Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Ar”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,297 records · Page 72

Proton-associated alpha-irradiation in the early solar system - A possible K-41 anomaly

It is shown that alpha-particle fluences associated with proton fluences sufficiently high to produce the Al-correlated excess of Mg-26 found in the Allende meteorite produce equally significant amounts of Ca-41. The Ca-41 is produced by Ar-38(alpha,n)Ca-41 reactions occurring in the gas and condenses into the Ca-Al-rich grains forming at that time. After the decay of Ca-41, these grains will have a Ca-correlated excess of K-41. The question is considered whether the proposed scheme is capable of producing an observable excess of K-41. A calculation is conducted of the magnitude of the K-41 excess expected to be found in Ca-Al-rich grains for various ratios of Ca/K by developing an irradiation-condensation model. It is shown that on the basis of the currently available data it is not possible to come to firm conclusions regarding the validity of the irradiation model.

Dwek, E.↗

Energy distributions of sputtered copper neutrals and ions

Direct quantitative analysis of surfaces by secondary ion mass spectrometry will depend on an understanding of the yield ratio of ions to neutrals. This ratio as a function of the energy of the sputtered particles has been obtained for a clean polycrystalline copper surface sputtered by 1000-3000 eV Ar(+). The energy distributions of both neutral and ionized copper were measured with a retarding potential analyzer using potential modulation differentiation and signal averaging. The maximum for both distributions is identical and occurs near 2.5 eV. The energy distributions of neutrals is more sharply peaked than that of the ions, presumably as a consequence of more efficient nutralization of slow escaping ions by the mobile electrons of copper. The ion-neutral ratio is compared with results from various ionization models.

Lundquist, T. R.↗

Absolute rate of the reaction of bromine atoms with ozone from 200 to 360 K

The rate constant for the reaction Br + O3 yields BrO + O2 has been measured from 200 to 360 K by the technique of flash photolysis coupled to time resolved detection of bromine atoms by resonance fluorescence (FP-RF). Br atoms were produced by the flash photolysis of CH3Br at a wavelength of 165 nm. O3 concentration was monitored continuously under reaction conditions by absorption at 253.7 nm. At each of five temperatures the results were independent of substantial variations in O3 concentration, total pressure (Ar), and limited variations in flash intensity (i.e., initial Br concentration). The measured rate constants obey the Arrhenius expression, k = (7.74 plus or minus 0.50) x 10 to the -12th exp(-603 plus or minus 16/T) cu cm/molecule/sec, where the error quoted is two standard deviations.

Michael, J. V.↗

Rb-Sr isochron age of the Manicouagan melt sheet, Quebec, Canada

Rb-Sr isotopic data for mineral separates from a rock of the Manicouagan impact melt sheet define an isochron of age T = 214 + or - 5 (2 sigma) m.y. which agrees with the K-Ar age of 210 + or - 8 (2 sigma) calculated by Wolfe (1971). The initial Sr-87/Sr-86 ratio I is found to be 0.70991 + or - 0.00007 (2 sigma); four whole rock samples yield age-corrected I values ranging from 0.70965 to 0.71006. These high I values support the hypothesis that the melt sheet was derived by total melting of Grenville basement rocks during the impact event 214 m.y. ago.

Jahn, B.↗

Anomalous krypton in the Allende meteorite

The reported investigation provides important new data for the heavy noble gases, especially Kr, in the Allende meteorite. The data are used to criticize the original model of Lewis et al. (1975) based on the noble gas data of these researchers. The conclusions reached in the investigation support alternative models which have been mainly based on Xe data by Lewis et al. (1975, 1977). Because of the relatively high noble gas abundances in the separates studied, disturbance from nuclear effects occurring in situ such as spallation and neutron capture is insignificant, offering an opportunity to study primordial Ar, Kr, and Xe. The isotopic and abundance data obtained from the samples largely confirm the noble gas results of Lewis et al. (1975, 1977) where isotopic correlations agree with the correlations of the considered samples. It is found that both Kr and Xe data are consistent with a two component mixture of 'ordinary' as well as 'anomalous' planetary gases.

Frick, U.↗

Olivine separates from Murchison and Cold Bokkeveld - Particle tracks and noble gases

Olivine separates from Murchison and Cold Bokkeveld were analyzed for particle tracks and noble gases. The matrix remaining after olivine separation was also analyzed for noble gases. The olivines from both meteorites have comparable fractions of solar-flare-irradiated grains, but the highest track densities in Murchison are an order of magnitude greater than those in Cold Bokkeveld. Solar Ne content in Murchison olivines follows this trend, being at least an order of magnitude higher than that in Cold Bokkeveld. Track gradients in Cold Bokkeveld olivines are flatter than those in Murchison or recently exposed lunar crystals. Relative to the matrix, olivine separates in both meteorites have small enrichments at the heavy and light Xe isotopes and smaller Ar-36/Ar-38 ratios. These noble-gas effects may be related to a chromite impurity in the olivine separates.

