Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Computing, Lattice”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,297 records · Page 72

Modeling of the Site Preference in Ternary B2-Ordered Ni-Al-Fe Alloys

The underlying equilibrium structure, site substitution behavior, and lattice parameter of ternary Ni-Fe-Al alloys are determined via Monte Carlo-Metropolis computer simulations and analytical calculations using the BFS method for alloys for the energetics. As a result of the theoretical calculations presented, a simple approach based on the energetics of small atomic clusters is introduced to explain the observed site preference schemes.

Bozzolo, Guillermo H.↗

Optics-free x-ray FEL oscillator

There is a need for an Optics-Free FEL Oscillators (OFFELO) to further the advantages of free-electron lasers and turning them in fully coherent light sources. While SASE (Self-Amplified Spontaneous Emission) FELs demonstrated the capability of providing very high gain and short pulses of radiation and scalability to the X-ray range, the spectra of SASE FELs remains rather wide ({approx}0.5%-1%) compared with typical short wavelengths FEL-oscillators (0.01%-0.0003% in OK-4 FEL). Absence of good optics in VUV and X-ray ranges makes traditional oscillator schemes with very high average and peak spectral brightness either very complex or, strictly speaking, impossible. In this paper, we discuss lattice of the X-ray optics-free FEL oscillator and present results of initial computer simulations of the feedback process and the evolution of FEL spectrum in X-ray OFFELO. We also discuss main limiting factors and feasibility of X-ray OFFELO.

43 PARTICLE ACCELERATORS↗

Ab initio lattice thermal conductivity of Mg Si O 3 across the perovskite-postperovskite phase transition

Lattice thermal conductivity (κ lat ) of MgSiO 3 postperovskite (MgPPv) under the Earth's lower mantle high pressure-temperature conditions is studied using the phonon quasiparticle approach by combing ab initio molecular dynamics and lattice dynamics simulations. Phonon lifetimes are extracted from the phonon quasiparticle calculations, and the phonon group velocities are computed from the anharmonic phonon dispersions, which, in principle, capture full anharmonicity. Here, it is found that throughout the lowermost mantle, including the D” region, κ lat of MgPPv is ~25% larger than that of MgSiO 3 perovskite (MgPv), mainly due to MgPPv's higher phonon velocities. Such a difference in phonon velocities between the two phases originates in the MgPPv's relatively smaller primitive cell. Systematic results of temperature and pressure dependences of both MgPPv's and MgPv's κ lat are demonstrated.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Advanced Simulation Tools for Muon-Based Accelerators

The project developed new software tools incorporating the most accurate theoretical calculations and experimental data available for crucial and not-yet-considered physics processes specific to muon accelerators. These new tools were applied to modeling muon ionization cooling channels for a muon collider or a neutrino factory, the facilities that have the potential to discover and explore new exciting fundamental physics but require the development of demanding technologies and innovative concepts. G4beamline, COSY Infinity, and WARP computer codes are particularly well-suited for addressing muon accelerator modeling problems. G4beamline was chosen for its flexibility and modularity, and for being one of the de facto standard codes used by the muon accelerator community. COSY was selected for speed, ability to take into account high-order nonlinear effects essential for the large beams under consideration, and availability of built-in optimization tools. WARP was chosen for its space charge calculation capabilities, speed and flexibility of implementing new lattice elements such as RF cavities. This final technical report summarizes the efforts on implementing advanced new tools in these computer codes addressing the shortcomings in modeling muon physics processes and using these tools to model muon ionization cooling channels.

