Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “routing”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,279 records · Page 71
All sourcesNASA NTRSDOE OSTI
DOE OSTI2025

Toward solar light-driven photochemical carbon dioxide separation

The feasibility of energy-efficient photochemically driven CO 2 release has been demonstrated in several recent reports, but the regeneration step remains much slower. Recently in Chem, Ahmad et al. reported a fully visible-light-driven CO 2 separation system capable of operating with concentrated sunlight. Here, we discuss this advance and the potential route toward large-scale fully photochemical CO 2 capture.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Hot-pressed 6 LiInSe 2 for use as a ceramic radiation detector

Lithium based chalcogenides have many uses in the nuclear science field. 6 LiInSe 2 (or LISe) has been researched extensively because of its ability to operate in both scintillator and semiconductor modes. Here, this makes it useful in applications including nuclear material detection for national security, space applications, and medical imaging. In some applications growth and fabrication costs are of concern, as it takes upwards of 40 days to synthesize a charge, grow a crystal and fabricate a detector. Ceramics are a solution for this long route of preparation. This research shows that using a 6 LiInSe 2 ceramic instead of a single crystal significantly decreases the time required to make a detector. In the present work, ceramic wafers can be formed using a mechanical press equipped with a heating attachment. The resulting ceramic wafer performs very similar to a slow-growth single crystal when used in the scintillator mode.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Omics-guided metabolic pathway discovery in plants: Resources, approaches, and opportunities

Plants produce a vast array of metabolites, the biosynthetic routes of which remain largely undetermined. Genome-scale enzyme and pathway annotations and omics technologies have revolutionized research to decrypt plant metabolism and produced a growing list of functionally characterized metabolic genes and pathways. However, what is known is still a tiny fraction of the metabolic capacity harbored by plants. Here, in this work, we review plant enzyme and pathway annotation resources and cutting-edge omics approaches to guide discovery and characterization of plant metabolic pathways. We also discuss strategies for improving enzyme function prediction by integrating protein 3D structure information and single cell omics. This review aims to serve as a primer for plant biologists to leverage omics datasets to facilitate understanding and engineering plant metabolism.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2026

Learning from nature’s plant engineers: Hijacking metabolism and development beyond genetics

Plant metabolism underpins the food, fiber, and fuel that support our economy, driving strong interest in new strategies to rewire plant metabolism for emerging applications. While most synthetic biology efforts are reliant on genetic engineering, plants can be manipulated in many other ways that remain comparatively underexplored. Across nature, diverse organisms, including bacteria, fungi, and insects, have evolved sophisticated mechanisms to exploit plant metabolic richness, reshaping it for purposes that span from basic nutrition to the construction of complex, novel structures for shelters. These interspecies interactions and non-model systems represent unique manners in which plants can be reprogrammed or hijacked by other organisms, offering inspiration for novel approaches to engineering plant metabolism. By better understanding the basis of how organisms induce these remarkable transformations in plants, we can expand the conceptual boundaries of synthetic biology and reveal alternative routes to manipulating plants for the production of a diverse array of valuable compounds and materials. Deeper insight into these mechanisms will yield novel blueprints for rethinking the scope and breadth in which we can redesign plant metabolism across many applications.

Sarkiss, Anthony E. [University of California, Ber↗
DOE OSTI2022

57 Zn β-delayed proton emission establishes the 56 Ni rp-process waiting point bypass

We measured the 57 Zn β-delayed proton (βp) and γemission at the National Superconducting Cyclotron Laboratory. We find a 57 Zn half-life of 43.6 ± 0.2ms, βp branching ratio of (84.7 ±1.4)%, and identify four transitions corresponding to the exotic β-γ-pdecay mode, the second such identification in the fp-shell. The p/γratio was used to correct for isospin mixing while determining the 57 Zn mass via the isobaric multiplet mass equation. Previously, it was uncertain as to whether the rp-process flow could bypass the textbook waiting point 56 Ni for astrophysical conditions relevant to Type-I X-ray bursts. Our results definitively establish the existence of the 56 Ni bypass, with 14-17% of the rp-process flow taking this route.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2025

In situ probing of structure and deagglomeration of SnO 2 colloids via small-angle X-ray scattering

