Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Diffraction systems”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,297 records · Page 72

Solid State Reactions in the Mo/O--Fe System under Mechanical Alloying

Two types of solid state reactions that occur during mechanical alloying of Mo/O --20 at. % Fe system with various oxygen concentrations were studied by Moessbauer spectroscopy and X-ray diffraction. The first type of solid state reaction, Mo/O+Fe{yields}bcc Mo(O)-Fe, was observed for Mo samples with 8 at. % of oxygen. The second type of solid state reaction proceeds as Mo/O+Fe{yields}bcc Mo(O)-Fe+hcp Mo(O)-Fe{yields}bcc Mo(O)-Fe+Am Mo(O)-Fe for Mo samples with 14 at. % of oxygen and 1.6 at. % of MoO{sub 3} phase. The assumption about correlation between the second component dissolution rate and mixture components yield point ratio is confirmed.

36 MATERIALS SCIENCE↗

Phase diagram and magnetocaloric effects in Ni{sub 1-x}Cr{sub x}MnGe{sub 1.05}

The structural and magnetic properties of the Ni{sub 1−x}Cr{sub x}MnGe{sub 1.05} system (for x = 0, 0.035, 0.070, 0.105) have been studied by x-ray diffraction (XRD), differential scanning calorimetry (DSC), and magnetization measurements. A change in crystal structure from orthorhombic to hexagonal was observed in the XRD data at chromium concentrations of x = 0.035, 0.070, and 0.105. The values of the cell parameters and volume of the unit cell for orthorhombic and hexagonal phase were determined. It was found that the partial substitution of Cr for Ni in Ni{sub 1−x}Cr{sub x}MnGe{sub 1.05} results in a first order magnetostructural transition from antiferromagnetic to ferromagnetic (FM) at T{sub M} = 132 K for x = 0.105. A FM to paramagnetic second order transition has been observed at T{sub C} = 204 K. A magnetic entropy change of |ΔS{sub M}| = 4.5 J/kg K for ΔH = 5 T was observed in the vicinity of T{sub C} and T{sub M} for x = 0.105. The values of the latent heat (L = 2.2 J/g) and corresponding total entropy changes (ΔS{sub T} = 16 J/kg K) have been determined from DSC measurements. A concentration-dependent phase diagram of transition temperatures has been constructed using the magnetic and DSC data.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

The method for measuring the groove density of variable-line-space gratings with elimination of the eccentricity effect

To eliminate the eccentricity effect, a new method for measuring the groove density of a variable-line-space grating was adapted. Based on grating equation, groove density is calculated by measuring the internal angles between zeroth-order and first-order diffracted light for two different wavelengths with the same angle of incidence. The measurement system mainly includes two laser sources, a phase plate, plane mirror, and charge coupled device. The measurement results of a variable-line-space grating demonstrate that the experiment data agree well with theoretical values, and the value of measurement error (ΔN/N) is less than 2.72 × 10{sup −4}.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

A new development on measurement and control software of SANS BATAN spectrometer (SMARTer) in Serpong, Indonesia

In 2005, the main computer for data acquisition and control system of Small-angle Neutron Scattering (SANS) BATAN Spectrometer (SMARTer) was replaced since it halted to operate the spectrometer. According to this replacement, the new software for data acquisition and control system has been developed in-house. Visual Basic programming language is used in developing the software. In the last two years, many developments have been made both in the hardware and also the software to conduct the experiment is more effective and efficient. Lately, the previous motor controller card (ISA Card) was replaced with the programmable motor controller card (PCI Card) for driving one motor of position sensitive detector (PSD), eight motors of four collimators, and six motors of six pinhole discs. This new control system software makes all motors can be moved simultaneously, then it reduces significantly the consuming time of setting up the instrument before running the experiment. Along with that development, the new data acquisition software under MS Windows operating system is also developed to drive a beam stopper in X-Y directions as well as to read the equipment status such as position of the collimators and PSD, to acquire neutron counts on monitor and PSD detectors, and also to manage 12 samples position automatically. A timer object which is set in one second to read the equipment status via serial port of the computer (RS232C), and general purpose interface board (GPIB) for reading the total counts of each pixel of the PSD from histogram memory was used in this new software. The experiment result displayed in real time on the main window, and the data is saved in the special format for further data reduction and analysis. The new software has been implemented and performed for experiment using a preset count or preset time mode for absolute scattering intensity method.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

A machine learning photon detection algorithm for coherent x-ray ultrafast fluctuation analysis

