SEARCH · Engineering Papers

Results for “kinematic”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,279 records · Page 71

All sources NASA NTRS DOE OSTI

NASA NTRS1990

Exploration of unknown mechanical assemblies through manipulation

If robots must function in unstructured environments, they must also possess the ability to acquire information and construct appropriate models of the unknown environment. This paper addresses the automatic generation of kinematic models of unknown objects with movable parts in the environment. If the relative motion between moving parts must be observed and characterized, vision alone cannot suffice. An approach in which manipulation is used with vision for sensing is better suited to the task of determining kinematic properties. In this paper, algorithms for constructing models of unknown mechanical assemblies and characterizing the relative motion are developed. Results of a simulation are described to demonstrate the role of manipulation in such an endeavor.

Kumar, Vijay R.↗

NASA NTRS1990

FACE computer simulation

A computer simulation of the FACE (Flexible Arm Controls Experiment) was conducted to assess its design for use in the Space Shuttle. The FACE is supposed to be a 14-ft long articulate structure with 4 degrees of freedom, consisting of shoulder pitch and yaw, elbow pitch, and wrist pitch. Kinematics of the FACE was simulated to obtain data on arm operation, function, workspace and interaction. Payload capture ability was modeled. The simulation indicates the capability for detailed kinematic simulation and payload capture ability analysis, and the feasibility of real-time simulation was determined. In addition, the potential for interactive real-time training through integration of the simulation with various interface controllers was revealed. At this stage, the flexibility of the arm was not yet considered.

Sadeh, Willy Z.↗

NASA NTRS1991

Deformation mechanisms in negative Poisson's ratio materials - Structural aspects

Poisson's ratio in materials is governed by the following aspects of the microstructure: the presence of rotational degrees of freedom, non-affine deformation kinematics, or anisotropic structure. Several structural models are examined. The non-affine kinematics are seen to be essential for the production of negative Poisson's ratios for isotropic materials containing central force linkages of positive stiffness. Non-central forces combined with pre-load can also give rise to a negative Poisson's ratio in isotropic materials. A chiral microstructure with non-central force interaction or non-affine deformation can also exhibit a negative Poisson's ratio. Toughness and damage resistance in these materials may be affected by the Poisson's ratio itself, as well as by generalized continuum aspects associated with the microstructure.

Lakes, R.↗

NASA NTRS1991

Descriptions of the neutral gas outflow in Comets P/Halley and Wilson (1987 VII) from analyses of velocity-resolved H2O line profiles

The spatial distribution and expansion velocity of the Comets Wilson (1987 VII) and pre- and postperihelion P/Halley are derived on the bases of velocity-resolved H2O spectral line profiles, using a kinematic model which synthesizes line profiles for comparison with observed line shapes. The results thus obtained demonstrate that the spherically symmetric outflow at constant velocity is a poor characterization of cometary neutral-gas outflow. While the radial dependence of the H2O expansion velocity is noted to be consistent with theoretically envisioned trends, the high H2O outflow velocity observed in Comet Wilson resists reconciliation with any existing kinematic model.

Larson, Harold P.↗

NASA NTRS1991

A spatial operator algebra for manipulator modeling and control

A recently developed spatial operator algebra for manipulator modeling, control, and trajectory design is discussed. The elements of this algebra are linear operators whose domain and range spaces consist of forces, moments, velocities, and accelerations. The effect of these operators is equivalent to a spatial recursion along the span of a manipulator. Inversion of operators can be efficiently obtained via techniques of recursive filtering and smoothing. The operator algebra provides a high-level framework for describing the dynamic and kinematic behavior of a manipulator and for control and trajectory design algorithms. The interpretation of expressions within the algebraic framework leads to enhanced conceptual and physical understanding of manipulator dynamics and kinematics.

