Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Diode”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,297 records · Page 72

Permanent polarization and charge distribution in organic light-emitting diodes (OLEDs): Insights from near-infrared charge-modulation spectroscopy of an operating OLED

Vapor-deposited Alq{sub 3} layers typically possess a strong permanent electrical polarization, whereas NPB layers do not. (Alq{sub 3} is tris(8-quinolinolato)aluminum(III); NPB is 4,4′-bis[N-(1-naphthyl)-N-phenylamino]biphenyl.) The cause is a net orientation of the Alq{sub 3} molecules with their large dipole moments. Here we report on consequences for an organic light-emitting diode (OLED) with an NPB hole-transport layer and Alq{sub 3} electron-transport layer. The discontinuous polarization at the NPB|Alq{sub 3} interface has the same effect as a sheet of immobile negative charge there. It is more than compensated by a large concentration of injected holes (NPB{sup +}) when the OLED is running. We discuss the implications and consequences for the quantum efficiency and the drive voltage of this OLED and others. We also speculate on possible consequences of permanent polarization in organic photovoltaic devices. The concentration of NPB{sup +} was measured by charge-modulation spectroscopy (CMS) in the near infrared, where the NPB{sup +} has a strong absorption band, supplemented by differential-capacitance and current-voltage measurements. Unlike CMS in the visible, this method avoids complications from modulation of the electroluminescence and electroabsorption.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Voltage-induced electroluminescence characteristics of hybrid light-emitting diodes with CdSe/Cd/ZnS core-shell nanoparticles embedded in a conducting polymer on plastic substrates

We investigate the electroluminescence (EL) characteristics of a hybrid light-emitting diode (HyLED) with an emissive layer comprised of CdSe/Cd/ZnS core-shell nanoparticles (NPs) embedded in poly(9,9-di-n-octylfluorenyl-2,7-diyl) (PFO) on a plastic substrate. The EL characteristics change dramatically with increasing of the biased voltage. At low voltages, recombination of electrons and holes occurs only in the PFO film because of poor charge transfer in the PFO-CdSe/Cd/ZnS NPs composite film, while the color of the light-emitting from the HyLED changes from blue to red as the biased voltage increases from 7.5 to 17.5 V. We examine and discuss the mechanism of this color tunability.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Tailoring of polarization in electron blocking layer for electron confinement and hole injection in ultraviolet light-emitting diodes

The influence of the AlGaN electron blocking layer (EBL) with graded aluminum composition on electron confinement and hole injection in AlGaN-based ultraviolet light-emitting diodes (LEDs) are investigated. The light output power of LED with graded AlGaN EBL was markedly improved, comparing to LED with conventional EBL. In experimental results, a high increment of 86.7% can be obtained in light output power. Simulation analysis shows that via proper modification of the barrier profile from the last barrier of the active region to EBL, not only the elimination of electron overflow to p-type layer can be achieved but also the hole injection into the active region can be enhanced, compared to a conventional LED structure. The dominant factor to the performance improvement is shown to be the modulation of polarization field by the graded Al composition in EBL.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Characterization of the deep levels responsible for non-radiative recombination in InGaN/GaN light-emitting diodes

This paper presents an extensive investigation of the deep levels related to non-radiative recombination in InGaN/GaN light-emitting diodes (LEDs). The study is based on combined optical and deep-level transient spectroscopy measurements, carried out on LEDs with identical structure and with different values of the non-radiative recombination coefficient. Experimental data lead to the following, relevant, results: (i) LEDs with a high non-radiative recombination coefficient have a higher concentration of a trap (labeled as “e{sub 2}”) with an activation energy of 0.7 eV, which is supposed to be located close to/within the active region; (ii) measurements carried out with varying filling pulse duration suggest that this deep level behaves as a point-defect/dislocation complex. The Arrhenius plot of this deep level is critically compared with the previous literature reports, to identify its physical origin.

