SEARCH · Engineering Papers

Results for “favorability”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,279 records · Page 71

All sources NASA NTRS DOE OSTI

DOE OSTI2025

Nickel hydroxide–nickel carbonate competitive growth on carbonate surfaces

The thermodynamic and kinetic factors controlling the competitive heterogeneous nucleation and growth of ubiquitous metal carbonate and hydroxide phases are poorly understood. In this work, calcite (CaCO 3 ) and magnesite (MgCO 3 ) powders were reacted with NiCl 2 (0–600 μM) for 7 days at 22 °C and 5 °C. The reacted powders were analyzed with X-ray photoelectron spectroscopy (XPS), scanning electron microscopy, and energy-dispersive X-ray spectroscopy to characterize the Ni surface precipitates formed. Evidence from these techniques pointed to the formation of mixed Ni carbonate-Ni hydroxide amorphous surface precipitates. On calcite, XPS detected primarily Ni(OH) 2 despite the initial solutions being more supersaturated with respect to gaspéite (NiCO 3 ) than to theophrastite (Ni(OH) 2 ) by a factor of 17–18. In contrast, NiCO 3 was the dominant component detected by XPS on magnesite in the same conditions. Decreasing the temperature had the effect of increasing the proportion of NiCO 3 to the detriment of Ni(OH) 2 . The experimental observations were consistent with low lattice/cation size mismatch favoring NiCO 3 nucleation and temperature most influencing Ni(OH) 2 nucleation. Comparison to previous work on Co-reacted powders indicated the differences in lattice/cation size mismatch and/or water exchange rate impacted the composition of the surface precipitates more than the relative thermodynamic stabilities of the competing minerals. This work explored the heterogeneous growth regime of Ni carbonate and hydroxide phases on carbonate surfaces and shed light on the factors that control the competition between surface precipitates when mineral surfaces are in contact with aqueous solutions supersaturated with respect to multiple mineral phases. In conclusion, these results contribute to geochemists’ efforts toward interpreting data from geochemical systems with elevated Ni concentrations, improving Ni environmental remediation and recovery strategies, and predicting the fate and transport of Ni in geochemical systems.

Heterogeneous nucleation↗

DOE OSTI2025

Molecular insights into Yb(III) speciation in sulfate-bearing hydrothermal fluids from X-ray absorption spectra informed by ab initio molecular dynamics

Rare earth elements (REEs) are critical for advanced technologies, yet in hydrothermal aqueous solutions the molecular level details of their interaction with ligands that control their geochemical transport and deposition remain poorly understood. Here, this study elucidates the coordination behavior of Yb 3+ in sulfate-rich hydrothermal fluids using in situ extended X-ray absorption fine structure (EXAFS) spectroscopy and ab initio molecular dynamics (AIMD) simulations. By integrating multi-angle EXAFS with AIMD-derived constraints, we precisely resolve Yb 3+ coordination structures and ligand interactions under hydrothermal conditions. At room temperature, Yb 3+ is coordinated by five water molecules and two sulfate ligands (coordination number, CN = 8), forming a distorted square antiprism geometry. Increasing temperature induces progressive dehydration, reducing the hydration shell and favoring stronger sulfate complexation. At 200°C, sulfate ligands reorganize around Yb 3+ , shifting its geometry to a capped octahedron (CN = 7). At 300 °C, sulfate binding dominates, leading to structural reorganization that parallels the onset of sulfate mineral precipitation, consistent with the retrograde solubility of REE sulfates. These findings provide direct molecular-scale evidence that sulfate acts as both a transport and deposition ligand, critically influencing REE mobility in geochemical environments. Our results can also help to refine thermodynamic models of REE speciation in high-temperature hydrothermal fluids and improve our understanding of REE ore formation processes in nature.

AIMD↗

DOE OSTI2024

Experimental and numerical investigation of fracture conductivity between non-smooth rock surfaces with and without proppant

