Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “interactions and forces”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,279 records · Page 71
All sourcesNASA NTRSDOE OSTI
NASA NTRS1994

Influence of cross-flow on nonlinear Tollmien-Schlichting/vortex interaction

The transition of an incompressible three-dimensional boundary layer with strong cross-flow is considered theoretically and computationally in the context of vortex/wave interactions. Specifically the work centers on two lower-branch Tollmien-Schlichting waves which mutually interact nonlinearly to induce a longitudinal vortex flow. The vortex motion in turn gives rise to significant wave modulation via wall-shear forcing. The characteristic Reynolds number is large and, as a consequence, the waves' and the vortex motion are governed primarily by triple deck theory. The nonlinear interaction is captured by a viscous partial-differential system for the vortex coupled with a pair of amplitude equations for each wave pressure. Following analysis and computation over a wide range of parameters, three distinct responses are found to emerge in the nonlinear behavior of the flow solution downstream: an algebraic finite-distance singularity, far-downstream saturation or far-downstream wave decay leaving pure vortex flow. These depend on the input conditions, the wave angles and the size of the cross flow.

Davis, D. A. R.↗
NASA NTRS1998

Using the Casimir Force to Measure the Gravitational Constant

I show that the dynamics of two coupled torsion pendulums is drastically affected by their mutual Casimir surface interaction if the masses involved are relatively close to each other. The effect is directly related to the ratio of the masses used to the Planck mass.

Casimir Force Gravitational Constant Newtonian Con↗
DOE OSTI2020

An Assessment of the Drag Models in the Case of a Shock Interacting With a Fixed Bed of Point Particles

Abstract In this work, three-dimensional Euler–Lagrange (EL) point-particle simulations of a shock wave interacting with a fixed bed of particles are carried out. The results from the particle-resolved (PR) simulations are used to assess the performance of the point-particle drag models during short time scales. We demonstrate that in a one-way coupled regime, the point-particle simulations recover the dominant gas dynamic features of the flow and are in a good agreement with the exact Riemann solution of a shock traveling through a sudden area contraction. Although the PR simulations are inviscid, we show that a dissipative drag is necessary to predict the mean behavior of the gas. As a model for the inviscid shock-induced (SI) drag two different models are presented in lieu of the quasi-steady drag. Finally, two-way coupled simulations are performed at four different particle volume fractions {0.10, 0.15, 0.20, 0.25} and three different incident shock Mach numbers {1.22, 1.66, 3.0} and compared against the data from PR inviscid simulations. At a lower Mach number (1.22), averaged flow quantities from the two-way coupled simulations agree well with the PR simulations. As the Mach number increases, we observe that the discrepancies between the point-particle and the PR simulations grow. A sensitivity analysis of the drag models involved reveals a strong influence of the inviscid-unsteady force on the gas quantities especially in the case of a strong shock interacting with a dense bed of particles. The use of Mach correlation beyond the subcritical regime coupled with the model for volume fraction correction is identified as a probable cause for the additional drag.

Engineering↗
NASA NTRS1981

The aurora - An electrical discharge phenomenon surrounding the earth

An attempt to model the processes underlying the appearance of auroral phenomena as a chain of events beginning with power production and resulting in auroral light emissions is presented. Power is produced by the interaction of the solar wind with the earth magnetosphere, creating a dynamo effect which is a function of the solar wind speed and the magnitude and orientation of the solar wind magnetic field. The dynamo power generates the convective motion of magnetospheric plasma, and subsequent magnetic-field aligned currents communicate the dynamo power to the polar ionosphere. The currents close as Pederson currents, and the associated Lorentz force accelerates the ionosphere in the direction of the convective motion. An electric potential structure develops at a few thousand km height, forcing current-carrying electrons to flow down the field lines to the ionosphere, where interactions with atmospheric constituents create auroral displays.

