Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Charging Data”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,297 records · Page 72
All sourcesNASA NTRSDOE OSTI
NASA NTRS2006

Effects of Hydrogen on GRCop-84

This report is a section of the final report on the GRCop-84 task of the Constellation Program and incorporates the results obtained between October 2000 and September 2005 when the program ended. GRCop-84 contains approximately 5.5 wt% Nb. Nb can react with H and embrittle easily. Previous work had indicated the thermodynamic possibility that Cr 2 Nb could react with H and form niobium hydrides in the presence of high pressure H such as seen in the Space Shuttle Main Engine. In this study, samples were charged with H and then tested in both high pressure H and He environments to determine if measurable differences existed which indicate that hydrogen embrittlement occurs in GRCop-84. Tensile, notched tensile, stress rupture and low cycle fatigue properties were surveyed. High pressure H environment stress rupture testing resulted in a lower reduction in area than a high pressure He environment, and the LCF lives at high strain ranges fall below the lower 95 percent confidence interval for the baseline data, but in general no significant differences were noted either between H and He environment tests or between hydrogen charged materials and the baseline, uncharged extruded GRCop-84 data sets. There was also no discernable evidence of the formation of hydrides or changes in fracture morphology indicating hydrogen embrittlement occurred.

Ellis, David L.↗
NASA NTRS2005

Retrieving Storm Electric Fields From Aircraft Field Mill Data. Part I: Theory

It is shown that the problem of retrieving storm electric fields from an aircraft instrumented with several electric field mill sensors can be expressed in terms of a standard Lagrange multiplier optimization problem. The method naturally removes aircraft charge from the retrieval process without having to use a high voltage stinger and linearly combined mill data values. It also allows a variety of user-supplied physical constraints (the so-called side constraints in the theory of Lagrange multipliers). Additionally, this paper introduces a novel way of performing the absolute calibration of an aircraft that has several benefits over conventional analyses. In the new approach, absolute calibration is completed by inspecting the time derivatives of mill and pitch data for a pitch down maneuver performed at high (greater than 1 km) altitude. In Part II of this study, the above methods are tested and then applied to complete a full calibration of a Citation aircraft.

Koshak, W. J.↗
NASA NTRS2006

Retrieving Storm Electric Fields from Aircraft Field Mill Data: Theory - Part 1

It is shown that the problem of retrieving storm electric fields from an aircraft instrumented with several electric field mill sensors can be expressed in terms of a standard Lagrange multiplier optimization problem. The method naturally removes aircraft charge from the retrieval process without having to use a high voltage stinger and linearly combined mill data values. It allows a variety of user-supplied physical constraints (the so-called side constraints in the theory of Lagrange multipliers) and also helps improve absolute calibration. Additionally, this paper introduces an alternate way of performing the absolute calibration of an aircraft that has some benefits over conventional analyses. It is accomplished by using the time derivatives of mill and pitch data for a pitch down maneuver performed at high (greater than 1 km) altitude. In Part II of this study, the above methods are tested and then applied to complete a full calibration of a Citation aircraft.

Koshak, W. J.↗
NASA NTRS2001

First Flight of the Advanced Thin Ionization Calorimeter (ATIC) Balloon Experiment

The ATILT instrument is designed to measure the composition and energy spectra of Z = 1 to 28 cosmic rays over the energy range -10 GeV - 100 TeV. ATIC was launched as a long duration test balloon flight on 12/28/00 local time from McMurdo, Antarctica. The operations preceding and during launch went very smoothly. During the first -20 hr while the instrument remained within line of sight (LOS), a full system check out was conducted, the experiment was operated in several test configurations, and all major tuning was completed. Preliminary analysis of the science data indicates that the overall detector system is functioning as expected. With our fully functioning analysis software we were able to monitor the data in nearly real time. Each event was reconstructed event-by-event to confirm the detector performance. The shower profiles indicate that the shower maximum location is deeper in the calorimeter for higher energy events, as expected. The energy spectra of protons, Helium nuclei, and "all particles" appear to follow power laws. Both the Si matrix and top scintillator layer of the charge module show clear charge separation for p and He. As the statistics increase, heavy nuclei charge separation will be evaluated. We will present preliminary results of the LOS data, as well as other data that will be available from the flight-data hard disk,