X-ray free electron laser experiments have brought unique capabilities and opened new directions in research, such as creating new states of matter or directly measuring atomic motion. One such area is the ability to use finely spaced sets of coherent x-ray pulses to be compared after scattering from a dynamic system at different times. This enables the study of fluctuations in many-body quantum systems at the level of the ultrafast pulse durations, but this method has been limited to a select number of examples and required complex and advanced analytical tools. By applying a new methodology to this problem, we have made qualitative advances in three separate areas that will likely also find application to new fields. As compared to the “droplet-type” models, which typically are used to estimate the photon distributions on pixelated detectors to obtain the coherent x-ray speckle patterns, our algorithm achieves an order of magnitude speedup on CPU hardware and two orders of magnitude improvement on GPU hardware. We also find that it retains accuracy in low-contrast conditions, which is the typical regime for many experiments in structural dynamics. Finally, it can predict photon distributions in high average-intensity applications, a regime which up until now has not been accessible. Our artificial intelligence-assisted algorithm will enable a wider adoption of x-ray coherence spectroscopies, by both automating previously challenging analyses and enabling new experiments that were not otherwise feasible without the developments described in this work.

47 OTHER INSTRUMENTATION↗

Electromagnetic waves in an optical photonic lattice

Laser light propagation in a photonic lattice consisting of two parallel waveguide arrays is theoretically studied using the coupled mode method, with the interaction of each waveguide with the nearest neighbours and between the waveguides of the arrays being taken into account. Analytical expressions are obtained that make it possible to accurately predict the presence of localisation of light depending on the coupling constants. Particular solutions of a system of coupled waves are found, which describe strongly localised light propagating without transverse diffraction along the entire lattice at certain values of the coupling constants. The emergence of spatially limited transverse diffraction of light is predicted. (integral optics)

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Interfacial reconstruction effects in insulating double perovskite Nd2NiMnO6/SrTiO3 and Nd2NiMnO6/NdGaO3 thin films

Ferromagnetic insulating (FMI) double perovskite oxides (DPOs) A2BB′O6 with near-room-temperature Curie temperatures are promising candidates for ambient-temperature spintronics applications. To realize their potential, epitaxial stabilization of DPO films and understanding the effect of multiple broken symmetries across the film/substrate interface are crucial. This study investigates ultrathin films of the FMI Nd2NiMnO6 grown on SrTiO3 (STO) and NdGaO3 (NGO) substrates. By comparing growth on these substrates, we examine the influence of polarity and structural symmetry mismatches, which are absent in the NGO system. The interface exhibits immeasurable resistance in both cases. Using synchrotron x-ray diffraction, we show that films have three octahedral rotational domains because of the structural symmetry mismatch with the STO substrate. Furthermore, our coherent Bragg rod analysis of specular x-ray diffraction reveals a significant modification of the out-of-plane lattice parameter within a few unit cells at the film/substrate interface and the surface. This arises from polarity compensation and surface symmetry breaking, respectively. These structural alterations influence the Mn orbital symmetry, a dependence that we further confirm through x-ray linear dichroism measurements. Since the ferromagnetism in insulating DPOs is mediated by orbital-dependent superexchange interactions [Phys. Rev. Lett. 100, 186402 (2008)0031-900710.1103/PhysRevLett.100.186402], our study provides a framework for understanding the evolution of magnetism in ultrathin geometry.

Bhattacharya, Nandana↗

Epitaxial lateral overgrowth in the system Si/SiO{sub x}/Si: The influence of residual oxygen at the interface

We have studied epitaxial lateral overgrowth from the liquid phase in the system Si/SiO{sub x}/Si using a dedicated, synchrotron-based x-ray diffraction setup (topomicroscopy) and transmission electron microscopy. A combination of high angular resolution in reciprocal space with a high spatial resolution in real space may probe lattice tilts in the microradian range on a micrometer scale. We attribute the observed curvature of the silicon lamella to an oxygen loss within the SiO{sub x} layer. Finite-element calculations on the elastic strain distribution and a numerical description of the x-ray scattering process strongly support this scenario.

36 MATERIALS SCIENCE↗

Temperature and composition phase diagram in the iron-based ladder compounds Ba 1 - x Cs x Fe 2 Se 3

We investigated the iron-based ladder compounds (Ba,Cs)Fe₂Se₃. Their parent compounds BaFe₂Se₃ and CsFe₂Se₃ have different space groups, formal valences of Fe, and magnetic structures. Electrical resistivity, specific heat, magnetic susceptibility, x-ray diffraction, and powder neutron diffraction measurements were conducted to obtain a temperature and composition phase diagram of this system. Block magnetism observed in BaFe₂Se₃ is drastically suppressed with Cs doping. In contrast, stripe magnetism observed in CsFe₂Se₃ is not so fragile against Ba doping. A new type of magnetic structure appears in intermediate compositions, which is similar to stripe magnetism of CsFe₂Se₃, but interladder spin configuration is different. Intermediate compounds show insulating behavior, nevertheless a finite T-linear contribution in specific heat was obtained at low temperatures.

