Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “gamma”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,279 records · Page 71
All sourcesNASA NTRSDOE OSTI
DOE OSTI2024

Software Verification of VARPOW

The VARPOW program is a post-processing utility program for DIF3D, specifically DIF3DVARIANT, and it was developed to provide interface files for the thermal analysis program DASSH. The basic methodology of VARPOW is to take the neutron and gamma flux (moments) calculated by DIF3D (or GAMSOR) and combine them with the heating (coefficient) cross sections to calculate the spatial power distributions using the DIF3DVARIANT spatial basis. VARPOW can use the output from GAMSOR (both steady state neutron and gamma flux calculations) or standard DIF3D/REBUS calculations (neutron flux only). The correct approach for defining the power distribution is to use GAMSOR as its purpose was to properly compute the gamma heating throughout the modeled domain. The power densities calculated by VARPOW are broken into fuel, cladding and coolant terms for which isotope-wise categorization is needed. VARPOW has built in options the user can select for the isotope categorization or VARPOW can import a file that details the isotope categorization. VARPOW can export the solution in the polynomial basis of DIF3D-VARIANT or the monomial basis of DIF3D-VARIANT. The purpose of this work is to verify the power distribution results calculated by VARPOW from both the GAMSOR and DIF3D input options and verify that the input and output options are consistent with the manual. Hand calculation and independent numerical calculation are used for this verification work.

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2024

Radiation Aging of Cable Insulation Systems to Support Extension of Cable Electrical Assessment Techniques - CRADA 562 (Final Report)

Radiation aging (primarily gamma radiation) affects a small subset of the LV cable population based on a 40-year operation. Increasing plant operating life to 60 or 80 years will result in additional cables experiencing degradation, either from radiation or from combined thermal and radiation effects. Previous research work done by EPRI and other researchers focuses on electrical diagnostics of thermal effects. However, the electrical diagnostic response of the cable system to radiation aging is minimally understood. In order to study the electrical responses from XLPE and EPR cabling and correlate these responses with radiation dose and level of thermal exposure, gamma radiation testing was performed at Pacific Northwest National Laboratory (PNNL). This report covers the radiation testing performed at PNNL, which involved irradiation of 30-foot long cables and short witness samples. The cabling was irradiated, at room temperature, using cobalt-60 gamma-rays to intervals of 10 million rads (10 Mrads), for a maximum of 70 Mrads. The results can be used to determine cable conditions (extent of damage) more accurately and localize where the degradation exists along the length of the cable (axial location). These insights can provide operators with the options to focus repair, mitigation, or replacement efforts locally.

36 MATERIALS SCIENCE↗
DOE OSTI2024

NA22 Quarterly Report

We continue to make progress toward determining the relative $\gamma$-ray intensities of 111 Ag from the secondary experimental configuration. This includes obtaining simulated detection efficiencies from CYLTRAN and Geant4 for $\gamma$-ray and β-$\gamma$ coincidence events, respectively.

42 ENGINEERING↗
DOE OSTI2024

Understanding Radiotropism in Filamentous Fungi

Melanized species of filamentous fungi isolated from high radiation environments have been reported to exhibit radiotropism, defined as the directed growth toward a source of ionizing radiation. Inconsistencies in the experimental approaches and results have impeded our understanding of the key factors involved in radiotropism. In the present study, we assessed radiotropism in four isolates of fungi: Aspergillus niger, A. calidoustus JC-1043, Paecilomyces variotii SNL-1, and P. variotii IMV-00236. Of these fungi, only P. variotii IMV-00236 had been previously reported to exhibit radiotropic behavior. Plates of each fungus were placed in equivalent proximity to a 137 Cs source, with a primary gamma emission of 662 keV, and differences in the rate and direction of mycelia growth were measured over a seven-day period. Significant differences were not observed in the rate or direction of growth of the different fungi based on exposure to gamma radiation, which suggested a lack of measurable radiotropism in these experiments. Additional studies varying parameters such gamma emission rates and energies, as well as other types of ionizing radiation (e.g., alpha and beta particles, neutrons) are necessary to gain further insights to the factors critical to the expression of radiotropic behavior in filamentous fungi.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2024

