Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “materials Science”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,279 records · Page 71

Topological nanophotonics for photoluminescence control

Rare-earth-doped nanocrystals are emerging light sources that can produce tunable emissions in colours and lifetimes, which has been typically achieved in chemistry and material science. However, one important optical challenge – polarization of photoluminescence – remains largely out of control by chemistry methods. Control over photoluminescence polarization can be gained via coupling of emitters to resonant nanostructures such as optical antennas and metasurfaces. However, the resulting polarization is typically sensitive to position disorder of emitters, which is difficult to mitigate. Recently, new classes of disorder-immune optical systems have been explored within the framework of topological photonics. Here we explore disorder-robust topological arrays of Mie-resonant nanoparticles for polarization control of photoluminescence of nanocrystals. We demonstrate polarized emission from rare-earth-doped nanocrystals governed by photonic topological edge states supported by zigzag arrays of dielectric resonators. We verify the topological origin of polarized photoluminescence by comparing emission from nanoparticles coupled to topologically trivial and nontrivial arrays of nanoresonators. We expect that our results may open a new direction in the study of topology-enable emission properties of topological edge states in many photonic systems.

36 MATERIALS SCIENCE↗

Plasmonic Hot-Carrier-Mediated Tunable Photochemical Reactions

Hot-carrier generation from surface plasmon decay has found applications in many branches of physics, chemistry, materials science, and energy science. Recent reports demonstrated that the hot carriers generated from plasmon decay in nanoparticles can transfer to attached molecules and drive photochemistry which was thought impossible previously. Here, we have computationally explored the atomic-scale mechanism of a plasmonic hot-carrier-mediated chemical process, H 2 dissociation. Numerical simulations demonstrate that, after photoexcitation, hot carriers transfer to the antibonding state of the H 2 molecule from the nanoparticle, resulting in a repulsive-potential-energy surface and H 2 dissociation. This process occurs when the molecule is close to a single nanoparticle. However, if the molecule is located at the center of the gap in a plasmonic dimer, dissociation is suppressed due to sequential charge transfer, which efficiently reduces occupation in the antibonding state and, in turn, reduces dissociation. An asymmetric displacement of the molecule in the gap breaks the symmetry and restores dissociation when the additional charge transfer is significantly suppressed. Furthermore, these models demonstrate the possibility of structurally tunable photochemistry via plasmonic hot carriers.

36 MATERIALS SCIENCE↗

Understanding the evolution of anomalous anharmonicity in Bi 2 Te 3 - x Se x

The anharmonic effect in thermoelectrics has been a central topic for decades in both condensed matter physics and material science. However, despite the long-believed strong and complex anharmonicity in the Bi 2 Te 3-x Se x series, experimental verification of anharmonicity and its evolution with doping remains elusive. We fill this important gap with high-resolution, temperature-dependent Raman spectroscopy in high-quality single crystals of Bi 2 Te , Bi 2 Te 2 Se , and Bi 2 Se 3 over the temperature range from 4 to 293 K. Klemens's model was employed to explain the renormalization of their phonon linewidths. The phonon energies of Bi 2 Se 3 and Bi 2 Te 3 are analyzed in detail from three aspects: lattice expansion, cubic anharmonicity, and quartic anharmonicity. For the first time, we explain the evolution of anharmonicity in various phonon modes and across the series. Lastly, in particular, we find that the interplay between cubic and quartic anharmonicity is governed by their distinct dependence on the phonon density of states, providing insights into anomalous anharmonicity designing of new thermoelectrics.

36 MATERIALS SCIENCE↗

Density-functional theory of material design: fundamentals and applications-I

This article is part-I of a review of density-functional theory (DFT) that is the most widely used method for calculating electronic structure of materials. The accuracy and ease of numerical implementation of DFT methods has resulted in its extensive use for materials design and discovery and has thus ushered in the new field of computational material science. In this article, we start with an introduction to Schrödinger equation and methods of its solutions. After presenting exact results for some well-known systems, difficulties encountered in solving the equation for interacting electrons are described. How these difficulties are handled using the variational principle for the energy to obtain approximate solutions of the Schrödinger equation is discussed. The resulting Hartree and Hartree–Fock theories are presented along with results they give for atomic and solid-state systems. We then describe Thomas–Fermi theory and its extensions which were the initial attempts to formulate many-electron problem in terms of electronic density of a system. Having described these theories, we introduce modern DFT by discussing Hohenberg–Kohn theorems that form its foundations. We then go on to discuss Kohn–Sham (KS) formulation of DFT in its exact form. Next, local density approximation (LDA) is introduced and solutions of KS equation for some representative systems, obtained using the LDA, are presented. We end part-I of the review describing the contents of part-II.