The enhancement of fracture conductivity is vital for the efficient recovery of subsurface resources, such as geothermal energy and petroleum hydrocarbons. Proppants, granular materials injected into hydraulic fractures to maintain their conductivity, have been studied primarily in the context of smooth fractures (i.e., fractures between smooth rock surfaces). However, non-smooth fractures (i.e., fractures between rough rock surfaces) are common in geoenergy reservoirs and thus require further investigations. In this study, we conducted laboratory measurements of fracture conductivity on shale slabs with non-smooth surfaces and carried out numerical simulation using the lattice Boltzmann (LB) method, which aimed to investigate the conductivity of non-smooth fractures with and without proppants placement. When ceramic proppant with an areal concentration of 2 lb/ft 2 was placed in the fracture, the conductivity was enhanced by roughly 3-8 times compared to fractures without proppant. In fractures with proppant, gas-measured conductivity was higher than that measured with water due to proppant embedment caused by water. The experiments demonstrate the advantages of using proppant in fractures, even if the rock surface roughness can provide certain fracture conductivity via the self-propping mechanism. For fractures without proppants, high rock surface roughness is not necessarily favorable for enhancing fracture conductivity because the self-propping mechanism requires shear slip along the fracture surface. If there is no shear slip, high rock surface roughness can cause a detrimental effect on the fracture conductivity due to the interlocking effect. Utilizing advanced experimental equipment and LB modeling, this research explores the interplays between proppant placement, fracture geometry, and stress conditions to develop a comprehensive understanding of the productivity in non-smooth fractures. Further, the outcomes of this investigation indicate the importance of creating fractures with surface roughness during hydraulic fracturing and will contribute to the development of more efficient stimulation techniques for subsurface energy extraction.

15 GEOTHERMAL ENERGY↗

DOE OSTI2025

On the viability of stimulated hydrogen generation from iron-rich formations

Hydrogen-based technologies present a promising solution for the global energy transition. In addition to electrolytic production, subsurface geological formations provide a potential natural source of hydrogen. Iron-rich ultramafic rocks, in particular, are favorable for hydrogen generation through natural processes such as serpentinization. Naturally occurring reactions and migration can be enhanced through various types of stimulation, including thermal, hydraulic, and chemical treatment. Through numerical simulations, we analyzed the complex interplay of factors influencing the production and migration within the subsurface, emphasizing the importance of different stimulation techniques, catalysts, and conditions. Our findings indicate that key parameters, such as damage zone permeability and width, significantly impact producible hydrogen mass. Our results indicate that a combination of large damage zone widths, high permeability, and a stimulated reaction rate of 1 × 10 -9 can yield economically viable production rates of up to 1 kg s -1 at the wellhead. Moreover, the availability of ferrous iron, rather than the serpentinization rate itself, has been identified as the primary limiting factor in achieving economically sustainable hydrogen production. In conclusion, while an unstimulated rock volume of 0.165 km 3 yields only 45t of hydrogen in two years, various stimulation techniques can increase production to 18500t.

08 - HYDROGEN↗

DOE OSTI2023

Exploratory analysis of machine learning techniques in the Nevada geothermal play fairway analysis

Play fairway analysis (PFA) is commonly used to generate geothermal potential maps and guide exploration studies, with a particular focus on locating and characterizing blind geothermal systems. This study evaluates the application of machine learning techniques to PFA in the Great Basin region of Nevada. Following the evaluation of various techniques, we identified two approaches to PFA that produced promising results, 1) supervised Bayesian probabilistic neural networks to generate geothermal potential maps with confidence intervals, and 2) unsupervised principal component analysis paired with k-means clustering to generate both cluster maps to help identify spatial patterns, as well as new combined feature inputs. We applied these techniques to perform a comparative analysis between two principal sets of geological and geophysical features related to permeability and heat and a set of positive (known geothermal resources) and negative training sites (known drill sites with unsuitable geothermal conditions). We found that these methods constrain previously unrecognized feature controls on geothermal favorability, many of which are spatially organized within the extent of cluster groups and the major structural-hydrologic domains of the study area. Furthermore, we utilized exploratory unsupervised modeling to highlight spatial relationships between input data and predictive output results of our supervised modeling. As a result, we demonstrate how our models compare to the previous Nevada PFA and how the rapid insights these machine learning techniques offer may support future assessments of both known and undiscovered blind geothermal systems in the Great Basin region of Nevada and beyond.

15 GEOTHERMAL ENERGY↗

DOE OSTI2024

Geothermal play fairway analysis, part 1: Example from the Snake River Plain, Idaho