Akasofu, S.-I.↗
DOE OSTI2022

Ab initio nucleon-nucleus elastic scattering with chiral effective field theory uncertainties

Effective interactions for nucleon-nucleus elastic scattering from first principles require the use of the same nucleon-nucleon interaction in the structure and reaction calculations and a consistent treatment of the relevant operators at each order. Systematic investigations of the effect of truncation uncertainties of chiral nucleon-nucleon ( N N ) forces have been carried out for scattering observables in the two- and three-nucleons system as well as for bound-state properties of light nuclei. Here we extend this type of study to proton and neutron elastic scattering for 16 O and 12 C. Using the frameworks of the spectator expansion of multiple scattering theory as well as the no-core shell model, we employ one specific chiral interaction from the LENPIC collaboration and consistently calculate the leading-order effective nucleon-nucleus interaction up to the third chiral order, from which we extract elastic scattering observables. Then we apply pointwise as well as correlated uncertainty quantification for the estimation of the chiral truncation error. We calculate and analyze proton elastic scattering observables for 16 O and 12 C as well as neutron elastic scattering observables for 12 C between 65 and 185 MeV projectile kinetic energy. We find in all cases qualitatively similar results for the chiral truncation uncertainties as in few-body systems and assess them using similar diagnostic tools. The order-by-order convergence of the scattering observables for 16 O and 12 C is very reasonable around 100 MeV, while for higher energies the chiral expansion parameter becomes too large for convergence. Comparing proton and neutron differential cross sections reveals that their description is comparable up to around 100 MeV. Here, we also find a nearly perfect correlation between the differential cross section for neutron scattering and the N N Wolfenstein amplitudes for small momentum transfers. The diagnostic tools for studying order-by-order convergence in observables in few-body systems can be employed for observables in nucleon-nucleus scattering with only minor modifications provided the momentum scale in the problems is not too large. We also find that the chiral N N interaction on which our study is based gives a very good description of differential cross sections for 16 O and 12 C as low as 65-MeV projectile energy, particularly in the forward direction. In addition, the very forward direction of the neutron differential cross section mirrors the behavior of the N N interaction amazingly well.

6 ≤ A ≤ 19↗
NASA NTRS1994

Low-frequency oscillations of forced barotropic flow

Jin and Ghil demonstrate that for topographically resonant flow, low-frequency finite-amplitude oscillations may arise from wave -- wave interactions and topographic form drag. Their model is extended to include a zonally asymmetric vorticity source, which is shown to interact with the perturbation field to produce zonally rectified wave fluxes that dramatically alter the Hopf bifurcation from stationary solutions to low-frequency oscillations. The frequency, intensity, and general character of these oscillations are shown to depend crucially upon the phasing and relative strength of the forcings.

Nathan, Terrence R.↗
NASA NTRS1987

Knowledge based jet engine diagnostics

A fielded expert system automates equipment fault isolation and recommends corrective maintenance action for Air Force jet engines. The knowledge based diagnostics tool was developed as an expert system interface to the Comprehensive Engine Management System, Increment IV (CEMS IV), the standard Air Force base level maintenance decision support system. XMAM (trademark), the Expert Maintenance Tool, automates procedures for troubleshooting equipment faults, provides a facility for interactive user training, and fits within a diagnostics information feedback loop to improve the troubleshooting and equipment maintenance processes. The application of expert diagnostics to the Air Force A-10A aircraft TF-34 engine equipped with the Turbine Engine Monitoring System (TEMS) is presented.

Jellison, Timothy G.↗
NASA NTRS1995

Comparisons of the Maxwell and CLL gas/surface interaction models using DSMC

The behavior of two different models of gas-surface interactions is studied using the Direct Simulation Monte Carlo (DSMC) method. The DSMC calculations examine differences in predictions of aerodynamic forces and heat transfer between the Maxwell and the Cercignani-Lampis-Lord (CLL) models for flat plate configurations at freestream conditions corresponding to a 140 km orbit around Venus. The size of the flat plate represents one of the solar panels on the Magellan spacecraft, and the freestream conditions correspond to those experienced during aerobraking maneuvers. Results are presented for both a single flat plate and a two-plate configuration as a function of angle of attack and gas-surface accommodation coefficients. The two-plate system is not representative of the Magellan geometry but is studied to explore possible experiments that might be used to differentiate between the two gas-surface interaction models. The Maxwell and CLL models produce qualitatively similar results for the aerodynamic forces and heat transfer on a single flat plate. However, the flow fields produced with the two models are qualitatively different for both the single-plate and two-plate calculations. These differences in the flowfield lead to predictions of the angle of attack for maximum heat transfer in a two plate configuration that are distinctly different for the two gas-surface interactions models.