Software Verification of VARPOW

The VARPOW program is a post-processing utility program for DIF3D, specifically DIF3DVARIANT, and it was developed to provide interface files for the thermal analysis program DASSH. The basic methodology of VARPOW is to take the neutron and gamma flux (moments) calculated by DIF3D (or GAMSOR) and combine them with the heating (coefficient) cross sections to calculate the spatial power distributions using the DIF3DVARIANT spatial basis. VARPOW can use the output from GAMSOR (both steady state neutron and gamma flux calculations) or standard DIF3D/REBUS calculations (neutron flux only). The correct approach for defining the power distribution is to use GAMSOR as its purpose was to properly compute the gamma heating throughout the modeled domain. The power desnities calculated by VARPOW are broken into fuel, cladding and coolant terms for which isotope-wise categorization is needed. VARPOW has built in options the user can select for the isotope categorization or VARPOW can import a file that details the isotope categorization. VARPOW can export the solution in the polynomial basis of DIF3D-VARIANT or the monomial basis of DIF3D-VARIANT. The purpose of this work is to verify the power distribution results calculated by VARPOW from both the GAMSOR and DIF3D input options and verify that the input and output options are consistent with the manual. Hand calculation and independent numerical calculation are used for this verification work.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2026

Requirements Description of DASSH-F

This report reviews the modeling and simulation capabilities of Argonne National Laboratory’s DASSH code that is used in present reactor analysis activities. These capabilities will be used to establish the set of verification tasks necessary to verify DASSH for use on commercial projects. A similar approach was taken for the PERSENT, REBUS and DIF3D software packages. The DASSH program is a thermal analysis code designed to rapidly allow a reactor design engineer to obtain flow rates requirements that satisfy peak temperature constraints in the domain. DASSH is a follow-on development to the SE2-ANL software and SUPERENERGY-2 software that it is based upon. DASSH was designed to account for both neutron and gamma heating and is inherently connected to the GAMSOR part of the ARC suite of fast reactor analysis software. SE2-ANL is a developed piece of software from the 1980s while DASSH is a modern implementation with notable improvements in geometry handling. The most important upgrade of DASSH relative to SE2-ANL is that it can analyze multiple time points in a single run where SE2-ANL can only treat a single time point. This allows the user to understand the impact of and search the flow distribution for the entire operational period of a reactor design considering pressure drop, peak coolant and fuel temperatures, and thermal striping. DASSH has three input paths that have to be verified. The first input path builds the geometry and power distribution based upon the DIF3D model but ignores the gamma heating aspects of the problem. The second input path also builds the geometry from the DIF3D model but it takes the neutron and gamma heating distributions from GAMSOR. The third input path is to take the geometry and power distribution directly from user input (i.e. not coupled to DIF3D or GAMSOR). DASSH also has many built in correlations for material properties along with a user defined specification of the fuel, structure, and coolant properties. There are correlations for flow split, mixing, pressure drop, and heat transfer coefficients (subchannel rather than a direct methodology). In total, verification of DASSH will require an extensive testing to cover all possible user features of the software.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗
DOE OSTI2026

Reassessment of PHDS Fulcrum40h High Purity Germanium (HPGe) Detector System Performance

This report presents a comprehensive evaluation of the updated PHDS Fulcrum40h High Purity Germanium (HPGe) detector system, benchmarking its performance, usability, and software capabilities against the current National Nuclear Security Administration (NNSA) Nuclear Emergency Support Team (NEST) HPGe Detector System Requirements Document. Systematic measurements were conducted using a single Fulcrum40h detector to assess key parameters including gamma efficiency and resolution, neutron detection efficiency, gamma pulse-pileup response, and gamma-to-neutron crosstalk. The Fulcrum40h system, acquired in August 2022, has undergone recent updates by PHDS to address deficiencies identified following the initial NEST requirements release. The results provide critical insights into the detector’s operational capabilities and compliance with NNSA NEST standards.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗
DOE OSTI2026

