers are created in the walls where they are within a few microns of the collecting junction. Consequently, degradation of carrier diffusion length due to radiation has a considerably reduced effect on collection efficiency. These 2 cm x 2 cm vertical junction silicon solar cells have exceeded 13% AMO efficiency and have shown superior radiation resistance.

Lindmayer, J.↗

Modification of the flow pass method as applied to problems of chemistry of planet atmospheres

It was shown that the modified flow pass method possesses considerable effectiveness, both in the case when the coefficient of diffusion changes severely in the examined region and in the case when diffusion is the prevalent process, as compared with chemical reactions. The case when a regular pass proves inapplicable, or applicable in a limited interval of the decisive parameters, was examined.

Parshev, V. A.↗

Low cost processes for fabricating silicon solar cells

Solar cell fabrication processes, in particular junction formation and metallization, are evaluated in terms of cell efficiencies, process yields, module packing factors, and energy cost effectiveness. It is shown that for junction formation, the diffusion processes provide a relatively low-cost approach. The costs per unit cell area can be further reduced by increased wafer area and mechanized wafer handling. The costs for a large number of metallization processes, excluding the costs of the metal, are roughly comparable. However, their varying influence on cell performance leads to a significant spread in the allowable process costs.

Goldman, H.↗

Single pass rub phenomena - Analysis and experiment

An experimental and analytical investigation is presented of contact phenomena for the case of a fully-dense copper gas path seal segment which is rubbed by a single steel blade tip at room temperature. The experiments were executed on a pendulum-type test device, with forces, rub energy, surface temperature and residual deformation being determined for each single-path rub test. The thermal and mechanical factors influencing single-pass rub surface temperatures were modeled analytically. It is found that large plastic strains occurred on or near the contact surface of the copper rub specimens. A study of the influence of various material properties on surface temperature showed that increased thermal conductivity of the stationary component played a role in lowering contact temperatures. Increased thermal conductivity of the moving blade tip component and increased thermal diffusivity of the stationary material also had a beneficial effect.

Kennedy, F. E.↗

Energetic interplanetary nucleon flux anisotropies - The effect of earth's bow shock and magnetosheath on sunward flow

Attention is given to the combined, average effects of the bow shock and magnetosheath on the diffusive flow of interplanetary nuclei. The observations presented show that differences between 'connected' and 'unconnected' data subsets are apparent from the beginning of the analysis. Through an investigation of the mean unconnected diffusive anisotropy (those fluxes least affected by the earth's bow shock and magnetosheath) it is confirmed that the cross-field transport of MeV energy nuclei in interplanetary space is statistically significant and in the direction expected from the large-scale particle flux gradients. The direction of particle flow relative to the IMF is then used to show that nucleon flow characteristics on connected IMF differ from those on unconnected IMF. A scenario for producing this difference is then presented. It is concluded that the inclusion of the bow shock connected information biases measurements of the flux anisotropies of MeV energy H.

Christon, S. P.↗

An electrochemical study of Ni/2+/, Co/2+/, and Zn/2+/ ions in melts of composition CaMgSi2O6

Results are reported for a study of the behavior of Ni(2+), Co(2+), and Zn(2+) in molten diopside, determined by cyclic voltametry, as a first step in adapting electrochemical methods for use in experimental geochemistry. The techniques used are described, the theory is briefly discussed, and it is demonstrated that Ni(2+), Co(2+), and Zn(2+) can be reduced, then reoxidized in an uncomplicated case of reversible charge transfer at the Pt electrode. This implies that the neutral metal atoms remain undissolved in the melt. The kinetics of the reduction process, the effects of concentration, the standard reduction potentials, and the diffusion coefficients are discussed in detail. The observations are consistent with the mechanism of Ni(2+) diffusion by transport from site to site. As the proportion of SiO2 in the melt increases, a higher activation energy is required for Ni(2+) to move, and the rate of diffusion is lowered.

