Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “screening”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,279 records · Page 71

Hypothesis Tests on Rayleigh Wave Radiation Pattern Shapes: A Theoretical Assessment for Source Screening (Independent Review: LANL Source Physics LCP) [Slides]

Background for TRL 0-1 Research: we require a simple regional source discriminant that has a predictive capability and a quantifiable screening performance (probability of correct attribution); Challenge: many local and near-regional source discriminants do not test source mechanism; rather, they test depth. Such empirically validated discriminants are not all theoretically justified; and, Proposal: we test Rayleigh wave radiation patterns for any significant deviation from circular shape as a discriminant.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Handheld Biosensor for COVID-19 Screening

We have made significant progress toward the development of an integrated nucleic acid amplification system for Autonomous Medical Devices Incorporated (AMDIs) Optikus handheld diagnostic device. In this effort, we developed a set of loop-mediated isothermal amplification (LAMP) primers for SARS-CoV-2 and then demonstrate amplification directly on a surface acoustic wave (SAW) sensor. We built associated hardware and developed a C-code to control the amplification process. The goal of this project was to develop a nucleic amplification assay that is compatible with SAW sensors to enable both nucleic and serological testing in a single handheld diagnostic device. Toward this goal, AMDI is collaborating Sandia National Laboratories to develop a rapid, portable diagnostic screening device that utilizes Sandias unique surface acoustic wave biosensor (SAW) for COVID-19 detection. Previously, the SANDIA- AMDI SAW sensor has successfully detected multiple high-profile bacteria viruses, including Ebola, HIV, Sin Nombre, and Anthrax. Over the last two years, AMDI and SANDIA have significantly improved the sensitivity and detection capability of the SAW biosensor and have also developed a modular hand-held, portable platform called the Optikus, which uses CD microfluidics and handheld instrumentation to automate all sample preparation, reagent introduction, sample delivery, and measurement for a number of different assay targets. We propose to use this platform for the development of a rapid (%3C30 minutes), point-of-care diagnostic test for detection of COVID-19 from nasal swab samples.

47 OTHER INSTRUMENTATION↗

Development of Gamma Background Radiation Digital Twin with Machine Learning Algorithms: Application of Unsupervised Machine Learning to Detection of Anomalies and Nuisances in Gamma Background Radiation Environmental Screening Data

Environmental screening of gamma radiation consists of detecting weak nuisance and anomaly signal in the presence of strong and highly varying background. In a typical scenario, a mobile detector-spectrometer continuously measures gamma radiation spectra in short, e.g., one-second, signal acquisition intervals. The measurement data is a 2D matrix, where one dimension is gamma ray energy, and the other dimension is the number of measurements or total time. In principle, gamma radiation sources can be detected and identified from the measured data by their unique spectral lines. Detecting sources from data measured in a search scenario is difficult due to the highly varying background because of naturally occurring radioactive material (NORM), and low signal-to-noise ratio (S/N) of spectral signal measured during one-second acquisition intervals. The objective of this work is to explore unsupervised machine learning (ML) algorithms for development of a digital twin of gamma radiation background, and for detection and identification of weak nuisances and anomalies events in the presence of highly fluctuating background. In one segment of work, we developed a gamma background estimation model using a Longshort term memory (LSTM) network for one-step CPS time series prediction. The LSTM model was validated with two data sets of measurements from two independent NaI detectors positioned on a mobile platform. The data sets contained background radiation only and no orphan isotope sources. The LSTM model was constructed and tested using data from one of the detectors. Performance of the LSTM model was validate through one-step prediction of CPS time series of another NaI detector without re-training. This approach allows to create a digital twin for nuclear background estimation. Using LSTM, it could be possible to detect a source through subtraction of the estimated counts from the measured background. In another segment of work, we investigated detection of gamma emitting sources in the presence of complex background using unsupervised machine learning. Spectral lines of isotopes are difficult to observe in one-second measurements. Averaging over the entire measurement campaign data set reveals spectral lines of most common background isotopes. Spectral lines of orphan sources, which might appear only in a few measurements during the campaign, will be washed out if averaging is performed over the entire measurement data set. The approach we have explored consists of extracting one-second measurements containing weak spectral features through data clustering. Averaging one-second spectra in a cluster should reveal the presence of anomaly sources. We created two ML models using K-means clustering and Neural Network Self-organizing Map (SOM). Performance of these ML models was benchmarked using search data. One data set contained 137 Cs source, and another dataset contained 131 I source.