Passive Confirmation of the Presence Of High-Explosive Material Via Neutron Transmission Spectroscopy

The goal of this project was to explore a novel approach for identifying presence and potential types of high explosives (HE) in treaty-controlled items with passive neutron sources by using passive neutron transmission spectroscopy. We predominantly look to measure relative elemental abundance of Carbon, Hydrogen, Oxygen, and Nitrogen (CHON) since most relevant materials are certain mix of these elements, as shown in Table 1. Previously, most studies exploring potential identification of CHON elemental content of targets in the vicinity of passive neutron source were focused solely on gamma spectroscopy using high resolution gamma detectors. Using neutron transmission spectroscopy with pulse-shape discrimination (PSD) capable organic scintillators is not only a novel idea in of itself, but arguably necessary for accurate identification of the CHON elemental content of an interrogated target. While high resolution gamma spectroscopy in principle can determine a presence of hydrogen and nitrogen, it is effectively blind to a quantitatively measuring areal densities of C, O. The initially proposed approach, described in detail in the project proposal, was to leverage previous Monte Carlo study on neutron transmission spectroscopy using slab shaped target interrogated with well-collimated (“pencil”) neutron beam. In this study, a simulated test CO 2 target was interrogated by a pencil neutron beam and transmitted neutron spectra were measured using PSD capable organic scintillator using MLEM based unfolding technique. To establish relative elemental content of carbon and oxygen, the unfolded neutron spectrum was fit with a parametrized combination of their respective elemental spectral templates. The individual spectral template was calculated by convoluting ENDF neutron crosssection with the known resolution of the PSD detector used in the study. This approach in the studied configuration successfully quantitatively established relative elemental composition of carbon and oxygen.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗
DOE OSTI2026

Software Verification of VARPOW

The VARPOW program is a post-processing utility program for DIF3D, specifically DIF3DVARIANT, and it was developed to provide interface files for the thermal analysis program DASSH. The basic methodology of VARPOW is to take the neutron and gamma flux (moments) calculated by DIF3D (or GAMSOR) and combine them with the heating (coefficient) cross sections to calculate the spatial power distributions using the DIF3DVARIANT spatial basis. VARPOW can use the output from GAMSOR (both steady state neutron and gamma flux calculations) or standard DIF3D/REBUS calculations (neutron flux only). The correct approach for defining the power distribution is to use GAMSOR as its purpose was to properly compute the gamma heating throughout the modeled domain. The power desnities calculated by VARPOW are broken into fuel, cladding and coolant terms for which isotope-wise categorization is needed. VARPOW has built in options the user can select for the isotope categorization or VARPOW can import a file that details the isotope categorization. VARPOW can export the solution in the polynomial basis of DIF3D-VARIANT or the monomial basis of DIF3D-VARIANT. Recently the clad neutron damage calculation capability was introduced into VARPOW, and it now allows a pathway to get distributions of clad DPA. The purpose of this work is to verify the power distribution, fast neutron flux and clad DPA results calculated by VARPOW from both the GAMSOR and DIF3D input options and verify that the input and output options are consistent with the manual. Hand calculation and independent numerical calculation are used for this verification work.

