Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “phase stability”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,279 records · Page 71

Loss of biological control of enamel mineralization in amelogenin-phosphorylation-deficient mice

Amelogenin, the most abundant enamel matrix protein, plays several critical roles in enamel formation. Importantly, we previously found that the singular phosphorylation site at Ser16 in amelogenin plays an essential role in amelogenesis. Studies of genetically knock-in (KI) modified mice in which Ser16 in amelogenin is substituted with Ala that prevents amelogenin phosphorylation, and in vitro mineralization experiments, have shown that phosphorylated amelogenin transiently stabilizes amorphous calcium phosphate (ACP), the initial mineral phase in forming enamel. Furthermore, KI mice exhibit dramatic differences in the enamel structure compared with wild type (WT) mice, including thinner enamel lacking enamel rods and ectopic surface calcifications. Here, we now demonstrate that amelogenin phosphorylation also affects the organization and composition of mature enamel mineral. In this work, we compared WT, KI, and heterozygous (HET) enamel and found that in the WT elongated crystals are co-oriented within each rod, however, their c-axes are not aligned with the rods' axes. In contrast, in rod-less KI enamel, crystalline c-axes are less co-oriented, with misorientation progressively increasing toward the enamel surface, which contains spherulites, with a morphology consistent with abiotic formation. Furthermore, we found significant differences in enamel hardness and carbonate content between the genotypes. ACP was also observed in the interrod of WT and HET enamel, and throughout aprismatic KI enamel. In conclusion, amelogenin phosphorylation plays crucial roles in controlling structural, crystallographic, mechanical, and compositional characteristics of dental enamel. Thus, loss of amelogenin phosphorylation leads to a reduction in the biological control over the enamel mineralization process.

59 BASIC BIOLOGICAL SCIENCES↗

Engineering the atomic structure of sequence-defined peptoid polymers and their assemblies

Peptoids are a family of sequence-defined, non-natural biomimetic polymers which show excellent properties including good chemical and enzymatic stability and high structural tunability. The solid-phase submonomer synthesis method allows precise control over the identity and sequence of chemically diverse side chains, enabling the atomic engineering of their chemical structures for a variety of applications. This unprecedented level of structural control enables access to atomically defined three-dimensional chain conformations and assemblies, facilitating the design and optimization of a variety of nanoscale architectures that can function in biology and materials science. In order to approach the rational design of peptoid materials in a more predictive and precise manner, it is crucial to fully understand how chemical information, in the form of the monomer sequence, encodes their folding and assembly into structurally defined, functional 3D shapes. Furthermore, this perspective focuses on recent studies into the atomic engineering of peptoid nanostructures by examining the impact of sequence variations on their secondary and three-dimensional structures, as well as their functional properties.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Design and Characterization of ALD-Based Overcoats for Supported Metal Nanoparticle Catalysts

Supported metal nanoparticle (SMN) catalysts are enormously crucial for many catalytic applications. However, catalyst deactivation, caused by sintering and coke formation, is a ubiquitous problem that significantly undermines catalytic processing economics. The application of material overcoating onto supported metal nanoparticles by atomic layer deposition (ALD) offers the solution to inhibit catalyst deactivation. Herein, we discuss examples in which ALD has been used to stabilize SMN catalysts in gaseous and aqueous-phase reactions. We highlight the ALD tools and methods in coating high-surface-area catalysts. Besides, various techniques are introduced to understand better how to characterize the overcoating layer and the catalyst itself. Finally, the outlook for new techniques to characterize the ALD overcoated catalytic materials is discussed.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Engineering new limits to magnetostriction through metastability in iron-gallium alloys

Magnetostrictive materials transduce magnetic and mechanical energies and when combined with piezoelectric elements, evoke magnetoelectric transduction for high-sensitivity magnetic field sensors and energy-efficient beyond-CMOS technologies. The dearth of ductile, rare-earth-free materials with high magnetostrictive coefficients motivates the discovery of superior materials. Fe 1- x Ga x alloys are amongst the highest performing rare-earth-free magnetostrictive materials; however, magnetostriction becomes sharply suppressed beyond x = 19% due to the formation of a parasitic ordered intermetallic phase. Here, we harness epitaxy to extend the stability of the BCC Fe 1- x Ga x alloy to gallium compositions as high as x = 30% and in so doing dramatically boost the magnetostriction by as much as 10x relative to the bulk and 2x larger than canonical rare-earth based magnetostrictors. A Fe 1- x Ga x - [Pb(Mg 1/3 Nb 2/3 )O 3 ] 0.7 -[PbTiO 3 ] 0.3 (PMN-PT) composite magnetoelectric shows robust 90° electrical switching of magnetic anisotropy and a converse magnetoelectric coefficient of 2.0 × 10 -5 s m -1 . When optimally scaled, this high coefficient implies stable switching at ~80 aJ per bit.