54 ENVIRONMENTAL SCIENCES↗

Bridge Seismic Screening Tool (BSST), Version 2.0

The Regional Resiliency Assessment Program (RRAP) is a cooperative assessment of specific critical infrastructure within a designated geographic area and a regional analysis of the surrounding infrastructure that addresses a range of infrastructure resilience issues that could have regionally and nationally significant consequences. In 2018, DHS’s Cybersecurity and Infrastructure Security Agency (CISA) sponsored the Oregon Transportation Systems RRAP project in coordination with the Office of the Governor (under the oversight of the state resilience officer), the Oregon Office of Emergency Management (OEM), the Oregon Department of Transportation (ODOT), and other regional stakeholders (CISA 2021). This project focuses on assessing the impacts of a Cascadia Subduction Zone (CSZ) earthquake on state transportation systems and, in particular, how those impacts may affect the ability of emergency response efforts to move supplies into the region. The intended outcome of this analysis is the prioritization of transportation routes and modes for additional planning, investment, hardening, or other activities to enhance their resilience—and therefore, to enhance their ability to support response and recovery efforts following a CSZ earthquake. An important part of this transportation system-level assessment has been to assess the seismic vulnerability of the state highway system. In doing so, the RRAP project team used the Bridge Seismic Screening Tool (BSST) to assess, at a system-level, the potential impacts that a CSZ earthquake could have on state highway bridges (Bergerson et al. 2019).1 Argonne National Laboratory (Argonne), in collaboration with the Washington State Department of Transportation (WSDOT), originally developed the BSST as part of the 2017 Washington State Transportation Systems RRAP project, a sister project to the 2018 Oregon Transportation Systems RRAP project. Argonne updated the BSST during this more recent project in Oregon based on feedback from stakeholders and subject matter experts (SMEs) on the original version of the tool. The first step in the BSST is to assess the seismic vulnerability of roadway bridges following a CSZ earthquake to determine a projected or potential damage state. Damage states then help determine approximate reopening times for bridge crossings.2 This document provides details on the BSST methodology, the implementation of that tool to analyze the projected damage incurred in a CSZ earthquake scenario, and the determination of corresponding reopening times of interstate, state highway, and local bridges following such an event.

58 GEOSCIENCES↗

200-IA-1 Operable Unit Ecological Risk Screen

The purpose of this environmental calculation file (ECF) is to document the assumptions, inputs, methodology, equations, and results of a screening level ecological risk assessment (SLERA) conducted for eight of 12 representative waste sites within the newly formed 200 IA-1 Operable Unit (OU); the remaining four waste sites lacked soil data within the shallow vadose zone and were not further evaluated. The SLERA was conducted to evaluate ecological receptor exposure and potential risk using soil data for radionuclides and nonradionuclides occurring within the shallow vadose zone (0 to 15 ft) soil of the OU. The representative Hanford ecological receptors evaluated are: plants, soil invertebrates, California quail (Callipepla californica), Meadowlark (Sturnella neglecta), Killdeer (Charadrius vociferus), Red-tailed hawk (Buteo jamaicensis), Great Basin pocket mouse (Perognathus parvus), Deer mouse (Peromyscus maniculatus), Grasshopper mouse (Onychomys leucogaster), and badger (Taxidea taxus). During the SLERA, detected soil sample results from the shallow vadose zone were used to calculate Hazard Quotients (HQs) for nonradionuclides and Sum of Fractions (SOF) for radionuclides. The results of this SLERA support the preparation of DOE/RL-2020-51, 200-IA-1 Operable Unit Focused Feasibility Study.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Screening and Selection of Illinois Basin ROZs for Resource Assessment

This report summarizes the efforts to screen the seven candidate formations as well as the selection of three formations (Carper Sandstone [part of Borden Siltstone], Tar Springs Sandstone, and Geneva Dolomite/Dutch Creek Sandstone) for further characterization and detailed analysis.

02 PETROLEUM↗

Corrosivity Screening of Pyrolysis Bio-Oils by Short-Term Alloy Exposures. Laboratory Analytical Procedure (LAP), Issue Date: May 12, 2022

Bio-oils contain organic acids and oxygenated compounds that can lead to corrosion issues during bio-oil processing and storage. This Laboratory Analytical Procedure (LAP) allows for rapid screening of a bio-oil's corrosivity without the need for complex equipment and long-term exposures. A robust and repeatable method for assessing the corrosivity of bio-oils is necessary in order to remove materials degradation as an obstacle to research, upgrading, use and storage of bio-oils. This LAP involves the incubation of a representative alloy, 410 stainless steel (410 SS), specimen in bio-oil over a period of 48 hours at 50 degrees C in a sealed container. The corrosive species in the bio-oil react with and deplete alloy elements such as iron (Fe) and/or chromium (Cr) from the specimen into the bio-oil solution. The depletion of Fe and Cr from the specimen results in a significant mass loss that can be recorded. The mass loss is directly correlated to the corrosivity of a bio-oil. Examples of bio-oils in scope include the ones produced by fast pyrolysis and catalytic fast pyrolysis, as well as liquids produced from hydrothermal liquefaction.