Transforming dry nanopowders into stable colloidal dispersions remains challenging due to the cohesive forces between the nanoparticles (NPs) which promote agglomeration. Effective dispersion and deagglomeration of these agglomerates is a critical process in the formulation and preparation of nanoparticle-based functional materials via the colloidal route. Understanding the deagglomeration dynamics provides information to improve microstructural quality in various applications by enabling engineering of agglomerate size, structure and morphology. However, the deagglomeration process dynamics with respect to the evolution of the fractal agglomerate structures, particularly for very small NPs, is still poorly understood and requires further investigation. This study employs in situ small-angle X-ray scattering (SAXS) to investigate the sonication-induced deagglomeration of SnO 2 NPs. Electrostatically stabilized SnO 2 colloids with varying primary particle size (6–21 nm) are investigated in a specifically designed in situ cell using synchrotron-based SAXS to study the influence of sonication time and intensity on the nanoscaled agglomerates. Complete structural analysis via SAXS reveals a direct correlation between changes in agglomerate size and structure, size-dependent deagglomeration behavior and a dependence on the overall energy introduced during sonication into the dispersion regardless of the actual power as well as ultrasonic process parameters in case of SnO 2 NPs. The results suggest that control of the dispersion process during ultrasonic deagglomeration results in tailoring agglomerates with respect to size and structure.

Deagglomeration↗
DOE OSTI2022

Experimental and modeling study of water time histories during H 2 S-N 2 O combustion in a shock tube

Here, with the interest in directly burning sour gas in gas turbines, and the fact that even small amounts of H 2 S or its combustion products can alter combustion characteristics, many research studies have been performed to better understand the combustion chemistry of H 2 S. In the present study, the water formation was followed by laser absorption with N 2 O as an oxidant, instead of O 2 . Nitrous Oxide being essentially consumed via N 2 O (+M) ⇌ N 2 + O (+M), the water formation via the H 2 S + O route can then be probed to further validate the models. Three H 2 S/N 2 O mixtures diluted in 98% Ar were studied to cover the following range of equivalence ratios: 0.5, 1.0, and 2.0, over a wide range of temperatures (1580–1940 K) around atmospheric pressure. A chemical kinetic model was then developed first by validating the base N 2 O kinetics mechanism, then by investigating the experimental results presented herein. The N 2 O kinetics mechanism was updated with recent work on the low- and high-pressure limits for N 2 O decomposition (N 2 O (+M) ⇌ N 2 + O (+M)) as well as a review of rate coefficients for N 2 O + H ⇌ N 2 + OH from the literature. Good agreement is shown for H 2 /N 2 O mixtures. Updates were then made to the H 2 S kinetics mechanism, specifically, an update from the literature on SO 2 + H (+M) ⇌ SO + OH (+M) and an adjustment to SO + SH ⇌ S 2 + OH. Additionally, reactions between SH and N 2 O were determined using W1BD data and transition state theory which required the addition of an NNS sub-mechanism. With these updates, the mechanism provides good agreement with the H 2 S/N 2 O experiments.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗
DOE OSTI2024

Styrene Thermal Decomposition and Its Reaction with Acetylene under Shock Tube Pyrolysis Conditions: an Experimental and Kinetic Modeling Study

Styrene is an important compound for polymer production and a key intermediate in gas-phase kinetics of polycyclic aromatic hydrocarbons (PAHs). For the first time, the pyrolysis of styrene with and without the presence of acetylene is investigated in a single-pulse shock tube coupled to gas chromatography and mass spectrometry. For each reaction system, quantitative speciation profiles are probed within the temperature range of 1100-1730 K, nominal pressure of 20 bar, and reaction duration of similar to 4 ms. A kinetic model is built to simulate the results. The model explains how styrene is consumed under high-pressure pyrolytic conditions, how the secondary chemistry of intermediate products affect subsequent PAH formation, and how acetylene addition alters the reaction pathways. Throughout the temperature range, styrene breakdown is dominated by the bimolecular interaction between styrene and hydrogen atom, which produces benzene+vinyl or phenyl and ethylene through the stabilization of 2-phenylethyl and its subsequent dissociation. As a result, large amounts of phenyl accumulate, which react with styrene to form C14H12 species while simultaneously releasing H atoms through addition/elimination reactions. The reactivity of fuel consumption is preserved by the regeneration of H atoms as chain carriers. Several C14H10 compounds are formed as a result of the following breakdown of the C14H12 isomers, particularly stilbene, 1,1-diphenyl ethylene, and 9-methyl-9H-fluorene. The presence of acetylene as a co-reactant with styrene allows the Hydrogen-Abstraction-Acetylene-Addition (HACA) pathway to proceed from phenyl radical to enhance the production of phenylacetylene at very low temperatures and acenaphthylene. This hinders the formation of C14H12 isomers, exclusive products from pure styrene dissociation by competing with the styrene+phenyl routes.

