Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “sectionalizing”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,279 records · Page 71

Nuclear Recoil Cross Sections from Time-dependent Studies of Two-Photon Double Ionization of Helium

We examine the sensitivity of nuclear recoil cross sections produced by two-photon double ionization of helium to the underlying triple differential cross sections (TDCS) used in their computation. We show that this sensitivity is greatest in the energy region just below the threshold for sequential double ionization. Accurate TDCS, extracted from non-perturbative solutions of the time-dependent Schroedinger equation, are used here in new computations of the nuclear recoil cross section.

74 ATOMIC AND MOLECULAR PHYSICS↗

Neutrino and antineutrino inclusive charged-current cross section measurements with the MINOS near detector

The energy dependence of the neutrino-iron and antineutrino-iron inclusive charged-current cross sections and their ratio have been measured using a high-statistics sample with the MINOS near detector exposed to the NuMI beam from the main injector at Fermilab. Neutrino and antineutrino fluxes were determined using a low hadronic energy subsample of charged-current events. We report measurements of v-Fe ({bar v}-Fe) cross section in the energy range 3-50 GeV (5-50 GeV) with precision of 2%-8% (3%-9%) and their ratio which is measured with precision 2%-8%. The data set spans the region from low energy, where accurate measurements are sparse, up to the high-energy scaling region where the cross section is well understood.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Measurement of the Neutrino Neutral-Current Elastic Differential Cross Section

We report a measurement of the flux-averaged neutral-current elastic differential cross section for neutrinos scattering on mineral oil (CH{sub 2}) as a function of four-momentum transferred squared, Q{sup 2}. It is obtained by measuring the kinematics of recoiling nucleons with kinetic energy greater than 50 MeV which are readily detected in MiniBooNE. This differential cross-section distribution is fit with fixed nucleon form factors apart from an axial mass, M{sub A}, that provides a best fit for M{sub A} = 1.39 {+-} 0.11 GeV. Using the data from the charged-current neutrino interaction sample, a ratio of neutral-current to charged-current quasi-elastic cross sections as a function of Q{sup 2} has been measured. Additionally, single protons with kinetic energies above 350 MeV can be distinguished from neutrons and multiple nucleon events. Using this marker, the strange quark contribution to the neutral-current axial vector form factor at Q{sup 2} = 0, {Delta}s, is found to be {Delta}s = 0.08{+-} 0.26.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Benchmarking simplified template cross sections in W H production

Simplified template cross sections define a framework for the measurement and dissemination of kinematic information in Higgs measurements. We benchmark the currently proposed setup in an analysis of dimension-6 effective field theory operators for W H production. Calculating the Fisher information allows us to quantify the sensitivity of this framework to new physics and study its dependence on phase space. New machine-learning techniques let us compare the simplified template cross section framework to the full, high-dimensional kinematic information. We show that the way in which we truncate the effective theory has a sizable impact on the definition of the optimal simplified template cross sections.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Fracture Toughness of Thick Boride Layers Estimated by the Cross-Sectioned Scratch Test

New results about the fracture toughness (K{sub c}) of thick boride layers estimated by the cross-sectioned scratch test are presented in this study. The FeB-Fe{sub 2}B layers developed at the surface of borided AISI 1018 and AISI 1045 steels and the Fe{sub 2}B layer formed on the borided AISI 1045 steel exposed to a diffusion annealing process (DAP) were used for this purpose. The cross-sectioned scratch tests were performed with a Vickers diamond stylus drawn across the thick boride layer under a constant load to produce a half-cone-shaped fracture near to the top surface of the borided steels. The height of the half-cone-shaped fracture as a function of the cross-sectioned scratch loads was used to determine the fracture toughness of the FeB and Fe{sub 2}B layers. The results showed a fracture resistance of ∼2.8 MPa√m for the FeB layer formed at the surface of borided AISI 1045 steel. Likewise, the effect of the DAP on the surface of the borided AISI 1045 steel promoted the formation of an exclusively Fe{sub 2}B layer, with an increase in the fracture toughness of the whole boride layer around 5 MPa√m. Finally, the principle of the technique can be used to minimize the influence of the anisotropic properties on the fracture toughness along the depth of boride layers.