43 PARTICLE ACCELERATORS↗

Issue Summary of INL Phase IV Transient Results for IAEA CRP on HTGR UAM Benchmark

This report details the Parallel and Highly Innovative Simulation for Idaho National Laboratory (INL) Code System (PHISICS)/Reactor Excursions and Leak Analysis Program (RELAP5)-3D results obtained for the transient core exercises defined for Phase IV of the International Atomic Energy Agency (IAEA) Coordinated Research Project (CRP) on high-temperature gas cooled reactor (HTGR) uncertainty analysis in modeling (UAM). The Phase III models and results are linked to the earlier Standardized Computer Analyses for Licensing Evaluation (SCALE)/Sampler/New ESC-based Weighting Transport (NEWT) data generated for the lattice physics (lattice) stage Phase I of the CRP. The focus of this report is the Uncertainty/Sensitivity Assessment (U/SA) of the prismatic modular high-temperature gas cooled reactor (MHTGR)-350 design, and specifically for Exercises IV-1 and IV-2 of the benchmark: the Control Rod Withdrawal (CRW) and Pressurised Loss of Cooling (PLOFC) events. The statistical U/SA methodology is implemented and demonstrated using the RAVEN code, based on perturbed cross-section libraries obtained from the SCALE/Sampler sequence. Uncertainties in nuclear data (cross-sections and the average number of neutrons produced per fission, 235U[¯v ]) lead to standard deviations (uncertainties of one s) of approximately 0.5% in the core eigenvalues of the MHTGR-350 and core models. For the coupled neutronics/thermal fluid model, local power density uncertainties up to 3.6% were observed in the colder regions of the core, while the local maximum fuel temperature uncertainties reached 1.5% for the models that included thermal fluid uncertainties. The addition of thermal fluid uncertainties dominated the impacts of nuclear data uncertainties in all cases. The main contributors to uncertainties in the power density and fuel temperatures during the transients were uncertainties in the reactor operating conditions (total power, inlet mass flow rate and inlet gas temperature). Variations in the bypass flows did not have significant impact on any of the output variables. For the nuclear data uncertainties it was found that the 235U(¯v ) / 235U(¯v ) covariance produced the largest sensitivities in terms of its impact on the eigenvalue and peak reactor power. It was also observed that the impact of any nuclear data uncertainties on the maximum fuel temperature was much less significant that the impact on eigenvalue and power. Another important finding was that although the use of eight or more energy groups is recommended for best-estimate HTGR simulation, two-group models produced acceptable uncertainty and sensitivity results for most FOMs. Since the statistical U/SA methodology is computationally expensive, and most transient solver requirements will scale directly with the number of energy groups, two energy groups could be used by HTGR developers during the early stages of design when larger uncertainty margins can be tolerated.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

CFD modeling of turbulent air flow in self-heated gyroid TPMS structures: Thermal-hydraulic performance and validation

The application of mathematically derived geometries, such as triply periodic minimal surface (TPMS) lattices, has garnered significant interest across various fields, including the nuclear sector, due to their superior thermal-hydraulic characteristics for heat transfer compared to traditional plain or finned tubes. Here, this study validates a computational fluid dynamics (CFD) model, evaluates different turbulence models and CFD model settings, and performs uncertainty quantification to provide a comprehensive analysis. Despite extensive research on CFD modeling of TPMS lattices, such as gyroid and diamond geometries, there is a notable lack of publicly available literature providing comprehensive details on numerical analysis aspects, including convergence and methodological best practices. This study embarks on a benchmark analysis of a gyroid geometry to evaluate its thermal-hydraulic performance under turbulent flow conditions and scrutinize various CFD model configurations. The main contributions of this work include validating the CFD model, assessing and comparing different turbulence models, and enhancing pressure drop and temperature prediction capabilities. The results aim to support the development of methodologies needed to benchmark and enhance numerical analysis techniques for TPMS lattices. This work seeks to complement the existing body of knowledge, support the development of TPMS reactor concepts, and improve best practices for CFD modeling of TPMS lattices, ultimately advancing methodologies to support future applications in this domain.