36 MATERIALS SCIENCE↗

Machine learning–enabled identification of material phase transitions based on experimental data: Exploring collective dynamics in ferroelectric relaxors

Exploration of phase transitions and construction of associated phase diagrams are of fundamental importance for condensed matter physics and materials science alike, and remain the focus of extensive research for both theoretical and experimental studies. For the latter, comprehensive studies involving scattering, thermodynamics, and modeling are typically required. We present a new approach to data mining multiple realizations of collective dynamics, measured through piezoelectric relaxation studies, to identify the onset of a structural phase transition in nanometer-scale volumes, that is, the probed volume of an atomic force microscope tip. Machine learning is used to analyze the multidimensional data sets describing relaxation to voltage and thermal stimuli, producing the temperature-bias phase diagram for a relaxor crystal without the need to measure (or know) the order parameter. The suitability of the approach to determine the phase diagram is shown with simulations based on a two-dimensional Ising model. Finally, these results indicate that machine learning approaches can be used to determine phase transitions in ferroelectrics, providing a general, statistically significant, and robust approach toward determining the presence of critical regimes and phase boundaries.

36 MATERIALS SCIENCE↗

Polymorphism in a high-entropy alloy

Polymorphism, which describes the occurrence of different lattice structures in a crystalline material, is a critical phenomenon in materials science and condensed matter physics. Recently, configuration disorder was compositionally engineered into single lattices, leading to the discovery of high-entropy alloys and high-entropy oxides. For these novel entropy-stabilized forms of crystalline matter with extremely high structural stability, is polymorphism still possible? Here by employing in situ high-pressure synchrotron radiation X-ray diffraction, we reveal a polymorphic transition from face-centred-cubic (fcc) structure to hexagonal-close-packing (hcp) structure in the prototype CoCrFeMnNi high-entropy alloy. The transition is irreversible, and our in situ high-temperature synchrotron radiation X-ray diffraction experiments at different pressures of the retained hcp high-entropy alloy reveal that the fcc phase is a stable polymorph at high temperatures, while the hcp structure is more thermodynamically favourable at lower temperatures. Lastly, as pressure is increased, the critical temperature for the hcp-to-fcc transformation also rises.

36 MATERIALS SCIENCE↗

Structural Differentiation between Layered Single (Ni) and Double Metal Hydroxides (Ni–Al LDHs) Using Wavelet Transformation

Layered double hydroxides (LDHs) are anionic clays important in disciplines such as environmental chemistry, geochemistry, and materials science. Developments in signal processing of extended X-ray absorption fine structure (EXAFS) data, such as wavelet transformation (WT), have been used to identify transition metals and Al present in the hydroxide sheets of LDHs. The WT plots of LDHs should be distinct from those of isostructural single metal hydroxides. However, no direct comparison of these minerals appears in the literature using WT. This work systematically analyzes a suite of Ni-rich mineral standards, including Ni–Al LDHs, single metal Ni hydroxides, and Ni-rich silicates using WT. The results illustrate that the WT plots for α-Ni(OH)2 and Ni–Al LDHs are often indistinguishable from each other, with similar two-component plots for the different mineral types. This demonstrates that the WT of the first metal shell often cannot be used to differentiate an LDH from a single metal hydroxide. Interlayer anions adsorbed to the hydroxide sheet of α-Ni(OH)2 affect the EXAFS spectra and are not visible in the FT but are clearly resolved and discrete in the WT.