Macdougall, J. D.↗

4.2-4.3 AE anorthositic soil fragments - Equilibrated or unequilibrated polycomponent systems

The petrographies and phase chemistries of five lunar crystalline anorthositic fragments with Ar-40/Ar-39 plateau 'ages' ranging from 4.1 to 4.3 AE are reported. An investigation is conducted to determine whether the individual fragments are monomict or polymict breccias. For polymict breccias it is attempted to establish whether clasts and matrix have equilibrated chemically. On the basis of the results of the investigation it is suggested that sample 73263,1,1 was a breccia (possibly a clast-laden melt) containing old clasts, incorporated in an ejecta blanket that was annealed at about 4.1 AE in a transient high-temperature event. The sample 73263,1,6 studied is an annealed anorthositic breccia containing approximately 20% clasts dominated by single-crystal plagioclase fragments. The obtained data are consistent with a two-component system containing old plagioclase clasts in a young (about 4.0 AE) annealed, matrix. The annealing event at approximately 4.0 AE was insufficient to equilibrate the argon. It is found that four of the breccias having ages of about 4.2 AE or more are polymict. The most striking feature of all of the samples studied is the presence of a significant amount of 4.2-4.3 AE argon.

Delano, J. W.↗

Noble gas evidence for the depositional and irradiational history of 60010-60009 core soils

Isotopic abundances of the noble gases have been determined in grain size separates of eleven soils from different depths in the 60010-60009 double drive tube and in magnetic and plagioclase separates from a few of these soils. Data for the 60010 core are presented here. The entire core was deposited a maximum of approximately 125 m.y. ago as deduced from the Ar-38 cosmic ray exposure age of soil 60009,457. Soils in the topmost 12 cm of the core show loss of cosmogenic He-3 and Ne-21 and gain of trapped solar gases in proportion to the degree of surface reworking by micrometeorites as deduced from FMR data. A variety of compositional and irradiational evidence suggests that soils in the core were formed by mixing of three or more components during or immediately prior to core deposition less than about 125 m.y. ago. Based on cosmogenic noble gases and a variety of other data soils 60009,457 and 60010,3107 are similar (and possibly identical) to two of the end member soils which formed the mixture. More mature soils in the core, however, could not have matured in situ from these two soils because of significant differences in noble gas abundances and chemical composition.

Bogard, D. D.↗

Some characteristics of electric field momentum coupling with the neutral atmosphere

A three-dimensional model has been developed to describe momentum coupling between high-latitude electric fields, neutral winds, temperature, and composition. The Hall drag is found to be the main source for atmospheric winds and the small divergence component of winds is due to the Pedersen drag and the Hall drag. Adiabatic heat transfer is responsible for the back pressure which damps the divergence field and for the reversal in circulation of the divergence field at higher altitudes. Back pressure causes a decrease in total wind velocity of about 10% at exospheric heights and by a factor of about 2 at 120 km. The wind field with the pressure feedback may be simulated by neglecting pressure variations and the Coriolis force. Density variations of Ar, N2, O, and He, induced by the momentum source, are in phase above 120 km and out of phase with the temperature amplitude above 150 km. The electrostatic field momentum source is ineffective for directly inducing density and temperature variations in the upper thermosphere.

Mayr, H. G.↗

Trapped xenon in lunar anorthositic breccia 60015

The isotropic composition of trapped xenon released at temperatures in excess of 1000 C from the Apollo 16 cataclastic anorthosite 60015 is found to be indistinguishable from that of the terrestrial atmosphere, in confirmation of the recent reports of terrestrial-like trapped xenon in similar lunar samples. The order-of-magnitude difference between the abundances of this trapped component in two very similar rocks (60015 and 60025) is interpreted as possible evidence for a lunar origin for the trapped xenon. Although the alternative explanation as terrestrial contamination cannot be ruled out, the relative abundances of trapped Ar, Kr, and Xe in rocks with terrestrial-like xenon provide additional evidence against a terrestrial origin.

Leich, D. A.↗

Rare gases and Ca, Sr, and Ba in Apollo 17 drill-core fines

Trapped gas isotopic compositions and spallation gas concentrations as functions of depth in the Apollo 17 drill core were determined from mass spectrometer studies by means of correlation techniques. The distribution of He, Ne, Ar, Kr, and Xe as well as Ca, Sr, and Ba was investigated, and rare-gas spallation and neutron capture profiles are compared with attention to proposed depositional models for the Taurus-Littrow regolith. The data exclude a sedimentation pattern similar to that found at the Apollo 15 site but are possibly compatible with long-term continuous accretion models or models of very recent rapid accumulation of regolith.