Kinetic Modeling↗
DOE OSTI2024

Formation of five-membered ring structures via reactions of o -benzyne

The formation of five-membered ring structures is important for the generation of curved and bowl-shaped polycyclic aromatic hydrocarbons (PAHs) under combustion conditions. Here, we report the identification of the indenyl (C 9 H 7 ) radical – the simplest aromatic hydrocarbon radical carrying an adjacent five- and six-membered ring, as the major product of the o-benzyne (o-C 6 H 4 ) reaction with propargyl (C 3 H 3 ). Because real flames exhibit a complex chemistry, elucidation of a specific reaction is very challenging. Instead, we studied the o-C 6 H 4 + C 3 H 3 reaction in a resistively heated microtubular SiC reactor at controlled conditions of 1150 K and a pressure near 10–20 Torr. To this end, the reactants o-benzyne and propargyl were pyrolytically generated from benzoyl chloride and propargyl bromide. We identified the reactants and the indenyl radical isomer-selectively utilizing photoion mass-selected threshold photoelectron spectroscopy (ms-TPES). In conclusion, the experimentally observed predominant formation of indenyl radicals finally confirms the theoretical predictions of Matsugi and Miyoshi [Phys. Chem. Chem. Phys. 14 (2012), 9722–9728] and highlights a versatile route for the formation of five-membered rings and curved PAHs via reactions of o-benzyne that favor the formation of multiring species over aliphatically substituted aromatic species.

Molecular-weight growth↗
DOE OSTI2025

Analysis of soot formation from aviation fuels in laminar counterflow flames

Combustion emissions from aviation contribute to the formation of condensation trail (contrail) that can lead to the formation of anthropogenic cirrus clouds. Ice particles that form contrails are observed to have a linear correlation with soot particle number density. Synthetic aviation fuels (SAFs) offer a promising route to mitigate the production of soot particles while also increasing energy security. Although studies have focused on combustion and spray behavior, the detailed investigation of soot formation processes for different jet fuels and their impact on models for computational fluid dynamics (CFD) applications is not well understood. Moreover, experimental measurements of soot for canonical flames using Synthetic aviation fuels (SAF) for model validation remain scarce. To address this, we use employed the Lawrence Livermore National Laboratory (LLNL) detailed soot model based on the discrete sectional method. Additionally, we develop two reduced chemical mechanisms for Jet-A and Alcohol-to-Jet (C1) that are suitable for turbulent flame simulations and couple them with the Hybrid Method of Moments (HMOM). The detailed and reduced model frameworks are validated against experimental measurements of soot volume fraction (ƒ ν ) from a counterflow burner experiment previously reported in the literature. Given the good agreement between modeling results and experimental measurements for the (1) spatial distribution of ƒ ν and (2) the non-linear variation of peak ƒ ν with strain rate, we further investigate the modeled sub-processes (nucleation, condensation, surface growth, and oxidation) using the LLNL model to analyze the assumptions in the reduced model framework. Furthermore, the results indicate a significant contribution from resonant radicals to the surface growth of soot particles, which are not accounted for in the current implementation of HMOM and could help reconcile soot predictions by the reduced model with observations.

