Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “phase transformations”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,279 records · Page 71

Structure, magnetism, and electron-transport properties of Mn{sub 2}CrGa-based nanomaterials

Mn{sub 2}CrGa in the disordered cubic structure has been synthesized using rapid quenching and subsequent annealing. The cubic phase transforms to a stable tetragonal phase when a fraction of Cr or Ga is replaced by Pt or Al, respectively. All samples are ferrimagnetic with high Curie temperatures (T{sub c}); Mn{sub 2}CrGa exhibits the highest T{sub c} of about 813 K. The tetragonal samples have appreciable values of magnetocrystalline anisotropy energy, which leads to an increase in coercivity (H{sub c}) that approaches about 10 kOe in the Pt-doped sample. The H{sub c} linearly increases with a decrease of temperature, concomitant with the anisotropy change with temperature. All samples are metallic and show negative magnetoresistance with room-temperature resistivities on the order of 1 mΩcm. The magnetic properties including high T{sub c} and low magnetic moment suggest that these tetragonal materials have potential for spin-transfer-torque-based devices.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Crystallographic and magnetic investigations of textured bismuth ferrite lead titanate layers

In present work we demonstrate the synthesis of textured 60BiFeO 3 –40PbTiO 3 (60:40 BFPT) by using the templated grain growth technique with platelets of BaTiO 3 . Synthesised 60:40 BFPT has been examined by High-energy x-ray diffraction utilizing a synchrotron x-ray source. The crystallographic structure refinement results revealed the co-existence of monoclinic and tetragonal phases. By employing an external electric field, the mixed monoclinic/tetragonal phases transformed to the predominantly tetragonal phase. In addition, a crystallographic texture refinement was completed on unpoled state of 60:40 BFPT which showed the sample had 1.3 multiples of random distribution (MRD) $\{100\}$ crystallographic textured in tetragonal phase. However, magnetic measurements showed isotropic ferromagnetism for the sample which is not in agreement with the crystallographic texture properties of the sample. Low temperature magnetic transition has been found in zero field cooled—field cooled (ZFC-FC) measurements. This could be due to the possible existence of a secondary magnetic phase, which dominated the magnetic result.

36 MATERIALS SCIENCE↗

Free energy of grain boundary phases: Atomistic calculations for Σ 5 ( 310 ) [ 001 ] grain boundary in Cu

Atomistic simulations are employed to demonstrate the existence of a well-defined thermodynamic phase transformation between grain boundary (GB) phases with different atomic structures. The free energy of different interface structures for an embedded-atom-method model of the Σ5 (310) [001] symmetric tilt boundary in elemental Cu is computed using the nonequilibrium Frenkel-Ladd thermodynamic integration method through molecular dynamics simulations. It is shown that the free-energy curves predict a temperature-induced first-order interfacial phase transition in the GB structure in agreement with computational studies of the same model system. Moreover, the role of vibrational entropy in the stabilization of the high-temperature GB phase is clarified. The calculated results are able to determine the GB phase stability at homologous temperatures less than 0.5, a temperature range particularly important given the limitation of the methods available hitherto in modeling GB phase transitions at low temperatures. Lastly, the calculation of GB free energies complements currently available 0 K GB structure search methods, making feasible the characterization of GB phase diagrams.

36 MATERIALS SCIENCE↗

Topological defect dynamics in operando battery nanoparticles

Topological defects can markedly alter nanomaterial properties. This presents opportunities for "defect engineering," where desired functionalities are generated through defect manipulation. However, imaging defects in working devices with nanoscale resolution remains elusive. We report three-dimensional imaging of dislocation dynamics in individual battery cathode nanoparticles under operando conditions using Bragg coherent diffractive imaging. Dislocations are static at room temperature and mobile during charge transport. During the structural phase transformation, the lithium-rich phase nucleates near the dislocation and spreads inhomogeneously. The dislocation field is a local probe of elastic properties, and we find that a region of the material exhibits a negative Poisson's ratio at high voltage. Operando dislocation imaging thus opens a powerful avenue for facilitating improvement and rational design of nanostructured materials.

