Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Complex Loading”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,297 records · Page 72

Fabrication of the HFVMTF Double-Bath Cryostat

The High Field Vertical Magnet Test Facility (HFVMTF) at Fermilab is designed to test superconducting magnets up to 20 tons and 1.3 meters in diameter. Central to the facility is a double-bath superfluid helium cryostat reaching 1.8 K at 1.2 bar. Integrated with a 15 T superconducting dipole from LBNL, HFVMTF supports HTS cable testing for fusion applications. This paper presents the design and fabrication of the cryostat, with a focus on two complex components: the 2 K heat exchanger and the lambda plate. The heat exchanger thermally links sub-atmospheric and pressurized helium baths. The 1.4-meter lambda plate provides thermal isolation and structural support for over 20 tons under 1.3 bar pressure differential. Finite Element Analysis validated the vessel's integrity under maximum load conditions.

Bruce, R. [Fermilab] (ORCID:0000000234200612)↗

TIME-SPECTRAL ANALYSIS ALGORITHMS FOR LEAD SLOWING-DOWN SPECTROSCOPY OF SPENT FUEL

Nondestructively determining the plutonium content in spent fuel assemblies continues to be a considerable challenge in the safeguarding of nuclear fuel cycles. Motivating needs for such measurements include quantifying material input at a reprocessing facility, determining the shipper-receiver difference, and recovering continuity of knowledge. A nondestructive assay (NDA) technology that could provide timely (tens of minutes), independent (no operator-declared information), and direct measurement of Pu mass that improves upon the uncertainty of today’s confirmatory methods would be a major step forward for spent fuel materials accountability. Lead slowing-down spectroscopy (LSDS) is one potential fuel assay technique; previous work has indicated promise of the method for specific fuel types and assay assumptions. In this work, the focus is the assay of pressurized water reactor assemblies over a wide burnup range, under the following assumptions: a) No a priori information (e.g. initial loading or burnup) is available about the assembly, and b) No pre-existing calibration generated from the measurement of many similar assemblies is available. The technical emphasis of this paper is the development of time-spectral analysis algorithms for LSDS that can extract as much isotopic information as possible from the complex, but content-rich assay signal. The key advancement described here is a mathematical relationship to account for self-shielding created by the fissile isotopes and the effects of neutron-absorbing fission and activation products. This formulation utilizes the known energy-dependent cross-sections from key isotopes, but leaves their mass as free variables. Multi-parameter regression analysis is used to directly calculate not only the mass of fissile isotopes in the fuel assembly (e.g. Pu-239, U-235 and Pu-241), but also the mass of key absorbing isotopes such as Pu-240 and U-238. Preliminary results, using a first-order self-shielding relationship, indicate that LSDS has the potential to directly measure total Pu with less than 5% average relative error, over a burnup range from 0 to 60 GWd/MTU. Assay of U-235 and U-238 is also possible, though with higher uncertainties. Deficiencies in the self-shielding model and methods to improve that formulation are described, along with application of the method to a wider range of fuel types and burnups.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Cross‐Coupling between Hydrazine and Aryl Halides with Hydroxide Base at Low Loadings of Palladium by Rate‐Determining Deprotonation of Bound Hydrazine

Abstract Reported here is the Pd‐catalyzed C–N coupling of hydrazine with (hetero)aryl chlorides and bromides to form aryl hydrazines with catalyst loadings as low as 100 ppm of Pd and KOH as base. Mechanistic studies revealed two catalyst resting states: an arylpalladium(II) hydroxide and arylpalladium(II) chloride. These compounds are present in two interconnected catalytic cycles and react with hydrazine and base or hydrazine alone to give the product. The selectivity of the hydroxide complex with hydrazine to form aryl over diaryl hydrazine was lower than that of the chloride complex, as well as the catalytic reaction. In contrast, the selectivity of the chloride complex closely matched that of the catalytic reaction, indicating that the aryl hydrazine is derived from this complex. Kinetic studies showed that the coupling process occurs by rate‐limiting deprotonation of a hydrazine‐bound arylpalladium(II) chloride complex to give an arylpalladium(II) hydrazido complex.

