Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “jets”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,279 records · Page 71

Radio jet structures at ∼100 pc and larger scales of the γ-ray-emitting narrow-line Seyfert 1 galaxy PMN J0948+0022

Abstract The narrow-line Seyfert 1 (NLS1) galaxy PMN J0948+0022 is an archetype of γ-ray-emitting NLS1s in active galactic nuclei (AGNs). In this study, we investigate its radio structures using archival data obtained using the Karl G. Jansky Very Large Array (VLA) and the Very Long Baseline Array (VLBA). The new VLA images reveal an outermost radio emission separated by 9.1 arcsec. Its resolved structure and steep spectrum suggest a terminal shock in a radio lobe energized by the jet from the PMN J0948+0022 nucleus. This large-scale radio component is found at almost the same position angle as that of the pc-scale jet, indicating a stable jet direction up to ∼1 Mpc. Its apparent one-sidedness implies a moderate advancing speed (β > 0.27). The kinematic age of <1× 107 yr of the jet activity is consistent with the expected NLS1 phase of ∼107 yr in the AGN lifetime. The VLBA image reveals the jet structure at distances ranging from r = 0.82 milliarcsec to 3.5 milliarcsec, corresponding to approximately 100 pc, where superluminal motions were found. The jet width profile (∝ r1.12) and flux-density profile (∝ r−1.44) depending on the distance r along the jet suggest that the jet kinetic energy is converted to internal energy in this region. The jet is causally connected in a nearly conical streamline, which is supported by ambient pressure at 100 pc scales in the host galaxy of PMN J0948+0022.

Doi, Akihiro↗

LOFAR discovery of rare large FR I jets in the low-luminosity radio galaxy NGC 5322

ABSTRACT The discovery of faint Fanaroff–Riley type I (FR I) radio jets in the elliptical galaxy NGC 5322 is reported here using the 144-MHz image from Data Release 2 of the Low-Frequency Array (LOFAR) Two-metre Sky Survey (LoTSS). The jets have an angular extent of ∼40 arcmin or a projected physical extent of ∼360 kpc. The faint jets remain well collimated and disappear in the intergalactic medium, without any detected hotspots or radio lobes. The relatively brighter jets, previously detected only up to the ∼21 kpc extent at higher frequencies, are within the optical extent of the galaxy. The jets become faint abruptly outside, where detection is made only in the LOFAR image. The total radio luminosity of the galaxy at 144 MHz is estimated to be (3.7 ± 0.4) × 1022 W Hz−1. The 144-MHz radio luminosity of the faint jets outside the optical extent is estimated to be (7.1 ± 2.0) × 1021 W Hz−1. The size of the jets is exceptionally large for the galaxy’s low radio luminosity, when compared with other radio galaxies. It makes NGC 5322 a rare radio galaxy, previously not detected in other radio surveys. A combined effect of stellar core depletion and low-density environment around the jets, which results in a weak entrainment of the material surrounding the jets, could be responsible for its large size despite a low radio luminosity.

Astronomy & Astrophysics↗

Multistage Monte Carlo simulation of jet modification in a static medium

In this work, the modification of hard jets in an extended static medium held at a fixed temperature is studied using three different Monte Carlo event generators: linear Boltzmann transport (LBT), modular all twist transverse-scattering elastic-drag and radiation (MATTER), and modular algorithm for relativistic treatment of heavy-ion interactions (MARTINI). Each event generator contains a different set of assumptions regarding the energy and virtuality of the partons within a jet versus the energy scale of the medium and, hence, applies to a different epoch in the space-time history of the jet evolution. Here modeling is developed where a jet may sequentially transition from one generator to the next, on a parton-by-parton level, providing a detailed simulation of the space-time evolution of medium modified jets over a much broader dynamic range than has been attempted previously in a single calculation. Comparisons are carried out for different observables sensitive to jet quenching, including the parton fragmentation function and the azimuthal distribution of jet energy around the jet axis. The effect of varying the boundary between different generators is studied and a theoretically motivated criterion for the location of this boundary is proposed. Lastly, the importance of such an approach with coupled generators to the modeling of jet quenching is discussed.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Time-Resolved Thomson Scattering on Laboratory Plasma Jets