36 MATERIALS SCIENCE↗

Enhanced strength of nano-polycrystalline diamond by introducing boron carbide interlayers at the grain boundaries

Polycrystalline diamond with high mechanical properties and excellent thermal stability plays an important role in industry and materials science. However, the increased inherent brittle strength with the increase of hardness has severely limited its further widespread application. In this work, we produced well-sintered nano-polycrystalline (np) diamond by directly sintering fine diamond powders with the boron carbide (B 4 C) additive at high pressure and high temperatures. The highest hardness value of up to ~90 GPa was observed in the np-diamond (consisting of fine grains with a size of 16 nm) by adding 5 wt% B 4 C at 18 GPa and 2237 K. Moreover, our results reveal that the produced samples have shown noticeably enhanced strength and toughness (18.37 MPa m 0.5 ) with the assistance of the soft phase at the grain boundaries, higher than that of the hardest known nano-twined diamond by ~24% and a little greater than that of the toughest CVD diamond (18 MPa m 0.5 ). We report this study offers a novel functional approach in improving and controlling the hardness and stiffness of polycrystalline diamond.

36 MATERIALS SCIENCE↗

Direct observation of strong momentum-dependent electron-phonon coupling in a metal

Phonon scattering in metals is one of the most fundamental processes in materials science. However, understanding such processes has remained challenging and requires detailed information on interactions between phonons and electrons. We use an ultrafast electron diffuse scattering technique to resolve the nonequilibrium phonon dynamics in femtosecond–laser-excited tungsten in both time and momentum. We determine transient populations of phonon modes which show strong momentum dependence initiated by electron-phonon coupling. For phonons near Brillouin zone border, we observe a transient rise in their population on a timescale of approximately 1 picosecond driven by the strong electron-phonon coupling, followed by a slow decay on a timescale of approximately 8 picosecond governed by the weaker phonon-phonon relaxation process. We find that the exceptional harmonicity of tungsten is needed for isolating the two processes, resulting in long-lived nonequilibrium phonons in a pure metal. Our finding highlights that electron-phonon scattering can be the determinant factor in the phonon thermal transport of metals.

36 MATERIALS SCIENCE↗

Comparing crystal structures with symmetry and geometry

Abstract Measuring the similarity between two arbitrary crystal structures is a common challenge in crystallography and materials science. Although there are an infinite number of ways to mathematically relate two crystal structures, only a few are physically meaningful. Here we introduce both a geometry-based and a symmetry-adapted similarity metric to compare crystal structures. Using crystal symmetry and combinatorial optimization we describe an algorithm to arrive at the structural relationship that minimizes these similarity metrics across all possible maps between any pair of crystal structures. The approach makes it possible to (i) identify pairs of crystal structures that are identical, (ii) quantitatively measure the similarity between crystal structures, and (iii) find and rank structural transformation pathways between any pair of crystal structures. We discuss the advantages of using the symmetry-adapted cost metric over the geometric cost. Finally, we show that all known structural transformation pathways between common crystal structures are recovered with the mapping algorithm. The methodology presented in this study will be of value to efforts that seek to catalogue crystal structures, identify structural transformation pathways or prune large first-principles datasets used to parameterize on-lattice Hamiltonians.

36 MATERIALS SCIENCE↗

Instance Segmentation for Direct Measurements of Satellites in Metal Powders and Automated Microstructural Characterization from Image Data

In this work, we propose instance segmentation as a useful tool for image analysis in materials science. Instance segmentation is an advanced technique in computer vision which generates individual segmentation masks for every object of interest that is recognized in an image. Using an out-of-the-box implementation of Mask R-CNN, instance segmentation is applied to images of metal powder particles produced through gas atomization. Leveraging transfer learning allows for the analysis to be conducted with a very small training set of labeled images. As well as providing another method for measuring the particle size distribution, we demonstrate the first direct measurements of the satellite content in powder samples. After analyzing the results for the labeled data dataset, the trained model was used to generate measurements for a much larger set of unlabeled images. The resulting particle size measurements showed reasonable agreement with laser scattering measurements. The satellite measurements were self-consistent and showed good agreement with the expected trends for different samples. Finally, we present a small case study showing how instance segmentation can be used to measure spheroidite content in the UltraHigh Carbon Steel DataBase, demonstrating the flexibility of the technique.