Wang, Justin Y.↗

Cross‐Coupling between Hydrazine and Aryl Halides with Hydroxide Base at Low Loadings of Palladium by Rate‐Determining Deprotonation of Bound Hydrazine

Abstract Reported here is the Pd‐catalyzed C–N coupling of hydrazine with (hetero)aryl chlorides and bromides to form aryl hydrazines with catalyst loadings as low as 100 ppm of Pd and KOH as base. Mechanistic studies revealed two catalyst resting states: an arylpalladium(II) hydroxide and arylpalladium(II) chloride. These compounds are present in two interconnected catalytic cycles and react with hydrazine and base or hydrazine alone to give the product. The selectivity of the hydroxide complex with hydrazine to form aryl over diaryl hydrazine was lower than that of the chloride complex, as well as the catalytic reaction. In contrast, the selectivity of the chloride complex closely matched that of the catalytic reaction, indicating that the aryl hydrazine is derived from this complex. Kinetic studies showed that the coupling process occurs by rate‐limiting deprotonation of a hydrazine‐bound arylpalladium(II) chloride complex to give an arylpalladium(II) hydrazido complex.

Wang, Justin Y.↗

Structural Evaluation of Complex Subcomponents Manufactured by Large Scale Extrusion Deposition of Carbon Fiber Reinforced ABS

The large scale extrusion deposition process has recently been commercialized in the form of additive manufacturing machines such as the BAAM from Cincinnati Inc., which enables layered production of chopped fiber reinforced thermoplastic polymer systems. The application of this process to the automotive market is being pursued by Local Motors to enable rapid design to market cycles and build on-demand capability for a wide range of vehicle styles from a distributed network of micro-factories. This endeavor will require an understanding of the structural performance of components with complex geometries, where the properties are known to vary as a function of printing conditions, as well as orientation and shape. In order to rapidly build a database of structural performance, a beam specimen with outer dimensions of 914 x 305 x 64 mm3 was selected to be subjected to bending, torsion, and shear loading with full field displacement measurement by digital image correlation (DIC). A total of 25 different specimen configurations were designed including variation of print geometry, reinforcement by foam filling, and overwrapping with advanced composites. This work documents the results of the study and presents the relative performance of the structures in addition to the approach to simulation that is being initiated to serve as a framework for efficient design of structures manufactured in this way. The results are presented as a table of structural efficiency including stiffness and strength as functions of mass for each design. Additional results will also be provided in the form of surface displacements from DIC; future work will utilize this data to better optimize simulations for predicting structural performance of articles manufactured by this process.

Bedsole, Robert↗

Latest Results from DIII-D and Their Implications for Future Devices

The DIII-D Tokamak has become one of the major sources of physics and technology data for the design of future large machines such as ITER and CIT. In large part this is because of its extremely flexible design and the ability to run tests or add new diagnostic devices with a minimum of down-time and expense. Fundamental plasma physics studies are still the major focus of our experimental program, but increasingly, we are looking at new ways to answer the complex fusion technology questions emerging from the design studies for the next-generation devices. Recent results have demonstrated world record beta plasmas, long quiescent H-mode operation, partial noninductive current drive using both neutral beam and rf power injection, single- and double-null divertor operation, and divertor particle- and heat-load management. The recently installed Advanced Divertor hardware will allow critical transport experiments to be run with independent control of the density. It will also permit the concept of dc helicity injection current drive to be tested. This paper summarizes our most important recent findings and also outlines a few of the many interesting problems that are now under study to address fusion technology questions.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Crystallization in High-Level Waste Glass: A Review of Glass Theory and Noteworthy Literature