36 MATERIALS SCIENCE↗

Investigating dry room compatibility of sulfide solid-state electrolytes for scalable manufacturing

All-solid-state batteries (ASSBs) are viewed as promising next-generation energy storage devices, due to their enhanced safety by replacing organic liquid electrolytes with non-flammable solid-state electrolytes (SSEs). The high ionic conductivity and low Young's modulus of sulfide SSEs make them suitable candidates for commercial ASSBs. Nevertheless, sulfide SSEs are generally reported to be unstable in ambient air. Moreover, instead of gloveboxes used for laboratory scale studies, large scale production of batteries is usually conducted in dry rooms. Thus, this study aims to elucidate the chemical evolution of a sulfide electrolyte, Li 6 PS 5 Cl (LPSCl), during air exposure and to evaluate its dry room compatibility. When LPSCl is exposed to ambient air, hydrolysis, hydration, and carbonate formation can occur. Moreover, hydrolysis can lead to irreversible sulfur loss and therefore LPSCl cannot be fully recovered in the subsequent heat treatment. During heat treatment, exposed LPSCl undergoes dehydration, decomposition of carbonate species, and reformation of the LPSCl phase. Lastly, LPSCl was found to exhibit good stability in a dry room environment and was subject to only minor conductivity loss due to carbonate formation. The dry room exposed LPSCl sample was tested in a LiNi 0.8 Co 0.1 Mn 0.1 O 2 |LiIn half-cell, exhibiting no significant loss of electrochemical performance compared with the pristine LPSCl, proving it to be compatible with dry room manufacturing processes.

36 MATERIALS SCIENCE↗

Controlling swelling in mixed transport polymers through alkyl side-chain physical cross-linking

Semiconducting conjugated polymers bearing glycol side chains can simultaneously transport both electronic and ionic charges with high charge mobilities, making them ideal electrode materials for a range of bioelectronic devices. However, heavily glycolated conjugated polymer films have been observed to swell irreversibly when subjected to an electrochemical bias in an aqueous electrolyte. The excessive swelling can lead to the degradation of their microstructure, and subsequently reduced device performance. An effective strategy to control polymer film swelling is to copolymerize glycolated repeat units with a fraction of monomers bearing alkyl side chains, although the microscopic mechanism that constrains swelling is unknown. Here we investigate, experimentally and computationally, a series of archetypal mixed transporting copolymers with varying ratios of glycolated and alkylated repeat units. Experimentally we observe that exchanging 10% of the glycol side chains for alkyl leads to significantly reduced film swelling and an increase in electrochemical stability. Through molecular dynamics simulation of the amorphous phase of the materials, we observe the formation of polymer networks mediated by alkyl side-chain interactions. When in the presence of water, the network becomes increasingly connected, counteracting the volumetric expansion of the polymer film.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Orbital stability analysis of hypothetical Earth-mass and Luna-mass moons in the Sagarmatha (HD 100777) star system

Abstract Six of the solar system planets have 150 confirmed moons (Earth—1, Mars—2, Jupiter—53, Saturn—53, Uranus—27, Neptune—14) and seven of them (Ganymede, Titan, Callisto, Io, the Moon, Europa, Triton) have masses >0.001 $M_\oplus$. However, no exomoons have yet been discovered despite the successful detection of ∼5000 exoplanets. We can infer, based on the solar system planets, that these exoplanets are capable of hosting one or more exomoons. In this paper, we study the possible existence of hypothetical Earth-mass and Luna-mass moons orbiting the Jupiter-mass planet, Laligurans (HD 100777b) in the Sagarmatha (HD 100777) star system by means of orbital stability. We apply long-term orbital integrations and the MEGNO (mean exponential growth of nearby orbits) chaos indicator to study the orbital stability of the moons and predict a phase-space region comprising periodic, chaotic, and unstable orbits. The phase spaces primarily constitute the moon's semimajor axis, which extends from the host planet's Roche radius to the Hill radius, and full range of eccentricity. Specific points are picked from three different regions of the MEGNO map and run as single-orbit integration for up to 10 billion periods of the innermost orbit. Furthermore, the lifetime and maximum eccentricity maps are generated from the direct integration to inspect the stable and unstable orbital configurations. The analyses of these maps, with the aid of time-series plots, show that both moons maintain stable orbits in the low-eccentricity regime and semimajor axis between the Roche limit and 28.4% of the Hill radius of the planet.