Counterflow↗
DOE OSTI2026

From PAH to fullerenes: Closing a nano bowl with a nano lid

Quantum chemical DLPNO-CCSD(T)/cc-pVDZ//B3LYP/6–31G(d) calculations have been performed to unravel the formation mechanism of buckminsterfullerene (C 60 ) via the reaction of the C 40 nano bowl (C 40 H 10 ) and corannulene (C 20 H 10 ). The generated potential energy surfaces and molecular properties were further utilized to evaluate equilibrium constants and rate constants of elementary chemical reactions involved in the C 60 synthesis. The overall C 40 H 10 + C 20 H 10 → C 60 + 10H 2 reaction is shown to be highly exoergic and hence thermodynamically favorable at temperatures above 700 K and a kinetically feasible pathway under high-temperature conditions was revealed. This route involves hydrogen atom abstraction steps to activate closed-shell reactants/intermediates alternating with cyclodehydrogenation reactions eventually zipping the edges between the reacting C 40 and C 20 units by consecutive closures of six- and five-membered rings between them. The reaction is driven/catalyzed by hydrogen atoms which carry out the hydrogen abstractions from C 60 H x and are later recovered on the cyclodehydrogenation stages. The initial association reaction, C 40 H 9 + C 20 H 10 → C 60 H 18 + H, linking the two units by a covalent C-C bond appears to represent the kinetic bottleneck of the whole multistep process. This reaction is fast at low temperatures but slows down and has its equilibrium shifted toward the reactants at high temperatures. Here, the feasibility of the proposed mechanism corroborates the hypothesis that C 60 can be produced through a series of elementary reactions typical for the PAH growth.

Equilibrium constant↗
DOE OSTI2026

Pressure-dependent kinetics of cyclopentene consumption

Recent experiments have uncovered deficiencies in the ability of current kinetic models for cyclopentane combustion to predict species profiles as a function of O2 concentration. One likely source of these discrepancies flows from the limited availability of relevant kinetic data for key functionalized intermediates, requiring the use of distant analogies to estimate their rates. This work fills this gap for cyclopentene, the most prominent C5 intermediate in low-temperature cyclopentane combustion. Ab initio transition-state-theory based master equation methods are used to calculate pressure-dependent rate constants across four potential energy surfaces (C5H8 + OH, C5H8 + HO2, C5H7, and C5H7 + O2). Potential energy surfaces are characterized at the CCSD(T)-F12/cc-pVDZ-F12//revDSD-PBEP86-D3BJ/def2-TZVPP level of theory. Pressure-dependent rate constants and branching fractions are determined via 1D master equation calculations. The results are used to analyze the competition for radicals between cyclopentene and cyclopentane in the intermediate temperature region, and to identify the dominant pathways flowing from these initiation channels. On the OH initiation surface, we find good agreement with recently published experimental rate constants at high temperature, and we elucidate the complex temperature dependence below 800 K, where 𝜋𝜋 addition becomes prominent. On the HO2 initiation surface, we find an interesting alternative route to bicyclic ether formation via well-skipping over the HO2 adduct well. On the cyclopentenyl radical surface, the major product is cyclopentadiene plus H. On the cyclopentenyl + O2 surface, we find that resonance stabilization largely prevents the allylic radical from undergoing oxidation, whereas the alkylic radical has a somewhat elevated propensity for oxidation pathways relative to cyclopentyl.

ab initio calculations↗
DOE OSTI2022

Synthetic biodegradable polyhydroxyalkanoates (PHAs): Recent advances and future challenges

This article reviews the advances made over the past five decades of research in developing effective chemocatalytic pathways to synthesize polyhydroxyalkanoates (PHAs), a prominent class of biodegradable polyesters found in nature and considered as sustainable alternatives to petroleum-based non-degradable plastics. Focused in this review are recent efforts that seek to address the key challenges facing the biosynthetic routes by taking advantage of precision in synthesis, expedient tunability in polymer stereomicrostructures and structures of monomers and molecular catalysts, as well as scalability and speed in polymer production that chemical catalysis can offer. This article is organized by poly(3-hydroxybutyrate) (P3HB) stereomicrostructures (tacticities), from isotactic to syndiotactic to atactic P3HB materials, followed by other PHA homopolymers and copolymers. Under each type of stereochemically defined PHAs, monomers, catalysts, and polymerizations employed for the synthesis, as well as mechanistic aspects when possible, are described. Next, recent advances in expanding the PHA scope and developing functionalized, uncommon or unnatural PHAs, inaccessible by biological methods, especially block and stereoblock or stereosequenced PHAs, are highlighted in their synthetic methods and advanced materials properties. As a result, four key remaining challenges, and thus corresponding future directions directed at addressing those challenges, are discussed.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Directionally supervised cellular automaton for the initial peopling of Sahul

Reconstructing the patterns of Homo sapiens expansion out of Africa and across the globe has been advanced using demographic and travel-cost models. However, modelled routes are ipso facto influenced by migration rates, and vice versa. We combined movement ‘superhighways’ with a demographic cellular automaton to predict one of the world's earliest peopling events — Sahul between 75000 and 50000 years ago. Novel outcomes from the superhighways-weighted model include (i) an approximate doubling of the predicted time to continental saturation (~10,000 years) compared to that based on the directionally unsupervised model (~5000 years), suggesting that rates of migration need to account for topographical constraints in addition to rate of saturation; (ii) a previously undetected movement corridor south through the centre of Sahul early in the expansion wave based on the scenarios assuming two dominant entry points into Sahul; and (iii) a better fit to the spatially de-biased, Signor-Lipps-corrected layer of initial arrival inferred from dated archaeological material. Our combined model infrastructure provides a data-driven means to examine how people initially moved through, settled, and abandoned different regions of the globe.