36 MATERIALS SCIENCE↗

A spin light emitting diode incorporating ability of electrical helicity switching

Fabrication and optical characteristics of a spin light-emitting-diode (spin-LED) having dual spin-injection electrodes with anti-parallel magnetization configuration are reported. Alternating a current between the two electrodes using a computer-driven current source has led us to the observation of helicity switching of circular polarization at the frequency of 1 kHz. Neither external magnetic fields nor optical delay modulators were used. Sending dc-currents to both electrodes with appropriate ratio has resulted in continuous variation of circular polarization between the two opposite helicity, including the null polarization. These results suggest that the tested spin-LED has the feasibility of a monolithic light source whose circular polarization can be switched or continuously tuned all electrically.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Distinguishing triplet energy transfer and trap-assisted recombination in multi-color organic light-emitting diode with an ultrathin phosphorescent emissive layer

An ultrathin layer of deep-red phosphorescent emitter tris(1-phenylisoquinoline) iridium (III) (Ir(piq){sub 3}) is inserted within different positions of the electron blocking layer fac-tris (1-phenylpyrazolato-N,C{sup 2′})-iridium(III) (Ir(ppz){sub 3}) to distinguish the contribution of the emission from the triplet exciton energy transfer/diffusion from the adjacent blue phosphorescent emitter and the trap-assisted recombination from the narrow band-gap emitter itself. The charge trapping effect of the narrow band-gap deep-red emitter which forms a quantum-well-like structure also plays a role in shaping the electroluminescent characteristics of multi-color organic light-emitting diodes. By accurately controlling the position of the ultrathin sensing layer, it is considerably easy to balance the white emission which is quite challenging for full-color devices with multiple emission zones. There is nearly no energy transfer detectable if 7 nm thick Ir(ppz){sub 3} is inserted between the blue phosphorescent emitter and the ultrathin red emitter.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Stability improvement of organic light emitting diodes by the insertion of hole injection materials on the indium tin oxide substrate

The degradation of organic light-emitting diodes (OLEDs) is a very complex issue, which might include interfacial charge accumulation, material diffusion, and electrical-induced chemical reaction during the operation. In this study, the origins of improvement in device stability from inserting a hole injection layer (HIL) at the indium tin oxide (ITO) anode are investigated. The results from aging single-layer devices show that leakage current increases in the case of ITO/hole transport layer contact, but this phenomenon can be prevented by inserting molybdenum oxide (MoO{sub 3}) or 1,4,5,8,9,11-hexaazatriphenylene hexacarbonitrile (HAT-CN{sub 6}) as an HIL. Moreover, X-ray photoemission spectroscopy suggests that the diffusion of indium atoms and active oxygen species can be impeded by introducing MoO{sub 3} or HAT-CN{sub 6} as an HIL. These results reveal that the degradation of OLEDs is related to indium and oxygen out-diffusion from the ITO substrates, and that the stability of OLEDs can be improved by impeding this diffusion with HILs.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Enhanced out-coupling efficiency of organic light-emitting diodes using an nanostructure imprinted by an alumina nanohole array

We demonstrate organic light-emitting diodes (OLEDs) with enhanced out-coupling efficiency containing nanostructures imprinted by an alumina nanohole array template that can be applied to large-emitting-area and flexible devices using a roll-to-roll process. The nanostructures are imprinted on a glass substrate by an ultraviolet nanoimprint process using an alumina nanohole array mold and then an OLED is fabricated on the nanostructures. The enhancement of out-coupling efficiency is proportional to the root-mean-square roughness of the nanostructures, and a maximum improvement of external electroluminescence quantum efficiency of 17% is achieved. The electroluminescence spectra of the OLEDs indicate that this improvement is caused by enhancement of the out-coupling of surface plasmon polaritons.