22 - GENERAL STUDIES OF NUCLEAR REACTORS↗

Coupled numerical approach combining finite volume and lattice Boltzmann methods for multi-scale multi-physicochemical processes

A coupled (hybrid) simulation strategy spatially combining the finite volume method (FVM) and the lattice Boltzmann method (LBM), called CFVLBM, is developed to simulate coupled multi-scale multi-physicochemical processes. In the CFVLBM, computational domain of multi-scale problems is divided into two sub-domains, i.e., an open, free fluid region and a region filled with porous materials. The FVM and LBM are used for these two regions, respectively, with information exchanged at the interface between the two sub-domains. A general reconstruction operator (RO) is proposed to derive the distribution functions in the LBM from the corresponding macro scalar, the governing equation of which obeys the convection–diffusion equation. The CFVLBM and the RO are validated in several typical physicochemical problems and then are applied to simulate complex multi-scale coupled fluid flow, heat transfer, mass transport, and chemical reaction in a wall-coated micro reactor. The maximum ratio of the grid size between the FVM and LBM regions is explored and discussed. -- Highlights: •A coupled simulation strategy for simulating multi-scale phenomena is developed. •Finite volume method and lattice Boltzmann method are coupled. •A reconstruction operator is derived to transfer information at the sub-domains interface. •Coupled multi-scale multiple physicochemical processes in micro reactor are simulated. •Techniques to save computational resources and improve the efficiency are discussed.

97 MATHEMATICS AND COMPUTING↗

Reweighting QCD simulations with dynamical overlap fermions

I apply a recently developed algorithm for reweighting simulations of lattice QCD from one quark mass to another to simulations performed with overlap fermions in the epsilon regime. I test it by computing the condensate from distributions of the low-lying eigenvalues of the Dirac operator. Results seem favorable, when the difference of squared masses is small.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Advances in Supercomputing for the Modeling of Atomic Processes in Plasmas

An overview will be given of recent atomic and molecular collision methods developed to take advantage of modern massively parallel computers. The focus will be on direct solutions of the time-dependent Schroedinger equation for simple systems using large numerical lattices, as found in the time-dependent close-coupling method, and for configuration interaction solutions of the time-independent Schroedinger equation for more complex systems using large numbers of basis functions, as found in the R-matrix with pseudo-states method. Results from these large scale calculations are extremely useful in benchmarking less accurate theoretical methods and experimental data. To take full advantage of future petascale and exascale computing resources, it appears that even finer grain parallelism will be needed.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

First-principles calculation of lattice distortion, electronic structure, and bonding properties of GeTe-based and PbSe-based high-entropy chalcogenides

The massive amount of wasted heat energy from industry has pushed the development of thermoelectric (TE) materials that directly convert heat into electricity to a new level of concern. Recently, multicomponent alloys such as GeTe-based and PbSe-based high-entropy (HE) chalcogenides have attracted a great deal of attention due to their potential application as TE materials. The nature of the interatomic bonding, lattice distortion (LD), and the electronic structure in this class of materials is not fully understood. Herein, we report a comprehensive computational investigation of nine GeTe-based HE alloys with eight metallic elements (Ag, Pb, Sb, Bi, Cu, Cd, Mn, and Sn) with large supercells of 1080 atoms each; seven PbSe-based HE solid solutions: Pb0.99−ySb0.012SnySe1−2xTexSx (x = 0.1, 0.2, 0.25, 0.3, 0.35, 0.4, 0.45, with y = 0) with supercells of 1000 atoms each; and five Pb0.99−ySb0.012SnySe1−2xTexSx (y = 0.05, 0.1, 0.15, 0.2, 0.25 with x = 0.25) solid solutions with supercells of 1000 atoms each. All these HE models are theoretically investigated for the first time. The electronic structure, interatomic bonding, charge transfer, and lattice distortion (LD) are investigated by first-principles calculations based on density functional theory. Multicomponent HE alloys can cause a significant LD, which affects their mechanical, thermal, and TE properties. The calculations for the GeTe-based HE chalcogenides showed that they are semiconductors with a narrow bandgap, except for m8, which has a semi-metallic characteristic, and this makes them good candidates for TE applications. For most of these models, the Fermi level shifts upward and locates deeply in the conduction bands, resulting in the enhancement of the electrical conductivity (σ). The bonding properties showed that most bonds in m5 are more dispersed, indicating highest LD and lower lattice thermal conductivity. For PbSe-based HE solid solutions, the LD calculations showed that the models Pb0.99Sb0.012Se0.5Te0.25S0.25 and Pb0.89Sb0.012Sn0.1Se0.5Te0.25S0.25 have the higher LD, and thus a lower lattice thermal conductivity. Such investigations are in high demand since it enables us to design new HE chalcogenides for TE applications. We use the novel concept of total bond order density as a single quantum mechanical metric to characterize the internal cohesion of these HE alloys and correlate with calculated properties, especially the mechanical properties. This work provides a solid database for HE chalcogenides and a road map for many potential applications. Moreover, the computational procedure we developed can be used to design new HE chalcogenides for specific TE applications.