Hedahl, Marc O.↗
DOE OSTI2026

Actinium–DOTA coordination in water from hybrid ML/MM: Structure, free energies, and water-exchange pathways

Quantitative simulation of trivalent ƒ-block chelates in water remains challenging because bonded and non-bonded force-field models make different approximations for coordination structure, exchange dynamics, and ion–ligand interactions in highly charged systems. Here, we develop a hybrid machine-learning/molecular-mechanics (ML/MM) framework for Ac 3+ –DOTA in explicit solvent by training an E(3)-equivariant neural network potential (MACELES) on mechanically embedded QM/MM data for Ac aquo and Ac–DOTA species and coupling it to NAMD 2.14 with particle-mesh Ewald electrostatics. Nanosecond ML/MM trajectories remain numerically stable and preserve chelate integrity, yielding a compact DOTA inner shell with an inner-sphere water coordination number of CN Ac,O w ≈ 1.7 arising from a dynamic equilibrium between one- and two-water states (37.5% and 59.9% of frames; three waters 2.5%). A 5 ns potential of mean force shows two low-lying basins at CN Ac,O w ≈ 1 and CN Ac,O w ≈ 2. DFT end-state free energies are consistent with the ML/MM profile, and DFT minimum-energy paths provide a qualitative electronic-structure reference for the observed basin connectivity. State-resolved kinetics reveal picosecond water-exchange pathways that couple hydration changes to transient DOTA arm fluctuations, and training-set comparisons show that temperature-matched Ac–DOTA data optimize energy/force accuracy while more diverse solvated data improve charge prediction. Overall, the present hybrid ML/MM model provides a practical description of Ac 3+ –DOTA hydration thermodynamics and short-time exchange behavior in explicit water at MD-like cost.

Actinium↗
DOE OSTI2022

Relation between interfacial shear and friction force in 2D materials

Understanding the interfacial properties between an atomic layer and its substrate is of key interest at both the fundamental and technological levels. From Fermi level pinning to strain engineering and superlubricity, the interaction between a single atomic layer and its substrate governs electronic, mechanical and chemical properties. Here, we measure the hardly accessible interfacial transverse shear modulus of an atomic layer on a substrate. By performing measurements on bulk graphite, and on epitaxial graphene films on SiC with different stacking orders and twisting, as well as in the presence of intercalated hydrogen, we find that the interfacial transverse shear modulus is critically controlled by the stacking order and the atomic layer–substrate interaction. Importantly, we demonstrate that this modulus is a pivotal measurable property to control and predict sliding friction in supported two-dimensional materials. The experiments demonstrate a reciprocal relationship between friction force per unit contact area and interfacial shear modulus. As a result, the same relationship emerges from simulations with simple friction models, where the atomic layer– substrate interaction controls the shear stiffness and therefore the resulting friction dissipation.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Genetic interactions between polycystin-1 and Wwtr1 in osteoblasts define a novel mechanosensing mechanism regulating bone formation in mice

Molecular mechanisms transducing physical forces in the bone microenvironment to regulate bone mass are poorly understood. Here, we used mouse genetics, mechanical loading, and pharmacological approaches to test the possibility that polycystin-1 and Wwtr1 have interdependent mechanosensing functions in osteoblasts. We created and compared the skeletal phenotypes of control Pkd1 flox/+ ;Wwtr1 flox/+ , Pkd1 Oc-cKO , Wwtr1 Oc-cKO , and Pkd1/Wwtr1 Oc-cKO mice to investigate genetic interactions. Consistent with an interaction between polycystins and Wwtr1 in bone in vivo, Pkd1/Wwtr1 Oc-cKO mice exhibited greater reductions of BMD and periosteal MAR than either Wwtr1 Oc-cKO or Pkd1 Oc-cKO mice. Micro-CT 3D image analysis indicated that the reduction in bone mass was due to greater loss in both trabecular bone volume and cortical bone thickness in Pkd1/Wwtr1 Oc-cKO mice compared to either Pkd1 Oc-cKO or Wwtr1 Oc-cKO mice. Pkd1/Wwtr1 Oc-cKO mice also displayed additive reductions in mechanosensing and osteogenic gene expression profiles in bone compared to Pkd1 Oc-cKO or Wwtr1 Oc-cKO mice. Moreover, we found that Pkd1/Wwtr1 Oc-cKO mice exhibited impaired responses to tibia mechanical loading in vivo and attenuation of load-induced mechanosensing gene expression compared to control mice. Finally, control mice treated with a small molecule mechanomimetic, MS2 that activates the polycystin complex resulted in marked increases in femoral BMD and periosteal MAR compared to vehicle control. In contrast, Pkd1/Wwtr1 Oc-cKO mice were resistant to the anabolic effects of MS2. These findings suggest that PC1 and Wwtr1 form an anabolic mechanotransduction signaling complex that mediates mechanical loading responses and serves as a potential novel therapeutic target for treating osteoporosis.