36 MATERIALS SCIENCE↗

Cross sections for ionization of K, L and M shells of atoms by impact of electrons and positrons with energies up to 1 GeV: Analytical formulas

Analytical formulas are presented for the easy calculation of cross sections for ionization of K, L and M shells of neutral atoms by impact of electrons and positrons with kinetic energies up to 1 GeV. Each formula contains a number of parameters that are characteristic of the element, the active electron shell and the projectile particle. The values of these parameters were determined by fitting the cross section values in an extensive database that was calculated recently by means of a composite algorithm that combines the distorted-wave and plane-wave Born approximations. Tables of parameter values are given for all elements, from hydrogen (Z=1) to einsteinium (Z=99). The proposed analytical expressions yield ionization cross sections that agree with those in the numerical database to within about 1%, except for projectiles with near-threshold energies.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Development of the multigroup cross section library for the CASL neutronics simulator MPACT: Verification

The MPACT neutronics module of the Consortium for Advanced Simulation of Light Water Reactors (CASL) core simulator is a 3D whole core transport code being developed for the CASL toolset, known as the Virtual Environment for Reactor Analysis (VERA). Key characteristics of the MPACT code include a subgroup method for resonance self-shielding and a whole-core transport solver with a 2D/1D synthesis method. Depletion capability is supported by coupling SCALE-ORIGEN with MPACT. A new ENDF/B-VII.1 MPACT 51-group library has been developed by using the AMPX/SCALE and CASL-XSTools code packages based on the procedure introduced in the companion paper, “Development of the Multigroup Cross Section Library for the CASL Neutronics Simulator MPACT: Method and Procedure.” The cross section library generation procedure, cross section library, and MPACT transport capability have been verified by performing various benchmark calculations and comparing the benchmark results to the continuous-energy (CE) Monte Carlo results. Furthermore, the code-to-code comparison for the benchmarks shows that the CASL neutronics simulator MPACT and its 51-group library are working reasonably.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

Development of the multigroup cross section library for the CASL neutronics simulator MPACT: Method and procedure

The MPACT neutronics module of the Consortium for Advanced Simulation of Light Water Reactors (CASL) core simulator is a 3D whole core transport code being developed for the CASL toolset known as the Virtual Environment for Reactor Analysis (VERA). Key characteristics of the MPACT code include a subgroup method for resonance self-shielding and a whole-core transport solver with a 2D/1D synthesis method. The AMPX and SCALE code packages have been significantly improved to include intermediate resonance parameters, as well as new modules to enhance the accuracy of resonance data and scattering matrices for the Bondarenko approach and transport cross sections of hydrogen. In addition, CASL XSTools have been developed to generate the MPACT multigroup cross section library. A simple super-homogenization method for 238U has been developed to resolve reaction rate discrepancy issues caused by angle-dependent total cross sections, poor scattering matrices, and a poor resonance interference model at coarse group structure. Here, due to the limitation of computing capacity that can occur even in high performance computing, a new 51-group structure has been developed for efficient simulation that is applicable for both pressurized water reactor (PWR) and boiling water reactor (BWR) simulations. A new ENDF/B-VII.1 MPACT 51-group library has been developed using the AMPX/SCALE and XSTools code packages, and it has been verified and validated by performing various benchmark calculations.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

Measurements of effective actinides neutron capture cross sections in a cadmium-filtered epithermal neutron spectrum

In this work, a total of 20 actinide samples were irradiated in the Advanced Test Reactor (ATR) at Idaho National Laboratory (INL): 233 U (1), 235 U (1), 236 U (1), 238 U (1), 237 Np (2), 239 Pu (1), 240 Pu (1), 242 Pu (2), 244 Pu (2), 241 Am (2), 243 Am (2), 244 Cm (2), and 248 Cm (2). The samples were loaded in a basket containing a 1.1-mm thick cadmium filter. The presence of the filter drastically changes the neutron spectrum in the samples and accentuates the reaction rates in the resonance region. Isotopic ratios were determined using Multi-Collector Inductively Coupled Plasma Mass Spectrometry (MC-ICP-MS) that allowed inferring effective capture cross sections. Detailed best-estimate MCNP models of the experiment using ENDF/B-VII.0 nuclear data were developed to calculate the effective neutron cross sections and, subsequently, compare them with the cross sections inferred from experimental results.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

Total thermal neutron cross section measurements of hydrogen dense polymers from 0.0005–20 eV

Hydrogen dense polymers, specifically polyethylene, polystyrene, and Plexiglas, have served as neutron moderator and reflector materials in hundreds of separate critical benchmark experiments because of their low cost and abundance of hydrogen. In order to accurately model and simulate these critical benchmarks, the thermal scattering law (TSL) evaluation that governs how neutrons will thermalize must be well understood and rigorously validated. To support this validation, researchers at Rensselaer Polytechnic Institute performed total neutron cross section measurements for high-density polyethylene & polystyrene over the energy range 0.0005–20 eV and for Plexiglas G & Plexiglas G-UVT over the energy range 0.0005–3 eV. Comparisons were made between the measured cross section and that predicted by the ENDF/B-VIII.0 and Oak Ridge National Laboratory/European Spallation Source/Rensselaer Polytechnic Institute TSL evaluations for polyethylene, Plexiglas, and polystyrene, as available. These experiments represent the first total neutron cross section measurements for polystyrene.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Energy levels of a quantum particle on a cylindrical surface with non-circular cross-section in electric and magnetic fields