29 ENERGY PLANNING, POLICY, AND ECONOMY↗
DOE OSTI2024

A review of criticality dosimetry at the Y-12 National Security Complex and practical importance of dose accuracy in emergency response

A nuclear criticality results in the emission of both neutron and gamma radiation and can produce doses to personnel near the event that exceed 0.1 Gy (10 rad). The primary purpose of nuclear accident dosimetry is to rapidly identify affected personnel in need of prompt medical treatment and to reassure personnel who have been only minimally exposed. While accurate dosimetry is desired, it must be recognized that dose determinations made from whole-body dosimeters or simple triage methods are very rough estimates and contain significant uncertainties. Even when accounting for factors like varying neutron energy spectra, mean photon energies, body orientation within the radiation field, and transient effects on dosimeter response, etc., the end value is a dosimetric quantity defined for very specific radiological conditions and determined within a simple phantom usually at a single depth. Of more importance is the biological response to the radiation, which will vary by person and can be affected by the individual’s radiation sensitivity, age, gender, mass, and underlying health conditions. The overall biological, person-specific response to a given dose cannot be precisely determined except by patient symptom observation and individual biological dosimetry (e.g. chromosome analysis, lymphocyte ratios, etc.). This work describes and discusses the criticality accident dosimetry program at the Y-12 National Security Complex, a United States Department of Energy National Nuclear Security Administration facility. In conclusion, the primary goals of the Y-12 accident dosimetry program are, among others, the rapid identification of significantly exposed persons, prompt routing of exposed workers for medical evaluation and treatment, and the ultimate processing of dosimeters to assign doses to personnel.

61 RADIATION PROTECTION AND DOSIMETRY↗
DOE OSTI2020

Electrochemical-assisted leaching of active materials from lithium ion batteries

The development of a circular economy for lithium-ion batteries (LIB) is essential to realize decarbonization and an electrified energy market. However, the current commercial operations that recover valuable constituents from LIBs require significant energy and reagents, which create toxic emissions and additional waste. We report an electrochemical-based method for leaching valuable metals from the active materials of mixed shredded LIBs. In this process, the use electrons, as green reagent, allows the use and regeneration of Fe 2+ in low concentrations as substitute for hydrogen peroxide as a reducing agent. Leaching in a membrane separated two-compartment electrochemical cell contributes to decrease the acid requirements as H+ can be generated electrochemically. With this design, leaching efficiencies over 96% for the active metals (Li, Co, Mn, and Ni) were demonstrated at pulp densities up to 240 g/L. Copper present in the active material is electrowon and recovered separately. Preliminary cost analyses demonstrate ca. 80% reduction in energy and chemical costs as compared to traditional hydrometallurgical routes.

25 ENERGY STORAGE↗
DOE OSTI2022

The Circular Economy Life Cycle Assessment and Visualization Framework: A Multistate Case Study of Wind Blade Circularity in United States

A circular economy (CE) aims to decouple human activities from economic activities and resource use, and its overall goal is reducing or avoiding negative environmental externalities. The newly developed Circular Economy Lifecycle Assessment and Visualization (CELAVI) framework simulates changes in supply chain environmental impacts as it transitions toward circularity. This study expands CELAVI by incorporating detailed spatial resolution and real-world road routes connecting all facilities within the system. The case study on end-of-life decision making of wind turbine blades in the states of Iowa and Missouri explores how supply chain circularity and environmental impacts are affected by pathway costs and level of wind turbine installations. It demonstrates how high circularity costs might be beneficial for circularity transitions given revenue generated from circular pathways. Finally, impacts have important contributions to the supply chain design and thus show the importance of including detailed spatial resolution in CELAVI and CE studies in general.

circular economy↗