In this study, Thomson scattering measurements were performed on plasma jets created from a 15-μm-thick radial Al foil load on a 1-MA pulsed power machine. The laser used for these measurements has a maximum energy of 10 J at 526.5 nm. Using the full energy, however, significantly heats the 5x10¹⁸ cm⁻³ jet by inverse bremsstrahlung, creating a density bubble in the jet. To measure the evolving plasma parameters of this laser-heated jet, a streak camera was used to record the scattered spectrum, resulting in the sub-ns time-resolved Thomson scattering. Analysis of the streak camera image showed that the electron temperature of the jet was about 25 eV prior to the laser pulse. The laser then heated the plasma to 80-100 eV within about 2 ns. The electron temperature then stabilized for about 0.5 ns prior to falling at the end of the laser pulse. Jets made from a radial Ti foil showed more heating by the laser than the Al jets, going from 50 to over 150 eV, and heating was detected even when only 1 J of laser energy was used. Also, the ion-acoustic peaks in the scattered spectrum from the Ti jets were significantly narrower than those from Al jets, a result of several possible differences in the plasma created from these two materials.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Measurement of the top quark mass in the $t\bar{t}\rightarrow\text{ lepton+jets }$→ and $t\bar{t}\rightarrow\text{dilepton}$ → channels using $\sqrt{s}=7$TeV ATLAS data

The top quark mass was measured in the channels $t\bar{t}$→ lepton+jets and $t\bar{t}$→ dilepton (lepton = e,μ) based on ATLAS data recorded in 2011. The data were taken at the LHC with a proton–proton centre-of-mass energy of √s = 7 TeV and correspond to an integrated luminosity of 4.6 fb –1 . The $t\bar{t}$→ lepton+jets analysis uses a three-dimensional template technique which determines the top quark mass together with a global jet energy scale factor (JSF), and a relative b-to-light-jet energy scale factor (bJSF), where the terms b-jets and light-jets refer to jets originating from b-quarks and u, d, c, s-quarks or gluons, respectively. The analysis of the $t\bar{t}$→ dilepton channel exploits a one-dimensional template method using the m ℓb observable, defined as the average invariant mass of the two lepton+b-jet pairs in each event. The top quark mass is measured to be 172.33 ± 0.75 (stat + JSF + bJSF) ± 1.02(syst) GeV, and 173.79 ± 0.54(stat) ± 1.30(syst) GeV in the $t\bar{t}$→ lepton+jets and $t\bar{t}$→ dilepton channels, respectively. Thus, the combination of the two results yields m top = 172.99 ± 0.48(stat) ± 0.78(syst) GeV, with a total uncertainty of 0.91 GeV.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Optimisation of large-radius jet reconstruction for the ATLAS detector in 13 TeV proton–proton collisions

Jet substructure has provided new opportunities for searches and measurements at the LHC, and has seen continuous development since the optimization of the large-radius jet definition used by ATLAS was performed during Run 1. A range of new inputs to jet reconstruction, pile-up mitigation techniques and jet grooming algorithms motivate an optimisation of large-radius jet reconstruction for ATLAS. In this paper, this optimisation procedure is presented, and the performance of a wide range of large-radius jet definitions is compared. The relative performance of these jet definitions is assessed using metrics such as their pileup stability, ability to identify hadronically decaying W bosons and top quarks with large transverse momenta. A new type of jet input object, called a ‘unified flow object’ is introduced which combines calorimeter- and inner-detector-based signals in order to achieve optimal performance across a wide kinematic range. Large-radius jet definitions are identified which significantly improve on the current ATLAS baseline definition, and their modelling is studied using pp collisions recorded by the ATLAS detector at √s = 13 TeV

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Configuration and performance of the ATLAS b -jet triggers in Run 2