09 BIOMASS FUELS↗

Cryo-GCMS Outgassing Screening: Thermal Filler Materials

A study was conducted to investigate the outgassing characteristics of four thermal filler materials. The purpose of this screening was to identify any outgassing products that might be considered reactive, specifically compounds that could result in corrosion in the systems where these materials are used. A range of compounds was observed in the sample headspaces, though most do not stand out as being known reactive species of concern. However, several halogenated compounds and sulfurous compounds- classes compounds known to facilitate corrosion reactions under certain conditions- were observed in low concentrations. The TFLEX 760 exhibited the highest total outgassing, while the GR130 had the lowest. Therm-a-Gap75 and the Si thermal grease exhibited very similar outgassing profiles. It is difficult to predict the extent to which any given compound observed in an analysis of this type might pose a risk in an actual system; factors such as temperature, system geometry, concentration, and gas conductance all play a role in the kinetics governing chemical reactions. It is recommended that the results of these analyses are shared with pertinent materials SMEs familiar with the system(s) in question to evaluate potential risks.

36 MATERIALS SCIENCE↗

AERMOD Screening Dispersion Factors for INL Facilities

This engineering calculations and analysis report (ECAR) documents the calculation of screening level air dispersion factors (DFs) for use in identifying Idaho National Laboratory (INL) air pollutant sources that would not be of concern relative to state of Idaho Department of Environmental Quality (DEQ) significant impact levels for toxic air pollutants (IDAPA 2020). A DF (in units of s/m 3 ) is the maximum time-averaged model-predicted air concentration (g/m 3 ) at an ambient-air receptor location divided by a unit source release or emission rate (1 g/s). DFs were calculated for a generic pollutant released from facilities at the INL Site and the Idaho Falls Research Education Campus (REC) using the Environmental Protection Agency (EPA)-recommended AERMOD air-dispersion model (EPA 2019a) and site-specific meteorological data. The use of AERMOD for air quality analyses is specified by EPA in Appendix W of 40 CFR Part 51, Guideline on Air Quality Models, and by DEQ in their air modeling guidance (DEQ 2013). DFs were calculated for 1-hour, 3 hour, 8-hour, 24-hour, monthly, and annual averaging times.

99 GENERAL AND MISCELLANEOUS↗

A Miniaturized Ignition Screening Rapid Compression Machine for probing low-to-intermediate temperature chemistry

With an objective to achieve net-zero emissions by no later than 2050, biofuels hold enormous potential as sustainable, renewable fuels that can be produced on a large scale. However, fuels of a similar type, derived from limited feedstock batch can dramatically vary in terms of their chemical structures and compositions, causing significant differences in physicochemical properties mainly influencing ignition-relevant properties. Rigorous prescreening and testing efforts are involved to evaluate fuels to comply with engines equipped with advanced combustion modes. The testing of some of these fuels implies low quantity fuel samples, access to relevant temperature and pressure conditions, high reproducibility, and a high throughput rate. In light of these considerations, a Miniaturized Ignition Screening Rapid Compression Machine (MISR) has been developed and built at the University of Illinois Chicago (UIC). Some design features include a smaller bellows-actuated driver section compared to other RCM designs, an adjustable brake section, and full optical access. The setup is designed to achieve reaction conditions (T > 600K and P < 100 bar with repetition rates of about 8 seconds per experiment). These conditions are relevant to low-to-intermediate temperature auto-ignition and can generate data for developing relevant chemical kinetics models or ignition maps. A brief insight into MISR design and its operating mechanism is shown. Also, to demonstrate the performance characteristics of the MISR, Ignition Delay (I.D) experiments for ethanol fuel at different equivalence ratios (Φ) are discussed in the context of plans with additional optical diagnostics, high-speed imaging, and gas sampling experiments.

Tomar, Mukul↗

Genetic Algorithms for Rapid Molecular Materials Screening

This project developed efficient methods for rapid computational screening of conjugated polymers and oligomers with optimal or near-optimal photovoltaic, dielectric, spintronic, and other unique electronic structure properties using genetic algorithms (GA). A key promise of organic materials is that using the incredible tailorability of synthetic organic chemistry enables experimental optimization of performance across multiple relevant properties (e.g., organic photovoltaics, organic lasers). The fundamental challenge is inverse design: how does one find the molecular or polymer structures with desired properties in the face of a near-infinite (e.g., >10 20 - 10 60 ) number of possible molecular structures, combined with time-consuming experiments or electronic structure calculations.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