36 MATERIALS SCIENCE↗

Visible-light electroluminescence in Mn-doped GaAs light-emitting diodes

We observed visible-light electroluminescence (EL) due to d-d transitions in light-emitting diodes with Mn-doped GaAs layers (here, referred to as GaAs:Mn). Besides the band-gap emission of GaAs, the EL spectra show two peaks at 1.89 eV and 2.16 eV, which are exactly the same as {sup 4}A{sub 2}({sup 4}F) → {sup 4}T{sub 1}({sup 4}G) and {sup 4}T{sub 1}({sup 4}G) → {sup 6}A{sub 1}({sup 6}S) transitions of Mn atoms doped in ZnS. The temperature dependence and the current-density dependence are consistent with the characteristics of d-d transitions. We explain the observed EL spectra by the p-d hybridized orbitals of the Mn d electrons in GaAs.

36 MATERIALS SCIENCE↗

Investigation on edge fringing effect and oxide thickness dependence of inversion current in metal-oxide-semiconductor tunneling diodes with comb-shaped electrodes

A particular edge-dependent inversion current behavior of metal-oxide-semiconductor (MOS) tunneling diodes was investigated utilizing square and comb-shaped electrodes. The inversion tunneling current exhibits the strong dependence on the tooth size of comb-shaped electrodes and oxide thickness. Detailed illustrations of current conduction mechanism are developed by simulation and experimental measurement results. It is found that the electron diffusion current and Schottky barrier height lowering for hole tunneling current both contribute on inversion current conduction. In MOS tunneling photodiode applications, the photoresponse can be improved by decreasing SiO{sub 2} thickness and using comb-shaped electrodes with smaller tooth spacing. Meantime, the high and steady photosensitivity can also be approached by introducing HfO{sub 2} into dielectric stacks.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Experimental verification of effects of barrier dopings on the internal electric fields and the band structure in InGaN/GaN light emitting diodes

We experimentally clarify the effects of barrier dopings on the polarization induced electric fields and the band structure in InGaN/GaN blue light emitting diodes. Both effects were independently verified by using electric field modulated reflectance and capacitance-voltage measurement. It is shown that the Si barrier doping does reduce the polarization induced electric field in the quantum wells. But the benefit of Si-doping is nullified by modification of the band structure and depletion process. With increased number of doped barriers, smaller number of quantum wells remains in the depletion region at the onset of the diffusion process, which can reduce the effective active volume and enhance the electron overflow.

36 MATERIALS SCIENCE↗

Barrier height enhancement of Ni/GaN Schottky diode using Ru based passivation scheme

Wet chemical passivation of n-GaN surface using Ru based solution has been reported. X-ray photoelectron spectroscopy characterization of the GaN surface revealed removal of surface oxides by the introduction of Ru complex species. Ni/n-GaN Schottky barrier diodes were fabricated on passivated GaN and a remarkable improvement in Schottky barrier height from 0.76 eV to 0.92 eV was observed.

36 MATERIALS SCIENCE↗

Comparative study of field-dependent carrier dynamics and emission kinetics of InGaN/GaN light-emitting diodes grown on (112{sup ¯}2) semipolar versus (0001) polar planes

The characteristics of electroluminescence (EL) and photoluminescence (PL) emission from GaN light-emitting diodes (LEDs) grown on (112{sup ¯}2) semipolar plane and (0001) polar plane have been comparatively investigated. Through different bias-dependent shifting trends observed from the PL and time-resolved PL spectra (TRPL) for the two types of LEDs, the carrier dynamics within the multiple quantum wells (MQWs) region is systematically analyzed and the distinct field-dependent emission kinetics are revealed. Moreover, the polarization induced internal electric field has been deduced for each of the LEDs. The relatively stable emission behavior observed in the semipolar LED is attributed to the smaller polarization induced internal electric field. The study provides meaningful insight for the design of quantum well (QW) structures with high radiative recombination rates.