Gautam, Aayush (ORCID:0000000247257589)↗

Quantum phase estimation for a class of generalized eigenvalue problems

Quantum phase estimation provides a path to quantum computation of solutions to Hermitian eigenvalue problems Hv = λv , such as those occurring in quantum chemistry. It is natural to ask whether the same technique can be applied to generalized eigenvalue problems Av = λBv , which arise in many areas of science and engineering. Here, we answer this question affirmatively. A restricted class of generalized eigenvalue problems could be solved as efficiently as standard eigenvalue problems. A paradigmatic example is provided by Sturm-Liouville problems. Another example comes from linear ideal magnetohydrodynamics, where phase estimation could be used to determine the stability of magnetically confined plasmas in fusion reactors.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Spontaneous Hall effect enhanced by local Ir moments in epitaxial Pr 2 Ir 2 O 7 thin films

Rare-earth pyrochlore iridates ( RE 2 Ir 2 O 7 ) consist of two interpenetrating cation sublattices, the RE with highly frustrated magnetic moments, and the iridium with extended conduction orbitals significantly mixed by spin-orbit interactions. The coexistence and coupling of these two sublattices create a landscape for discovery and manipulation of quantum phenomena such as the topological Hall effect, massless conduction bands, and quantum criticality. Thin films allow extended control of the material system via symmetry-lowering effects such as strain. While bulk Pr 2 Ir 2 O 7 shows a spontaneous hysteretic Hall effect below 1.5 K, we observe the effect at elevated temperatures up to 15 K in epitaxial thin films on (111) yttria-stabilized zirconia (YSZ) substrates synthesized via solid-phase epitaxy. Similar to the bulk, the lack of observable long-range magnetic order in the thin films points to a topological origin. We use synchrotron-based element-specific x-ray diffraction and x-ray magnetic circular dichroism to compare powders and thin films to attribute the spontaneous Hall effect in the films to localization of the Ir moments. Further, we link the thin-film Ir local moments to lattice distortions absent in the bulklike powders. We conclude that the elevated-temperature spontaneous Hall effect is caused by the topological effect originating either from the Ir or Pr sublattice, with interaction strength enhanced by the Ir local moments. This spontaneous Hall effect with weak net moment highlights the effect of vanishingly small lattice distortions as a means to discover topological phenomena in metallic frustrated magnetic materials.

36 MATERIALS SCIENCE↗

Modeling and Validation of Offset Cancellation for Hybrid Photonic-Electronic Transimpedance Amplifier Using All-Electronic Circuits

Hybrid photonic-electronic circuits involving crossdomain feedback signals are difficult to validate and troubleshoot. This paper describes an approach to model and validate an offset-cancellation loop for a hybrid transimpedance amplifier (TIA) using all-electronic circuits. An equivalent electrical model is developed for the tunable interferometer attenuators used for offset trimming, and it includes test features to extract the system performance. The stability analysis of the system shows 75 ◦ of phase margin and 102 dB of gain margin. Measurement results demonstrate good agreement with analysis and successful TIA offset cancellation.

Marchant, Jared↗

Ion beam irradiation of ABO4 compounds with the fergusonite, monazite, scheelite, and zircon structures