Several improvements to the ATLAS triggers used to identify jets containing b-hadrons (b-jets) were implemented for data-taking during Run 2 of the Large Hadron Collider from 2016 to 2018. These changes include reconfiguring the b-jet trigger software to improve primary-vertex finding and allow more stable running in conditions with high pile-up, and the implementation of the functionality needed to run sophisticated taggers used by the offline reconstruction in an online environment. These improvements yielded an order of magnitude better light-flavour jet rejection for the same b-jet identification efficiency compared to the performance in Run 1 (2011–2012). The efficiency to identify b-jets in the trigger, and the conditional efficiency for b-jets that satisfy offline b-tagging requirements to pass the trigger are also measured. Correction factors are derived to calibrate the b-tagging efficiency in simulation to match that observed in data. The associated systematic uncertainties are substantially smaller than in previous measurements. In addition, b-jet triggers were operated for the first time during heavy-ion data-taking, using dedicated triggers that were developed to identify semileptonic b-hadron decays by selecting events with geometrically overlapping muons and jets.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Barotropic and Baroclinic Eddy Feedbacks in the Midlatitude Jet Variability and Responses to Climate Change–Like Thermal Forcings

Abstract Studies have suggested that the persistence in the meridional vacillation of the midlatitude jet (i.e., annular mode time scale) in comprehensive climate models is related to the model biases in climatological jet latitude, with important implications for projections of future climates and midlatitude weather events. Through the use of the recently developed finite-amplitude wave activity formalism and feedback quantifying techniques, this paper has quantified the role of barotropic and baroclinic eddy feedbacks in annular mode time scales using an idealized dry atmospheric model. The eddy–mean flow interaction that characterizes the persistent anomalous state of the midlatitude jet depends on processes associated with the lower-tropospheric source of vertically propagating Rossby waves, baroclinic mechanisms, and processes associated with upper-tropospheric wave propagation and breaking, barotropic mechanisms. A variety of climate change–like thermal forcings are used to generate a range of meridional shifts in the midlatitude eddy-driven jet. The idealized model shows a reduction in annular mode time scale associated with an increase in jet latitude, similar to comprehensive climate models. This decrease in time scale can be attributed to a similar decrease in the strength of the barotropic eddy feedback, which, in the positive phase of the annular mode, is characterized by anomalous potential vorticity (PV) mixing on the equatorward flank of the climatological jet. The decrease in subtropical PV mixing is, in turn, associated with a stronger subtropical jet as the eddy-driven jet is more distant from the subtropics. These results highlight the importance of subtropical eddy–mean flow interactions for the persistence of an eddy-driven jet.

54 ENVIRONMENTAL SCIENCES↗

Exploration of Water Jets in Supersonic Crossflow Using X-Ray Diagnostics

Here, near-field structures of pure- and aerated-liquid jets injected into Mach 2 crossflow environments were experimentally investigated at the 7-BM beamline of the Advanced Photon Source at Argonne National Laboratory using high-speed shadowgraph imaging, high-speed x-ray imaging, and pathlength-integrated x-ray fluorescence. Liquid was flush injected into a blowdown supersonic wind tunnel. Test section top and side windows were fitted with a polycarbonate plate for high x-ray transmittance. An axisymmetric aerated-liquid injector was fitted with an exchangeable nozzle adaptor to generate a liquid jet. Water and nitrogen, the gas used for aerated-liquid jets, were doped with specially selected dopants to facilitate x-ray measurements. Liquid column structures for a pure-liquid jet, typically masked by dense droplet clouds in a supersonic crossflow environment, were visualized with the present x-ray imaging setup. Surface-wave formation, movement, and transformation on the column windward surface of the pure-liquid jet, along with column deformation and breakup processes, were qualitatively characterized. We measured time-averaged line-of-sight (LOS) liquid mass distributions within the liquid jet near fields. Cross-sectional liquid column contours of pure-liquid jets at various deformation stages were reconstructed from LOS liquid mass distributions. The pure-liquid jet deformed liquid column reached a maximum width of 1.47 times the orifice diameter before exhibiting rapid mass removal. We also observed the plume-crossing phenomenon in the aerated-liquid jet.