Zhong, Zhaopeng [Argonne National Laboratory (ANL)↗
DOE OSTI2019

Setting Upper Limits on the Local Burst Rate Density of Primordial Black Holes Using HAWC

Primordial Black Holes (PBHs) are black holes that may have been created by density fluctuations in the early Universe and could be as massive as supermassive black holes or as small as the Planck scale. It is believed that a black hole has a temperature inversely proportional to its mass and will thermally emit all species of fundamental particles via Hawking Radiation. PBHs with initial masses of ~5e14 g (approximately one gigaton) should be expiring today with bursts of high-energy gamma radiation in the GeV – TeV energy range. The High Altitude Water Cherenkov (HAWC) Observatory is sensitive to particles with energies of 300 GeV – 100 TeV, which corresponds to the high end of the PBH burst spectrum. With its large instantaneous field of view of ~2 sr and a duty cycle above 95%, the HAWC Observatory is well suited to perform an all-sky search for PBH bursts. We conducted a search on 959 days of gamma-ray data from HAWC by optimizing a previous gamma-ray burst transient search to the PBH burst energy spectrum, and placed the strongest upper limits on the local PBH burst rate density at the 99% confidence level.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2021

A search for spectral hardening in HAWC sources above 56 TeV

The High Altitude Water Cherenkov (HAWC) Observatory is a wide-field-of-view gamma-ray observatory that is optimized to detect gamma rays between 300 GeV and several hundred TeV. The HAWC Collaboration recently released their third source catalog (3HWC), which contains 65 sources. One of these sources, the ultra-high-energy gamma-ray source 3HWC J1908+063, may exhibit a hardening of the spectral index at the highest energies (above 56 TeV). At least two populations of particles are needed to satisfactorily explain the highest energy emission. This second component could be leptonic or hadronic in origin. If it is hadronic in origin, it would imply the presence of protons with energies up to ~1 PeV near the source. We have searched other 3HWC sources for the presence of this spectral hardening feature. If observed, this would imply that the sources could make good PeVatron candidates.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2025

Impact of Irradiation on Corrosion Performance of Hybrid Organic/Inorganic Coatings on Austenitic Stainless Steel

The effects of gamma radiation on the performance of two corrosion-resistant coatings applied to stainless-steel 304L (SS304L) surfaces are presented. Specifically, the ability of the coatings to mitigate corrosion of SS304L surfaces as a function of the dose received (0–1300 Mrad) and dose rate (176 compared to 1054 rad/s) is evaluated using electrochemical methods, spectroscopy, and microscopy. Coating A, an organic/inorganic hybrid coating consisting of a two-part silica ceramic component and a polymer linker was evaluated in comparison to Coating B, which utilized Coating A as a topcoat for a commercial, off-the-shelf, Zn-rich primer. Post irradiation, Coating A demonstrated some corrosion protection following exposure to low levels of gamma radiation, but coating degradation occurred with an increased exposure dose and resulted in isolated regions of corrosion initiation. For Coating B, greater corrosion resistance was observed compared to Coating A due to the sacrificial nature of the Zn at elevated doses of gamma radiation. No effect of the dose rate (for the single dose examined) was observed for either coating. It is proposed for Coating B that as the polymer coating thermally degrades above 250 °C (bond scission of the polymer occurs), the remaining Zinc layer adhered to the SS304L post-irradiation enables enhanced corrosion resistance as compared to Coating A, which displays solely polymer degradation. The results presented herein establish an understanding of coating behavior with radiation exposure, specifically the relationship between corrosion coating performance and radiation dose, and can inform ageing and lifetime management for various applications.