NETL’s Perspective on Storage Efficiency and CO2-SCREEN

Carbon capture and storage (CCS) is a process that captures carbon dioxide (CO2) by separating it from anthropogenic emissions sources before atmospheric release and storing that CO2 in deep geologic reservoirs. CCS is a powerful method for reducing anthropogenic CO2 which can ultimately diminish the effects of climate change. Prospective CO2 storage resource is the amount of carbon dioxide that can be stored in a given geologic formation typically given as a mass (e.g., metric tons). Obtaining accurate estimates of CO2 storage resources is necessary for governments and industries to make energy-related policy decisions. Researchers at the National Energy Technology Laboratory (NETL) under the Department of Energy (DOE) developed a methods and a tool [CO2-SCREEN (Storage prospeCtive Resource Estimation Excel aNalysis) to estimate prospective carbon storage resources for saline formations, unconventional shale formations, and residual oil zones. The methods and tool provide CO2 storage and efficiency outputs in the form of probability estimates (i.e. P10 and P90) as well as partitioning storage and efficiency estimates based on storage mechanism (total, free phase, sorbed phase, and dissolution phase). This presentation will focus on how storage efficiency is calculated based on numerical modeling efforts, how it’s applied in the storage methods and tool, and then highlighting needs for future development.

Hanson, Angela Goodman↗

Manufacturing of Fabric Electrodes using a High-Throughput Screening Platform for Redox Flow Batteries

The objective of this project is to establish a new manufacturing methodology with machine learning- based high-throughput screening for the design and development of hierarchical structured, high-performance fabric electrodes for redox flow batteries (RFBs). The end goal of the project is to design and manufacture fabric electrodes for RFB applications that can provide 250 mA/cm2 current density operation for 100-cycles with 80% average energy efficiency. This was accomplished by first examining the structure-performance-property linkages of the electrodes provided by our partner, AvCarb. The electrodes’ microstructure was characterized by determining their pore size distribution, tortuosity, specific surface area, and porosity. The ohmic, charge transfer and mass transfer resistances were then calculated using electrochemical impedance spectroscopy. Carbon cloth electrodes showed the greatest resistance, which was dominated by charge transfer resistance, which we believe is related to the surface functionalization. Full cell cycling was used in order to determine the area specific resistance and energy efficiency of the cells. All of this experimental data and the results of the mathematical model (to increase the amount of inputs with parametric sweeping) were used to develop a machine learning-based model for the design of high-performance fabric electrodes. Using the results from the machine learning tool, optimized electrodes were fabricated by AvCarb. The ohmic, charge transfer and mass transfer resistances for these new electrodes were measured, and both performed better than any of the initial samples which had been provided by AvCarb.

25 ENERGY STORAGE↗

Techno-Economic Screening Analysis of CO2 Removal Through Enhanced Weathering

Terrestrial enhanced weathering has emerged as a technology of interest due to its simplicity, low energy requirement, and potentially low capital investment requirement. Due to the novelty of this technology, there is limited literature exploring the techno-economics of the process. This presentation reports on a screening techno-economic analysis that examines the impact of key factors that influence terrestrial enhanced weathering performance and cost. Two cases are considered for analysis, based on the material used: (1) Naturally occurring mined igneous rock (2) Industrial waste materials (like biomass ash or cement kiln dust) The analysis considers locating the terrestrial enhanced weathering system in the Midwestern United States, because of proximity to alkaline materials, availability of farmland, and appropriate ambient conditions for weathering. For the igneous rock case, the size of the system is based on the average amount of igneous rock available from a single mine—250,000 tonnes/year. For the industrial waste case, the size of the system is based on the amount of suitable waste material produced by an industrial hub—150,000 tonnes/year.

Leptinsky, Sarah↗

The Screening Tool for Industrial Resilience: Risk-Informed Decision Making to Support Resilience Planning

The Screening Tool for Industrial Resilience (STIR) helps small and medium-sized manufacturing plants manage risk to their production. Developed by the Pacific Northwest National Laboratory under direction and funding from the Department of Energy’s Office of Manufacturing and Energy Supply Chains, the STIR helps manufacturers enhance their resilience to a variety of disruptive events, both natural and human-caused, that could interrupt normal operations. This report provides an overview of the STIR’s risk-informed, high-level approach to resilience planning, which identifies potential solutions that could enhance site resilience based on calculated major risk drivers.

97 MATHEMATICS AND COMPUTING↗

Enhanced Weathering Screening Techno-Economic Analysis

This presentation reports on a screening techno-economic analysis that examines the impact of key factors that influence terrestrial enhanced weathering performance and cost. Two cases are considered for analysis based on the material used: (1) Naturally occurring mined igneous rock (2) Industrial waste materials (like biomass ash or cement kiln dust) The analysis considers locating the terrestrial enhanced weathering system in the Midwestern United States, because of proximity to alkaline materials, availability of farmland, and appropriate ambient conditions for weathering. For the igneous rock case, the size of the system is based on the average amount of igneous rock available from a single mine—250,000 tonnes/year. For the industrial waste case, the size of the system is based on the amount of suitable waste material produced by an industrial hub—150,000 tonnes/year.

Leptinsky, Sarah↗