60 APPLIED LIFE SCIENCES↗
DOE OSTI2025

Autonomous sensor suite for evaluating fish-turbine interactions and environmental impacts in marine renewable energy and hydropower

Marine renewable energy (MRE) harnesses ocean-based resources such as waves, tides, currents, and thermal or salinity gradients for sustainable power generation. It has the potential to complement existing renewable resources, support remote communities, and contribute to decarbonization efforts. However, understanding the hydrodynamic forces created by MRE devices and their impacts on marine life is critical for responsible deployment. Here, to address these concerns, advanced sensor devices, including the Marine Sensor Fish (MSF), Sensor Fish Mini (SF Mini), and Flexible Sensor Fish (FSF), were developed to measure interactions between aquatic organisms and MRE systems. This paper details the design, manufacturing, calibration, and field deployment of these sensor suites, highlighting their ability to capture key physical stressors such as shear forces, pressure changes, and collision impacts. The MSF successfully evaluated turbine interactions at a tidal turbine in the Salish Sea, capturing data on turbulence, collision impact, and pressure gradients. The SF Mini validated hydrodynamic conditions in scaled hydraulic models, supporting computational fluid dynamics simulations. The FSF, with its flexible silicone body, measured species-specific impacts in turbulent environments. This research demonstrates the potential of Sensor Fish technology to advance sustainable marine energy systems by reducing biological impacts and informing environmentally sustainable designs.

Ecological impacts↗
NASA NTRS2003

Derivation of the Data Reduction Equations for the Calibration of the Six-component Thrust Stand in the CE-22 Advanced Nozzle Test Facility

This paper documents the derivation of the data reduction equations for the calibration of the six-component thrust stand located in the CE-22 Advanced Nozzle Test Facility. The purpose of the calibration is to determine the first-order interactions between the axial, lateral, and vertical load cells (second-order interactions are assumed to be negligible). In an ideal system, the measurements made by the thrust stand along the three coordinate axes should be independent. For example, when a test article applies an axial force on the thrust stand, the axial load cells should measure the full magnitude of the force, while the off-axis load cells (lateral and vertical) should read zero. Likewise, if a lateral force is applied, the lateral load cells should measure the entire force, while the axial and vertical load cells should read zero. However, in real-world systems, there may be interactions between the load cells. Through proper design of the thrust stand, these interactions can be minimized, but are hard to eliminate entirely. Therefore, the purpose of the thrust stand calibration is to account for these interactions, so that necessary corrections can be made during testing. These corrections can be expressed in the form of an interaction matrix, and this paper shows the derivation of the equations used to obtain the coefficients in this matrix.