The Snake River Plain (SRP) volcanic province overlies the track of the Yellowstone hotspot, a thermal anomaly that extends deep into the mantle. Most of the area is underlain by a basaltic volcanic province that overlies a mid-crustal intrusive complex, which in turn provides the long-term heat flux needed to sustain geothermal systems. Previous studies have identified several known geothermal resource areas within the SRP. For the geothermal study presented herein, our goals were to: (1) adapt the methodology of Play Fairway Analysis (PFA) for geothermal exploration to create a formal basis for its application to geothermal systems, (2) assemble relevant data for the SRP from publicly available and private sources, and (3) build a geothermal PFA model for the SRP and identify the most promising plays, using GIS-based software tools that are standard in the petroleum industry. The study focused on identifying three critical resource parameters for exploitable hydrothermal systems in the SRP: heat source, reservoir and recharge permeability, and cap or seal. Data included in the compilation for heat source were heat flow, distribution and ages of volcanic vents, groundwater temperatures, thermal springs and wells, helium isotope anomalies, and reservoir temperatures estimated using geothermometry. Reservoir and recharge permeability was inferred from the analysis of stress orientations and magnitudes, post-Miocene faults, and subsurface structural lineaments based on magnetics and gravity data. Data for cap or seal included the distribution of impermeable lake sediments and clay-seal associated with hydrothermal alteration below the regional aquifer. These data were used to compile Common Risk Segment maps for heat, permeability, and seal, which were combined to create a Composite Common Risk Segment map for all southern Idaho that reflects the risk associated with geothermal resource exploration and identifies favorable resource tracks. Our regional assessment indicated that undiscovered geothermal resources may be located in several areas of the SRP. Two of these areas, the western SRP and Camas Prairie, were selected for more detailed assessment, during which heat, permeability, and seal were evaluated using newly collected field data and smaller grid parameters to refine the location of potential resources. These higher resolution assessments illustrate the flexibility of our approach over a range of scales.

54 ENVIRONMENTAL SCIENCES↗

DOE OSTI2025

Experimental investigation of flow distribution in enhanced geothermal systems with deep eutectic solvent

Geothermal energy has been recognized as a valuable alternative to fossil fuels and nuclear power, as it is renewable and reliable. Enhanced Geothermal Systems (EGSs) have the potential to expand geothermal energy production by enabling access to previously untapped geothermal resources. Geothermal short-circuiting poses a significant challenge to EGS development, leading to reduced heat extraction. Deep Eutectic Solvent (DES) exhibits favorable thermal and rheological properties, making it a candidate for geothermal applications. Here, this paper examines Choline Chloride-Based Deep Eutectic Solvent (DES) as a working fluid in geothermal applications and its potential to mitigate geothermal short-circuiting. Hydraulic experiments using a dual fracture flow loop were conducted at high temperatures. The results showed that DES exhibited higher differential pressure behavior compared to water. Flow distribution results revealed that DES enhances flow allocation within the small fracture, particularly when a temperature difference exists between fractures. Specifically, DES increased flow distribution by an average of 11% when the temperature difference was 85°C, and by 13% when the difference was 45°C, relative to water. These findings suggest that DES responds to thermal fracture differences, making it a potential remedy to address geothermal short-circuiting.

15 GEOTHERMAL ENERGY↗

DOE OSTI2020

A note on the instability and pattern formation of shrinkage cracks in viscoplastic soils

In this work we present a theoretical study on the conditions for the onset of cracks, as well as the corresponding pattern formation, in saturated viscoplastic soils under isotropic loading (extension). The type of stress applied is left unspecified, to cover a variety of loadings including shrinkage due to desiccation, isotropic thermal expansion, mechanical loading and so forth. By treating the saturated soil as rigid viscoplastic, we obtain a 2D extension of the Cnoidal Waves equations (Veveakis and Regenauer-Lieb, 2015). By numerically solving the corresponding boundary value problem, we retrieve conditions for the onset of cracking instability in 2D loading, and identify the characteristic spacing between cracks to be a length scale combining all the hydro-mechanical parameters of the problem. Finally, we show that in a rectangular slab of clay under isotropic extension, patterns of triangular, rectangular and hexagonal cracks can tessellate the domain, with the hexagonal pattern being the energetically favored, as it minimizes the free energy of the system.

58 GEOSCIENCES↗

DOE OSTI2024

Use of tritium-rich fuel to improve the yield of layered deuterium/tritium inertial fusion capsules