degradation↗
DOE OSTI2019

Finding the Remnants of the Milky Way's Last Neutron Star Mergers

The discovery of a binary neutron star merger (NSM) through both its gravitational wave and electromagnetic emission has revealed these events to be key sites of $r$-process nucleosynthesis. Here, we evaluate the prospects of finding the remnants of Galactic NSMs by detecting the gamma-ray decay lines from their radioactive $r$-process ejecta. We find that 126 Sn, which has several lines in the energy range 415-695 keV and resides close to the second $r$-process peak, is the most promising isotope, because of its half-life $t_{1/2}$ = 2:30(14) 10 5 yr being comparable to the ages of recent NSMs. Using a Monte Carlo procedure, we predict that multiple remnants are detectable as individual sources by next-generation $\gamma$-ray telescopes which achieve sub-MeV line sensitivities of ~18 -8 -10 -6 $\gamma$ cm -2 s -1 . However, given the unknown locations of the remnants, the most promising search strategy is a systematic survey of the Galactic plane and bulge extending to high Galactic latitudes. Individual known supernova remnants which may be mis-classi ed NSM remnants could also be targeted, especially those located outside the Galactic plane. Detection of a moderate sample of Galactic NSM remnants would provide important clues to unresolved issues such as the production of actinides in NSMs, properties of merging NS binaries, and even help distinguish them from rare supernovae as current Galactic $r-$process sources. We also investigate the diffuse flux from longer-lived nuclei (e.g. 182 Hf) that could in principle trace the Galactic spatial distribution of NSMs over longer timescales, but find that the detection of the diffuse flux appears challenging even with next-generation telescopes.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2020

Turbulent Model of Crab Nebula Radiation

We construct a turbulent model of the Crab Nebula's nonthermal emission. The present model resolves a number of long-standing problems of the Kennel–Coroniti model: (i) the sigma problem, (ii) the hard spectrum of radio electrons, (iii) the high peak energy of gamma-ray flares, (iv) and the spatial evolution of the infrared (IR) emission. The Nebula contains two populations of injected particles: Component-I, accelerated at the wind termination shock via the Fermi-I mechanism; and Component-II, accelerated in reconnecting turbulence in highly magnetized (σ >> 1) plasma in the central part of the Crab Nebula. The reconnecting turbulence in Component-II extends from radio to gamma-rays: it accelerates radio electrons with a hard spectrum, destroys the large-scale magnetic flux (and thus resolves the sigma problem), and occasionally produces gamma-ray flares (from the largest-scale reconnection events). The model reproduces the broadband spectrum of the Crab Nebula, from low-frequency synchrotron emission in radio to inverse-Compton emission at TeV energies, as well as the spatially resolved evolution of the spectral indices in the IR and optical bands.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2021

The Changing-look Blazar B2 1420+32

Abstract Blazars are active galactic nuclei with their relativistic jets pointing toward the observer, comprising two major subclasses, flat-spectrum radio quasars (FSRQs) and BL Lac objects. We present multiwavelength photometric and spectroscopic monitoring observations of the blazar B2 1420+32, focusing on its outbursts in 2018–2020. Multiepoch spectra show that the blazar exhibited large-scale spectral variability in both its continuum and line emission, accompanied by dramatic gamma-ray and optical variability by factors of up to 40 and 15, respectively, on week to month timescales. Over the last decade, the gamma-ray and optical fluxes increased by factors of 1500 and 100, respectively. B2 1420+32 was an FSRQ with broad emission lines in 1995. Following a series of flares starting in 2018, it transitioned between BL Lac and FSRQ states multiple times, with the emergence of a strong Fe pseudocontinuum. Two spectra also contain components that can be modeled as single-temperature blackbodies of 12,000 and 5200 K. Such a collection of “changing-look” features has never been observed previously in a blazar. We measure gamma-ray–optical and interband optical lags implying emission-region separations of less than 800 and 130 gravitational radii, respectively. Since most emission-line flux variations, except the Fe continuum, are within a factor of 2–3, the transitions between FSRQ and BL Lac classifications are mainly caused by the continuum variability. The large Fe continuum flux increase suggests the occurrence of dust sublimation releasing more Fe ions in the central engine and an energy transfer from the relativistic jet to subrelativistic emission components.