There is a fundamental need to continue research aimed at understanding nepheline and spinel crystal formation in high-level waste (HLW) glass. Specifically, the formation of nepheline solids (K/NaAlSiO 4 ) during slow cooling of HLW glass can reduce the chemical durability of the glass, which can cause a decrease in the overall durability of the glass waste form. The accumulation of spinel solids ((Fe, Ni, Mn, Zn)(Fe, Cr) 2 O 4 ), while not detrimental to glass durability, can cause an array of processing problems inside HLW glass melters. In this review, the fundamental differences between glass and solid-crystals are explained using kinetic, thermodynamic, and viscosity arguments, and several highlights of glass-crystallization research, as it pertains to high-level waste vitrification, are described. In terms of mitigating spinel in the melter and both spinel and nepheline formation in the canister, the complexity of HLW glass and the intricate interplay between thermal, chemical, and kinetic factors further complicates this understanding. However, new experiments seeking to elucidate the contributing factors of crystal nucleation and growth in waste glass, and the compilation of data from older experiments, may go a long way towards helping to achieve higher waste loadings while developing more efficient processing strategies. Higher waste loadings and more efficient processing strategies will reduce the overall HLW Hanford Tank Waste Treatment and Immobilization Plant (WTP) vitrification facilities mission life.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Crystallization in High-Level Waste Glass: A Review of Glass Theory and Noteworthy Literature

There is a fundamental need to continue research aimed at understanding nepheline and spinel crystal formation in high-level waste (HLW) glass. Specifically, the formation of nepheline solids (K/NaAlSiO 4 ) during slow cooling of HLW glass can reduce the chemical durability of the glass, which can cause a decrease in the overall durability of the glass waste form. The accumulation of spinel solids ((Fe, Ni, Mn, Zn)(Fe,Cr) 2 O 4 ), while not detrimental to glass durability, can cause an array of processing problems inside of HLW glass melters. In this review, the fundamental differences between glass and solid-crystals are explained using kinetic, thermodynamic, and viscosity arguments, and several highlights of glass-crystallization research, as it pertains to high-level waste vitrification, are described. In terms of mitigating spinel in the melter and both spinel and nepheline formation in the canister, the complexity of HLW glass and the intricate interplay between thermal, chemical, and kinetic factors further complicates this understanding. However, new experiments seeking to elucidate the contributing factors of crystal nucleation and growth in waste glass, and the compilation of data from older experiments, may go a long way towards helping to achieve higher waste loadings while developing more efficient processing strategies. Higher waste loadings and more efficient processing strategies will reduce the overall HLW Hanford Tank Waste Treatment and Immobilization Plant (WTP) vitrification facilities mission life.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Combined Space and Water Heating: Next Steps to Improved Performance

A combined space- and water-heating (combi) system uses a high-efficiency direct-vent burner that eliminates safety issues associated with natural draft appliances. Past research with these systems shows that using condensing water heaters or boilers with hydronic air handling units can provide both space and water heating with efficiencies of 90% or higher. Improved controls have the potential to reduce complexity and improve upon the measured performance. This project demonstrates that controls can significantly benefit these first-generation systems. Laboratory tests and daily load/performance models showed that the set point temperature reset control produced a 2.1%-4.3% (20-40 therms/year) savings for storage and hybrid water heater combi systems operated in moderate-load homes.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗

Combined Space and Water Heating: Next Steps to Improved Performance

A combined space- and water-heating (combi) system uses a high-efficiency direct-vent burner that eliminates safety issues associated with natural draft appliances. Past research with these systems shows that using condensing water heaters or boilers with hydronic air handling units can provide both space and water heating with efficiencies of 90% or higher. Improved controls have the potential to reduce complexity and improve upon the measured performance. This project demonstrates that controls can significantly benefit these first-generation systems. Laboratory tests and daily load/performance models showed that the set point temperature reset control produced a 2.1%–4.3% (20–40 therms/year) savings for storage and hybrid water heater combi systems operated in moderate-load homes. The full modulation control showed additional savings over set point control (in high-load homes almost doubling the savings: 4%–5% over the no-control case). At the time of installation the reset control can be implemented for $200–$400, which would provide paybacks of 6–25 years for low-load houses and 3–15 years for high-load houses. Full modulation implementation costs would be similar to the outdoor reset and would provide paybacks of 5-½–20 years for low-load houses and 2-½–10 years for high-load houses.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗

Integrated EM & Thermal Simulations with Upgraded VORPAL Software

Nuclear physics accelerators are powered by microwaves which must travel in waveguides between room-temperature sources and the cryogenic accelerator structures. The ohmic heat load from the microwaves is affected by the temperature-dependent surface resistance and in turn affects the cryogenic thermal conduction problem. Integrated EM & thermal analysis of this difficult non-linear problem is now possible with the VORPAL finite-difference time-domain simulation tool. We highlight thermal benchmarking work with a complex HOM feed-through geometry, done in collaboration with researchers at the Thomas Jefferson National Accelerator Laboratory, and discuss upcoming design studies with this emerging tool. This work is part of an effort to generalize the VORPAL framework to include generalized PDE capabilities, for wider multi-physics capabilities in the accelerator, vacuum electronics, plasma processing and fusion R&D fields, and we will also discuss user interface and algorithmic upgrades which facilitate this emerging multiphysics capability.

43 PARTICLE ACCELERATORS↗

GLIMPSE of Future Power Grid Models

Power grid is one of the critical national infrastructures with social, economics, and national security impacts. Particularly, power distribution systems represent part of the infrastructure between power distribution substations and customers such as residential, commercial, and industrial. To address various grid modernization challenges, state-of-the-art algorithms and methodologies have been developed to deploy, operate, and expand a secure and resilient power grid. At the same time, there is a need to develop capabilities to assist power grid stakeholders to quickly get insight into the design and structure of the grid. Data visualization is a key approach to comprehend and understand complex systems such as the power grid. We present GLIMPSE Grid Layout Interface for Model Preview and System Exploration), a graph-based semantic-aware application to visualize and update distribution power grid models. The GLIMPSE can be used with standard IEEE models to search and highlight power grid objects such as generators, loads, overhead lines, etc. Additionally, it supports updating attributes and model export to integrate with GridLAB-D simulations.

Cybersecurity, power grid, visualization↗

Elevated aerosol layers modify the O2–O2 absorption measured by ground-based MAX-DOAS

The oxygen collisional complex (O2-O2, or O4) is a greenhouse gas, and a calibration trace gas used to infer aerosol and cloud properties by Differential Optical Absorption Spectroscopy (DOAS). Recent reports suggest the need for an O4 correction factor (CFO4) when comparing simulated and measured O4 differential slant column densities (dSCD) by passive DOAS. We investigate the sensitivity of O4 dSCD simulations at ultraviolet (360 nm) and visible (477 nm) wavelengths towards separately measured aerosol extinction profiles. Measurements were conducted by the University of Colorado 2D-MAX-DOAS instrument and NASA’s multispectral High Spectral Resolution Lidar (HSRL-2) during the Two Column Aerosol Project (TCAP) at Cape Cod, MA in July 2012. During two case study days with (1) high aerosol load (17 July, AOD ~ 0.35 at 477 nm), and (2) near molecular scattering conditions (22 July, AOD < 0.10 at 477 nm) the measured and calculated O4 dSCDs agreed within 6.4±0.4% (360 nm) and 4.7±0.6% (477 nm) if the HSRL-2 profiles were used as input to the calculations. However, if in the calculations the aerosol is confined to the surface layer (while keeping AOD constant) we find 0.53<CFO4<0.75, similar to previously reported CFO4. Our results suggest that elevated aerosol layers, unless accounted for, can cause negative bias in the simulated O4 dSCDs that can explain CFO4. The air density and aerosol profile aloft needs to be taken into account when interpreting the O4 from ground-based MAX-DOAS. Opportunities to identify and better characterize these layers are also discussed.