Wong, Kin C.↗
DOE OSTI2022

Universal van der Waals Force between Heavy Polarons in Superfluids

Here, we investigate the long-range behavior of the induced Casimir interaction between two spinless heavy impurities, or polarons, in superfluid cold atomic gases. With the help of effective field theory (EFT) of a Galilean invariant superfluid, we show that the induced impurity-impurity potential at long distance universally shows a relativistic van der Waals-like attraction (~1/r 7 ) resulting from the exchange of two superfluid phonons. We also clarify finite temperature effects from the same two-phonon exchange process. The temperature $\mathrm{T}$ introduces the additional length scale c s /$\mathrm{T}$ with the speed of sound c s . Leading corrections at finite temperature scale as $\mathrm{T}$ 6 /r for distances r$\ll$c s /$\mathrm{T}$ smaller than the thermal length. For larger distances the potential shows a nonrelativistic van der Waals behavior (~$\mathrm{T}$/r 6 ) instead of the relativistic one. Our EFT formulation applies not only to weakly coupled Bose or Fermi superfluids but also to those composed of strongly correlated unitary fermions with a weakly coupled impurity. The sound velocity controls the magnitude of the van der Waals potential, which we evaluate for the fermionic superfluid in the BCS-BEC crossover.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
NASA NTRS1974

Comment on determination of the interaction potential between Ar and HCl

To test the accuracy of the Gordon-Kim theory of intermolecular forces, predicted and experimental values are compared for Ar-HCl. The method appears to accurately predict the short-range repulsive forces and also the position (but possibly not the depth) of the potential well.

Green, S.↗
NASA NTRS1994

The future of interaction on the Internet

The federated collection of heterogeneous computers we collectively term the Internet has been the force behind revolutionary change, both in terms of actual practice and imagination of what might be. The raw numbers are staggering: IP registrations are now ten times that of only five years ago; and between 1992 - 1993 the amount of information being transferred tripled. Changes in three key areas: knowledge discovery; intelligent information access; and collaboration on the Internet are discussed.

Maybury, Mark T.↗
NASA NTRS2016

Aerosol Complexity and Implications for Predictability and Short-Term Forecasting

There are clear NWP and climate impacts from including aerosol radiative and cloud interactions. Changes in dynamics and cloud fields affect aerosol lifecycle, plume height, long-range transport, overall forcing of the climate system, etc. Inclusion of aerosols in NWP systems has benefit to surface field biases (e.g., T2m, U10m). Including aerosol affects has impact on analysis increments and can have statistically significant impacts on, e.g., tropical cyclogenesis. Above points are made especially with respect to aerosol radiative interactions, but aerosol-cloud interaction is a bigger signal on the global system. Many of these impacts are realized even in models with relatively simple (bulk) aerosol schemes (approx.10 -20 tracers). Simple schemes though imply simple representation of aerosol absorption and importantly for aerosol-cloud interaction particle-size distribution. Even so, more complex schemes exhibit a lot of diversity between different models, with issues such as size selection both for emitted particles and for modes. Prospects for complex sectional schemes to tune modal (and even bulk) schemes toward better selection of size representation. I think this is a ripe topic for more research -Systematic documentation of benefits of no vs. climatological vs. interactive (direct and then direct+indirect) aerosols. Document aerosol impact on analysis increments, inclusion in NWP data assimilation operator -Further refinement of baseline assumptions in model design (e.g., absorption, particle size distribution). Did not get into model resolution and interplay of other physical processes with aerosols (e.g., moist physics, obviously important), chemistry

Predictability↗
DOE OSTI2025

Proton radiation effects in indium oxide using cascade molecular dynamics simulations

Metal oxide (MO) semiconductors, characterized by their wide band gaps and notable charge transport properties, are promising candidates for electronic applications in extreme environments, including near-Earth space. However, atomistic simulations of radiation–matter interactions in MOs remain challenging due to the limitations of existing interatomic potentials, which often fail to capture both the short-range repulsive forces essential for radiation damage modeling and the long-range electrostatic effects governing defect evolution. In this work, we develop a customized interatomic potential tailored for radiation damage simulations in indium oxide (In 2 O 3 ) as a model system, a representative MO material. Our potential integrates the Ziegler-Biersack-Littmark potential to accurately describe short-range interactions with Buckingham and Coulombic potentials to account for long-range forces. We perform molecular dynamics simulations of low-energy proton irradiation using this custom potential. We employ the primary knock-on atom (PKA) cascade method to study atomic displacements and primary defect formation. Simulations were conducted for 1 keV proton irradiation in four randomly chosen directions, and PKA-driven defect analyses at 5, 10, and 15 keV to examine the effects of direction and energy level on damage generation. Our results provide insight into the impact of irradiation direction and energy level on the cascade evolution and defect formation mechanisms.

Atomistic simulations↗