Astronomy & Astrophysics↗
DOE OSTI2022

HAWC Study of the Ultra-high-energy Spectrum of MGRO J1908+06

We report TeV gamma-ray observations of the ultra-high-energy source MGRO J1908+06 using data from the High Altitude Water Cherenkov Observatory. This source is one of the highest-energy known gamma-ray sources, with emission extending past 200 TeV. Modeling suggests that the bulk of the TeV gamma-ray emission is leptonic in nature, driven by the energetic radio-faint pulsar PSR J1907+0602. Depending on what assumptions are included in the model, a hadronic component may also be allowed. Using the results of the modeling, we discuss implications for detection prospects by multi-messenger campaigns.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2022

The Coupling of an EUV Coronal Wave and Ion Acceleration in a Fermi-LAT Behind-the-Limb Solar Flare

We present the Fermi-LAT observations of the behind-the-limb (BTL) flare of 2021 July 17 and the joint detection of this flare by STIX on board the Solar Orbiter. The separation between Earth and the Solar Orbiter was $99^{\circ}_{\centerdot}2$ at 05:00 UT, allowing STIX to have a front view of the flare. The location of the flare was S20E140 in Stonyhurst heliographic coordinates, making this the most distant behind-the-limb flare ever detected in >100 MeV gamma-rays. The LAT detection lasted for ~16 minutes, the peak flux was 3.6 ± 0.8 (10 –5 ) ph cm –2 s –1 with a significance >15σ. A coronal wave was observed from both STEREO-A and SDO in extreme ultraviolet (EUV), with an onset on the visible disk in coincidence with the LAT onset. A complex type II radio burst was observed by GLOSS also in coincidence with the onset of the LAT emission, indicating the presence of a shock wave. We discuss the relation between the time derivative of the EUV wave intensity profile at 193 Å as observed by STEREO-A and the LAT flux to show that the appearance of the coronal wave at the visible disk and the acceleration of protons as traced by the observed >100 MeV gamma-ray emission are coupled. We also report how this coupling is present in the data from three other BTL flares detected by Fermi-LAT, suggesting that the protons driving the gamma-ray emission of BTL solar flares and the coronal wave share a common origin.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2026

Fermi-LAT View on Three Ultra-high-energy 1LHAASO Sources in the 52° < l < 55° Region

Using more than 17 yr of Fermi-LAT data, we performed a detailed investigation of the complex 52° < l < 55° region, which encompasses the three ultra-high-energy sources 1LHAASO J1928+1746u, 1LHAASO J1928+1813u, and 1LHAASO J1929+1846u. This region hosts multiple supernova remnants (SNRs), pulsars, GeV and TeV sources. Our analysis resolves the GeV emission into three pointlike sources (J1925+1729P, J1930+1851P, and J1932+1916P) and two extended sources (J1929+1732E and J1930+1826E), and improves significantly on the description based on the 4FGL-DR4 catalog. Source J1932+1916P is identified as the known gamma-ray pulsar PSR J1932+1916, while J1925+1729P may be a new gamma-ray pulsar candidate distinct from the known gamma-ray pulsar PSR J1925+1720. This warrants future investigation and a search for pulsations. Source J1930+1851P coincides with the TeV source PWN/SNR G54.1+0.3, and its GeV−TeV spectrum is consistent with both leptonic and hadronic interpretations, although a leptonic origin in relation to the known pulsar wind nebula (PWN) is more likely. The GeV−TeV spectrum of J1929+1732E is consistent with a hybrid lepto-hadronic scenario in which the TeV emission traces the PWN powered by the pulsar PSR J1928+1746, while the GeV emission may result from interactions between particles escaped from the parent SNR and illuminating the gas environment. Similarly, J1930+1826E is likely connected to PWN/SNR G54.1+0.3 under a hadronic scenario involving escaped particles in their early propagation stage. Owing to spectral and/or morphological mismatches, the connection of these five GeV sources to the three LHAASO sources is not clear. This warrants deeper observations with HAWC and LHAASO, and a dedicated study of the modeling of the Galactic diffuse emission. Future CTAO observations with higher angular resolution are expected to deliver crucial information for the study of this region.

Liu, Linjie [Chinese Academy of Sciences (CAS), Ku↗