25 ENERGY STORAGE↗

Discharge, Relaxation, and Charge Model for the Lithium Trivanadate Electrode: Reactions, Phase Change, and Transport

The electrochemical behavior of lithium trivanadate (LiV 3 O 8 ) during lithiation, delithiation, and voltage recovery experiments is simulated using a crystal-scale model that accounts for solid-state diffusion, charge-transfer kinetics, and phase transformations. The kinetic expression for phase change was modeled using an approach inspired by the Avrami formulation for nucleation and growth. Numerical results indicate that the solid-state diffusion coefficient of lithium in LiV 3 O 8 is ~ 10 -13 cm 2 s -1 and the equilibrium compositions in the two phase region (~2.5 V) are Li 2.5 V 3 O 8 :Li 4 V 3 O 8 . Agreement between the simulated and experimental results is excellent. Relative to the lithiation curves, the experimental delithiation curves show significantly less overpotential and at low levels of lithiation (end of charge). Simulations are only able to capture this result by assuming that the solid-state mass-transfer resistance is less during delithiation. The proposed rationale for this difference is that the (100) face is inactive during lithiation, but active during delithiation. Finally, by assuming non-instantaneous phase-change kinetics, estimates are made for the overpotential due to imperfect phase change (supersaturation).

25 ENERGY STORAGE↗

Microstructure Anisotropy Effects on Fracture and Fatigue Mechanisms in Shape Memory Alloy Martensites

The chief scientific object was to investigate the fatigue and fracture mechanisms in NiTi shape memory alloys, in the presence of stress concentrating factors such as micro-pores and notches. In particular, the interactions between structure (factors related to the geometry of the specimen, such as holes, pores and notches) and microstructure (related to properties of the material such as grains, secondary phases, twins) in influencing the inelastic deformation, leading up to fracture in NiTi was examined. Primarily, there were two major thrusts. The first thrust focused on fracture behavior in Shape Memory Alloys where the high crystal symmetry cubic phase transformed into the low symmetry phase during deformation and propagation of cracks. This thrust revealed the interplay between size of micro-pores, size of grains and grain orientations in determining the resistance to crack growth, during cyclic tensile deformation of porous-like NiTi specimens. The role of secondary phases (impurities of Ti, often formed during fabrication) were also shown to induce local inelastic deformation gradients during tensile deformation and reduce overall extent of deformation. The second thrust focused on the fatigue and fracture behavior in the low crystal symmetry martensite phase. Unlike high symmetry phases, characterization of deformation in low symmetry phases such as martensitic NiTi has been challenging, due to a hierarchical microstructure spanning from nanoscale twins to the macroscale, a highly anisotropic microstructure stemming from the low crystal symmetry and a multitude of inelastic mechanisms for deformation. Thus, advanced X-ray techniques such as 3D high-energy diffraction microscopy and x-ray micro-Laue diffraction and spectroscopy were used in conjunction with traditional techniques such as SEM and TEM to understand the inelastic deformation in the martensite phase in NiTi, in the presence of notches. This thrust revealed a stark difference in deformation mechanisms based on the nature of stress: regions near the notch experience a highly triaxial stress while those far away experience a uniaxial stress. Additionally, while regions close to the notch were shown to deform locally by amorphization/nanocrystallization, ultimately leading to fracture, regions far away from the notch deformed in a more traditional manner, with detwinning and twin reorientation the primary mechanisms of deformation. More importantly, this thrust revealed that in the presence of structural factors such as notches, the traditional picture of reorientation (coalescence) of nanoscale martensite twins into increasingly larger domains with increased loading does not hold true, even up to fracture of the specimen. These conclusions will inform the modeling and understanding of deformation behavior of specimens, where structure and microstructure coexist and interact.

36 MATERIALS SCIENCE↗

Noncollinear magnetic phases of a triangular-lattice antiferromagnet and of doped CuFeO2

We obtain the noncollinear ground states of a triangular-lattice antiferromagnet with exchange interactions up to third nearest neighbors as a function of the single-ion anisotropy D. At a critical value of D, the collinear phase transforms into a complex noncollinear phase with odd-order harmonics of the fundamental ordering wavevector Q. The observed elastic peaks at 2 x Q in both Al- and Ga-doped CuFeO2 are explained by a scalene distortion of the triangular-lattice produced by the repulsion of neighboring oxygen atoms.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

High-Temperature Phase Change Materials (PCM) Candidates for Thermal Energy Storage (TES) Applications