The effects of irradiation on CaWO4, SrWO4, BaWO4, YVO4, LaVO4, YNbO4, and LaNbO4 were investigated on thin crystals using 1.0 MeV Kr ions at 50-1000 K. All of the ABO4 compounds can be amorphized with calculated damage cross sections (σa = 1/Fc0) in the range of ~0.30-1.09 × 10-14 cm2 ion-1 at zero Kelvin. The analysis of fluence-temperature data returned critical temperatures for amorphization (Tc) of 311 ± 1, 358 ± 90, 325 ± 19, 415 ± 17, 541 ± 6, 636 ± 26, and 1012 ± 1 K, respectively, for the compounds listed above. Compared with previous in situ irradiation of ABO4 orthophosphate samples using 0.8 MeV Kr ions, the Tc values of LaVO4 and YVO4 are higher than those of LaPO4 and YPO4 by 82 K and 124 K, respectively. The Tc values of the three scheelite structures, CaWO4, SrWO4, and BaWO4, indicate that they are the most radiation tolerant compounds under these conditions. The A-B cation anti-site energies, EfAB, determined by DFT range from 2.48 to 10.58 eV and are highly correlated with the A-B cation ionic radius ratio, rA/rB, but are not correlated with Tc across the different structure types, suggesting that the formation and migration energies of Frenkel defects play a more important role in damage recovery in these compounds. We also discuss the role of cation and anion charge/iconicity as determined by DFT. ABO4 compounds with the zircon structure and B = P or V have a distinct advantage over those with B = Si as the damaged regions do not appear to be significantly affected by polymerization of (PO4) 3- or (VO4) 3- groups which might stabilize the amorphous fraction and ultimately lead to phase separation as observed in zircon (ZrSiO4).

amorphization↗

PHASE CHANGE MATERIAL FOR THERMAL ENERGY STORAGE IN BUILDINGS BASED ON SODIUM SULFATE DECAHYDRATE AND DISODIUM HYDROGEN PHOSPHATE DODECAHYDRATE

The worldwide increasing energy demand and 2050 net zero carbon target urge the globe to solve the energy challenge. Thermal Energy Storage (TES) has received significant attention in recent years as TES can be integrated into heating, ventilation, and air-conditioning systems where the energy would be stored during low-demand times and dispatched during high-demand times, resulting in controlling the peak load and improving energy savings. Material development is an integral part of TES. Salt hydrates are appealing due to cost-effectiveness, low- to no toxicity, and their high melting enthalpy, where energy is stored as latent heat. However, most salt hydrates are prone to incongruent melting (i.e., phase separation upon melting), which results in poor stability and large supercooling. In this study, we produced a highly stable novel energy storage material at a composition of 32 wt% sodium sulfate decahydrate, 52 wt% sodium phosphate dibasic dodecahydrate, 12 wt% milled expanded graphite, and 4 wt% borax. The material has a melting temperature of 28°C and an energy storage capacity of 167 kJ/kg with a supercooling of less than 3°C. The system showed no loss in energy storage performance after 150 cycles. The findings suggest that the novel energy storage material developed in this might be utilized in building heating and cooling applications.

Turnaoglu, Tugba↗

A universal wet-chemistry synthesis of solid-state halide electrolytes for all-solid-state lithium-metal batteries

Solid-state halide electrolytes have gained revived research interests owing to their high ionic conductivity and high-voltage stability. However, synthesizing halide electrolytes from a liquid phase is extremely challenging because of the vulnerability of metal halides to hydrolysis. In this work, ammonium-assisted wet chemistry is reported to synthesize various solid-state halide electrolytes with an exceptional ionic conductivity (>1 microsiemens per centimeter). Microstrain-induced localized microstructure change is found to be beneficial to lithium ion transport in halide electrolytes. Furthermore, the interfacial incompatibility between halide electrolytes and lithium metal is alleviated by transforming the mixed electronic/ionic conductive interface into a lithium ion–conductive interface. Such all-solid-state lithium-metal batteries (ASSLMBs) demonstrate a high initial coulombic efficiency of 98.1% based on lithium cobalt oxide and a high discharge capacity of 166.9 microampere hours per gram based on single-crystal LiNi 0.6 Mn 0.2 Co 0.2 O 2 . This work provides universal approaches in both material synthesis and interface design for developing halide-based ASSLMBs.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Spontaneous breaking of finite group symmetries at all temperatures

We study conformal field theories with finite group symmetries with spontaneous symmetry breaking (SSB) phases which persist at all temperatures. We work with two \lambda \phi^4 λ ϕ 4 theories coupled through their mass terms. The two \lambda \phi^4 λ ϕ 4 theories are chosen to preserve either the cubic symmetry group, or the tetrahedral symmetry group. A one-loop calculation in the 4-\epsilon 4 − ϵ expansion shows that there exist infinitely many fixed points that can host an all temperature SSB phase. An analysis of the renormalization group (RG) stability matrix of these fixed points, reveals that their spectrum contains at least three relevant operators. In other words, these fixed points are tetracritical points.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Development of Chromium and Sulfur Getter for Solid Oxide Fuel Cell (SOFC) System

