Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “BUBBLE”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,297 records · Page 72
All sourcesNASA NTRSDOE OSTI
NASA NTRS1979

On the laminar separation, transition, and turbulent reattachment of low Reynolds number flows near the leading edge of airfoils

The laminar separation, transition, and turbulent reattachment near the leading edge of a cylindrical nose-constant thickness airfoil model were investigated using a low turbulence, low speed smoke wind tunnel. The locations of separation, transition, and reattachment were obtained from smoke flow photographs and surface oil flow techniques for chord Reynolds numbers from about 150,000 to 470,000. These visual data combined with static pressure distributions and lift and drag measurements delineate the effects of angle of attack, flap deflection angle, and chord Reynolds number on the separation bubble characteristics. The data concerning the length of the laminar and turbulent portions of the bubble agree with the empirical prediction methods for short bubbles.

Arena, A. V.↗
NASA NTRS1980

Transferring small samples of viscous liquid

To avoid trapped air bubbles, fluid after removing plunger. Plunger is reinserted, syringe inverted, and air bubbles expelled by depressing plunger. Technique makes it easy to control sample quantities as small as one microliter, without problems from bubbles created by plunger suction.

Miller, B. W.↗
NASA NTRS1979

The 10 to the 8th power bit solid state spacecraft data recorder

The results are summarized of a program to demonstrate the feasibility of Bubble Domain Memory Technology as a mass memory medium for spacecraft applications. The design, fabrication and test of a partially populated 10 to the 8th power Bit Data Recorder using 100 Kbit serial bubble memory chips is described. Design tradeoffs, design approach and performance are discussed. This effort resulted in a 10 to the 8th power bit recorder with a volume of 858.6 cu in and a weight of 47.2 pounds. The recorder is plug reconfigurable, having the capability of operating as one, two or four independent serial channel recorders or as a single sixteen bit byte parallel input recorder. Data rates up to 1.2 Mb/s in a serial mode and 2.4 Mb/s in a parallel mode may be supported. Fabrication and test of the recorder demonstrated the basic feasibility of Bubble Domain Memory technology for such applications. Test results indicate the need for improvement in memory element operating temperature range and detector performance.

Murray, G. W.↗
NASA NTRS1983

Thermal Gradient Fining of Glass

Molten glass fined (cleared of bubbles) by heating with suitable temperature gradient, according to preliminary experiments. Temperature gradient produces force on gas bubbles trapped in molten glass pushing bubbles to higher temperature region where they are collected. Concept demonstrated in experiments on Earth and on rocket.

Wilcox, W.↗
NASA NTRS1982

Investigation of multilayer magnetic domain lattice file

A theoretical and experimental investigation determined that current accessed self structured bubble memory devices have the potential of meeting projected data density and speed requirements. Device concepts analyzed include multilayer ferrimagnetic devices where the top layer contains a domain structure which defines the data location and the second contains the data. Current aperture and permalloy assisted current propagation devices were evaluated. Based on the result of this work more detailed device research was initiated. Detailed theoretical and experimental studies indicate that the difference in strip and threshold between a single bubble in the control layer and a double bubble which would exist in both the control layer and data layer is adequate to allow for detection of data. Detailed detector designs were investigated.

Torok, E. J.↗
NASA NTRS1984

On the X-ray emission from Crab-like supernova remnants

Crab-like supernova remnants are modeled as expanding, homogeneous, pulsar-fed bubbles of magnetic field and relativistic particles. Power-law behavior is assumed, with time of bubble radius and magnetic field, and the evolution of the particle spectrum is calculated. It is shown that, if a single power-law distribution of particles is injected into the bubble, this simple model is substantially too bright in X-rays, compared with several observed remnants; a more complex model is evidently required. It is argued that the most likely possibility is that X-ray and radio-producing particles in fact have different origins altogether, and some of the constraints on processes producing X-ray-emitting particles are discussed.

Reynolds, S. P.↗
NASA NTRS1985

The feasibility of silicon on garnet technology

The feasibility of combining silicon and magnetic bubble technologies is demonstrated. Functional MOSFETs have been fabricated on top of bubble films coated with 1-micron thick SiO2 layers. The large grain silicon necessary for these devices is obtained by laser recrystallization of polycrystalline silicon (polysilicon). The laser-recrystallization process causes changes in the magnetic properties of the bubble film; however, these changes can be reversed by subsequent thermal anneals. The required temperature treatments after laser annealing are compatible with the MOSFET fabrication process.