36 MATERIALS SCIENCE↗

Coupled polarization and nanodomain evolution underpins large electromechanical responses in relaxors

Understanding the evolution and role of nanoscale polar structures during polarization rotation in relaxor ferroelectrics is a long-standing challenge in materials science and condensed-matter physics. These nanoscale polar structures are characterized by polar nanodomains, which are believed to play a key role in enabling the large susceptibilities of relaxors. Here, using epitaxial strain, we stabilize the intermediate step during polarization rotation in epitaxial films of a prototypical relaxor and study the co-evolution of polarization and polar nanodomains. Our multimodal approach allows for a detailed examination of correlations between polarization and polar nanodomains; illuminates the effect of local chemistry, strain and electric field on their co-evolution; and reveals the underappreciated role of strain in enabling the large electromechanical coupling in relaxors. As the strain increases, the competition between chemistry-driven disorder and strain-driven order of the polar units intensifies, which is manifested in the coexistence of inclined and elongated polar nanodomains in the intermediate step of polarization rotation. Our findings establish that structural transitions between polar nanodomain configurations underpins the polarization rotation and large electromechanical coupling of relaxors.

36 MATERIALS SCIENCE↗

A novel blanket annealing process to achieve highly transparent and conducting Al doped ZnO thin films: Its mechanism and application in perovskite solar cells

Achievement of high conductivity by doping an oxide thin film while maintaining its high visible transparency remains a challenge in the field of materials science and technology. Here, we demonstrate a simple and novel technique to control compensating defects in Al doped ZnO (AZO) thin films involving a post-growth annealing process with Zn blanket. We also provide an in-depth understanding of the mechanism of achieving high conductivity. As low as 8.8 ..omega../sq sheet resistance (resistivity 3.1 x 10 -4 Ω cm) with 90% visible transmission value and wherefrom a figure of merit (FOM) value of 6.5 x 10 -2 Ω -1 for a RF sputtered 350 nm AZO thin film can be achieved. Such very low sheet resistance has been attributed to a decrease in the number of compensating defects and lesser out diffusion of Zn in AZO. Application of the developed AZO film as conducting substrate has successfully been tested by fabricating perovskite solar cells on flexible Corning(R) Willow(R) Glass substrate. The present findings open up the possibility of enough high quality industrial-scale production of transparent conducting oxides (TCOs) bearing crucial significance from the perspective of transparent electrodes for solar cells.

14 SOLAR ENERGY↗

A contorted nanographene shelter

Nanographenes have kindled considerable interest in the fields of materials science and supramolecular chemistry as a result of their unique self-assembling and optoelectronic properties. Encapsulating the contorted nanographenes inside artificial receptors, however, remains challenging. Herein, we report the design and synthesis of a trigonal prismatic hexacationic cage, which has a large cavity and adopts a relatively flexible conformation. It serves as a receptor, not only for planar coronene, but also for contorted nanographene derivatives with diameters of approximately 15 Å and thicknesses of 7 Å. A comprehensive investigation of the host-guest interactions in the solid, solution and gaseous states by experimentation and theoretical calculations reveals collectively an induced-fit binding mechanism with high binding affinities between the cage and the nanographenes. Notably, the photostability of the nanographenes is improved significantly by the ultrafast deactivation of their excited states within the cage. Encapsulating the contorted nanographenes inside the cage provides a noncovalent strategy for regulating their photoreactivity.

36 MATERIALS SCIENCE↗

Proton Diffusion through Bilayer Pores

The transport of protons through channels in complex environments is important in biology and materials science. In this work, we use multistate empirical valence bond simulations to study proton transport within a well-defined bilayer pore in a lamellar L β phase lyotropic liquid crystal (LLC). The LLC is formed from the self-assembly of dicarboxylate gemini surfactants in water, and a bilayer-spanning pore of radius of approximately 3–5 Å results from the uneven partitioning of surfactants between the two leaflets of the lamella. Local proton diffusion within the pore is significantly faster than diffusion at the bilayer surface, which is due to the greater hydrophobicity of the surfactant/water interface within the pore. Proton diffusion proceeds by surface transport along exposed hydrophobic pockets at the surfactant/water interface and depends on the continuity of hydronium–water hydrogen bond networks. At the bilayer surface, there is a reduced fraction of the “Zundel” intermediates that are central to the Grotthuss transport mechanism, whereas the fraction of these species within the bilayer pore is similar to that in bulk water. Our results demonstrate that the chemical nature of the confining interface, in addition to confinement length scale, is an important determiner of local proton transport in nanoconfined aqueous environments.