47 OTHER INSTRUMENTATION↗

Measurement of dijet production with a veto on additional central jet activity in p p collisions at s = 7 TeV using the ATLAS detector

CERN-LHC. Measurement of dijet production with a jet veto on additional central jet activity in proton-proton collisions at a centre-of-mass energy of 7 TeV. The measurement was performed using 2010 data recorded by the ATLAS detector. The boundary jets system is defined using two different selection criteria: the two leading pT jets selection, where the two highest transverse momentum jets (of transverse momentum pT > 20 GeV and absolute rapidity |y| < 4.4) in the events are used and the forward-backward selection, where the most forward and most backward jets in the events (same selection cuts) are used. The Gap Fraction is defined as the fraction of dijet events which have no other jets with transverse momentum above a veto scale Q0 (20 GeV) in the rapidity interval between the boundary jets. Also measured is the mean multiplicity of jets above this veto scale in the rapidity interval bounded by the dijet system.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Ion Acceleration by Laser Plasma Interaction from Cryogenic Micro Jets - Oral Presentation [Slides]

Processes that occur in extreme conditions, such as in the center of stars and large planets, can be simulated in the laboratory using facilities such as SLAC National Accelerator Laboratory and the Jupiter Laser Facility (JLF) at Lawrence Livermore National Laboratory (LLNL). These facilities allow scientists to investigate the properties of matter by observing their interactions with high power lasers. Ion acceleration from laser plasma interaction is gaining greater attention today due to its widespread potential applications, including proton beam cancer therapy and fast ignition for energy production. Typically, ion acceleration is achieved by focusing a high power laser on thin foil targets through a mechanism called Target Normal Sheath Acceleration. Based on research and recent experiments, we hypothesized that a pure liquid cryogenic jet would be an ideal target for this type of interaction, capable of producing the highest proton energies possible with today’s laser technologies. Furthermore, it would provide a continuous, pure target, unlike metal foils which are consumed in the interaction and easily contaminated. In an effort to test this hypothesis and investigate new, potentially more efficient mechanisms of ion acceleration, we used the 527 nm split beam, frequency-doubled TITAN laser at JLF. Data from the cryogenic jets was limited due to the flow of current up the jet into the nozzle during the interaction, heating the jet and damaging the orifice. However, we achieved a pure proton beam with an indication of a monoenergetic feature. Furthermore, data from gold and carbon wires showed surprising and interesting results. Preliminary analysis of data from two ion emission diagnostics, Thomson parabola spectrometers (TPs) and radio chromic films (RCFs), suggests that shockwave acceleration occurred rather than target normal sheath acceleration, the standard mechanism of ion acceleration. Upon completion of the experiment at TITAN, I researched the possibility of transforming our liquid cryogenic jets into droplet streams. This type of target should solve our problems with the jet as it will prevent the flow of exocurrent into the nozzle. It is also highly effective as it is even more mass-limited than standard cryogenic jets. Furthermore, jets break up spontaneously anyway. If we can control the breakup, we can synchronize the droplet emission with the laser pulses. In order to assist the team prepare for an experiment later this year, I familiarized myself with the physics and theory of droplet formation, calculated values for the required parameters, and ordered the required materials for modification of the jet. Future experiments will test these droplet streams and continue towards the goal of ion acceleration using cryogenic targets.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