Under the “real world” SOFC operating conditions, gaseous Cr and S species coexist in air stream. The combined Cr and S effect on the electrochemical poisoning of candidate LSM and LSCF electrodes has been investigated. Electrochemical and structural analysis revealed that the combined Cr and S interactions with the LSCF electrode remains significantly different from those of the individual Cr and S interactions. S reacts with the surface SrO accompanied by morphological changes whereas the hexavalent gaseous Cr species mainly deposit at the LSCF/GDC interface as is the case with Cr-only poisoning. For LSM electrode, the combined interactions of Cr and S remains similar to the sum of individual Cr and S effects as SO 2 reacts with Sr-rich regions of the bulk LSM, while Cr deposits at the electrochemically active sites. The use of getter, consisting of alkaline earth and transition metal oxides, has been proposed as a cost-effective approach to mitigate electrode poisoning. SrMnO 3 (SMO) is suggested as a robust getter material for the co-capture of airborne gaseous S and Cr species entering high-temperature electrochemical systems. The honeycomb getter forms, covered with SMO nanoparticles, were fabricated using dip coating. The SMO getter successfully maintained the electrochemical activity of LSM under the presence of gaseous Cr and S species, validating the efficacy of the getter. Post-test characterization revealed that the absorption of S and Cr contaminants led to the elongation of granular SMO particles, forming SrO nanorods and SrCrO 4 whiskers leaving Mn oxides underneath where inward-migrating Cr reside, indicating the high mutual affinity of Sr and Mn. The growth of reaction products during the long term exposure favors continued absorption of incoming S and Cr contaminants. The Mn 2 O 9 dimers, existing on the surface, are considered to help absorb S and Cr impurities, along with the Sr-terminated surface. The SMO getter also displays robust stability in humid environments at high temperatures without phase transformation or hydrolysis, fulfilling the requirement for operation in high-temperature electrochemical systems.

30 DIRECT ENERGY CONVERSION↗

Determining the Role of Synthesis and Reaction Conditions on the Exposed Surface and Shape of ..beta..-Mo2C Catalysts

The production of drop-in quality biofuels typically can be achieved through catalytic fast pyrolysis (CFP) of biomass, followed by hydrodeoxygenation (HDO) of the vapor-phase product to reduce the oxygen content and stabilize the bio-oil product. To favor selectivity toward desired deoxygenation products, bifunctional catalysts with both acidic and hydrogenation sites are often employed. Due to both its oxophilicity and its ability to promote hydrogenation reactions, molybdenum carbide catalysts have shown promise for promoting the HDO of CFP vapors. However, the surface structure and composition of carbide catalyst particles are not well understood, precluding the establishment of fundamental structure-function relationships needed for the rational development of molybdedum carbide for HDO, as well as other reactions. For orthorhombic ..beta..-Mo2C, the (100) facet is largely studied for computational surface-reaction analyses, possibly due to its similarities with the close-packed (111) facet of noble-metal catalysts. However, it has previously been postulated through ab initio thermodynamic studies that the (111), (110), and (011) facets are most stable, though there is no consensus. Furthermore, while a majority of previous surface stability analyses of ..beta..-Mo2C focus on bulk terminations, the highly carburizing synthesis conditions and the use of ..beta..-Mo2C in carbon-containing reaction applications could introduce non-stoichiometric coverages of surface carbon. As such, this study uses ab initio thermodynamics calculations to assess the relative surface stability of the low-index facets of ..beta..-Mo2C, including consideration of varying the coverage of surface carbon. From this information, Wulff constructions are utilized to predict the synthesis and reaction condition-dependent shape and surface carbon composition of ..beta..-Mo2C catalyst particles.

BIOMASS FUELS,INORGANIC, ORGANIC, PHYSICAL, AND AN↗

High temperature lightweight Al—Fe—Si based alloys

Described herein are approaches to stabilizing AlFeSi ternary intermetallic compounds while destabilizing competing phases. The inclusion of metals such as Mn, Ni, Co, Cu, or Zn to produce quaternary systems accomplishes this problem associated with AlFeSi ternary intermetallic compounds.

Soto Medina, Sujeily↗