Rasky, P. H. L.↗
NASA NTRS1985

Increase of plasma renin activity in male and female rabbits subjected to dysbaric conditions

The renin-angiotensin-aldosterone system may be implicated in hemodynamic alterations occurring in dysbaric disorders. This report concerns changes in plasma renin activity (PRA) induced by exposure of rabbits to a compression-decompression schedule that does not normally produce clinical manifestations of decompression sickness. The results revealed a significant increase in PRA in 19 of 23 animals following dysbaric exposure. Mean PRA rose from 1.18 ng ang I/ml hr (preexposure) to 2.40 ng ang I/ml hr (postexposure). The increase was particularly pronounced in female animals (217 percent). Asymptomatic intravascular gas bubbles (silent bubbles) were detected by gross or microscopic examination in the majority of the animals. Renin elaboration and secretion in asymptomatic dysbaric exposures may be mediated by bradykinin and/or prostaglandins released or activated in a chain reaction triggered by silent gas bubbles. This hypothesis is also applicable to increased PRA in altitude decompression. Alternatively elevation of PRA may result from decreased renal perfusion when dysbaric disorders are complicated by significant hypovolemia.

Chryssanthou, C.↗
NASA NTRS1985

Transpulmonary passage of venous air emboli

Twenty-seven paralyzed anesthetized dogs were embolized with venous air to determine the effectiveness of the pulmonary vasculature for bubble filtration or trapping. Air doses ranged from 0.05 to 0.40 ml/kg min in 0.05-ml increments with ultrasonic Doppler monitors placed over arterial vessels to detect any microbubbles that crossed the lungs. Pulmonary vascular filtration of the venous air infusions was complete for the lower air doses ranging from 0.05 to 0.30 ml/kg min. When the air doses were increased to 0.35 ml/kg min, the filtration threshold was exceeded with arterial spillover of bubbles occurring in 50 percent of the animals and reaching 71 percent for 0.40 ml/kg min. Significant elevations were observed in pulmonary arterial pressure and pulmonary vascular resistance. Systemic blood pressure and cardiac output decreased, whereas left ventricular end-diastolic pressure remained unchanged. The results indicate that the filtration of venous bubbles by the pulmonary vasculature was complete when the air infusion rates were kept below a threshold value of 0.30 ml/kg min.

Butler, B. D.↗
NASA NTRS1986

Foam flotation as a separation process

The basic principles of foam separation techniques are discussed. A review of the research concerning bubble-particle interaction and its role in the kinetics of the flotation process is given. Most of the research in this area deals with the use of theoretical models to predict the effects of bubble and particle sizes, of liquid flow, and of various forces on the aperture and retention of particles by bubbles. A discussion of fluid mechanical aspects of particle flotation is given.

Currin, B. L.↗
NASA NTRS1986

Evaluation of 9.5 PSIA as a suit pressure for prolonged extravehicular activity

A study was undertaken to determine if a pressure of 9.5 psia would aid against the occurrence of decompression sickness in both males and females (without prebreathing or stage decompression requirements) during a typical simulated extravehicular activity scenario. Twenty percent of the male subjects produced grades 1 and 2 bubbles while females did not produce bubble signals at all. It is concluded that a pressure of 9.5 psia can protect the astronaut from both formation of severe bubbling and development of bends symptoms when exposed to these study conditions.

Dixon, G. A.↗
NASA NTRS1987

Measuring Shapes of Acoustically Levitated Drops

Instrument records shadows of drops in acoustic field. Shapes of acoustically levitated liquid drops and gas bubbles examined by shadow projector. Although acoustic radiation pressure counterbalances gravitational force acting on levitated drops and bubbles, pressure usually not uniform over surfaces and causes them to assume nonspherical shapes. Shape of drop or bubble gives useful information about acoustic field and levitated material. Held aloft in laser beam by acoustic field, liquid drop casts shadow on photographic film. Changing shape of drop recorded in sequence of exposures.