MINIFILAMENT ERUPTIONS THAT DRIVE CORONAL JETS IN A SOLAR ACTIVE REGION

We present observations of eruptive events in an active region adjacent to an on-disk coronal hole on 2012 June 30, primarily using data from the Solar Dynamics Observatory ( SDO )/Atmospheric Imaging Assembly (AIA), SDO /Helioseismic and Magnetic Imager (HMI), and STEREO - B . One eruption is of a large-scale (∼100″) filament that is typical of other eruptions, showing slow-rise onset followed by a faster-rise motion starting as flare emissions begin. It also shows an “EUV crinkle” emission pattern, resulting from magnetic reconnections between the exploding filament-carrying field and surrounding field. Many EUV jets, some of which are surges, sprays and/or X-ray jets, also occur in localized areas of the active region. We examine in detail two relatively energetic ones, accompanied by GOES M1 and C1 flares, and a weaker one without a GOES signature. All three jets resulted from small-scale (∼20″) filament eruptions consistent with a slow rise followed by a fast rise occurring with flare-like jet-bright-point brightenings. The two more-energetic jets showed crinkle patters, but the third jet did not, perhaps due to its weakness. Thus all three jets were consistent with formation via erupting minifilaments, analogous to large-scale filament eruptions and to X-ray jets in polar coronal holes. Several other energetic jets occurred in a nearby portion of the active region; while their behavior was also consistent with their source being minifilament eruptions, we could not confirm this because their onsets were hidden from our view. Magnetic flux cancelation and emergence are candidates for having triggered the minifilament eruptions.

79 ASTRONOMY AND ASTROPHYSICS↗

A TEMPORAL ANALYSIS INDICATES A MILDLY RELATIVISTIC COMPACT JET IN GRS 1915+105

Most of our knowledge of the radio morphology and kinematics of X-ray binary partially synchrotron self-absorbed compact jets (hereafter, compact jets) is based on the observations of GRS 1915+105, which has the most prominent compact jet. Yet, the compact jet bulk velocity, v, is poorly constrained in the literature, 0.07 10 s) X-ray activity associated with 15 GHz flux density >70 mJy for >7 consecutive days. The radio emission is associated with compact jet emission. Two HPS were monitored at 15 GHz during their termination with e-folding times of 3.8 and 8.6 hr. We combine this timescale with the scale of the spatial variation of the linear source of a Very Large Baseline Array image preceding the fade of one of these HPS in order to estimate the jet speed. Our assumption that the reduction in radio emissivity propagates as an approximate discontinuity down the HPS jet (leaving a weak jet in its wake) indicates 0.17<v/c<0.43. This agrees closely with the only other existing v estimates that are derived directly from radio images, jet asymmetry produced by Doppler enhancement.

79 ASTRONOMY AND ASTROPHYSICS↗

RELATIVISTIC DOPPLER BEAMING AND MISALIGNMENTS IN AGN JETS

Radio maps of active galactic nuclei often show linear features, called jets, on both parsec and kiloparsec scales. These jets supposedly possess relativistic motion and are oriented close to the line of sight of the observer, and accordingly the relativistic Doppler beaming makes them look much brighter than they really are in their respective rest frames. The flux boosting due to the relativistic beaming is a very sensitive function of the jet orientation angle, as seen by the observer. Sometimes, large bends are seen in these jets, with misalignments being 90° or more, which might imply a change in the orientation angle that should cause a large change in the relativistic beaming factor. Hence, if relativistic beaming does play an important role in these jets such large bends should usually show high contrast in the brightness of the jets before and after the bend. It needs to be kept in mind that sometimes a small intrinsic change in the jet angle might appear as a much larger misalignment due to the effects of geometrical projection, especially when seen close to the line of sight. What really matters are the initial and final orientation angles of the jet with respect to the observer’s line of sight. Taking the geometrical projection effects properly into account, we calculate the consequences of the presumed relativistic beaming and demonstrate that there ought to be large brightness ratios in jets before and after the observed misalignments.

79 ASTRONOMY AND ASTROPHYSICS↗

CORONAL JETS SIMULATED WITH THE GLOBAL ALFVÉN WAVE SOLAR MODEL

This paper describes a numerical modeling study of coronal jets to understand their effects on the global corona and their contribution to the solar wind. We implement jets into a well-established three-dimensional, two-temperature magnetohydrodynamic (MHD) solar corona model employing Alfvén-wave dissipation to produce a realistic solar-wind background. The jets are produced by positioning a compact magnetic dipole under the solar surface and rotating the boundary plasma around the dipole's magnetic axis. The moving plasma drags the magnetic field lines along with it, ultimately leading to a reconnection-driven jet similar to that described by Pariat et al. We compare line-of-sight synthetic images to multiple jet observations at EUV and X-ray bands, and find very close matches in terms of physical structure, dynamics, and emission. Key contributors to this agreement are the greatly enhanced plasma density and temperature in our jets compared to previous models. These enhancements arise from the comprehensive thermodynamic model that we use and, also, our inclusion of a dense chromosphere at the base of our jet-generating regions. We further find that the large-scale corona is affected significantly by the outwardly propagating torsional Alfvén waves generated by our polar jet, across 40° in latitude and out to 24 R {sub ⊙}. We estimate that polar jets contribute only a few percent to the steady-state solar-wind energy outflow.