54 ENVIRONMENTAL SCIENCES↗

Pore-scale study of effects of macroscopic pores and their distributions on reactive transport in hierarchical porous media

For applications of reactive transport in porous media, optimal porous structures should possess both high surface area for reactive sites loading and low mass transport resistance. Hierarchical porous media with a combination of pores at different scales are designed for this purpose. In this paper, using the lattice Boltzmann method, pore-scale numerical studies are conducted to investigate diffusion-reaction processes in 2D hierarchical porous media generated by self-developed reconstruction scheme. Complex interactions between porous structures and reactive transport are revealed under different conditions. Simulation results show that adding macropores can greatly enhance the mass transport, but at the same time reduce the reactive surface, leading to complex change trend of the total reaction rate. Effects of gradient distribution of macropores within the porous medium are also investigated. It is found that a front-loose, back-tight (FLBT) hierarchical structure is desirable for enhancing mass transport, increasing total reaction rate, and improving catalyst utilization. Finally, on the whole, from the viewpoint of reducing cost and improving material performance, hierarchical porous structures, especially gradient structures with the size of macropores gradually decreasing along the transport direction, are desirable for catalyst application.

42 ENGINEERING↗

Enabling scientific machine learning in MOOSE using Libtorch

A neural-network-based machine learning interface has been developed for the Multiphysics Object-Oriented Simulation Environment (MOOSE). The interface relies on Libtorch, the C++ front-end of PyTorch, and enables an online interaction between modern machine learning algorithms and all the existing simulation, modeling, and analysis processes available in MOOSE. New capabilities in MOOSE include the native generation and training of artificial neural networks together with options to load pretrained neural networks in TorchScript format. Furthermore, the MOOSE stochastic tools module (MOOSE-STM) has been enhanced with neural network-based surrogate and reduced-order model generation options for efficient stochastic analyses. Lastly, a reinforcement learning capability has been added to MOOSE-STM for the interactive control and optimization of complex multiphysics problems.

97 MATHEMATICS AND COMPUTING↗

Micellar Mimicry of Intermetallic C14 and C15 Laves Phases by Aqueous Lyotropic Self-Assembly

Concentration-dependent supramolecular self-assembly of amphiphilic molecules in water furnishes a variety of nanostructured lyotropic liquid crystals (LLCs), which typically display high symmetry bicontinuous network and discontinuous micellar morphologies. Aqueous dispersions of soft spherical micelles derived from small molecule amphiphile hydration typically pack into exemplary body-centered cubic and closest-packed LLCs. However, investigations of hydrated mixtures of the ionic surfactant tetramethylammonium decanoate loaded with 40 wt % n-decane (TMADec-40) revealed the formation of a high symmetry bicontinuous double diamond LLC, as well as cubic C15 and hexagonal C14 Laves LLC phases that mirror the MgCu 2 and MgZn 2 intermetallic structure types, respectively. Detailed small-angle X-ray scattering analyses demonstrate that the complex C15 and C14 LLCs exhibit large unit cells, in which 12 or more ~3–4 nm diameter micelles of multiple discrete sizes arrange into tetrahedral close packing arrangements with exceptional long-range translational order. The symmetry breaking that drives self-assembly into these low-symmetry LLC phases is rationalized in terms of a frustrated balance between maximizing counterion-mediated micellar cohesion within the ensemble of oil-swollen particles, while simultaneously optimizing local spherical particle symmetry to minimize molecular-level variations in surfactant solvation.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Multiphase Control for Robust and Complete Soft-Charging Operation of Dual Inductor Hybrid Converter

This paper presents a new Multiphase Dual Inductor Hybrid (MP-DIH) Converter for application in data center and telecommunication systems. The converter is based on addition of two output filter inductors to a Dickson switched-capacitor converter. The inductors are operated in multiple phases that are non-overlapped and evenly distributed over one switching cycle, completely soft-charging all flying capacitors even in the presence of practical capacitor mismatches and voltage ripples. In this converter operation, each branch of the switched-capacitor network is activated individually in one charging phase, and two interleaved inductors are employed to softly charge and discharge the capacitors to achieve high efficiency without any complex capacitor sizing or split phase operation. To verify the topology and its soft-charging advantages, a 48V-to-1.8V 20W experimental converter prototype is constructed. The converter achieves 92.4% peak efficiency for 40V-to-1.8V conversion and 92.1% peak efficiency for 48V-to-1.8V conversion at 4A load, and with 20% capacitance variations.

24 POWER TRANSMISSION AND DISTRIBUTION↗