Trinh, E. H.↗
NASA NTRS1987

The behavior of surface tension on steady-state rotating fluids in the low gravity environments

The effect of surface tension on steady-state rotating fluids in a low gravity environment is studied. All the values of the physical parameters used in these calculations, except in the low gravity environments, are based on the measurements carried out by Leslie (1985) in the low gravity environment of a free-falling aircraft. The profile of the interface of two fluids is derived from Laplace's equation relating the pressure drop across an interface to the radii of curvature which has been applied to a low gravity rotating bubble that contacts the container boundary. The interface shape depends on the ratio of gravity to surface tension forces, the ratio of centrifugal to surface tension forces, the contact radius of the interface to the boundary, and the contact angle. The shape of the bubble is symmetric about its equator in a zero-gravity environment. This symmetry disappears and gradually shifts to parabolic profiles as the gravity environment becomes non-zero. The location of the maximum radius of the bubble moves upward from the center of the depth toward the top boundary of the cylinder as gravity increases. The contact radius of interface to the boundary r0 at the top side of cylinder increases and r0 at the bottom side of the cylinder decreases as the gravity environment increases from zero to 1 g.

Hung, R. J.↗
NASA NTRS1986

Cosmological shells and blast waves

It is argued that cosmic explosions could have produced significant amounts of large-scale structure in the cosmic microwave background (CMB). Observations appear to indicate the presence of bubblelike structures with radii suggesting that positive energy perturbations were more prevalent than negative energy perturbations, since the latter would produce a prevalence of clusterlke irregularities. Energy input from processes occurring during galaxy formation and releasing about 10 to the 61st-62nd ergs per event would not overly disturb the CMB. The merging of bubbles typically resulting in bubbles with radii of roughly (10-20)/h x Mpc also would not affect the CMB. If much larger bubbles of radii 50-100 Mpc exist, a different energy input is likely to be the cause.

Ostriker, Jeremiah P.↗
NASA NTRS1987

Visualization of vortex breakdown on a delta wing

An account is given of the results obtained by a flow visualization study of the roll-up, breakdown position, and spiral- or bubble-type breakdown characteristics of an 85-deg sweep, flat-plate delta wing at large angles-of-attack. The two different breakdown modes were noted to metamorphose into each other, with the bubble-type phenomenon appearing to prefer a more upstream location relative to the spiral mode. In those instances when the breakdown location was changing, the breakdown took the form of a bubble when moving forward, and spiral when moving aft.

Nelson, R. C.↗
NASA NTRS1987

The local interstellar medium

Observations and theoretical models of the local interstellar medium (LISM), defined as the region within a column density contour of 10 to the 19th H atoms/sq cm, are reviewed. The existence and nature of the Local Bubble and its boundary are examined; and consideration is given to the LISM as an active supernova remnant, confined bubbles, theoretical models of the LISM, cavity geometry, clouds within the Local Bubble, solar-backscatter and other observations of local clouds, ionization mechanisms in clouds, and the implications of clouds for the evolution of the LISM.

Cox, Donald P.↗
NASA NTRS1987

Decompression sickness and venous gas emboli at 8.3 psia

This study sought to determine the bends risk on decompression from sea level to 8.3 psia. On the basis of several prior studies by NASA and the Air Force, this differential was expected to result in a minimal (about 5 percent) incidence of mild decompression sickness, and may be the pressure of choice for the next-generation NASA extravehicular activity (EVA) pressure suit. Thirty-one volunteer subjects, performing light work characteristic of EVA, were exposed to 8.3 psia pressure altitude for six hours. Limb bends incidence was 3.2 percent, and 25.8 percent of the subjects demonstrated significant intravascular bubbling. Those who bubbled were significantly older than the bubble-free group, but differed in no other aspect. An 8.3 psia advanced pressure suit design was considered insufficient to totally preclude the risk of decompression sickness.

Smead, Kenneth W.↗
NASA NTRS1989

Vibration of microgravity environment for rotating fluids in high and low rotating speeds

Time dependent evolutions of the profile of free surface (bubble shapes) for a cylindrical container partially filled with a Newtonian fluid of constant density, rotating about its axis of symmetry, have been studied. Numerical computations of the dynamics of bubble shapes have been carried out with the sinusoidal function vibration of gravity environment in high and low rotating cylinder speeds. The initial condition of bubble profiles was adopted from the steady-state formulations in which the computer algorithms have been developed by Hung and Leslie (1988), and Hung et al. (1988).

Hung, R. J.↗