Rodriguez, G.↗

NASA NTRS1990

Correction to absolute proper motion using the IAS-Galaxy model

The IAS-Galaxy (IASG) model is a software interface between theoretical models of the Galaxy and observed kinematic distributions. It has been developed for analysis of many kinematic catalogs to study global galactic structure. In addition, the IASG model can be used to estimate corrections needed to derive absolute parallax and absolute proper motion by evaluating, on a star-by-star basis, the expected mean motion of the reference stars. A theoretical Galaxy model is defined on an inertial coordinate frame. Proper motions are measured in a reference frame defined by a fundamental catalog. The observed distribution of proper motions in star catalogs can be directly compared with the expected distributions evaluated using IASG to check the accuracy of the adopted reference frame in realizing the inertial coordinate frame in the sky.

Ratnatunga, Kavan U.↗

NASA NTRS1992

High-Precision Coupling Mechanism Operable By Robots

Coupling mechanism has features making it easily operable by hand and suitable for operation by robots: tolerates some initial misalignment, imposes precise final alignment, and protects itself against overtightening. Typically used to mount equipment module on structure. Mechanism includes kinematic mounts, which tolerate small initial misalignment and enforce precise final alignment as two assemblies brought together. Clamping force applied to kinematic mounts via two flexible plates. Bolt and nut tightened on flexible plates to impose spring clamping load. Repeatability of interface tested and found to be better than forty-millionths of inch.

Voellmer, George↗

NASA NTRS1991

An assessment of the crustal remelting hypothesis for volcanism in the Freyja Montes deformation zone

The linear mountain belts of Ishtar Terra on Venus are notable for their topographic relief and slope and for the intensity of surface deformation. The mountains surround the highland plain Lakshmi Planum, the site of two major paterae and numerous other volcanic features and deposits, and evidence is widespread for volcanism within the mountains and in terrain immediately outward of the mountain belt units. While two hypotheses for magmatism can be distinguished on the basis of the chemistry of the melts, chemical data are presently lacking for the Ishtar region. The competing hypotheses for magmatism in Western Ishtar Terra can also be tested with thermal models, given a kinematic or dynamic model for the evolution of the region. The crustal remelting hypothesis is assessed, using the kinematic scenario of Head for the evolution of Freyja Montes. In that scenario, Freyja Montes formed by a sequence of large scale underthrusts of the lithosphere of the North Polar Plains beneath Ishtar Terra, with successive blocks of underthrust crust sutured in imbricate fashion onto the thickened crust of Lakshmi Planum and the mantle portion of underthrusting lithosphere episodically detached. The numerical experiments thus show that volcanic activity associated with the formation of the Frejya Montes deformation zone can be explained by crustal melting, due either to direct contact of crustal material with the hot asthenosphere or to heat generation in a thickened crustal layer.

Namiki, Noriyuki↗

NASA NTRS1991

Studies in planetary rings

Progress made in research devoted to examining Voyager imaging data for the purpose of understanding the kinematics and dynamics of the Neptune ring arcs is reported. It was found that a radial distortion of amplitude 30 km is traveling through the arcs with a perturbation by the nearby satellite 1989N4. Two new and smaller arcs within the outer Neptunian ring were also discovered. The longitudinal spacing of all arcs is roughly that expected for corotational arc shepherding by 1989N4 provided that not all corotation sites in the arc region are filled. The semimajor axis of the arcs' orbit inferred from their observed mean motion and the latest Neptune gravitational parameters is, within uncertainties, identical to the location of the 42:43 corotation-inclination resonance of 1989N4: an observation which supports the notion of corotational arc-shepherding. This hypothesis also explains that the 15 km radial width of the arcs are due to a spread in forced orbital eccentricities. Clumps within the arcs were observed at a greater frequency than previously reported. These features may be the manifestation of big bodies within the arcs providing a source of ring dust, or they may be a kinematical effect associated with the crossing of eccentric orbits at quadrature. The inclusion of ground based observations of the arcs taken up to five years ago will lengthen the baseline over which arc dynamics may be studied and should lead to a refinement in the position of the Neptune spin and invariable plane poles.