It is clearly understood that lower overall costs are a key factor to make renewable energy technologies competitive with traditional energy sources. Energy storage technology is one path to increase the value and reduce the cost of all renewable energy supplies. Concentrating solar power (CSP) technologies have the ability to dispatch electrical output to match peak demand periods by employingthermal energy storage (TES). Energy storage technologies require efficient materials with high energy density. Latent heat TES systems using phase change material (PCM) are useful because of their ability to charge and discharge a large amount of heat from a small mass at constant temperature during a phase transformation like melting-solidification. PCM technology relies on the energyabsorption/liberation of the latent heat during a physical transformation. The main objective of this report is to provide an assessment of molten salts and metallic alloys proposed as candidate PCMs for TES applications, particularly in solar parabolic trough electrical power plants at a temperature range from 300..deg..C to 500..deg.. C. The physical properties most relevant for PCMs servicewere reviewed from the candidate selection list. Some of the PCM candidates were characterized for: chemical stability with some container materials; phase change transformation temperatures; and latent heats.

14 SOLAR ENERGY↗

Phase stability of a eutectic high entropy alloy under extremes of pressures and temperatures

Additively manufactured high-entropy alloys are of interest because of their unique combination of high yield strength and large ductility achieved with far-from-equilibrium crystalline phases and micro/nanostructure morphology. We report on the phase transformation and thermal equation of state of the eutectic high-entropy alloy (EHEA) Al 18 Co 20 Cr 10 Fe 10 Ni 40 W 2 , produced by laser powder-bed fusion (L-PBF). The EHEA was studied in a large-volume Paris–Edinburgh cell using energy-dispersive x-ray diffraction to a pressure of 5.5 GPa and a temperature of 1723 K. Static compression studies in diamond anvil cells using angle-dispersive x-ray diffraction extended the high-pressure structural data to 317 GPa at ambient temperature. The initial dual-phase nanolamellar face-centered cubic (FCC) and body-centered cubic (BCC) structure of Al 18 Co 20 Cr 10 Fe 10 Ni 40 W 2 transforms into a single FCC phase under high pressure, with the BCC-to-FCC phase transformation completing at 9 ± 2 GPa. The FCC phase remained stable up to the highest pressure of 317 GPa. The measured thermal equation of state for the FCC phase of Al 18 Co 20 Cr 10 Fe 10 Ni 40 W 2 is presented up to 5.5 GPa and 1473 K. We observed melting of the EHEA at 1698 ± 25 K at a pressure of 5.5 GPa, and the recrystallized sample shows an increased fraction of the CsCl-type (B2) phase at ambient conditions following release from the high-pressure high-temperature state. The BCC-to-FCC phase transition completion pressure is correlated with the nanolamellae thickness of the BCC layer in this diffusion-less transformation at ambient temperature.

36 MATERIALS SCIENCE↗

Formation of omega phase induced by laser shock peening in Ti-17 alloy

Synchrotron-based high-energy X-ray diffraction and transmission electron microscopy were used to study the in-depth compressive residual strains and microstructure evolution in Ti-17 alloy subjected to two-sided laser shock peening (LSP). A noticeable difference was observed in the lattice strains and extents of peak broadening on the two sides of the sample. The compressive residual strain was smaller and the peak broadening was more pronounced on the bottom surface in comparison to the top surface. This is due to the β → ω phase transformation induced by LSP on the bottom surface. It was determined that the ω phase with fine particle morphology and incommensurate structure is located mainly in the 15 μm-thick layer under the bottom surface. The formation of the LSP-induced ω phase on the bottom surface can be attributed to the adiabatic increase in temperature due to the higher shock peak pressure on the bottom surface, and can result in the relaxation of the accumulated residual compressive strain in the original phases.

36 MATERIALS SCIENCE↗

Synthesis and characterization of three-dimensional flower-like tin dioxide-based structures

Three-dimensional flower-like SnO{sub 2}-based structures have been produced by the alkaline hydrothermal treatment of t-SnO{sub 2} powder with no additive and in the presence of aminoterephthalic acid (ATPA). The synthesis products have been characterized by a variety of physicochemical techniques (scanning electron microscopy, transmission electron microscopy, Raman and IR spectroscopies, X-ray diffraction, and others). The results demonstrate that raising the ATPA concentration in the reaction mixture changes the morphology of the materials and leads to the SnO{sub 2} → SnO{sub 2}/Sn{sub 3}O{sub 4} → Sn{sub 3}O{sub 4} phase transformation in the structures through the formation of SnO{sub x} nonstoichiometric tin oxide phases with 1 < x < 2. Hydrothermal treatment of the starting reagents in the presence of ≤75 wt % ATPA leads to the formation of hierarchical structures dominated by a nonstoichiometric tin oxide, which is thermally unstable at t ≥ 500°C. The morphology and phase composition of the synthesized structures have been shown to have a significant effect on the electronic conductivity of the material.