79 ASTRONOMY AND ASTROPHYSICS↗

Pythia8 Quark and Gluon Jets (float8 e4m3FN)

A float8 (e4m3FN) quantized version of the quark and gluon jet dataset originally published by Komiske, Metodiev, and Thaler (Zenodo record 3164691). Only the 20-file subset without charm and bottom quark jets is included here. All simulation parameters and jet selection criteria are identical to the original: Pythia 8.226, √s = 14 TeV Quarks from WeakBosonAndParton:qg2gmZq, gluons from WeakBosonAndParton:qqbar2gmZg with the Z decaying to neutrinos FastJet 3.3.0, anti-k_t jets with R = 0.4 p_T^jet ∈ [500, 550] GeV, |y^jet| < 1.7 There are 20 files, each in compressed NumPy format (QG_jets_fp8e4m3fn_0.npz through QG_jets_fp8e4m3fn_19.npz). Each file contains two arrays: X: (100000, M, 4) — 50k quark and 50k gluon jets, randomly sorted, padded to max multiplicity M, with particle features (pt, rapidity, azimuthal angle, pdgid) y: (100000,) — jet labels, gluon = 0, quark = 1 Since NumPy has no native fp8 dtype, X is stored as float32, but the values have been quantized through TensorFlow's float8_e4m3fn type and carry only fp8 precision. The quantization procedure is as follows: a global per-channel scale factor is computed from the absolute maximum value across all 20 chunks (with FP8_MAX = 448.0, the maximum representable value of e4m3FN). Each chunk is then scaled into the fp8 dynamic range, round-tripped through tf.experimental.float8_e4m3fn, and scaled back. This global scaling ensures a consistent quantization grid across the full dataset. The y labels are unchanged. Users should be aware that e4m3FN has limited dynamic range and precision. We recommend verifying this format is appropriate for your application; for a less aggressive reduction see the float16 and float32 versions linked below. If you use this dataset, please cite the original Zenodo record and its associated paper: Komiske, Metodiev, Thaler, Energy Flow Networks: Deep Sets for Particle Jets, JHEP 01 (2019) 121, arXiv:1810.05165

DiLullo, Nicholas [Brown University] (ORCID:000000↗

Correlation of total sound power and peak sideline OASPL from jet exhausts

An empirical analysis of jet noise is made for convergent exhaust nozzles. An engineering approach to the correlation of total sound power and miximum sideline overall sound pressure level (OASPL), at 200 ft, is presented for both subsonic and supersonic jets based on available data. Data correlation for subsonic jets shows no dependency of total sound power and maximum sideline OASPL on jet density. The analysis for supersonic jets results in a correlation parameter for jet total sound power consisting of the conventional Lighthill parameter modified by considerations of jet Mach number and jet acoustic velocity. Similar parameters also correlate the maximum sideline OASPL for supersonic jets.

Vonglahn, U. H.↗

Correlation of total sound power and peak sideline OASPL from jet exhausts.

An empirical analysis of jet noise is made for convergent exhaust nozzles. This study, conducted at the Lewis Research Center, presents an engineering approach to the correlation of total sound power and maximum sideline OASPL (at 200 ft) for both subsonic and supersonic jets based on available data. Data correlation for subsonic jets shows no dependency of total sound power and maximum sideline OASPL on jet density. The analysis for supersonic jets results in a correlation parameter for jet total sound power consisting of the conventional Lighthill parameter modified by considerations of jet Mach number and jet acoustic velocity. Similar parameters also correlate the maximum sideline OASPL for supersonic jets.

Von Glahn, U. H.↗