Porco, Carolyn C.↗

NASA NTRS1990

A unified motion planning approach for redundant and non-redundant manipulators with actuator constraints

The term trajectory planning has been used to refer to the process of determining the time history of joint trajectory of each joint variable corresponding to a specified trajectory of the end effector. The trajectory planning problem was solved as a purely kinematic problem. The drawback is that there is no guarantee that the actuators can deliver the effort necessary to track the planned trajectory. To overcome this limitation, a motion planning approach which addresses the kinematics, dynamics, and feedback control of a manipulator in a unified framework was developed. Actuator constraints are taken into account explicitly and a priori in the synthesis of the feedback control law. Therefore the result of applying the motion planning approach described is not only the determination of the entire set of joint trajectories but also a complete specification of the feedback control strategy which would yield these joint trajectories without violating actuator constraints. The effectiveness of the unified motion planning approach is demonstrated on two problems which are of practical interest in manipulator robotics.

Chung, Ching-Luan↗

NASA NTRS1992

Analysis and experimental evaluation of a Stewart platform-based force/torque sensor

The kinematic analysis and experimentation of a force/torque sensor whose design is based on the mechanism of the Stewart Platform are discussed. Besides being used for measurement of forces/torques, the sensor also serves as a compliant platform which provides passive compliance during a robotic assembly task. It consists of two platforms, the upper compliant platform (UCP) and the lower compliant platform (LCP), coupled together through six spring-loaded pistons whose length variations are measured by six linear voltage differential transformers (LVDT) mounted along the pistons. Solutions to the forward and inverse kinematics of the force sensor are derived. Based on the known spring constant and the piston length changes, forces/torques applied to the LCP gripper are computed using vector algebra. Results of experiments conducted to evaluate the sensing capability of the force sensor are reported and discussed.

Nguyen, Charles C.↗

NASA NTRS1991

Generic Techniques for the Calibration of Robots with Application of the 3-D Fixtures and Statistical Technique on the PUMA 500 and ARID Robots

A relatively simple, inexpensive, and generic technique that could be used in both laboratories and some operation site environments is introduced at the Robotics Applications and Development Laboratory (RADL) at Kennedy Space Center (KSC). In addition, this report gives a detailed explanation of the set up procedure, data collection, and analysis using this new technique that was developed at the State University of New York at Farmingdale. The technique was used to evaluate the repeatability, accuracy, and overshoot of the Unimate Industrial Robot, PUMA 500. The data were statistically analyzed to provide an insight into the performance of the systems and components of the robot. Also, the same technique was used to check the forward kinematics against the inverse kinematics of RADL's PUMA robot. Recommendations were made for RADL to use this technique for laboratory calibration of the currently existing robots such as the ASEA, high speed controller, Automated Radiator Inspection Device (ARID) etc. Also, recommendations were made to develop and establish other calibration techniques that will be more suitable for site calibration environment and robot certification.

Tawfik, Hazem↗

NASA NTRS1992

Development of a precision, six-axis laboratory dynamometer

This paper describes the design, fabrication, test, and operation of a unique six axis force/torque dynamometer The specimen table used to hold components under test is supported in a full six axis kinematic mount. Support struts fabricated from high strength steel with special integral two axis flexures link the specimen table to the load cell transducers. Realtime force/torque coordinate transform, root mean squared calculation, and data averaging, and color six axis display with controllable scaling are provided by a specially programmed desktop computer. The extensive structural analysis and design optimization required to obtain a stiff, well damped, lightweight structure is described in detail. Geometric optimization of the kinematic mount and fabrication details of the struts are also described.

P. J. Champagne↗

NASA NTRS1991

Self adaptive solution strategies: Locally bound constrained Newton Raphson solution algorithms

A summary is given of strategies which enable the automatic adjustment of the constraint surfaces recently used to extend the range and numerical stability/efficiency of nonlinear finite element equation solvers. In addition to handling kinematic and material induced nonlinearity, both pre-and postbuckling behavior can be treated. The scheme employs localized bounds on various hierarchical partitions of the field variables. These are used to resize, shape, and orient the global constraint surface, thereby enabling essentially automatic load/deflection incrementation. Due to the generality of the approach taken, it can be implemented in conjunction with the constraints of an arbitrary functional type. To benchmark the method, several numerical experiments are presented. These include problems involving kinematic and material nonlinearity, as well as pre- and postbuckling characteristics. Also included is a list of papers published in the course of the work.