In deuterium–tritium (DT) ice layered implosions, nearly all hot spot mass at peak burn comes from the dense fuel. Accurate prediction of the fuel mass ablation, including the enthalpy associated with mass inflow into the hot spot from the dense fuel, is essential to understanding the energetics and ignition of the hot spot in layered implosions. A recently published boundary layer analysis (Daughton et al., 2023) indicates a faster mass ablation rate than in previous analyses of layered implosions. Inclusion of this effect provides a better match to simulations and leads to a new ignition threshold where the temperature of the dense fuel plays a critical role. This analysis motivates possible new directions for improved capsule performance. Here, the authors present evidence in support of one such approach: the use of tritium-rich ice to decrease 14 MeV neutron scattering and heating of the dense fuel, resulting in less mass ablation and more robust burn of the hot spot. It is found from numerical simulations that despite a less favorable D:T ratio in the ice, the use of a 40:60 D:T ratio leads to an increase in capsule yield of 17% percent compared with that of a 50:50 D:T ratio fuel for capsules resembling those of the recent N210808 ignition experiment on the NIF (Abu-Shawareb et al., 2022) and an increase of 74% compared with that of a 60:40 D:T ratio fuel capsule. Finally, these results are potentially important for modeling all layered implosions, since some degree of DT fractionization may arise naturally during the beta layering process. In addition, this physics is important for the feasibility of high-gain capsule designs that seek to minimize tritium usage, as in some inertial fusion energy concepts.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

DOE OSTI2024

Individual low-carbon behaviors and influencing factors: Insights from a behavior survey study in China

Climate change is a major global concern. Greenhouse gas emissions that cause global climate change are directly or indirectly affected by human activities. Individual low-carbon behaviors are crucial in reducing CO 2 emissions and improving environmental and ecological health. To effectively promote individual low-carbon behavior, this study designed a questionnaire on the factors influencing individual low-carbon intentions and behavior based on theoretical models of environmental behavior. A total of 2430 valid questionnaires were collected in China. This study focuses on analyzing the impact of demographic characteristics, internal and external factors on individual low-carbon behaviors and their interrelationships. The research shows correlations between internal and external factors in determining low-carbon intention or behaviors. Internal factors-related low-carbon behavior is not closely linked with demographic variables, whereas the external factors-related low-carbon behavior vary significantly by age, residence, education, marital status, occupation, and income. The findings have important implications for designing effective policies to promote low-carbon behaviors, such as creating a more favorable external environment and increasing the use of policy tools for reducing CO 2 emission.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗

DOE OSTI2021

Steric control of mesocate and helicate formation: Bulky pyrrol-2-yl Schiff base complexes of Zn 2+

Regioisomerism about a phenyl spacer alters the number of nuclei which participate in self-assembly with pyrrole/schiff base ditopic ligands. The bulky benzyl ester substituents favor formation of di- and tetranuclear (but not trinuclear) complexes. Here the resulting unusual tetranuclear zinc molecular square is characterized and helicate versus mesocate formation is discussed.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

DOE OSTI2024

A framework to enhance disaster debris estimation with AI and aerial photogrammetry

This study addresses the critical need to enhance disaster preparedness and response, focusing on hurricane impact assessment and debris estimation. Accurate assessments in this context are critical for post-event search-and-rescue (SAR) operations and resource distribution. Recent computing advancements are revealing the potential of unmanned aerial vehicles (UAVs) and artificial intelligence (AI) technologies in collecting data and assisting with post-hurricane reconnaissance. However, the use of AI and UAV photogrammetry for accurate disaster impact analysis remains underexplored. To this end, this study proposes a damage and debris analysis framework harnessing reality capture through aerial imagery and photogrammetry. Within this framework, a region-based neural network is leveraged to detect debris locations in aerial imagery with favorable performance. In a testbed within the Beaumont-Port Arthur region, in Southeast Texas, this study performs 3D reality captures of the built environment. Since the accuracy of the 3D reality capture is of importance in research areas associated with time-sensitive disaster response, we further investigate the optimal 2D aerial imagery overlap ratio required to generate a sufficiently accurate 3D model for disaster impact analysis and debris volume estimation. Results indicate that, in the case of aerial imagery for infrastructure systems, a minimum of 60 % overlap is recommended for damage assessment and debris analysis. In contrast, for flat green areas, a minimum of 50 % overlap is adequate. Overall, for disaster response applications, our study reveals that an overlap ratio between 60 % and 70 % is optimal for achieving a balance between time efficiency and data quality in aerial data collection. Furthermore, these quantitative recommendations are crucial for enabling efficient disaster response efforts. Additionally, our study outcomes will improve disaster impact analysis and facilitating timely and effective response strategies.

