Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “mill”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,279 records · Page 71

Tellurium-based nanocomposites for plastic electronic applications

Owing to the very brittle nature of the tellurium powder, nanoscopic grains with average size of 4.8 nm were produced by dry vibration milling technique using a Mixer mill apparatus. A novel material was obtained by binding the nanosized tellurium grains with poly(methyl methacrylate) (PMMA). The morphology, elemental composition, and structural properties of Te/PMMA films were investigated. The prepared material was composed of hexagonal tellurium and α-phase of tellurium oxide. The electrical properties of the films were studied in dark condition and under white light illumination varying the optical power density from 10 to 170 mW/cm{sup 2} and turning on and off the light cyclically.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Notes on natural inflation

In the so-called natural inflation, an axion-like inflaton is assumed to have a cosine-type periodic potential. This is not the case in a very simple model in which the axion-like inflaton is coupled to an SU(N) (or other) pure Yang–Mills, at least in the large N limit as pointed out by Witten. It has a multi-valued potential, which is effectively quadratic, i.e., there is only a mass term in the large N limit. Thanks to this property, chaotic inflation can be realized more naturally with the decay constant of the axion-like inflaton less than the Planck scale. We demonstrate these points explicitly by using softly broken N=1 Super-Yang-Mills which allows us to treat finite N. This analysis also suggests that moderately large gauge groups such as E{sub 8} are good enough with a Planck scale decay constant.

79 ASTRONOMY AND ASTROPHYSICS↗

Non-Abelian black holes in D=5 maximal gauged supergravity

We investigate static non-Abelian black hole solutions of anti-de Sitter (AdS) Einstein-Yang-Mills-dilaton gravity, which is obtained as a consistent truncation of five-dimensional maximal gauged supergravity. If the dilaton is (consistently) set to zero, the remaining equations of motion, with a spherically-symmetric ansatz, may be derived from a superpotential. The associated first-order equations admit an explicit solution supported by a non-Abelian SU(2) gauge potential, which has a logarithmically growing mass term. In an extremal limit the horizon geometry becomes AdS{sub 2}xS{sup 3}. If the dilaton is also excited, the equations of motion cannot easily be solved explicitly, but we obtain the asymptotic form of the more general non-Abelian black holes in this case. An alternative consistent truncation, in which the Yang-Mills fields are set to zero, also admits a description in terms of a superpotential. This allows us to construct explicit wormhole solutions (neutral spherically-symmetric domain walls). These solutions may be generalized to dimensions other than five.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Resizing the conformal window: A {beta}-function ansatz

We propose an ansatz for the nonperturbative beta-function of a generic nonsupersymmetric Yang-Mills theory with or without fermions in an arbitrary representation of the gauge group. While our construction is similar to the recently proposed Ryttov-Sannino all-order beta-function, the essential difference is that it allows for the existence of an unstable ultraviolet fixed point in addition to the predicted Banks-Zaks-like infrared stable fixed point. Our beta-function preserves all of the tested features with respect to the nonsupersymmetric Yang-Mills theories. We predict the conformal window identifying the lower end of it as a merger of the infrared and ultraviolet fixed points.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Coulomb gauge confinement in the heavy quark limit

The relationship between the nonperturbative Green's functions of Yang-Mills theory and the confinement potential is investigated. By rewriting the generating functional of quantum chromodynamics in terms of a heavy quark mass expansion in Coulomb gauge, restricting to leading order in this expansion and considering only the two-point functions of the Yang-Mills sector, the rainbow-ladder approximation to the gap and Bethe-Salpeter equations is shown to be exact in this case and an analytic, nonperturbative solution is presented. It is found that there is a direct connection between the string tension and the temporal gluon propagator. Further, it is shown that for the 4-point quark correlation functions, only confined bound states of color-singlet quark-antiquark (meson) and quark-quark (baryon) pairs exist.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Gravity as the square of gauge theory