We calculate the energy levels of a quantum particle on a cylindrical surface with non-circular cross-section in uniform electric and magnetic fields. Using separation of variables method and a change of independent variable, we show that the problem can be reduced to a one-dimensional Schrödinger equation for a periodic potential. The effects of varying the shape of the cross-section while keeping the same perimeter and the strengths of the electric and magnetic fields are investigated for elliptical, corrugated, and nearly-rectangular tubes with radial dimensions of the order of a nanometer. The geometric potential has minima at the angular positions where there is a significant amount of curvature. For the elliptical and corrugated tubes, it is shown that as the tube departs from the circular shape of cross-section the double-degeneracy between the energy levels is lifted. For the nearly-rectangular tube, it is shown that energy level crossings occur as the horizontal dimension of the tube is varied while keeping the same perimeter and radius of circular corners. The interplay between the curvature and the strength of the electric and magnetic fields determines the overall behavior of the energy levels. As the strength of the electric field increases, the overall potential gets skewed creating a potential well on the side corresponding to the more negative electric potential. The energy levels of the first few excited states approach more positive values while the ground state energy level approaches a more negative value. For large electric fields, all bound state energy levels tend to more negative values. The contribution of weak magnetic fields to the overall potential behaves in the same way as the electric field contribution but with its sign depending on the direction of the component of the momentum parallel to the cylindrical axis. Large magnetic fields lead to pairing of energy levels reminiscent of 2D Landau levels for the elliptical and nearly-rectangular tubes.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Transport model predictions of 225 Ac production cross sections via energetic p, d and α irradiation of 232 Th targets

Monte Carlo transport codes PHITS and MCNP6 were used to calculate the production cross sections of 225,227 Ac, 227,229 Th, 223,225 Ra, and 229,230,231 Pa via the bombardment of a 232 Th target with energetic protons, deuterons, and α-particles. The incident projectile energies ranged between 10 and 800 MeV/nucleon. When possible, the predicted production cross sections were compared with the available experimental data and other predictions. Here, the degree of the codes’ abilities to match the measured data provides a qualitative assessment of the codes’ abilities to predict data from similar, but unmeasured, projectile/target systems. In addition, a comparison between calculated cross sections and data may provide insight into possible improvements in the physics models employed by those transport codes.

223Ra↗

A multi-agent approach to distribution system fault section estimation in smart grid environment

We report that Multi-Agent Systems (MAS) are seen from different areas as one of the paramount trends for the next generation of power systems. Numerous published studies about MAS discuss its utilization in power distribution networks but none focuses on the prior step to restoration and self-healing that is fault section estimation. This paper aims to show how MAS can improve the utilities’ reliability indexes and consumer satisfaction by overcoming the multiple fault section estimation problem. In order to do this, the authors considered using MAS as a means of communication between smart meters. The purpose of smart meters usage is to employ devices that are already present in smart grids, mainly because of their reading and saving data capacity. The proposed method was tested on a radial feeder generated by the authors. The network was built on HYPERSIM, a software platform of OPAL-RT Technologies. The simulation results show that this MAS provides speed, efficiency, and automation for the process of fault section estimation.

24 POWER TRANSMISSION AND DISTRIBUTION↗

Facile synthesis, phase transition, optical switching and oxidation resistance properties of belt-like VO{sub 2}(A) and VO{sub 2}(M) with a rectangular cross section

Highlights: ► Belt-like VO{sub 2}(A) with a rectangular cross section was synthesized. ► The formation mechanism of belt-like VO{sub 2}(A) was proposed. ► Belt-like VO{sub 2}(M) was prepared by the irreversible transformation of VO{sub 2}(A). ► VO{sub 2}(A) and VO{sub 2}(M) can be used as the optical switching materials. ► VO{sub 2}(A) and VO{sub 2}(M) have good oxidation resistance below 400 °C in air. -- Abstract: Belt-like VO{sub 2}(A) with a rectangular cross section (VA-RCS) was successfully synthesized using V{sub 2}O{sub 5}, H{sub 2}C{sub 2}O{sub 4}·2H{sub 2}O and H{sub 2}O as the starting materials by a facile hydrothermal approach. Some synthetic parameters, such as, the reaction time, reaction temperature and concentration of H{sub 2}C{sub 2}O{sub 4}·2H{sub 2}O, were systematically investigated to control the fabrication of belt-like VA-RCS. The formation mechanism of belt-like VA-RCS was proposed. Subsequently, belt-like VO{sub 2}(M) with a rectangular cross section (VM-RCS) was prepared by the irreversible transformation of VA-RCS at 700 °C for 2 h under the inert atmosphere. The phase transition temperature (T{sub c}) of VA-RCS and VM-RCS was evaluated by DSC test. The optical switching properties of VA-RCS and VM-RCS were studied by the variable-temperature infrared spectra, and it was found that the as-obtained VA-RCS and VM-RCS could be used as the optical switching materials. Furthermore, the oxidation resistance properties of VA-RCS and VM-RCS were investigated by TGA, indicating that they have good thermal stability and oxidation resistance below 400 °C in air.