Physics↗

Relativistic calculation of the pion loop correlation energy in nuclear matter in a theory including confinement

We present a relativistic calculation of the saturation properties of nuclear matter which contains the correlation energy. Pion loops are incorporated on top of a relativistic Hartree-Fock (RHF) approach based on a chiral theory. It includes the effect of nucleon structure through its response to the background chiral invariant scalar field. All the parameters which enter the RHF calculation are fixed or strongly constrained by hadron phenomenology or lattice data. The new input for the correlation energy is the Landau-Migdal parameter g{sup '} governing the short-range part of the spin-isospin interaction. We find that the inclusion of the correlation energy improves the description of the saturation properties of nuclear matter.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Perturbative determination of c{sub SW} for plaquette and Symanzik gauge action and stout link clover fermions

Using plaquette and Symanzik improved gauge action and stout link clover fermions we determine the improvement coefficient c{sub SW} in one-loop lattice perturbation theory from the off-shell quark-quark-gluon three-point function. In addition, we compute the coefficients needed for the most general form of quark field improvement and present the one-loop result for the critical hopping parameter {kappa}{sub c}. We discuss mean field improvement for c{sub SW} and {kappa}{sub c} and the choice of the mean field coupling for the actions we have considered.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Charged Hadron Properties in Background Electric Fields

We report on a lattice calculation demonstrating a novel new method to extract the electric polarizability of charged pseudo-scalar mesons by analyzing two point correlation functions computed in classical background electric fields.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Computational Studies of Solubilities of LiO 2 and Li 2 O 2 in Aprotic Solvents

Knowledge of the solubilities of Li 2 O 2 and LiO 2 in aprotic solvents is important for insight into the discharge and charge processes of Li-O 2 batteries, but these quantities are not well known. In this contribution, the solvation free energies of molecular LiO 2 and Li 2 O 2 in various organic solvents were calculated using various explicit and implicit solvent models, as well as ab initio molecular dynamics (AIMD) methods. Best estimates for the solvation energies from these calculations along with calculated lattice energies of Li 2 O 2 and LiO 2 were used to determine the solubility of bulk LiO 2 and Li 2 O 2 . The computed solubility of LiO 2 (1.8 × 10 -2 M) is about 15 orders higher than that of Li 2 O 2 (2.0 × 10 -17 M) due to a much less negative lattice energy of bulk LiO 2 compared to that of Li 2 O 2 . The difference in solubilities between LiO 2 and Li 2 O 2 likely will affect the nucleation and growth mechanisms and resulting morphologies of the products formed during battery discharge, influencing the performance of the battery cell. In conclusion, the calculated LiO 2 and Li 2 O 2 solubilities provide important information for fundamental studies of discharge and charge chemistries in Li-O 2 batteries.