Case, G.↗
DOE OSTI2025

Online and Offline Data Quality Monitoring for the Mu2e Calorimeter

This thesis presents the design, implementation, and validation of a calorimeter Data Quality Monitoring (DQM) toolchain for the Mu2e experiment at Fermilab. Mu2e searches for charged lepton flavor violation via coherent muon-to-electron conversion in the field of an aluminum nucleus, $\mu^- Al \rightarrow e^-Al$, a process whose observation would constitute clear evidence of physics beyond the Standard Model. Achieving target sensitivity requires stringent control of detector performance and data integrity during acquisition, as subtle issues in readout configuration, data formatting, or electronics behavior can compromise reconstruction and bias downstream analyzes. To address these challenges, this work develops a multi-layer DQM approach spanning both raw data validation and reconstructed digi-level diagnostics. At the low level, a fragment analysis component performs word- and bit-field decoding of calorimeter readout blocks, enabling sanity checks of the expected structure and producing detailed error and integrity statistics useful for commissioning and troubleshooting. At the digi level, the CaloDigiDQM analyzer is implemented within the art framework and transforms each CaloDigiCollection into a structured hierarchy of ROOT histograms designed for fast drill-down diagnostics. The module generates coherent monitoring views at global, disk, board, and channel granularity, including occupancy, waveform-derived features (baseline, RMS, peak amplitude and position), and left-right sensor consistency metrics. Detector-aware channel-to-electronics mapping is performed through the conditions system (CaloDAQMap), ensuring that diagnostics remain aligned with hardware identifiers used in operations. For end-to-end testing without reliance on live DAQ data, a synthetic CaloDigi producer is developed to generate realistic waveforms with controlled noise and pulse shapes. The resulting system supports both offline ROOT-file production and online operation, including optional histogram streaming through otsdaq via ots::HistoSender. This toolchain provides a practical and scalable foundation for calorimeter commissioning and stable data collection, enabling early detection of anomalies and reducing operational risk for Mu2e.

Vakulenko, Mark [Drew U.] (ORCID:0009000276197818)↗
NASA NTRS2014

Comparisons Between Model Predictions and Spectral Measurements of Charged and Neutral Particles on the Martian Surface

Detailed measurements of the energetic particle radiation environment on the surface of Mars have been made by the Radiation Assessment Detector (RAD) on the Curiosity rover since August 2012. RAD is a particle detector that measures the energy spectrum of charged particles (10 to approx. 200 MeV/u) and high energy neutrons (approx 8 to 200 MeV). The data obtained on the surface of Mars for 300 sols are compared to the simulation results using the Badhwar-O'Neill galactic cosmic ray (GCR) environment model and the high-charge and energy transport (HZETRN) code. For the nuclear interactions of primary GCR through Mars atmosphere and Curiosity rover, the quantum multiple scattering theory of nuclear fragmentation (QMSFRG) is used. For describing the daily column depth of atmosphere, daily atmospheric pressure measurements at Gale Crater by the MSL Rover Environmental Monitoring Station (REMS) are implemented into transport calculations. Particle flux at RAD after traversing varying depths of atmosphere depends on the slant angles, and the model accounts for shielding of the RAD "E" dosimetry detector by the rest of the instrument. Detailed comparisons between model predictions and spectral data of various particle types provide the validation of radiation transport models, and suggest that future radiation environments on Mars can be predicted accurately. These contributions lend support to the understanding of radiation health risks to astronauts for the planning of various mission scenarios

Kim, Myung-Hee Y.↗
NASA NTRS1991

Electric field measurements during supercharging events on the MAIMIK rocket experiment

Data are presented on the evolution of electric field structures near the MAIMIK mother-daughter tethered rocket during active electron emissions from the rocket, which consisted of two separately instrumented payload sections which were detached in-flight. The results of the E field data analysis show that the temporal behavior of the fields was consistent with ion responses to the rapid charging of the active payload. A qualitative model of the interaction between the active payload and the ambient plasma background is developed to explain the electric field data, including the apparent causal relationship between the radial and tangential impulse components.