We explore consequences of the recently discovered duality between color and kinematics, which states that kinematic numerators in a diagrammatic expansion of gauge-theory amplitudes can be arranged to satisfy Jacobi-like identities in one-to-one correspondence to the associated color factors. Using on-shell recursion relations, we give a field-theory proof showing that the duality implies that diagrammatic numerators in gravity are just the product of two corresponding gauge-theory numerators, as previously conjectured. These squaring relations express gravity amplitudes in terms of gauge-theory ingredients, and are a recasting of the Kawai, Lewellen, and Tye relations. Assuming that numerators of loop amplitudes can be arranged to satisfy the duality, our tree-level proof immediately carries over to loop level via the unitarity method. We then present a Yang-Mills Lagrangian whose diagrams through five points manifestly satisfy the duality between color and kinematics. The existence of such Lagrangians suggests that the duality also extends to loop amplitudes, as confirmed at two and three loops in a concurrent paper. By ''squaring'' the novel Yang-Mills Lagrangian we immediately obtain its gravity counterpart. We outline the general structure of these Lagrangians for higher points. We also write down various new representations of gauge-theory and gravity amplitudes that follow from the duality between color and kinematics.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Resonances and bound states of the 't Hooft-Polyakov monopole

We present a systematic approach to the linearized Yang-Mills-Higgs equations in the background of a 't Hooft-Polyakov monopole and use it to unify and extend previous studies of their spectral properties. We show that a quaternionic formulation allows for a compact and efficient treatment of the linearized equations in the Bogomol'nyi-Prasad-Sommerfield limit of vanishing Higgs self-coupling and use it to study both scattering and bound states. We focus on the sector of vanishing generalized angular momentum and analyze it numerically, putting zero-energy bound states, Coulomb bound states, and infinitely many Feshbach resonances into a coherent picture. We also consider the linearized Yang-Mills-Higgs equations with nonvanishing Higgs self-coupling and confirm the occurrence of Feshbach resonances in this situation.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Holographic phase transitions of p-wave superconductors in Gauss-Bonnet gravity with backreaction

We investigate the phase transitions of holographic p-wave superconductors in (4+1)-dimensional Einstein-Yang-Mills-Gauss-Bonnet theories, in a grand canonical ensemble. Turning on the backreaction of the Yang-Mills field, it is found that the condensations of vector order parameter become harder if the Gauss-Bonnet coefficient grows up or the backreaction becomes stronger. In particular, the vector order parameter exhibits the features of first order and second order phase transitions, while only the second order phase transition is observed in the probe limit. We discuss the roles that the Gauss-Bonnet term and the backreaction play in changing the order of phase transition.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

On Projective Hoops: Loops in Hyperspace

We (re)derive the propagators and Feynman rules for the massless scalar and vector multiplets in N=2 projective superspace (''projective hyperspace''). With these, we are able to calculate both the divergent and finite parts of 2, 3, and 4-point functions at 1-loop for N=2 super-Yang-Mills theory), explicitly in projective hyperspace itself. We find that effectively only the coupling constant needs to be renormalized, unlike in the N=1 case where an independent wavefunction renormalization is also required. This feature is similar to that of the background field gauge, even though we are using ordinary Fermi-Feynman gauge. The computation of 1-hoop beta-function is then straightforward and matches with the known result. We also show that it receives no 2-hoops contributions. All these calculations provide an alternative proof of the finiteness of N=4 super-Yang-Mills.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Dynamical tachyons on fuzzy spheres

We study the spectrum of off-diagonal fluctuations between displaced fuzzy spheres in the Berenstein-Maldacena-Nastase plane wave matrix model. The displacement is along the plane of the fuzzy spheres. We find that when two fuzzy spheres intersect at angles, classical tachyons develop and that the spectrum of these modes can be computed analytically. These tachyons can be related to the familiar Nielsen-Olesen instabilities in Yang-Mills theory on a constant magnetic background. Many features of the problem become more apparent when we compare with maximally supersymmetric Yang-Mills theory on a sphere, of which this system is a truncation. We also set up a simple oscillatory trajectory on the displacement between the fuzzy spheres and study the dynamics of the modes as they become tachyonic for part of the oscillations. We speculate on their role regarding the possible thermalization of the system.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Phases of a two-dimensional large-N gauge theory on a torus

We consider two-dimensional large N gauge theory with D adjoint scalars on a torus, which is obtained from a D+2-dimensional pure Yang-Mills theory on T{sup D+2} with D small radii. The two-dimensional model has various phases characterized by the holonomy of the gauge field around noncontractible cycles of the 2-torus. We determine the phase boundaries and derive the order of the phase transitions using a method developed in an earlier work (hep-th/0910.4526), which is nonperturbative in the 't Hooft coupling and uses a 1/D expansion. We embed our phase diagram in the more extensive phase structure of the D+2-dimensional Yang-Mills theory and match with the picture of a cascade of phase transitions found earlier in lattice calculations. We also propose a dual gravity system based on a Scherk-Schwarz compactification of a D2 brane wrapped on a 3-torus and find a phase structure which is similar to the phase diagram found in the gauge theory calculation.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Perturbative Quantum Gravity as a Double Copy of Gauge Theory