36 MATERIALS SCIENCE↗

Continuous polyamorphic transition in high-entropy metallic glass

Polyamorphic transition (PT) is a compelling and pivotal physical phenomenon in the field of glass and materials science. Understanding this transition is of scientific and technological significance, as it offers an important pathway for effectively tuning the structure and property of glasses. In contrast to the PT observed in conventional metallic glasses (MGs), which typically exhibit a pronounced first-order nature, herein we report a continuous PT (CPT) without first-order characteristics in high-entropy MGs (HEMGs) upon heating. This CPT behavior is featured by the continuous structural evolution at the atomic level and an increasing chemical concentration gradient with temperature, but no abrupt reduction in volume and energy. The continuous transformation is associated with the absence of local favorable structures and chemical heterogeneity caused by the high configurational entropy, which limits the distance and frequency of atomic diffusion. As a result of the CPT, numerous glass states can be generated, which provides an opportunity to understand the nature, atomic packing, formability, and properties of MGs. Moreover, this discovery highlights the implication of configurational entropy in exploring polyamorphic glasses with an identical composition but highly tunable structures and properties.

36 MATERIALS SCIENCE↗

Shaping the Future of Self-Driving Autonomous Laboratories Workshop

The "Shaping the Future of Self-Driving Autonomous Laboratories" workshop, held in Denver on November 7-8, 2024, brought together leading experts from materials science and computing to address the growing need to revolutionize scientific research through AI-driven autonomous laboratories. The workshop identified critical challenges, including the integration of heterogeneous data, development of AI systems that understand fundamental physical principles, and comprehensive safety protocols. Key recommendations emerged around developing universal laboratory equipment interfaces, implementing automated metadata collection systems, and creating hybrid AI approaches that combine data-driven learning with scientific principles. The workshop emphasized maintaining human oversight while leveraging automation, transforming scientific education to prepare the next generation of researchers, and establishing a national consortium leveraging DOE facilities as anchors for broader collaboration with academia and industry. Participants stressed the urgency of addressing the growing disconnect between human decision-making timescales and modern instrumentation capabilities, highlighting the need for strategic automation while preserving essential human insight and oversight in the research process.

36 MATERIALS SCIENCE↗

Direct observation on supersonic microprojectile penetration of carbon fiber composites with ultrafast synchrotron X-ray phase contrast imaging

High-speed penetration into carbon fiber composites is of fundamental importance to materials science and impact engineering, but research along this line suffers considerably from the lack of direct experimental observations. Here we investigate such penetration dynamics of a unidirectional carbon fiber reinforced epoxy (UCFRE) composite, with a combination of in situ, ultrafast, synchrotron phase contrast imaging and finite element (FE) analysis. The experiments yield the first direct observation on projectile trajectories and fiber-scale deformation and damage in the UCFRE composites during supersonic microprojectile penetration, for different fiber orientations (0 degrees - 90 degrees from the impact direction) and projectile velocities (600 - 850 m.s -1 ), at unprecedented temporal (~ 100 ps) and spatial (5 μm) resolutions. The maximum penetration depth decreases with increasing fiber orientation angles, as a result of anisotropic damage evolution in the composite sample. Strain localizations are prone to develop along a direction perpendicular to the fiber orientation, while the damage or cavity region, along the fiber direction. FE modeling with a three-dimensional Hashin criterion yields consistent projectile trajectory and cavity morphology with the experimental results. Finally, with increasing fiber orientation angles, damage analyses show a transition in the damage mode from fiber compression to matrix compression damage, in line with the increasing maximum penetration depth.

36 MATERIALS SCIENCE↗