Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “structural alignment”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,279 records · Page 71

Molecular dynamics simulation of Fe-Si alloys using a neural network machine learning potential

Interatomic potential development using machine learning (ML) approaches has attracted a lot of attention in recent years because these potentials can effectively describe the structural and dynamical properties of complex materials at the atomistic level. Here, in this work, we present the development of a neural network (NN) deep ML interatomic potential for Fe-Si alloys, and we demonstrate the effectiveness of the NN-ML potential in predicting the structures and energies of liquid and crystalline phases of Fe-Si alloys in comparison with the results from ab initio molecular dynamics simulations or experimental data. The developed NN-ML potential is also used to perform molecular dynamics simulations to study the structures of Fe-Si alloys with various compositions under rapid solidification conditions. The short-ranged orders in the rapidly solidified Fe-Si alloys are also analyzed by a cluster alignment method.

36 MATERIALS SCIENCE↗

Characterization of n-Type Iodine-Doped and Indium-Doped CdTe/Cd-Se-Te Thin Films Fabricated by Close-Spaced Sublimation Epitaxy

In this study, n-type CdTe thin films, specifically iodine-doped CdTe (CdTe:I), indium-doped CdTe (CdTe:In), and indium-doped Cd-Se-Te (CST:In), were synthesized using close-spaced sublimation epitaxy (CSSE). Characterization techniques secondary ion mass spectrometry (SIMS), electron backscatter diffraction (EBSD), Hall-effect measurements, and time-resolved photoluminescence (TRPL) were employed to analyze the chemical, structural, and electronic properties of these materials. The results indicated epitaxial single crystal CSSE films grew on the single crystal substrates, with carrier density ranging from 10^14 - 10^16 cm -3 , and after post-annealing, the minority-carrier lifetimes reach near the radiative limit. Additionally, a preliminary exploration of homojunction structures with an n- type (CdTe:In /CST:In /CdTe:I) /CdTe:P /Cu /Mo configuration was performed. The best device performance was achieved with CdTe:I including CdS aiding in band alignment, resulting in a power conversion efficiency (..eta..) of 2.61% with open circuit voltage (Voc) of 850 mV, fill factor (FF) of 47.8%, and short-circuit current (Jsc) of 6.44 mA/cm 2 . The observed low Jsc and efficiency may be attributed to a buried junction and a poor interface, due to dopant interdiffusion. Consequently, further investigations focusing on interface optimization, diffusion blocking, and reduced recombination through passivation, are crucial to enhancing the efficiency of CSSE CdTe homojunction devices in the future.

cadmium compounds↗

ezAlign: A Tool for Converting Coarse-Grained Molecular Dynamics Structures to Atomistic Resolution for Multiscale Modeling

Soft condensed matter is challenging to study due to the vast time and length scales that are necessary to accurately represent complex systems and capture their underlying physics. Multiscale simulations are necessary to study processes that have disparate time and/or length scales, which abound throughout biology and other complex systems. Herein we present ezAlign, an open-source software for converting coarse-grained molecular dynamics structures to atomistic representation, allowing multiscale modeling of biomolecular systems. The ezAlign v1.1 software package is publicly available for download at github.com/LLNL/ezAlign. Its underlying methodology is based on a simple alignment of an atomistic template molecule, followed by position-restraint energy minimization, which forces the atomistic molecule to adopt a conformation consistent with the coarse-grained molecule. The molecules are then combined, solvated, minimized, and equilibrated with position restraints. Validation of the process was conducted on a pure POPC membrane and compared with other popular methods to construct atomistic membranes. Additional examples, including surfactant self-assembly, membrane proteins, and more complex bacterial and human plasma membrane models, are also presented. By providing these examples, parameter files, code, and an easy-to-follow recipe to add new molecules, this work will aid future multiscale modeling efforts.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