Artificial intelligence↗

DOE OSTI2022

Experimental driving performance evaluation of battery-powered medium and heavy duty all-electric vehicles

As the push to reduce air pollutants and carbon dioxide for global warming continues, there is increasing interest in the development and deployment of battery electric vehicles for heavy-duty applications as one of the critical and challenging steps of a broader effort to fully electrify the transportation sector. This study evaluated and quantified the energy consumption rates and energy regeneration rates for three heavy-duty battery electric vehicles (a step van, a yard tractor, and a class 8 truck) using driving cycle tests with a heavy-duty vehicle chassis dynamometer. Information in this area is currently very limited, and yet it is critical to understanding how effective heavy-duty battery electric vehicles will be for a wide range of applications as the electrification of the heavy-duty vehicle market continues to expand. Energy consumption rates ranged from 0.37 and 2.71 kWh/km for most vehicle/cycle combinations. On a diesel liter energy-equivalent basis, the heavy-duty vehicles had approximately 3 to 6 times better energy consumption rates compared to comparable diesel vehicles, with weight normalized energy consumption rates also comparing favorably to the current and future greenhouse gas/fuel economy standards for equivalent diesel vehicles. Based on battery capacities ranging from 80 to 215 kWh, the vehicle ranges varied from 38.18 km to 171.2 km, with ranges of 115.9 km to 171.2 km for most types of driving and lower ranges of 38.18 to 42.20 km for sustained grade cycles. Overall, the advantage of improved energy consumption rates coupled with improvements that can be expected for battery technology and vehicle range, provide promise for expanded use of heavy-duty vehicles going into the future.

33 ADVANCED PROPULSION SYSTEMS↗

DOE OSTI2022

Coordinated operation of pumped-storage hydropower with power and water distribution systems

Small pumped-storage hydropower (PSH) units have gained popularity as distributed energy storage options that can provide flexibility to the operation of power distribution systems. Optimal operation of small PSH units is not only dependent on the energy storage provided to power distribution system, but also on the inflow and outflow of water from and to the water distribution system. Here, in this context, this paper develops an optimization model for coordinated operation of PSH units with power and water distribution systems. The proposed model optimizes the operation of water tanks, variable-speed pumps and PSH in pumping and generating modes to minimize the operation cost of power distribution system, while respecting the power flow constraints of power distribution and hydraulic constraints of water distribution system. Appropriate electricity tariffs are implemented to avoid additional expenses in water distribution system that can be enforced by its coordinated operation in favor of power distribution system. The proposed model is implemented on a 33-bus and a 123-bus test power distribution system connected to a 16-node test water distribution system. Results demonstrate the effectiveness of proposed model in tapping PSH flexibility to reduce the operation cost of power and water distribution systems, while meeting the power and water demands.

13 HYDRO ENERGY↗

DOE OSTI2023

Four-dimensional microstructurally small fatigue crack growth in cyclically loaded nickel superalloy specimen

Here, we nondestructively image a low-solvus high refractory (LSHR) nickel base specimen microstructure during cyclic loading to characterize crack propagation during the microstructurally small crack (MSC) growth regime. Micro-computed tomography (uCT) is used to characterize the material density and identify crack interfaces, while high-energy diffraction microscopy (HEDM) provides snapshots of the microstructural orientation field changes. From these measurements, data are computationally reconstructed and coregistered to describe the specimen’s configuration before load, before crack nucleation, and throughout the crack propagation/loading process. An MSC forms at a FIB-cut notch, which was previously placed to concentrate stress at the center of the specimen gauge, and propagates along a facet parallel to the local {1 1 1} crystallographic plane. Analysis of available crystallographic slip directions and measured point-to-point disorientation axes indicate probable single and coplanar slip activity along FCC octahedral planes within this region. Similar analyses of other crack propagation facets reveal generally slower growth along directions favoring zig-zag cross and codirectional cross slip, which are often disfavored at room temperature.

36 MATERIALS SCIENCE↗

DOE OSTI2023

From lab to table: Expanding gastronomic possibilities with fermentation using the edible fungus Neurospora intermedia

Fermentation is a powerful tool for enhancing flavor, improving sustainability, and expanding creative possibilities in the kitchen. However, most fermentations done in gastronomic contexts are restricted to a small set of readily available microbial species. Expanding beyond this limited biological diversity holds promise to unlock new gastronomic innovation. Here, we explore novel culinary applications of Neurospora intermedia, an edible fungus traditionally used in Java, Indonesia to produce the fermented food oncom. Our work demonstrates that N. intermedia can be readily used in the production of oncom-like meat alternatives with non-traditional substrates, as well as in the production of enzymes for starch-to-sugar conversion. As an example, we harness secreted N. intermedia starch-degrading enzymes to produce an amazake that has a distinct volatile aroma composition compared to traditional amazake produced with Aspergillus oryzae. In addition to providing texture and flavor, N. intermedia can be used to add an orange color to dishes due to the development of brightly colored spores and aerial mycelia. This property, along with its secreted enzymes, was utilized to create a dish for fine-dining restaurant Alchemist in Copenhagen, Denmark. Overall, the novel foods produced in this study were rated favorably in consumer trials, indicating a broad sensory appeal of N. intermedia across different culinary applications and cultural contexts. The protocols and approaches presented in this study represent a new addition to the chef's toolbox that hold promise to expand gastronomic possibilities with fermentation in restaurants and beyond.