Semkow, K. W.↗

Spectral radiance errors in remote sensing ground studies due to nearby objects

Attention is given to the error that can occur in all radiometric measurements owing to the presence of nearby objects. When a researcher positions himself on the side of a target point opposite the sun, his body gives rise to two erroneous effects. First, it blocks a portion of the incoming diffuse sky radiance to the target point, and second, it reflects incoming diffuse and direct solar irradiance and ground exitance onto the target point. It is noted that the same phenomenon occurs for any nearby object, whether it be a field truck, a building structure, or a row of trees. This error deriving from nearby objects is often not recognized by researchers or is considered insignificant with no knowledge of its magnitude. The approach taken here is to mathematically model the radiant transfers that take place between the global irradiance, panel, or scene and the object and to report the magnitude of this error for various solar zenith angles, wavelengths, size and distances of objects (steradian blockage), and spectral reflectances of the scene and object. The scene, object, and panel are assumed to be Lambertian, and the object is always located on the side of the target point opposite the sun.

Kimes, D. S.↗

Surface and allied studies in silicon solar cells

Significant improvements were made in the short-circuit current-decay method of measuring the recombination lifetime tau and the back surface recombination velocity S of the quasineutral base of silicon solar cells. The improvements include a circuit implementation that increases the speed of switching from the forward-voltage to the short-circuit conditions. They also include a supplementation of this method by some newly developed techniques employing small-signal admittance as a function of frequency omega. This supplementation is highly effective for determining tau for cases in which the diffusion length L greatly exceeds the base thickness W. Representative results on different solar cells are reported. Some advances made in the understanding of passivation provided by the polysilicon/silicon heterojunction are outlined. Recent measurements demonstrate that S 10,000 cm/s derive from this method of passivation.

Lindholm, F. A.↗

Cosmic-ray transport in accelerating flows

The quasi-linear transport equation of energetic charged particles is derived, including scattering by Alfven waves propagating parallel and antiparallel to a uniform magnetic field, losses by synchrotron radiation, and acceleration of the cold background fluid supporting the waves. As in the comoving frame equations of radiative transfer, scattering, and loss terms are evaluated in the frame in which the fluid is locally at rest. The diffusion approximation is applied to the resulting equation, yielding a transport equation for the isotropic part of the distribution function and a first-order approximation to the anisotropy. The conditions under which this approximation may be applied are discussed. In the nonrelativistic regime, the standard equation of the diffusion approximation is recovered. As contributions previously investigated, new effects appear from the spatial and temporal variations of the fluid velocity as well as the synchrotron radiation terms. These are discussed in detail.

Kirk, John G.↗

Elemental abundance analyses with coadded DAO spectrograms. VI - The mercury-manganese stars Nu Cancri, Iota Coronae Borealis and HR 8349

The elemental abundances of three mercury-manganese stars, Nu Cancri, Iota Coronae Borealis, and HR 8349, were found to be consistent with previous analyses of this series. As Iota CrB is a double-lined spectroscopic binary with a small velocity amplitude for most of its period, its study required determining whether the observed lines were produced in the primary or secondary or both. The derived abundances and effective termperatures were used along with those of mercury-manganese stars previously analyzed in order to extend the study of probable correlations between abundances, with the effective temperature and surface gravity in accordance with radiative diffusion explanations.

Adelman, Saul J.↗

Distortion of homogeneous turbulence by axisymmetric strain and dilatation

Rapid distortion theory is applied to study distortion of homogeneous turbulence subject to two different axisymmetric strain modes: the axisymmetric contraction (AC, nozzle-type flow), and the axisymmetric expansion (AE, diffuser-type flow). The paper explores the differences in effects of the two axisymmetric strain modes on the anisotropy of correlations and structures of turbulence; examines the effect of dilatation on the distortion of turbulence; and provides a theoretical background for turbulence model development. It is found that velocity and vorticity fluctuations are enhanced more efficiently by contraction than by expansion; contraction produces much higher anisotropy in velocity and vorticity than expansion; root-mean-square pressure is slightly reduced during contraction, whereas it increases rapidly during expansion; and vortical structures of rodlike shape develop in a contraction flow, while disklike structures develop in an expansion flow. A simple model that reflects the dependence of turbulence evolution on structural parameters such as the Reynolds-stress anisotropy and total strain is proposed, and is shown to outperform all other models for all cases examined, regardless of the mean strain rate.