36 MATERIALS SCIENCE↗

Solid phase characterization and transformation of illite mineral with gas-phase ammonia treatment

In situ remediation applications of ammonia (NH 3 ) gas have potential for sequestration of subsurface contamination. Ammonia gas injections initially increase the pore water pH leading to mineral dissolution followed by formation of secondary precipitates as the pH is neutralized. However, there is a lack of understanding of fundamental alteration processes due to NH 3 treatment. In these batch studies, phyllosilicate minerals (illite and montmorillonite) were exposed to NH 3 gas with subsequent aeration to simulate in situ remediation. Following treatments, solids were characterized using a variety of techniques, including X-ray diffraction, N 2 adsorption-desorption analysis for surface area, Fourier transform infrared (FTIR) spectroscopy, nuclear magnetic resonance (NMR), and microscopy methods to investigate physicochemical transformations. The results of this study indicate that, at high pH, the clays are altered as observed by differences in morphology and particle size via microscopy. However, the two clays interact differently with NH 3 . While montmorillonite interlayers collapsed due to intercalation, illite layers were unaffected as confirmed by FTIR analysis. Further, structural changes in silicate ([SiO 4 ] n- ) and aluminol (Al-OH) groups were identified by NMR and FTIR. This research showed that mineral alteration processes occur during and after NH 3 gas treatment which may be used to remove radionuclides from the aqueous phase through sorption, co-precipitation, and coating with secondary phyllosilicate alteration products.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Lattice Instability during Solid-Solid Structural Transformations under a General Applied Stress Tensor: Example of Si I → Si II with Metallization

Here, the density functional theory was employed to study the stress-strain behavior and elastic instabilities during the solid-solid phase transformation (PT) when subjected to a general stress tensor, as exemplified for semiconducting Si I and metallic Si II, where metallization precedes the PT, so stressed Si I can be a metal. The hydrostatic PT occurs at 76 GPa, while under uniaxial loading it is 11 GPa (3.7 GPa mean pressure), 21 times lower. The Si I→Si II PT is described by a critical value of the phase-field’s modified transformation work, and the PT criterion has only two parameters given six independent stress elements. Our findings reveal novel, more practical synthesis routes for new or known high-pressure phases under predictable nonhydrostatic loading, where competition of instabilities can serve for phase selection rather than free energy minima used for equilibrium processing.

42 ENGINEERING↗

In situ X-ray diffraction study of the δ to α' isothermal martensitic transformation kinetics in a Pu–Ga alloy

The sequence of phase formation and the isothermal kinetics of the δ to α' phase transformation in a Pu–1.9 at.% Ga alloy are investigated with in situ X-ray diffraction at the Advanced Photon Source. It has been proposed that the formation of a γ' intermediate phase may be responsible for the unusual double-C curve kinetics reported for this isothermal martensitic transformation. While a γ' intermediate phase was not observed at either -120 °C or -155 °C, an unexplained shoulder on the δ (1 1 1) peak was detected at -155 °C. The isothermal kinetics of the δ → α' transformation appear to fit a Johnson–Mehl–Avrami–Kolmogorov equation, but the exponent is not described by existing JMAK theory. The double-C curve kinetics of the δ to α' transformation remain unresolved in plutonium science, and understanding this behavior is key to predicting phase stability in aging Pu–Ga alloys.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Fast x-ray microdiffraction techniques for studying irreversible transformations in materials.

A pair of techniques have been developed for performing time-resolved X-ray microdiffraction on irreversible phase transformations. In one technique capillary optics are used to focus a high-flux broad-spectrum X-ray beam to a 60 {micro}m spot size and a fast pixel array detector is used to achieve temporal resolution of 55 {micro}s. In the second technique the X-rays are focused with Kirkpatrick-Baez mirrors to achieve a spatial resolution better than 10 {micro}m and a fast shutter is used to provide temporal resolution better than 20 {micro}s while recording the diffraction pattern on a (relatively slow) X-ray CCD camera. Example data from experiments are presented where these techniques are used to study self-propagating high-temperature synthesis reactions in metal laminate foils.