The Optical Corrector for the Dark Energy Spectroscopic Instrument

The Dark Energy Spectroscopic Instrument (DESI) is currently measuring the spectra of 40 million galaxies and quasars, the largest such survey ever made to probe the nature of cosmological dark energy. The 4 m Mayall telescope at Kitt Peak National Observatory has been adapted for DESI, including the construction of a 3$_{.}^{°}$2 diameter prime focus corrector that focuses astronomical light onto a 0.8 m diameter focal surface with excellent image quality over the DESI bandpass of 360–980 nm. The wide-field corrector includes six lenses, as large as 1.1 m in diameter and as heavy as 237 kilograms, including two counterrotating wedged lenses that correct for atmospheric dispersion over zenith angles from 0° to 60°. The lenses, cells, and barrel assembly all meet precise alignment tolerances on the order of tens of microns. The barrel alignment is maintained throughout a range of observing angles and temperature excursions in the Mayall dome by use of a hexapod, which is itself supported by a new cage, ring, and truss structure. In this paper we describe the design, fabrication, and performance of the new corrector and associated structure, focusing on how they meet DESI requirements. In particular, we describe the prescription and specifications of the lenses, design choices and error budgeting of the barrel assembly, stray light mitigations, and integration and test at the Mayall telescope. We conclude with some validation highlights that demonstrate the successful corrector on-sky performance, and we list some lessons learned during the multiyear fabrication phase.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Experimental test of magnetospheric models.

The barium cloud injection deep into the magnetosphere of Sept. 21, 1971, has revealed that the quiet-time near-equatorial nightside magnetic field is significantly different from that predicted by existing quite-time models. The influence of currents flowing on or near the geomagnetic equator gives the field a more tail-like structure at a distance as close as 5 earth radii. Several models have been tried out to obtain a best fit to the experimental observations of the shape of the field-aligned ion cloud. Although this method does not lead to a unique solution, the most acceptable option emerging from this analysis is a quiet-time tilted image-dipole model with a Williams-Mead tail field and a disclike ring current on the geomagnetic equator.

Barish, F. D.↗

Fixture for limited-access welding

Fixture consisting of screw-on expansion clamps and backup bar aligns edges of plates for precision butt welding. Tool holds plates securely, without offset, and allows welding and clamp disassembly to be completed when there is access from only one side of structure.

Tryon, J. R.↗

An active alignment scheme for the MPTS array

In order to achieve and maintain required flatness of the antenna array, a rotating laser beam used for leveling applications on earth was utilized as a reference system. A photoconductive sensor with a reflective collecting surface determines the displacement and polarity of any misalignment and automatically engages a stepping motor to drive a variable-length mechanism to make the necessary corrections. Once aligned, little power is dissipated since a nulling bridge circuit that centers on the beam is used. A three-point subarray alignment arrangement is described which independently adjusts, in the three orthogonal directions, the height and tilt of subarrays within the MPTS array and readily adapts to any physical distortions of the secondary structure (such as that resulting from severe temperature extremes caused by an eclipse of the Sun). It is shown that only one rotating laser system is required since optical blockage is minimal on the array surface and that it is possible to incorporate a number of redundant laser systems for reliability without affecting the overall performance.

Iwasaki, R.↗

Study of inverted-V auroral precipitation events

The macroscopic properties of inverted V events measured by the Atmospheric Explorer-D satellite are described, along with the spatial distributions and the extents of individual events. The satellite carried 19 detectors, each comprising a cylindrical electrostatic analyzer followed by an electron multiplier. A total of 430 events was recorded, none of which occurred in cusp precipitation. The observed characteristics of the inverted V events are compared with particle distribution properties predicted by a double layer mechanism, an electrostatic shock model, extended field-aligned potential, and anomalous resistivity. Widespread, continuous electric fields were found parallel to the magnetic field lines, and anomalous resistivity was determined as the most favorable mechanism for producing the electron precipitation structure observed.

Hoffman, R. A.↗

A magnetohydrodynamic model of whistler duct structure in the magnetosphere

In this study, the physical structure for the propagation of whistler waves within a duct in the earth's magnetosphere is investigated by means of magnetohydrodynamic (MHD) theory. Expressions for the current density and induced magnetic field are determined analytically and evaluated in terms of two models for the duct plasma density distribution. It is found that once the duct is formed, forces associated with the current structure will maintain it. MHD instabilities are examined briefly and found to be unlikely to threaten duct maintenance in regions where whistlers are typically observed. Examination of some effects of field-aligned currents suggest that this may be a viable mechanism for duct formation.