36 MATERIALS SCIENCE↗

Uncertainties and Covariances of the Fission Cross Sections and the Fission Neutron Multiplicities for Actinides

Experimental data on the fission cross sections and the fission-neutron multiplicities of actinides are analyzed on the basis of the unrecognized error-estimation method. Such an approach allows us to estimate reasonable systematic uncertainties of available data, which are underestimated by authors of most measurements as a rule. The corresponding uncertainties and covariances of evaluated data are obtained for the most important actinides in the 15-energy group representation. Differences between the present evaluations and the recent BOLNA results are discussed for the main actinides. It is shown that the fission cross section uncertainties are overestimated essentially in the BOLNA analysis for minor actinides. Uncertainties of the cross sections and the neutron multiplicities averaged over the Cf-252 fission-neutron spectrum are considered.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Summary of the Workshop on Neutron Cross Section Covariances

A Workshop on Neutron Cross Section Covariances was held from June 24-27, 2008, in Port Jefferson, New York. This Workshop was organized by the National Nuclear Data Center, Brookhaven National Laboratory, to provide a forum for reporting on the status of the growing field of neutron cross section covariances for applications and for discussing future directions of the work in this field. The Workshop focused on the following four major topical areas: covariance methodology, recent covariance evaluations, covariance applications, and user perspectives. Attention was given to the entire spectrum of neutron cross section covariance concerns ranging from light nuclei to the actinides, and from the thermal energy region to 20 MeV. The papers presented at this conference explored topics ranging from fundamental nuclear physics concerns to very specific applications in advanced reactor design and nuclear criticality safety. This paper provides a summary of this workshop. Brief comments on the highlights of each Workshop contribution are provided. In addition, a perspective on the achievements and shortcomings of the Workshop as well as on the future direction of research in this field is offered.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Neutron Cross Section Covariances for Structural Materials and Fission Products

We describe neutron cross section covariances for 78 structural materials and fission products produced for the new US evaluated nuclear reaction library ENDF/B-VII.1. Neutron incident energies cover full range from 10{sup -5} eV to 20 MeV and covariances are primarily provided for capture, elastic and inelastic scattering as well as (n,2n). The list of materials follows priorities defined by the Advanced Fuel Cycle Initiative, the major application being data adjustment for advanced fast reactor systems. Thus, in addition to 28 structural materials and 49 fission products, the list includes also {sup 23}Na which is important fast reactor coolant. Due to extensive amount of materials, we adopted a variety of methodologies depending on the priority of a specific material. In the resolved resonance region we primarily used resonance parameter uncertainties given in Atlas of Neutron Resonances and either applied the kernel approximation to propagate these uncertainties into cross section uncertainties or resorted to simplified estimates based on integral quantities. For several priority materials we adopted MF32 covariances produced by SAMMY at ORNL, modified by us by adding MF33 covariances to account for systematic uncertainties. In the fast neutron region we resorted to three methods. The most sophisticated was EMPIRE-KALMAN method which combines experimental data from EXFOR library with nuclear reaction modeling and least-squares fitting. The two other methods used simplified estimates, either based on the propagation of nuclear reaction model parameter uncertainties or on a dispersion analysis of central cross section values in recent evaluated data files. All covariances were subject to quality assurance procedures adopted recently by CSEWG. In addition, tools were developed to allow inspection of processed covariances and computed integral quantities, and for comparing these values to data from the Atlas and the astrophysics database KADoNiS.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

Bayesian Evaluation Including Covariance Matrices of Neutron-induced Reaction Cross Sections of {sup 181}Ta

A new evaluation of neutron-induced reactions on {sup 181}Ta using a consistent procedure based on Bayesian statistics is presented. Starting point of the evaluation is the description of nuclear reactions via nuclear models implemented in TALYS 1.4. A retrieval of experimental data was performed and covariance matrices of the experiments were generated from an extensive study of the corresponding literature. All reaction channels required for a transport file up to 200 MeV have been considered and the covariance matrices of cross section uncertainties for the most important channels are determined. The evaluation has been performed in one step including all available experimental data. A comparison of the evaluated cross sections and spectra with experimental data and available evaluations is performed. In general the evaluated cross section reflect our best knowledge and give a fair description of the observables. However, there are few deviations from expectation which clearly indicate the impact of the prior and the need to account for model defects. Using the results of the evaluation a complete ENDF-file similarly to those of the TENDL library is generated.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