25 ENERGY STORAGE↗

Connected and leading disconnected hadronic light-by-light contribution to the muon anomalous magnetic moment with a physical pion mass

We report a lattice QCD calculation of the hadronic light-by-light contribution to the muon anomalous magnetic moment at a physical pion mass. The calculation includes the connected diagrams and the leading, quark-line-disconnected diagrams. We incorporate algorithmic improvements developed in our previous work. The calculation was performed on the 48 3 × 96 ensemble generated with a physical pion mass and a 5.5 fm spatial extent by the RBC and UKQCD Collaborations using the chiral, domain wall fermion formulation. We find a HLbL μ = 5.35(1.35) × 10 –10 , where the error is statistical only. The finite-volume and finite lattice-spacing errors could be quite large and are the subject of ongoing research. Finally, the omitted disconnected graphs, while expected to give a correction of order 10%, also need to be computed.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Determination of B*B{pi} coupling in unquenched lattice QCD

The B*B{pi} coupling is a fundamental parameter of chiral effective Lagrangian with heavy-light mesons and can constrain the chiral behavior of f{sub B}, B{sub B}, and the B{yields}{pi}l{nu} form factor in the soft pion limit. We compute the B*B{pi} coupling with the static heavy quark and the O(a)-improved Wilson light quark. Simulations are carried out with n{sub f}=2 unquenched 12{sup 3}x24 lattices at {beta}=1.80 and 16{sup 3}x32 lattices at {beta}=1.95 generated by the CP-PACS collaboration. To improve the statistical accuracy, we employ the all-to-all propagator technique and the static quark action with smeared temporal link variables. These methods successfully work also on unquenched lattices, and determine the B*B{pi} coupling with 1%-2% statistical accuracy on each lattice spacing.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Neutron electric polarizability from unquenched lattice QCD using the background field approach

A calculational scheme for obtaining the electric polarizability of the neutron in lattice QCD with dynamical quarks is developed, using the background field approach. The scheme differs substantially from methods previously used in the quenched approximation, the physical reason being that the QCD ensemble is no longer independent of the external electromagnetic field in the dynamical quark case. One is led to compute (certain integrals over) four-point functions. Particular emphasis is also placed on the physical role of constant external gauge fields on a finite lattice; the presence of these fields complicates the extraction of polarizabilities, since it gives rise to an additional shift of the neutron mass unrelated to polarizability effects. The method is tested on a SU(3) flavor-symmetric ensemble furnished by the MILC Collaboration, corresponding to a pion mass of m{sub {pi}}=759 MeV. Disconnected diagrams are evaluated using stochastic estimation. A small negative electric polarizability of {alpha}=(-2.0{+-}0.9){center_dot}10{sup -4} fm{sup 3} is found for the neutron at this rather large pion mass; this result does not seem implausible in view of the qualitative behavior of {alpha} as a function of m{sub {pi}} suggested by chiral effective theory.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Determining Catalytically Relevant Surfaces through Coverage-Dependent Lattice Gas Models: Carbon Adsorption on Fe(100)

Here, we have quantified the C–C lateral interactions on Fe(100) using a density functional theory (DFT)-parameterized lattice gas cluster expansion (LG CE) model trained using 265 unique configurations spanning a C coverage from 0 to 1 monolayer (ML). Our LG CE model shows high predictive accuracy with a leave-multiple-out cross-validation score of 10.2 and 16.6 meV/site for systems with and without the top two layers of Fe atoms fixed, respectively. Electronic ground-state structures identified from the lattice gas model (including the structures at 0 and 1 monolayers) were further used to generate ab initio phase diagrams under a range of temperatures and pressures. At low temperatures (<400 K), we found that the 1.0 monolayer structure is dominant, whereas at higher temperatures (>500 K), the 0.88 ML structure is most likely to form on the Fe surface. Interestingly, our model identified a c (2 × 2) ordered structure at 1/2 ML, which correlates well with previous DFT studies for carbon adsorption on iron surfaces and matches with the experimentally observed low-energy electron diffraction structure. Overall, the DFT-parameterized energies for the C/Fe system including effects of coverage and configurational space can further help in developing multiscale models for various heterogeneous reactions involving C–C and C–Fe interactions.

08 HYDROGEN↗