Denig, W. F.↗
DOE OSTI2026

EV Shuttle Bus Pilot

The EV Shuttle Bus Pilot dataset contains data and analysis from Hocking-Athens-Perry Community Action's demonstration of an electric bus on routes of their rural Athens Public Transit system. The vehicle used in the demonstration was a Ford E-450 cutaway equipped with an electric drivetrain, a 127-kWh battery system by Motiv Power Systems, and a cabin upfit by Turtle Top. Data gathered include route assignments, running time and distance, fuel economy, and charge cycles. A comparison of the vehicle's observed duty cycle with duty cycle modeling from other rural transit fleets in the National Transit Database is included to help better understand the rural adoption potential for this fleet technology.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗
NASA NTRS2000

The Response of the Ionospheric Cusp to the Solar Wind Through Two Perspectives: Low Energy Charged Particle In-Situ Measurements and Low-Energy Neutral Atom Imaging

The Imager for Magnetopause-to-Aurora Global Exploration (IMAGE) mission provides a new perspective on the study of the response of the magnetosphere/ionosphere system to changing solar wind conditions, particularly the variability of ion outflow. Learning to interpret this new type of data becomes an essential step in the process of melding these results with the wealth of in-situ charged particle observations obtained over the past 25 years. In order to understand how the in-situ data correspond to and contrast with IMAGE results we will perform a conjunctive study of event data from two instruments to shed light on the coupling of the solar wind and ionosphere from these different perspectives. We will use the Low Energy Neutral Atom instrument (LENA) which images energetic neutral atom emissions from upward flowing ionospheric ions and the Thermal Ion Dynamics Instrument (TIDE) on the Polar satellite which measures in-situ ion outflow from 0.3-300 eV. Our primary goal will be to understand how comparing the imaging and in-situ perspectives can aid in the analysis of both data sets.

Coffey, V. N.↗
DOE OSTI2024

Increased Static Charge–Induced Threshold Voltage Shifts and Memristor Activity in Pentacene OFETs Comprising Polystyrene–Based Gate Dielectrics Containing Electroactive Small Molecule Crystallites

Top-contact bottom-gate pentacene OFETs are fabricated with single layer dielectrics comprised of either polystyrene (PS), poly(4-methylstyrene) (P4MS), or poly(4-tert-butylstyrene) (P4TBS). The polystyrenes are blended with varying concentrations of two different small molecules, dibenzotetrathiafulvalene (DBTTF) and 2,8-difluoro-5,11-bis(triethylsilylethynyl)anthradithiophene (diF-TES-ADT), to form small, separated crystallites contained throughout the polymer dielectric layer. The OFET characteristics of these devices are investigated and their threshold voltage shifts are measured after –70 V static charging for 5 min. Two-terminal measurements are conducted using multiple different gate biases in the range of –50 to +50 V to investigate memristor behavior in the devices. OFETs containing DBTTF exhibited ΔVth increases as large as 330% relative to control OFETs containing no DBTTF, while OFETs containing at least 7.5 wt.% DBTTF exhibited memristor activity, with currents ranging from 20 nA to 44 µA depending on the applied bias. Furthermore, this work demonstrates that including small, separated crystallites in polymer dielectrics enhances their charge storage ability and can be promising for creating nonbinary memory devices for data processing. Additionally, the observed memristor activity indicates the OFETs in this work can be used in development of neuromorphic systems that aim to mimic the synaptic behavior of the human nervous system.

