Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “BLAST”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,297 records · Page 72

Metric-discontinuous zonal grid calculations using the Osher scheme

Computations on zonal grids - in particular, grids with metric discontinuities resulting from the interspersion of highly clustered regions with coarse regions - are possible using a fully conservative form of the Osher upwind scheme. These zonal grids can result from an abrupt clustering of points near solution discontinuities or near other flow features that require improved resolution. The zonal approach is shown to capture shocks with almost 'shock-fitting' quality but with minimal effort. Results for inviscid flow, including quasi-one-dimensional nozzle flow, supersonic flow over a cylinder, and blast-wave diffraction by a ramp, are presented. These calculations demonstrate the powerful capabilities of the Osher scheme used in conjunction with zonal grids in simulating flow fields with complex shock patterns.

Rai, M. M.↗

The galaxy as a self-regulated star-forming system - The case of the OB associations

It is proposed that the energy and momentum injected from OB associations can act as the regulators of high-mass star formation throughout the disk of a spiral galaxy. The mechanism, interacting blast waves driven by supernovae and stellar winds, leads to a generalized Schmidt law for the star formation rate and could explain in a natural way the galactic gradients of metals and star formation rate. The formation of massive stars is determined by the average ambient density in the disk while low-mass star formation is regulated by the density in molecular clouds. That is, there are two modes of star formation, but the physical mechanism is the same in both cases.

Franco, J.↗

Time-dependent dusty gasdynamical flow near cometary nuclei

This paper presents time-dependent solutions to the coupled dusty hydrodynamics equations describing the spherically symmetric expansion of cometary neutral gas in the vicinity of a cometary nucleus. The sublimation process is repressented by gas outflow from a dust-covered reservoir containing stationary gas whose pressure and density values are determined by the sublimating (Ts) and surface (T0) temperatures. The model resolves earlier ambiguities in determining gas production rates and provides analytic relations between Ts, T0, and the gas parameters at the sonic point. The time evolution of a cometary outburst was modeled. It was found that, as a result of the strong gas-dust interaction in the inner coma region, a 'slow' disturbance in both the dust and gas parameters will be created in addition to the familiar gas blast-wave solution. This new 'slow' disturbance, which propagates with a velocity of about 0.2 km/s, might be responsible for some of the observed slowly expanding cometary halos, such as the one which was recently identified using 1910 Mount Wilson high-resolution comet Halley photographs.

Gombosi, T. I.↗

Controlled-Temperature Hot-Air Gun

Materials that find applications in wind tunnels first tested in laboratory. Hot-Air Gun differs from commercial units in that flow rate and temperature monitored and controlled. With typical compressed-airsupply pressure of 25 to 38 psi (170 to 260 kPa), flow rate and maximum temperature are 34 stdft3/min (0.96 stdm3/min) and 1,090 degrees F (590 degrees C), respectively. Resembling elaborate but carefully regulated hot-air gun, setup used to apply blasts of air temperatures above 1,500 degrees F (815 degrees C) to test specimens.

Munoz, M. C.↗

Sputtered cadmium oxide as a surface pretreatment for graphite solid lubricant films

Sputtered films of cadmium oxide were applied to sand blasted AISI 440C HT stainless steel disks as a surface pretreatment for the application of rubbed graphite films. Mixtures of cadmium oxide and graphite were applied to the nonpretreated sandblasted metal and evaluated. The results were compared to graphite films applied to other commercially available surface pretreatments. It is found that sputtered CdO pretreated surfaces increase the endurance lives of the graphite films and decrease the counterface steady state wear rate of the pins almost an order of magnitude compared to commercially available pretreatments. The CdO additions in general improved the tribological properties of graphite. The greatest benefit occurred when it was applied to the substrate rather than mixing it with the graphite and that sputtered films of CdO perform much better than rubbed CdO films.

Fusaro, R. L.↗

Pressure Systems Energy Release Protection (Gas Pressurized Systems)

A survey of studies into hazards associated with closed or pressurized system rupture and preliminary guidelines for the performance design of primary, secondary, and protective receptors of these hazards are provided. The hazards discussed in the survey are: blast, fragments, ground motion, heat radiation, biological, and chemical. Performance guidelines for receptors are limited to pressurized systems that contain inert gas. The performance guidelines for protection against the remaining unaddressed degenerative hazards are to be covered in another study.