Lee, Moon Joo↗

Some Observations on Transitory Stall in Conical Diffusers

Results from an experimental investigation on the flow through conical diffusers are presented. The mean and fluctuating velocity fields are compared for three diffusers with total diffusion angles of 16, 20 and 24 degrees, in the throat Mach number (M sub t) range of 0.05 to 0.95. Each of the diffusers were 14 cm long and had a 5.08 cm inlet diameter, and the flow exited into the ambient. The boundary layer at the throat was thin with the throat diameter (D sub t) to momentum thickness (O) ratio being as high as 800 at M(sub t) = 0.4. While the 16 deg diffuser flow exited with a top-hat mean velocity profile, increasing losses due to increasing separation resulted in fuller profiles for the 20 and 24 degree cases. A detailed flow field study was conducted for the 16 deg. diffuser. The u'-spectrum, measured at the exit plane, exhibited a peak apparently due to the ensuing jet column instability throughout the M(sub t) range covered. In addition, a much lower frequency spectral peak also occurred in the M(sub t) range of 0.3 to 0.7. Both of the spectral peaks were due to axisymmetric flow fluctuations. A self-sustaining flow oscillation occurred in the M(sub t) range of 0.6 to 0.85, emitting a loud tone, when the jet column instability frequency matched the resonance frequency of the diffuser. Limited data showed that artificial acoustic excitation was effective in reducing the flow fluctuations, with a resultant increase in the pressure recovery, at low M(sub t).

Zaman, K. B. M. Q.↗

Some observations on transitory stall in conical diffusers

Results from an experimental investigation on the flow through conical diffusers are presented. The mean and fluctuating velocity fields are compared for three diffusers with total diffusion angles of 16, 20 and 24 degrees, in the throat Mach number (M sub t) range of 0.05 to 0.95. Each of the diffusers were 14 cm long and had a 5.08 cm inlet diameter, and the flow exited into the ambient. The boundary layer at the throat was thin with the throat diameter (D sub t) to momentum thickness (O) ratio being as high as 800 at M(sub t) = 0.4. While the 16 deg diffuser flow exited with a top-hat mean velocity profile, increasing losses due to increasing separation resulted in fuller profiles for the 20 and 24 degrees cases. A detailed flow field study was conducted for the 16 deg diffuser. The u'-spectrum, measured at the exit plane, exhibited a peak apparently due to the ensuing jet column instability throughout the M(sub t) range covered. In addition, a much lower frequency spectral peak also occurred in the M(sub t) range of 0.3 to 0.7. Both of the spectral peaks were due to axisymmetric flow fluctuations. A self-sustaining flow oscillation occurred in the M(sub t) range of 0.6 to 0.85, emitting a loud tone, when the jet column instability frequency matched the resonance frequency of the diffuser. Limited data showed that artificial acoustic excitation was effective in reducing the flow fluctuations, with a resultant increase in the pressure recovery, at low M(sub t).

Zaman, K. B. M. Q.↗

An investigation of the information propagation and entropy transport aspects of Stirling machine numerical simulation

Aspects of the information propagation modeling behavior of integral machine computer simulation programs are investigated in terms of a transmission line. In particular, the effects of pressure-linking and temporal integration algorithms on the amplitude ratio and phase angle predictions are compared against experimental and closed-form analytic data. It is concluded that the discretized, first order conservation balances may not be adequate for modeling information propagation effects at characteristic numbers less than about 24. An entropy transport equation suitable for generalized use in Stirling machine simulation is developed. The equation is evaluated by including it in a simulation of an incompressible oscillating flow apparatus designed to demonstrate the effect of flow oscillations on the enhancement of thermal diffusion. Numerical false diffusion is found to be a major factor inhibiting validation of the simulation predictions with experimental and closed-form analytic data. A generalized false diffusion correction algorithm is developed which allows the numerical results to match their analytic counterparts. Under these conditions, the simulation yields entropy predictions which satisfy Clausius' inequality.

Goldberg, Louis F.↗

A semikinetic model for early stage plasmasphere refilling. II - Effects of wave-particle interactions

The paper treats the early stages of plasmasphere refilling along an initially depleted L = 4 magnetic flux tube through a semikinetic model, with special attention given to the effects of wave-particle interactions in which stochastic diffusion of ions in perpendicular velocity due to equatorially concentrated electromagnetic ion cyclotron waves plays a central role. Characteristic individual ion trajectories are examined, as well as the devolution of bulk parameters and ion distribution functions when equal 'polar wind' streams are injected at the northern and southern ionospheres. In the ion trajectories, relatively modest and realistic perpendicular electric field power levels are found to lead to decreased mirror latitudes, substantial acceleration, and equatorial entrainment of these ions. A substantial equatorial density depletion is also found, in agreement with the results of Olsen (1992).

Lin, J.↗