Wang, S.↗

Concepts and effects of damping in isolators

A series of innovative designs and inventions which led to the solution of many aerospace vibration and shock problems through damping techniques is presented. The design of damped airborne structures has presented a need for such creative innovation. The primary concern was to discover what concepts were necessary for good structural damping. Once these concepts are determined and converted into basic principles, the design of hardware follows. The following hardware and techniques were developed in support of aerospace program requirements: shipping containers, alignment cables for precision mechanisms, isolation of small components such as relays and flight instruments, isolation for heavy flight equipment, coupling devices, universal joints, use of wire mesh to replace cable, isolation of 16-dB, 5000 lb horn, and compound damping devices to get better isolation from shock and vibration in a high steady environment.

Kerley, J.↗

A theoretical study of the production and decay of localized electron density enhancements in the polar ionosphere

Uniform convection patterns were introduced into a high latitude time-dependent F region model (HLTD) to study if soft auroral particle precipitation is a necessary precondition to blob formation in the ionosphere. Attention was limited to the conditions leading to the formation of parent blobs (dimensions of at least 10 km) due to plasma instabilities. Consideration was given to the effects of discrete auroral structures and to different O(+) precipitation ionization rate profiles during solar maximum conditions in the thermosphere. Blobs were assumed to be produced on the dayside due to ionization caused by sun-aligned arcs. The simulations indicated that parent blobs would form whenever plasma flux tubes in the ionosphere were exposed to soft particle precipitation lasting more than 10 min. The blobs cease to exist when convected to a region with a high particle production rate where the background particle density exceeds that of the blobs. Conditions wherein either hard or soft particle production can produce blobs are outlined.

Sojka, J. J.↗

High temperature oxidation of beta-NiAl

The oxidation of single crystal beta-NiAl has been studied primarily using electron microscopy. Oriented metastable Al2O3 phases form during transient oxidation at 800 C. Specific orientation relationships exist on all metal orientations studied and are a result of the small mismatch along aligned close-packed directions in the cation sublattices of the metal and oxide. Transformation of the metastable Al2O3 phases at 1100 C results in an oxide morphology described as the 'lacey' structure of alpha-Al2O3 scales. This structure results from impingement of oriented patches of alpha-Al2O3 as the transformation initiates and moves radially parallel to the surface. Scale growth occurs by diffusion along high angle grain boundaries. A drastic reduction in oxidation rate accompanies the change in oxide morphology.

Koychak, J. K.↗

A new sounding rocket payload for solar plasma studies

A sounding rocket payload developed for studies of high-temperature plasmas associated with solar active regions and flares is described. The payload instruments will record both spectra and images in the UV, EUV, and soft X-ray regions of the spectrum. The instruments, including the Dual Range Spectrograph, the Flat Field Soft X-ray Spectrograph, the Normal Incidence Soft X-ray Imager, the UV Filtergraph, and the H-alpha Imaging system, are described. Attention is also given to the new structural system of the payload, based on a large optical table suspended within the payload cavity, which will support the optical elements in their correct positions and orientations and will maintain these alignments throughout the rocket launch environment.

Bruner, Marilyn E.↗

Recent grazing impacts on the earth recorded in the Rio Cuarto crater field, Argentina

An anomalous alignment of oblong rimmed depressions has been observed on the otherwise featureless farmland of the Argentine Pampas. It is argued here, from sample analysis and by analogy with laboratory experiments, that the structure resulted from a low-angle impact and ricochet of a chondritic body originally 150-300 m in diameter.

Schultz, Peter H.↗

Single Wall Carbon Nanotube-Based Structural Health Sensing Materials

Single wall carbon nanotube (SWCNT)-based materials represent the future aerospace vehicle construction material of choice based primarily on predicted strength-to-weight advantages and inherent multifunctionality. The multifunctionality of SWCNTs arises from the ability of the nanotubes to be either metallic or semi-conducting based on their chirality. Furthermore, simply changing the environment around a SWCNT can change its conducting behavior. This phenomenon is being exploited to create sensors capable of measuring several parameters related to vehicle structural health (i.e. strain, pressure, temperature, etc.) The structural health monitor is constructed using conventional electron-beam lithographic and photolithographic techniques to place specific electrode patterns on a surface. SWCNTs are then deposited between the electrodes using a dielectrophoretic alignment technique. Prototypes have been constructed on both silicon and polyimide substrates, demonstrating that surface-mountable and multifunctional devices based on SWCNTs can be realized.