Pepin, R. O.↗

Agglutinates as indicators of lunar soil maturity - The rare gas evidence at Apollo 16

The weight percent of lunar agglutinic glass (glass-welded aggregates resulting from micrometeorite impacts) in Apollo 16 bulk soils is considered with respect to quantities of trapped rare gases, e.g., He-4, Ne-20, Ar-36, Kr-84, and Xe-132, in an effort to determine the cumulative time a given soil sample has spent exposed on the lunar surface. The agglutinic glass, which reacts strongly in a magnetic field, is obtained by the standard fluid (methanol)-magnetic technique. It is noted that the absolute concentrations of trapped rare gases all show a linear relationship with increasing agglutinic glass content.

Charette, M. P.↗

Adhesive bonding of ion beam textured metals and fluoropolymers

An electron bombardment argon ion source was used to ion etch various metals and fluoropolymers. The metal and fluoropolymers were exposed to (0.5 to 1.0) keV Ar ions at ion current densities of (0.2 to 1.5) mA/sq cm for various exposure times. The resulting surface texture is in the form of needles or spires whose vertical dimensions may range from tenths to hundreds of micrometers, depending on the selection of beam energy, ion current density, and etch time. The bonding of textured surfaces is accomplished by ion beam texturing mating pieces of either metals or fluoropolymers and applying a bonding agent which wets in and around the microscopic cone-like structures. After bonding, both tensile and shear strength measurements were made on the samples. Also tested, for comparison's sake, were untextured and chemically etched fluoropolymers. The results of these measurements are presented.

Mirtich, M. J.↗

Rate constant for the fraction of atomic chlorine with formaldehyde from 200 to 500K

A flash photolysis - resonance fluorescence technique was used to measure rate constant. The results were independent of substantial variations in H2CO, total pressure (Ar), and flash intensity (i.e., initial Cl). The rate constant was shown to be invariant with temperature, the best representation for this temperature range being K = (7.48 + or - 0.50) x 10 to the minus 11 power cu cm molecule-1 s-1 where the error is one standard deviation. The rate constant is theoretically discussed and the potential importance of the reaction in stratospheric chemistry is considered.

Michael, J. V.↗

Development of improved lithium tantalate pyroelectric detectors

A program was undertaken to increase the detectivity of LiTaO3 pyroelectric detectors to meet a performance requirement of D star (500 K, 15 Hz)=4x10 to the 9th power cm Hz1/2W-1. Emphasis was placed on reduction of the thermal conductance of the detector element to its surroundings, thinning the detector wafer to a thickness less than 3 micrometers, and increasing the absorptivity of the standard metallic film coatings. During the program, thermal conductance was reduced 41 percent through the use of reticulated (slotted) structures. Self-supported detector wafers less than 2 micrometers thick were fabricated. Multiple layer coatings, including an AR coating, with 16 percent more absorptance, were designed and fabricated. Later refinements in the multilayer design program have absorptivities of 75-80 percent, but detectors with these coatings had to be more than 2 micrometers thick because of a mismatch in the thermal expansion coefficients with LiTaO3.

Byer, N. E.↗

Fission-induced plasmas

The possibility of creating a plasma from fission fragments, and to utilize the energy of the particles to create population inversion that would lead to laser action is investigated. An investigation was made of various laser materials which could be used for nuclear-pumped lasing. The most likely candidate for a fissioning material in the gaseous form is uranium hexafluoride - UF6, and experiments were performed to investigate materials that would be compatible with it. One of the central problems in understanding a fission-induced plasma is to obtain a model of the electron behavior, and some preliminary calculations are presented. In particular, the rates of various processes are discussed. A simple intuitive model of the electron energy distribution function is also shown. The results were useful for considering a mathematical model of a nuclear-pumped laser. Next a theoretical model of a (3)He-Ar nuclear-pumped laser is presented. The theory showed good qualitative agreement with the experimental results.

Harries, W. L.↗

Metamorphism, argon depletion, heat flow and stress on the Alpine fault

The Alpine fault of New Zealand is a major continental transform fault which was uplifted on its southeast side 4 to 11 km within the last 5 m.y. This uplift has exposed the Haast schists, which were metamorphosed from the adjacent Torlesse graywackes. The Haast schists increase in metamorphic grade from prehnite-pumpellyite facies 9-12 km from the fault through the chlorite and biotite zones of the greenschist facies to the garnet-oligoclase zone amphibolite facies within 4 km of the fault. These metamorphic zone boundaries are subparallel to the fault for 350 km along the strike. The K-Ar and Rb-Sr ages of the schists increase with distance from the fault: from 4 m.y. within 3 km of the fault to approximately 110 m.y. 20 km from the fault. Field relations show that the source of heat that produced the argon depletion aureole was the fault itself.

Scholz, C. H.↗