Padovan, Joe↗

NASA NTRS1990

Dual redundant arm system operational quality measures and their applications - Dynamic measures

Dual-arm dynamic operation quality measures are presented which quantify the efficiency and capability of generating Cartesian accelerations by two cooperative arms based on the analysis of dual-arm dynamic interactions. Dual-arm dynamic manipulability is defined as the efficiency of generating Cartesian accelerations under the dynamic and kinematic interactions between individual arms and an object under manipulation. The analysis of dual-arm dynamic interactions is based on the so-called Cartesian space agent model of an arm, which represents an individual arm as a force source acting upon a point mass with the effective Cartesian space arm dynamics and an environment or an object under manipulation. The Cartesian space agent model of an arm makes it possible to derive the dynamic and kinematic constraints involved in the transport, assembly and grasping modes of dual-arm cooperation. A task-oriented operational quality measure, (TOQd) is defined by evaluating dual-arm dynamic manipulability in terms of given task requirements. TOQd is used in dual-arm joint configuration optimization. Simulation results are shown. A complete set of forward dynamic equations for a dual-arm system is derived, and dual-arm dynamic operational quality measures for various modes of dual-arm cooperation allowing sliding contacts are established.

Lee, Sukhan↗

NASA NTRS1990

Indexing system for optical beam steering

This paper describes the design and testing of an indexing system for optical-beam steering. The cryogenic beam-steering mechanism is a 360-degree rotation device capable of discrete, high-precision alignment positions. It uses low-precision components for its rough alignment and kinematic design to meet its stringent repeatability and stability requirements (of about 5 arcsec). The principal advantages of this design include a decoupling of the low-precision, large angular motion from the high-precision alignment, and a power-off alignment position that potentially extends the life or hold time of cryogenic systems. An alternate design, which takes advantage of these attributes while reducing overall motion, is also presented. Preliminary test results show the kinematic mount capable of sub-arc second repeatability.

Sullivan, Mark T.↗

NASA NTRS1990

Design of a compliant passive magnetic bearing for use in SIRTF's Tertiary Mirror Assembly

A proposed baseline design for the Space Infrared Telescope Facility includes a Tertiary Mirror Assembly (TMA) which selectively redirects the telescope's converging science beam to each of several instruments. The TMA's mirror rotates on an axis coincident with the beam's axis, and is held steady during observation by a kinematic mount. A bearing has been designed whose compliance causes minimal interference with the precision of the kinematic mount, and which is well suited to the particular requirements of a cryogenic satellite such as SIRTF. The bearing suspends its rotor by taking advantage of the repulsion between a superconductor and a magnet. It potentially eliminates problems associated with mechanical bearings that arise in similar applications, such as lubricant loss or failure, bearing wear, and sensitivity to particulates, and does so without imposing the thermal load of a bearing heater or active magnetic bearing. The bearing shows promise of offering an alternative to ball bearings in cryogenic applications where some compliance is acceptable or advantageous.

Cannon, David M.↗

NASA NTRS1992

Study of explosive and nonexplosive cyclogenesis during FGGE

Explosive cyclogenesis during the winter of the First Global GARP Experiment (January-February 1979) is analyzed using the revised European Centre for Medium Range Weather Forecasts (ECMWF) analyses. Explosive cyclogenesis is defined as a decrease in the sea level pressure at the rate of 1 mb/h for at least 12 h. Diagnostics for 23 explosively developing cases and 16 nonexplosive cases are evaluated. Parameters compared include the dry static stability, low-level relative vorticity, vorticity advection, upper-level divergence, and kinematic vertical velocities. These parameters are compared statistically at the initial, 12-, and 24-h time periods. Parameters for which the explosive and nonexplosive cyclone ensembles were statistically separable are the kinematic vertical velocity and the upper-level divergence and vorticity advection. The strong upper-level processes for the explosive cases at the initial time indicate the importance of upper-tropospheric features in producing the stronger vertical motions and more rapid cyclogenesis.

Wash, Carlyle H.↗