36 MATERIALS SCIENCE↗

Direct periodic patterning of GaN-based light-emitting diodes by three-beam interference laser ablation

We report on the direct patterning of two-dimensional periodic structures in GaN-based light-emitting diodes (LEDs) through laser interference ablation for the fast and reliable fabrication of periodic micro- and nano-structures aimed at enhancing light output. Holes arranged in a two-dimensional hexagonal lattice array having an opening size of 500 nm, depth of 50 nm, and a periodicity of 1 μm were directly formed by three-beam laser interference without photolithography or electron-beam lithography processes. The laser-patterned LEDs exhibit an enhancement in light output power of 20% compared to conventional LEDs having a flat top surface without degradation of electrical and optical properties of the top p-GaN layer and the active region, respectively.

36 MATERIALS SCIENCE↗

Nonradiative recombination mechanisms in InGaN/GaN-based light-emitting diodes investigated by temperature-dependent measurements

Two kinds of InGaN-based light-emitting diodes (LEDs) are investigated to understand the nonradiative carrier recombination processes. Various temperature-dependent measurements such as external quantum efficiency, current-voltage, and electroluminescence spectra are utilized from 50 to 300 K. Based on these experimental results, we analyze the dominant nonradiative recombination mechanism for each LED device. We also analyze the effect of the dominant nonradiative recombination mechanism on the efficiency droop. On the basis of correlation between the efficiency droop and nonradiative recombination mechanisms, we discuss an approach to reducing the efficiency droop for each LED device.

36 MATERIALS SCIENCE↗

Distributed feedback GaSb based laser diodes with buried grating

We report on the growth, fabrication, and experimental study of distributed feed-back antimonide diode lasers with buried grating. A second order index-coupled grating was defined by interferometric lithography on the top of the laser waveguide and dry etched by reactive ion etching. The grating was then buried thanks to an overgrowth of the top cladding layer using molecular beam epitaxy. The wafer was then processed using standard photolithography and wet etching into 15 μm-wide laser ridges. Single frequency laser emission at a wavelength of 2.2 μm was measured with a side mode suppression ratio of 34 dB, a maximum output power of 30 mW, and a total continuous tuning range of 6.5 nm.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Simultaneous enhancement of electron overflow reduction and hole injection promotion by tailoring the last quantum barrier in InGaN/GaN light-emitting diodes

A three-step graded undoped-InGaN layers embedded between the GaN last quantum barrier layer and the p-AlGaN electron blocking layer was proposed and its effect on the performance of InGaN/GaN light-emitting diodes was investigated both experimentally and theoretically. In the proposed structure, the electron leakage is found to be effectively reduced, while the hole injection efficiency is simultaneously increased significantly, hence enabling a greatly enhanced radiative recombination rate within the active region. As a result, improvements of 12.25% in the optical output power and 11.98% in the external quantum efficiency are obtained from the proposed device with the respect to the reference device.

36 MATERIALS SCIENCE↗

Numerical study of the influence of applied voltage on the current balance factor of single layer organic light-emitting diodes

Current balance factor (CBF) value, the ratio of the recombination current density and the total current density of a device, has an important function in fluorescence-based organic light-emitting diodes (OLEDs), as well as in the performance of the organic electrophosphorescent devices. This paper investigates the influence of the applied voltage of a device on the CBF value of single layer OLED based on the numerical model of a bipolar single layer OLED with organic layer trap free and without doping. Results show that the largest CBF value can be achieved when the electron injection barrier (ϕ{sub n}) is equal to the hole injection barrier (ϕ{sub p}) in the lower voltage region at any instance. The largest CBF in the higher voltage region can be achieved in the case of ϕ{sub n} > ϕ{sub p} under the condition of electron mobility (μ{sub 0n}) > hole mobility (μ{sub 0p}), whereas the result for the case of μ{sub 0n} < μ{sub 0p}, is opposite. The largest CBF when μ{sub 0n} = μ{sub 0p} can be achieved in the case of ϕ{sub n} = ϕ{sub p} in the entire region of the applied voltage. In addition, the CBF value of the device increases with increasing applied voltage. The results obtained in this paper can present an in-depth understanding of the OLED working mechanism and help in the future fabrication of high efficiency OLEDs.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