In a previous paper we observed that (classical) tree-level gauge-theory amplitudes can be rearranged to display a duality between color and kinematics. Once this is imposed, gravity amplitudes are obtained using two copies of gauge-theory diagram numerators. Here we conjecture that this duality persists to all quantum loop orders and can thus be used to obtain multiloop gravity amplitudes easily from gauge-theory ones. As a nontrivial test, we show that the three-loop four-point amplitude of N=4 super-Yang-Mills theory can be arranged into a form satisfying the duality, and by taking double copies of the diagram numerators we obtain the corresponding amplitude of N=8 supergravity. We also remark on a nonsupersymmetric two-loop test based on pure Yang-Mills theory resulting in gravity coupled to an antisymmetric tensor and dilaton.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Catalytic Activity of Li{sub 1+x}Hf{sub 2–x}In{sub x}(PO{sub 4}){sub 3}-Based NASICON-Type Materials for Ethanol Conversion Reactions

Li{sub 1+} {sub x}Hf{sub 2–x}In{sub x}(PO{sub 4}){sub 3} (x = 0, 0.05, 0.1) materials have been prepared by solid-state reactions and characterized by X-ray diffraction, low-temperature nitrogen adsorption measurements, and scanning electron microscopy. The materials consist of NASICON-type lithium hafnium double phosphates with a hexagonal structure. Milling in a planetary mill has been found to increase the specific surface area of the Li{sub 1+} {sub x}Hf{sub 2–x}In{sub x}(PO{sub 4}){sub 3} materials by almost one order of magnitude (from 1.5 to 13 m{sup 2}/g in the case of LiHf{sub 2}(PO{sub 4}){sub 3}). The materials with a larger surface area exhibit catalytic activity for ethanol dehydration reactions and are less active for ethanol dehydrogenation. Ethanol conversion predominantly yields diethyl ether at low temperatures and ethylene at higher temperatures. The diethyl ether selectivity of the catalytic processes reaches 85% at 350°C, with 60% conversion, and the ethylene selectivity reaches 96% at 510°C, with 100% conversion. Indium doping raises the high-temperature acetaldehyde selectivity from 4 to 8% and leads to the formation of C{sub 4} hydrocarbons as reaction products. C{sub 4} selectivity reaches 15 and 17% in the case of the Li{sub 1.05}Hf{sub 1.95}In{sub 0.05}(PO{sub 4}){sub 3} and Li{sub 1.1}Hf{sub 1.9}In{sub 0.1}(PO{sub 4}){sub 3} materials, respectively (420°C, 97 and 92% conversion, respectively).

36 MATERIALS SCIENCE↗

Background field formalism and construction of effective action for N = 2, d = 3 supersymmetric gauge theories

We review the background field method for three-dimensional Yang-Mills and Chern-Simons models in N = 2 superspace. Superfield proper time (heat kernel) techniques are developed and exact expressions of heat kernels for constant backgrounds are presented. The background field method and heat kernel techniques are applied for evaluating the low-energy effective actions in N = 2 supersymmetric Yang-Mills and Chern-Simons models as well as in N = 4 and N = 8 SYM theories.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Effect of V Content on Corrosion Behavior of Al-V Alloys Produced by Mechanical Alloying and Subsequent Spark Plasma Sintering

Al-V alloys produced via high-energy ball milling have been reported to show simultaneous improvement of corrosion resistance and mechanical properties compared to traditional Al alloys. In these alloys, V content plays a crucial role in increasing or decreasing the corrosion resistance. Therefore, the effect of V and microstructure on corrosion of high-energy ball milled and subsequently spark plasma sintered Al-xV alloys (x = 2, 5, 10 at%) has been studied. Cyclic potentiodynamic polarization tests and electrochemical impedance spectroscopic analysis revealed the increment of V content up to 5 at% enhanced the corrosion resistance of the alloy. However, highly heterogeneous microstructure in Al-10 at%V resulted in significant localized corrosion over the immersion time. The electrochemical impedance spectroscopy studies over 14 days of immersion revealed underlying corrosion mechanisms.