25 ENERGY STORAGE↗
NASA NTRS1998

Ion-Molecule Reactions and Ion Kinetics in DC Townsend Discharges in Dielectric Gases

In gas discharges the identify, transport, relative intensities, and kinetic energy distributions (KEDs) of ions may be dominated by ion-molecule reactions. In order to understand these discharges, there is a need for cross section data for various ion-molecule reactions, including symmetric and asymmetric charge-transfer, collisional detachment, and ion conversion reactions, especially for low to intermediate ion-impact energies. In view of the importance of dielectric gases, we have recently measured the KEDs of various positive and negative ions produced in DC Townsend discharges in SF6, CF4, CHF3, O2, and CO2. The relative abundance and mean energies of ions are obtained from the measured KEDs. The effective cross sections (Qeff) describing the KEDs of various ions can be derived by using the mean ion energies and the electric field-to-gas density ratios (E/N). In the case of SF6 and O2 discharges, the determined cross sections (Qeff) for the negative-ion molecule reactions are consistent with previously measured cross section data obtained by crossed-beam experiment. The availability of these cross section values enabled us to understand the ion data reasonably well. However, the lack of adequate cross section data for positive ions in all of the above gases is a major obstacle in understanding ion transport in these gas discharges.

Rao, M. V. V. S.↗
NASA NTRS1995

Space environmental effect on solar cells: LDEF and other flight tests

This paper summarizes results of several experiments flown on the Long Duration Exposure Facility (LDEF) to examine the effects of the space environment on materials and technologies to be used in solar arrays. The various LDEF experiments are compared to each other as well as to other solar cell flight data published in the literature. Data on environmental effects such as atomic oxygen, ultraviolet light, micrometeoroids and debris, and charged particles are discussed in detail. The results from the LDEF experiments allow us to draw several conclusions. Atomic oxygen erodes unprotected silver interconnects, unprotected Kapton, and polymer cell covers, but certain dielectric coatings can protect both silver and Kapton. Cells that had wrap-around silver contacts sometimes showed erosion at the edges, but more recently developed wrap-through cells are not expected to have these problems. Micrometeoroid and debris damage is limited to the area close to the impact, and microsheet covers provide the cells with some protection. Damage from charged particles was as predicted, and the cell covers provided adequate protection. In general, silicon cells with microsheet covers showed very little degradation, and solar modules showed less than 3 percent degradation, except when mechanically damaged. The solar cell choices for the Space Station solar array are supported by the data from LDEF.

Gruenbaum, Peter↗
DOE OSTI2025

Using Boosted Decision Trees to Select High Quality Measurements in the Mu2e Experiment at Fermilab

This thesis presents the implementation and evaluation of a Boosted Decision Tree (BDT) model to improve the selection of high-quality track measurements in the Mu2e experiment at Fermilab. The Mu2e experiment is a high-energy physics experiments seeking to observe a rare theoretical physics process known as Charged Lepton Flavor Violation. A significant challenge faced by the Mu2e experiment are so-called background events, which are events whose data mimics that of the rare physics process the experiment seeks to observe. Without a mechanism to reduce background, it would be impossible to know whether Charged Lepton Flavor Violation occurred or not. To this end, high-quality track measurements must be distinguished from low-quality track measurements. A track can be conceived of as the reconstructed path of a particle that traveled through the Mu2e detector. In addition to other data, data about such tracks is stored using a C++-based framework, specific to the domain of high-energy physics, known as ROOT. A boosted decision tree model was trained using ROOT’s Toolkit For Multivariate Analysis by leveraging variables ancillary to track quality. In evaluation, the BDT achieves a ROC-AUC of 0.927 in discriminating good-quality tracks from poor-quality tracks. Such a score is indicative of both strong discrimination and strong generalization. Subsequently, it is shown that applying a BDT-based quality cut to the distribution of particle momenta significantly enhances the signal-to-background distinction for signal electrons, paving the way for improved sensitivity to Charged Lepton Flavor Violation.

Mullany, Brendan T. [Drew U.] (ORCID:0009000818888↗
NASA NTRS1995

Overview of the LDEF MSIG databasing activities

The Long Duration Exposure Facility (LDEF) and the accompanying experiments were composed of and contained a wide variety of materials, representing the largest collection of materials flown in low earth orbit (LEO) and retrieved for ground-based analysis to date. The results and implications of the mechanical, thermal, optical, and electrical data from these materials are the foundation on which future LEO spacecraft and missions will be built. The LDEF Materials Special Investigation Group (MSIG) has been charged with establishing and developing databases to document these materials and their performance to assure not only that the data are archived for future generations but also that the data are available to the spacecraft user community in an easily accessed, user-friendly form. This paper gives an overview of the current LDEF Materials Databases, their capabilities, and availability. An overview of the philosophy and format of a developing handbook on LEO effects on materials is also described.