Hawai, Takafumi↗

Weak exchange striction between the 4 f and 3 d ions in the multiferroic GdMn 2 O 5

We used single-crystal neutron diffraction to investigate the magnetic structures of the multiferroic GdMn 2 O 5 . The system undergoes a first-order incommensurate to commensurate magnetic transition below 33 K, accompanied by the appearance of electric polarization P . Upon cooling, P increases smoothly while the magnetic order shows an abrupt enhancement in intensity below 20 K owing to the large increase of the rare-earth Gd moment. The contrasting temperature evolution of the magnetic order and polarization indicates the polarization is mainly driven by the exchange striction between the magnetic Mn ions. The incommensurate phase in the intermediate temperature range has a cycloidal modulation along the c axis, with spin configuration projected in the ab plane similar to the commensurate phase. The lack of observable bulk polarization suggests the exchange striction is not the dominant mechanism for the polarization in the incommensurate phase.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Thermal cycling induced alteration of the stacking order and spin-flip in the room temperature van der Waals magnet Fe 5 GeTe 2

The magnetic properties of the quasi-two-dimensional van der Waals magnet Fe 5–δ GeTe 2 (F5GT), which has a high ferromagnetic ordering temperature T C ~315 K, remain to be better understood. It has been demonstrated that the magnetization of F5GT is sensitive to both the Fe deficiency δ and the thermal-cycling history. Here, we investigate the structural and magnetic properties of F5GT single crystals with a minimal Fe deficiency (|δ |≤ 0.1), utilizing combined x-ray and neutron scattering techniques. Herein our study reveals that the quenched F5GT single crystals experience an irreversible, first-order transition at T S ~110 K upon first cooling, where the stacking order partly or entirely converts from ABC-stacking order to AA-stacking order. Importantly, the magnetic properties, including the magnetic moment direction and the enhanced T C after the thermal cycling, are intimately related to the alteration of the stacking order. Our work highlights the significant influence of the lattice symmetry to the magnetism in F5GT.

2-dimensional systems↗

Rare-earth titanate melt structure and glass formation

The structure of rare–earth titanate melts and glasses of composition 17RE 2 O 3 .83TiO 2 have been investigated in situ by aerodynamic levitation with laser heating. Ti K–edge X–ray absorption near–edge structure (XANES) spectroscopy reveals an effect of RE cation size on mean Ti–O coordination numbers ( n TiO ), which increase from ~4.8(2) in glass–forming La titanate to ~5.1(2) in non–glass–forming Sc titanate liquids. We suggest that the associated increase in OTi 3 triclusters in melts bearing smaller RE cations tends to inhibit glass formation. Both XANES and high–energy X–ray diffraction indicate increases in n TiO as the liquids supercool and vitrify. Results are discussed in the context of alkali and alkaline–earth titanate glasses, extending the observed dependence of n TiO on structural basicity (modifier content divided by potential) to trivalent modifiers and the molten state. We suggest that the most stable titanate glasses form close to compositions where, on average, two oxygen anions bond to each titanium, allowing a continuous, disordered Ti–O network of bridging oxygen (OTi 2 ), or with equal numbers of OTi 3 triclusters and OTi 1 non–bridging oxygen in charge–balance. Here, we report on new glasses formed from praseodymium, europium, and gadolinium titanate melts, the latter being the smallest rare–earth for which binary titanate glasses have been obtained.

36 MATERIALS SCIENCE↗

Task-based modeling and optimization of a cone-beam CT scanner for musculoskeletal imaging