36 MATERIALS SCIENCE↗

Optimization of Preprocessing and Densification of Sorghum Stover at Full-scale Operation

Transportation costs can be a prohibitive step in bringing biomass to a preprocessing location or biofuel refinery. One alternative to transporting biomass in baled or loose format to a preprocessing location, is to utilize a mobile preprocessing system that can be relocated to various locations where biomass is stored, preprocess and densify the biomass, then ship it to the refinery as needed. The Idaho National Laboratory has a full scale 'Process Demonstration Unit' PDU which includes a stage 1 grinder, hammer mill, drier, pellet mill, and cooler with the associated conveyance system components. Testing at bench and pilot scale has been conducted to determine effects of moisture on preprocessing, crop varieties on preprocessing efficiency and product quality. The INLs PDU provides an opportunity to test the conclusions made at the bench and pilot scale on full industrial scale systems. Each component of the PDU is operated from a central operating station where data is collected to determine power consumption rates for each step in the process. The power for each electrical motor in the system is monitored from the control station to monitor for problems and determine optimal conditions for the system performance. The data can then be viewed to observe how changes in biomass input parameters (moisture and crop type for example), mechanical changes (screen size, biomass drying, pellet size, grinding speed, etc.,), or other variations effect the power consumption of the system. Sorgum in four foot round bales was tested in the system using a series of 6 different screen sizes including: 3/16 in., 1 in., 2 in., 3 in., 4 in., and 6 in. The effect on power consumption, product quality, and production rate were measured to determine optimal conditions.

09 BIOMASS FUELS↗

Status of Modified Direct Denitration Development (Milestone Letter Report). MDD Status Letter Report (AFCI CETE Milestone)

Current flow sheets for processing used nuclear fuels do not produce separated streams of all of the actinides. These aqueous processing streams must be converted into solid forms suitable for recycle (fuel/target fabrication), storage, or disposal, necessitating co-conversion. A process developed at ORNL in the 1980s to make UO 3 suitable as fuel feedstock was studied for preparation of mixed actinide oxides with similarly favorable ceramic properties. The process, Modified Direct Denitration (MDD), uses ammonium nitrate to alter the thermal decomposition behavior of metal nitrates and improve the ceramic properties of the resulting solid oxide. Since plutonium (IV) and neptunium(IV) form compounds similar to uranium with the ammonium ion [(NH 4 ) 2 Pu(NO 3 ) 6 , (NH 4 ) 2 Np(NO 3 ) 6 ], MDD-conversion of these metals was considered to be applicable. Co-conversion has advantages for making mixed oxides over individual element conversions that are followed by dry mixing of the oxide powders. Issues associated with preparing a mixture from individual oxides include use of additional equipment, dusting associated with feeding and milling, time requirements for milling, blending to obtain a uniform mixture, and inhomogenity at higher plutonium concentrations. These issues can be partially or wholly avoided by using MDD coconversion in which the mixing of the individual metals occurs in liquid solution; thus, adjusting relative metal concentrations is simpler and the resulting mixed oxide is more uniform than that produced by blending the individual oxides. Utilizing MDD also eliminates the need for mechanical treatment of the powder to obtain the desired ceramic properties, such as surface area and particle size distribution, since these characteristics are acceptable as-produced. The original MDD development work established that uranium oxide with good ceramic properties could be made. Following the discovery, a more fundamental understanding of the chemistry of the uranium-ammonium double nitrate salt was developed. Later pilot-scale studies produced kilogram quantities of UO 3 using engineering-scale (1 kg/hour), continuously-operated equipment, while establishing the reliability of the process and equipment. The current work was performed in support of the Advanced Fuel Cycle Initiative (AFCI), utilizing glove-box-contained equipment (100 g/hour) to produce UO 3 , PuO 2 , and mixed oxides of uranium, plutonium, neptunium, and americium from a nitrate solution of those actinides. Then the MDD glove-box system was utilized in the Coupled-End-To-End (CETE) project to convert the U-Pu-Np and uranium product solutions into oxide powders. As part of the CETE project, a powder characterization laboratory was established in gloveboxes with instruments required for the determination of: (1) surface area by the BET methodology; (2) tap density by using a Quantachrome AutoTap; (3) flow properties by using a Freeman technology powder rheometer; (4) material composition and crystalline structure by using a powder X-ray diffractometer; (5) particle size distribution by using a laser light-scattering analyzer; and (6) imaging of the powders with a stereomicroscope. These instruments can be used to characterize the products and to determine the effects of MDD operating parameters on product powder morphology. Ultimately, the powder characteristics necessary to produce high-density, sintered MOX pellets can be determined.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