Brown, S. J.↗

Method for the production of strongly adhesive films on titanium and titanium alloys with a metallization process

A process for the spray-application of a strongly adhesive, thick antifriction layer on titanium and titanium alloys is proposed. The titanium/titanium alloy component to be coated is first subjected to cleaning in a pickling bath with reducing additives and sand-blasting, then coated with an intermediate layer of nickel, after which the final layer is applied. The formation of TiNi at the interface ensures strong bonding of the antifriction layer.

Hahn, H. J.↗

Patched-grid calculations with the Euler and Navier-Stokes equations: Theory and application

The Rai (1984,85) patch-boundary scheme for the Euler equations is described. The integration methods used to update the interior grid points are are discussed. Stability of patch-boundary schemes and the use of these schemes in Navier-Stokes calculations are mentioned. Results for inviscid, supersonic flow over a cylinder, blast wave diffraction by ramp, and the motion of a vortex in a freestream are presented. These test cases demonstrate the quality of solutions possible with the scheme.

Rai, M. M.↗

Dynamic features of combustion

The dynamic features of combustion are discussed for four important cases: ignition, inflammation, explosion, and detonation. Ignition, the initiation of a self-sustained exothermic process, is considered in the simplest case of a closed thermodynamic system and its stochastic distribution. Inflammation, the initiation and propagation of self-sustained flames, is presented for turbulent flow. Explosion, the dynamic effects caused by the deposition of exothermic energy in a compressible medium, is illustrated by self-similar blast waves with energy deposition at the front and the adiabatic non-self-similar wave. Detonation, the most comprehensive illustration of all the dynamic effects of combustion, is discussed with a phenomenological account of the development and structure of the wave.

Oppenheim, A. K.↗

Catastrophic debris avalanche deposit of Socompa volcano, northern Chile

Between 10,000 and 500 yr ago the Socompa volcano in northern Chile experienced a catastrophic collapse of a 70 deg sector of the original cone, causing a debris avalanche that descended nearly 3000 m vertically and traveled more than 35 km from the volcano. The deposits cover some 490 sq km and have a minimum volume of 15 cu km. Parts of the original cone slumped in a nearly coherent form and are now preserved as large blocks more than 400 m high. The primary avalanche traveled northwestward over sloping ground before coming to rest transiently, forming a prominent marginal ridge, and then slid away northeastward to form a secondary flow, overriding much of the primary avalanche deposit. Abundant, prismatic, jointed dacite blocks within the debris avalanche deposit and a thin, fine-grained pumiceous deposit beneath it suggest that the collapse was triggered by magmatic activity and may have been accompanied by a violent lateral blast. Collapse was followed by eruption of pumiceous pyroclastic flows and extrusion of voluminous dacite domes.

Francis, P. W.↗

Laser ablation of human atherosclerotic plaque without adjacent tissue injury

Seventy samples of human cadaver atherosclerotic aorta were irradiated in vitro using a 308 nm xenon chloride excimer laser. Energy per pulse, pulse duration and frequency were varied. For comparison, 60 segments were also irradiated with an argon ion and an Nd:YAG laser operated in the continuous mode. Tissue was fixed in formalin, sectioned and examined microscopically. The Nd:YAG and argon ion-irradiated tissue exhibited a central crater with irregular edges and concentric zones of thermal and blast injury. In contrast, the excimer laser-irradiated tissue had narrow deep incisions with minimal or no thermal injury. These preliminary experiments indicate that the excimer laser vaporizes tissue in a manner different from that of the continuous wave Nd:YAG or argon ion laser. The sharp incision margins and minimal damage to adjacent normal tissue suggest that the excimer laser is more desirable for general surgical and intravascular uses than are the conventionally used medical lasers.

Grundfest, W. S.↗

A numerical study of shock wave diffraction by a circular cylinder

The nonstationary shock wave diffraction patterns generated by a blast wave impinging on a circular cylinder are numerically simulated using a second-order hybrid upwind method for solving the two-dimensional inviscid compressible Euler equations of gasdynamics. The complete diffraction patterns, including the transition from regular to Mach reflection, trajectory of the Mach triple point and the complex shock-on-shock interaction at the wake region resulting from the Mach shocks collision behind the cylinder are reported in detail. Pressure-time history and various contour plots are also included. Comparison between the work of Bryson and Gross (1961) which included both experimental schlieren pictures and theoretical calculations using Whitham's ray-shock theory and results of the present finite difference computation indicate good agreement in every aspect except for some nonideal gas and viscous effects which are not accounted for by the Euler equations.