43 PARTICLE ACCELERATORS↗

Effects of ultrasonic processing on phase transition of flame-synthesized anatase TiO{sub 2} nanoparticles

The effect of ultrasonic processing on the phase transformation of flame-synthesized anatase TiO{sub 2} nanoparticles heated to the rutile phase was investigated. TiO{sub 2} nanoparticles of various sizes were prepared using a coflow hydrogen diffusion flame and an ultrasonic processor. Smaller nanoparticles having a similar portion of anatase phase using the ultrasonic processor were produced. On the basis of scanning electron microscopy images and specific surface areas, we observed that smaller nanoparticles tended to be sintered more easily than larger nanoparticles. From X-ray diffraction analysis, we demonstrated that when heated, TiO{sub 2} nanoparticles synthesized using the ultrasonic processor at 60% of its maximum amplitude were transformed from the anatase phase to the rutile phase more easily than those formed without or with the ultrasonic processor operated at 20% of its maximum amplitude.

36 MATERIALS SCIENCE↗

Automated flaw detection scheme for cast austenitic stainless steel weld specimens using Hilbert-Huang transform of ultrasonic phased array data

The objective of this work is to develop processing algorithms to detect and localize flaws using ultrasonic phased-array data. Data was collected on cast austenitic stainless stell (CASS) weld specimens onloan from the U.S. nuclear power industry' Pressurized Walter Reactor Owners Group (PWROG) traveling specimen set. Each specimen consists of a centrifugally cast stainless stell (CCSS) pipe section welded to a statically cst(SCSS) or wrought (WRSS) section. The paper presents a novel automated flaw detection and localization scheme using low frequency ultrasonic phased array inspection singals from the weld and heat affected zone of the based materials. The major steps of the overall scheme are preprocessing and region of interest (ROI) detection followed by the Hilbert-Huang transform (HHT) of A-scans in the detected ROIs. HHT offers time-frequency-energy distribution for each ROI. The Accumulation of energy in a particular frequency band is used as a classification feature for the particular ROI.

36 MATERIALS SCIENCE↗

High-temperature stability of {alpha}-Ta{sub 4}AlC{sub 3}

Graphical abstract: In this study, stability of {alpha}-Ta{sub 4}AlC{sub 3} is investigated to test a hypothesized thermodynamically driven {alpha}-{beta} phase transformation. It is found that the {alpha} phase is stable up to 1600 {sup o}C, with impurities and point defects most likely increasing the stability of the {alpha}-Ta{sub 4}AlC{sub 3}. Highlights: {yields} Cold-pressed {alpha}-Ta{sub 4}AlC{sub 3} powders are annealed up to 1750 {sup o}C to test first-principles predictions of {alpha}-{beta} phase-stability reversal at 1600 {sup o}C. {yields} The {alpha}-Ta{sub 4}AlC{sub 3} samples are stable up to 1600 {sup o}C, with no indications of any {alpha}-{beta} transformation. {yields} Transmission electron microscopy shows zig-zag stacking sequence characteristic of {alpha}-Ta{sub 4}AlC{sub 3}, as well as tantalum oxide impurities. {yields} The XRD patterns suggest that defects such as vacancies or antisites may increase the stability of {alpha}-Ta{sub 4}AlC{sub 3}. -- Abstract: Cold-pressed {alpha}-Ta4AlC3 powders were annealed up to 1750 {sup o}C to test first-principles predictions of {alpha}-{beta} phase-stability reversal at 1600 {sup o}C. Up to 1600 {sup o}C, the {alpha}-Ta{sub 4}AlC{sub 3} samples were stable with no indications of any {alpha}-{beta} transformation, as shown by the strong characteristic X-ray diffraction peaks of {alpha}-Ta{sub 4}AlC{sub 3} and the zigzag stacking observed by transmission electron microscopy. These results show that, in this experimental situation, high temperature alone is not sufficient to cause the {alpha}-{beta} transformation.

36 MATERIALS SCIENCE↗