Watkins, A. Neal↗

A full-coordinate model of the polymerase domain of HIV-1 reverse transcriptase and its interaction with a nucleic acid substrate

We present a full-coordinate model of residues 1-319 of the polymerase domain of HIV-I reverse transcriptase. This model was constructed from the x-ray crystallographic structure of Jacobo-Molina et al. (Jacobo-Molina et al., P.N.A.S. USA 90, 6320-6324 (1993)) which is currently available to the degree of C-coordinates. The backbone and side-chain atoms were constructed using the MAXSPROUT suite of programs (L. Holm and C. Sander, J. Mol. Biol. 218, 183-194 (1991)) and refined through molecular modeling. A seven base pair A-form dsDNA was positioned in the nucleic acid binding cleft to represent the template-primer complex. The orientation of the template-primer complex in the nucleic acid binding cleft was guided by the positions of phosphorus atoms in the crystal structure.

Non-NASA Center↗

Quantification of Error Associated with Using Misaligned Meshes in Continuum Damage Mechanics Material Models for Matrix Crack Growth Predictions in Composites

The ability of a material model to capture in-plane matrix mode I and mode II crack growth is an essential component for modeling ply level damage evolution in composite structures. Previous studies using a continuum damage mechanics (CDM) approach have shown success in satisfying benchmark solutions for mode I and II crack growth. However, success was shown using a fiber-aligned meshing strategy, which encourages matrix cracks to propagate in a single band of elements, along the fiber direction. Generating a fiber-aligned mesh becomes a highly involved process for laminates including off-axis (non 0° or 90°) plies. The objective of this study is to quantify the effect of non-fiber aligned mesh discretization on predictions of in-plane matrix crack propagation. The approach taken incrementally varies the mesh orientation angle relative to the fiber orientation; more specifically, misaligned meshes are used to quantify the effect of element angle orientation relative to the initial crack orientation on the energy released during matrix crack propagation simulations using a CDM method. CDM solutions obtained with the misaligned meshes are evaluated against known benchmarks for mode I and II matrix crack growth. The CDM solutions reveal a near-polynomial trend of increased predicted failure stress with increased mesh misalignment angle; hence implying a potential relationship between element orientation angle and apparent fracture toughness.

Justusson, Brian↗

Microfibril orientation and compositional heterogeneity in fiber and vessel cell walls of poplar xylem studied by AFM-IR and SFG spectroscopy

Understanding the structural organization of cellulose microfibrils (CMFs) within individual plant cell walls is essential for connecting cell wall architecture to its mechanical and physiological functions. However, due to the complex hierarchical structure and nanoscale heterogeneity of cell walls, it remains technically challenging to resolve detailed compositional and orientational information at subcellular levels of individual cell walls. This study investigates the internal 3D structure, chemical composition, and sublayer organization of fiber and vessel cell walls in the xylem tissue of a two-year-old field-grown hybrid poplar tree (Populus alba × P. glandulosa) using photothermal atomic force microscopy coupled with infrared spectroscopy (AFM-IR) and sum frequency generation (SFG) hyperspectral microscopy. AFM-IR provided nanoscale chemical imaging, revealing localized compositional heterogeneity, including variations between adjacent cell walls and transitional layers beyond the traditional S1, S2, and S3 sublayers. SFG microscopy revealed that CMFs in fiber walls are highly aligned along the stem axis, consistent with their role in mechanical support, while vessel cell walls exhibited slightly tilted CMFs, reflecting their function in hydraulic transport. Together, these results offer new insights into cell-type-specific CMF organization and compositional gradients in hybrid poplar xylem. These findings highlight the structural and chemical complexity of secondary cell walls in woody plants and demonstrate the value of AFM-IR and SFG spectroscopy in elucidating plant cell wall architecture.

60 APPLIED LIFE SCIENCES↗