59 BASIC BIOLOGICAL SCIENCES↗

DOE OSTI2022

Assessing Impacts on Pressure Stabilization and Leasing Acreage for CO 2 Storage Utilizing Oil Migration Concepts

Favorable geological storage for CO 2 has long been pictured as large anticlines with thick sandstones, similar to oil reservoirs in the petroleum system. Unlike oil, however, stored CO 2 does not need to be recoverable, which raises the possibility of using dissolution and residual trapping to augment the capacity of buoyant traps and tap more of the bulk rock volume. The work presented builds on that idea, asking the following question: If we inject CO 2 down to a syncline – analogous to the carrier bed in the petroleum system – how would this injection mechanism impact storage capacity and plume shape, migration, and stabilization? To address this question, we built a reservoir model, based on seismic interpretation of Middle Miocene strata, offshore Galveston, Texas. 3-D seismic and well logs were used to characterize key intervals. Reservoirs chosen for modeling are progradational-aggradational sands with mud intercalation. They have a higher degree of heterogeneity than the more conventional reservoirs commonly targeted for CO 2 storage. Modeling investigated how far the CO 2 plume would migrate under two scenarios: (1) injecting CO 2 at the base of the salt withdrawal basin (syncline scenario) and (2) injecting CO 2 at the base of the structural closure, similar to a common injection well location for EOR purposes (base scenario). For each scenario, we separately simulated injection of 30 MT of CO 2 and 60 MT of CO 2 continuously for 30 years and observe the plume and pressure evolution for 100 years after the injection stops. The simulation shows that injecting the CO 2 into a syncline limits the vertical migration of CO 2 , thus making synclinal injection more secure. In the syncline scenario, the geological layer around the injection point is more heterogeneous than the layer in the base scenario; thus, the CO 2 tends to migrate laterally. Additionally, in the syncline scenario, the plume does not even reach the upper part of the anticline, allowing us to safely store an additional amount of CO 2 into the reservoir. Furthermore, the simulation also shows that in the syncline scenario, the times needed for the reservoir to reach its stabilized pressure after the end of injections are faster. To summarize, CO 2 injection at the base of a syncline could provide additional storage, increase the safety of the project from the limited vertical plume migration, and expedite plume stabilization, which could result in the decrease of monitoring frequency as the project runs, thus lowering the operating cost of the project in the long run.

58 GEOSCIENCES↗

DOE OSTI2025

Numerical assessment of triply periodic minimal surfaces for direct air capture of carbon dioxide

Direct air capture (DAC) systems often consist of packing material wetted by a capture fluid that reacts with CO 2 in the airstream. The efficiency of the contactor is determined by a complex relationship of fluid dynamics, heat and mass transfer, contactor geometry, and chemical properties. The efficiency of the contactor must be balanced with other factors, primarily pressure drop through the system. Triply periodic minimal surfaces (TPMS) are a class of differential surfaces that have been explored in multiple engineering applications and have been shown to exhibit excellent performance when used in heat exchangers. Their tortuous path provides a high surface-to-volume ratio and favorable trade-off between contact area and pressure drop. In this work, a gyroid-type TPMS contactor was evaluated using computational fluid dynamics for a variety of geometric parameters to explore the potential benefit of TPMS shapes for DAC applications. A thin-film model was employed to model the flow and distribution of the capture solvent, allowing efficient simulations of TPMS structures at scale by eliminating the need for a computationally intensive interface capturing method. A liquid-gas mass transfer model was implemented in the commercial software STAR-CCM+ and used to predict the CO 2 capture efficiency and study the trade-off between capture performance and pressure drop through analysis of capture rates, mass transfer coefficients, and other relevant variables. TPMS contactors with a variety of geometric parameters and two capture solvent options were investigated to determine the effect of design choices on the operational performance of DAC systems. In conclusion, results showed that while contactor geometry is the dominant factor in efficiency and pressure drop, the physiochemical properties of the solvent are an important secondary influence on the contactor performance.

CFD↗