Funk, Joan G.↗
NASA NTRS1985

Charging of DMSP/F6 spacecraft in aurora on 10 January 1983

Spacecraft charging has been widely observed in geosynchronous orbit on the ATS-5 and ATS-6 pair and on the SCATHA spacecraft. An adequate theory for explaining the observations exist. Neither the data or theory can be exported to low polar orbit and its drastically different environment. Evidence of charging on the DMSP F6 spacecraft is presented. A simple model is set up explaining the observations. Two independent instruments on the spacecraft showed charging to a moderate (44 volts) negative potential. The selection spectrometer showed a flux of 2 billion electrons per sq. cm. sec. ster. peaked at 9.5 keV. This was marginally sufficient to overcome the flux of cold ambient ions. Charging calculations are presented showing where simplications are justified and where serious uncertainties exist. More serious charging is predicted for the Shuttle in polar orbit.

Besse, A. L.↗
DOE OSTI2021

Switching of a Magnet by Spin-Orbit Torque from a Topological Dirac Semimetal

Recent experiments show that topological surface states (TSS) in topological insulators (TI) can be exploited to manipulate magnetic ordering in ferromagnets. In principle, TSS should also exist for other topological materials, but it remains unexplored as to whether such states can also be utilized to manipulate ferromagnets. In this paper, current-induced magnetization switching enabled by TSS in a non-TI topological material, namely, a topological Dirac semimetal α-Sn, is reported. The experiments use an α-Sn/Ag/CoFeB trilayer structure. The magnetization in the CoFeB layer can be switched by a charge current at room temperature, without an external magnetic field. The data show that the switching is driven by the TSS of the α-Sn layer, rather than spin-orbit coupling in the bulk of the α-Sn layer or current-produced heating. The switching efficiency is as high as in TI systems. This shows that the topological Dirac semimetal α-Sn is as promising as TI materials in terms of spintronic applications.

36 MATERIALS SCIENCE↗
DOE OSTI2026

Search for dimuon resonance in the 35 to 75 GeV mass range using 140 fb−1 of 13 TeV pp collisions with the ATLAS detector

A model-independent search for low-mass resonances decaying into pairs of oppositely charged muons is presented. The analysis uses proton-proton collision data corresponding to an integrated luminosity of 140 fb−1, recorded by the ATLAS detector at the Large Hadron Collider between 2015 and 2018. The search targets hypothetical dimuon resonances in the invariant mass range from 35 GeV to 75 GeV. The modelling of this mass region is particularly challenging for conventional analytic background parameterisations. To address this, a Gaussian process regression technique is used to model the background. The dimuon mass spectrum is analysed for potential signals, and no statistically significant excess is observed. Upper limits at the 95% confidence level are set on the fiducial production cross-section of new resonances decaying promptly into muons, ranging from 20 fb to 110 fb, depending on the resonance mass. These results are further interpreted in the context of dark-photon and dark-matter-mediator models, leading to new constraints on their parameter spaces.

Aad, G↗
DOE OSTI2023

Search for CP violating top quark couplings in pp collisions at $ \sqrt{s} $ = 13 TeV

Results are presented from a search for CP violation in top quark pair production, using proton-proton collisions at a center-of-mass energy of 13 TeV. The data used for this analysis consist of final states with two charged leptons collected by the CMS experiment, and correspond to an integrated luminosity of 35.9 fb$^{−1}$. The search uses two observables, $ \mathcal{O} _{1}$ and $ \mathcal{O} _{3}$, which are Lorentz scalars. The observable $ \mathcal{O} _{1}$ is constructed from the four-momenta of the charged leptons and the reconstructed top quarks, while $ \mathcal{O} _{3}$ consists of the four-momenta of the charged leptons and the b quarks originating from the top quarks. Asymmetries in these observables are sensitive to CP violation, and their measurement is used to determine the chromoelectric dipole moment of the top quark. The results are consistent with the expectation from the standard model.[graphic not available: see fulltext]

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