Purpose: This work applies a cascaded systems model for cone-beam CT imaging performance to the design and optimization of a system for musculoskeletal extremity imaging. The model provides a quantitative guide to the selection of system geometry, source and detector components, acquisition techniques, and reconstruction parameters. Methods: The model is based on cascaded systems analysis of the 3D noise-power spectrum (NPS) and noise-equivalent quanta (NEQ) combined with factors of system geometry (magnification, focal spot size, and scatter-to-primary ratio) and anatomical background clutter. The model was extended to task-based analysis of detectability index (d') for tasks ranging in contrast and frequency content, and d' was computed as a function of system magnification, detector pixel size, focal spot size, kVp, dose, electronic noise, voxel size, and reconstruction filter to examine trade-offs and optima among such factors in multivariate analysis. The model was tested quantitatively versus the measured NPS and qualitatively in cadaver images as a function of kVp, dose, pixel size, and reconstruction filter under conditions corresponding to the proposed scanner. Results: The analysis quantified trade-offs among factors of spatial resolution, noise, and dose. System magnification (M) was a critical design parameter with strong effect on spatial resolution, dose, and x-ray scatter, and a fairly robust optimum was identified at M {approx} 1.3 for the imaging tasks considered. The results suggested kVp selection in the range of {approx}65-90 kVp, the lower end (65 kVp) maximizing subject contrast and the upper end maximizing NEQ (90 kVp). The analysis quantified fairly intuitive results--e.g., {approx}0.1-0.2 mm pixel size (and a sharp reconstruction filter) optimal for high-frequency tasks (bone detail) compared to {approx}0.4 mm pixel size (and a smooth reconstruction filter) for low-frequency (soft-tissue) tasks. This result suggests a specific protocol for 1 x 1 (full-resolution) projection data acquisition followed by full-resolution reconstruction with a sharp filter for high-frequency tasks along with 2 x 2 binning reconstruction with a smooth filter for low-frequency tasks. The analysis guided selection of specific source and detector components implemented on the proposed scanner. The analysis also quantified the potential benefits and points of diminishing return in focal spot size, reduced electronic noise, finer detector pixels, and low-dose limits of detectability. Theoretical results agreed quantitatively with the measured NPS and qualitatively with evaluation of cadaver images by a musculoskeletal radiologist. Conclusions: A fairly comprehensive model for 3D imaging performance in cone-beam CT combines factors of quantum noise, system geometry, anatomical background, and imaging task. The analysis provided a valuable, quantitative guide to design, optimization, and technique selection for a musculoskeletal extremities imaging system under development.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Formation of conical emission of supercontinuum during filamentation of femtosecond laser radiation in fused silica

The formation of conical emission of supercontinuum during filamentation of femtosecond laser pulses with central wavelengths in a wide range is studied experimentally, numerically, and analytically. The frequency-angular intensity distribution of the spectral components of conical emission is determined by the interference of supercontinuum emission in a filament of a femtosecond laser pulse. The interference of supercontinuum emission has a general character, exists at different regimes of group velocity dispersion, gives rise to the fine spectral structure after the pulse splitting into subpulses and the formation of a distributed supercontinuum source in an extended filament, and causes the decomposition of the continuous spectrum of conical emission into many high-contrast maxima after pulse refocusing in the filament. In spectroscopic studies with a tunable femtosecond radiation source based on a TOPAS parametric amplifier, we used an original scheme with a wedge fused silica sample. Numerical simulations have been performed using a system of equations of nonlinear-optical interaction of laser radiation under conditions of diffraction, wave nonstationarity, and material dispersion in fused silica. The analytic study is based on the interference model of formation of conical emission by supercontinuum sources moving in a filament.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

A five-channel quasi-optical multiplexer of 12- to 90-GHz frequency range

An effective five-channel quasi-optical multiplexer, which distributes microwave signals of the frequency range of 12–90 GHz on five frequency channels, Ku, K, Ka, U, and E (frequency ranges of standard single-mode waveguides), or combines these channels into a single wave stream, has been developed for the first time. A relatively homogeneous characteristic with a total loss level of about 1.5 dB is achieved in 90% of each range band. A detailed analysis of diffraction and ohmic losses in the frequency channels of the multiplexer has been carried out.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Incorrect support and missing center tolerances of phasing algorithms

In x-ray diffraction microscopy, iterative algorithms retrieve reciprocal space phase information, and a real space image, from an object's coherent diffraction intensities through the use of a priori information such as a finite support constraint. In many experiments, the object's shape or support is not well known, and the diffraction pattern is incompletely measured. We describe here computer simulations to look at the effects of both of these possible errors when using several common reconstruction algorithms. Overly tight object supports prevent successful convergence; however, we show that this can often be recognized through pathological behavior of the phase retrieval transfer function. Dynamic range limitations often make it difficult to record the central speckles of the diffraction pattern. We show that this leads to increasing artifacts in the image when the number of missing central speckles exceeds about 10, and that the removal of unconstrained modes from the reconstructed image is helpful only when the number of missing central speckles is less than about 50. In conclusion, this simulation study helps in judging the reconstructability of experimentally recorded coherent diffraction patterns.

36 MATERIALS SCIENCE↗