Yang, J.-Y.↗

Immunological analyses of U.S. Space Shuttle crewmembers

Changes in the immunoresponsiveness of 'T' lymphocytes following space flight have been reported previously. Additional data collected before and after 11 Shuttle space flights show that absolute lymphocyte numbers, lymphocyte blastogenic capability, and eosinophil percent in the peripheral blood of crewmembers are generally depressed postflight. These responses resemble those associated with physical and emotional stress and may not be related to flight per se. Additional data from Space Shuttle flights 41B and 41D, involving 11 crewmembers, indicate a postflight decrease in cells reacting with 'B' lymphocyte and monocyte monoclonal antibody tags. Further, the loss of 'T' lymphocyte blast capability correlates with the decreased monocyte count (correlation coefficient = 0.697). This finding implies that the previously reported loss of blastogenic capability may be a function of decreased monocyte control, as noted in several nonspaceflight related studies.

Taylor, G. R.↗

Hot-Air-Pulse Generator

Mixer blades interrupt airflow for rapid testing of insulating materials. Device for producing periodic blasts of heated air used for rapid testing of flexible insulating materials. Used to compare materials and to select candidates for more detailed testing in wind tunnels.

Ammerman, M. C.↗

Observational study of ion-electron equilibration and of cloud evaporation in supernova remnants under the HEAO-2 guest investigator program

Observations of three selected supernovae remnants (Cygnus Loop, IC 443, and Puppis A) were made in the forbidden coronal iron lines (Fe X) lambda 6374 and (Fe XIV) lambda 5303. The resulting data was compared quantitatively with Einstein images of the same objects, and an attempt was made to determine (a) the process by which ion and electron energies are equilibrated behind the shock front in the ISM and (b) whether cloud evaporation occurs within the hot remnant interiors. Spatially-resolved X ray emission were modeled for Sedov-Taylor blast wave models of supernovae remnants (SNR) under conditions of non-equlibrium ionization. The computations are intended to provide results that can be directly compared with Einstein high resolution image (HRI) and imaging proportional counter (IPS) data. The computer program for predicting the spatial distribution of HRI and IPS counting rates was completed, and final testing of it had begun.

Teske, R. G.↗

Aviation fuel property effects on altitude relight

The major objective of this experimental program was to investigate the effects of fuel property variation on altitude relight characteristics. Four fuels with widely varying volatility properties (JP-4, Jet A, a blend of Jet A and 2040 Solvent, and Diesel 2) were tested in a five-swirl-cup-sector combustor at inlet temperatures and flows representative of windmilling conditions of turbofan engines. The effects of fuel physical properties on atomization were eliminated by using four sets of pressure-atomizing nozzles designed to give the same spray Sauter mean diameter (50 + or - 10 micron) for each fuel at the same design fuel flow. A second series of tests was run with a set of air-blast nozzles. With comparable atomization levels, fuel volatility assumes only a secondary role for first-swirl-cup lightoff and complete blowout. Full propagation first-cup blowout were independent of fuel volatility and depended only on the combustor operating conditions.

Venkataramani, K.↗

A multiwavelength investigation of the supernova remnant IC 443

Multiwavelength observations of the supernova remnant IC 443 at radio, infrared, optical, ultraviolet, and X-ray wavelengths are presented. This morphological study of IC 443 presents a detailed picture of an adolescent supernova remnant in a multiphase interstellar medium. Radio observations show that better than 80 percent of the continuum emission at 18 cm is in a large-scale (greater than 18 arcmin) component. Decomposition of the infrared data shows that radiatively heated dust, shocked blackbody dust emission, and infrared line emission are all important components of the observed IRAS fluxes. The morphology of the IC 443 region is consistent with a supernova blast in an interstellar medium with a nonuniform distribution of clouds. The bright northeast rim and the great extent of the remnant to the southwest are most easily explained by a cloud filling factor which is greatest in the northeast and falls off toward the southwest.

Mufson, S. L.↗