Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “electron”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,279 records · Page 71

Role of Hot-Electron Preheating in the Compression of Direct-Drive Imploding Targets with Cryogenic D2 Ablators

The compression of direct-drive, spherical implosions is studied using cryogenic D2 targets on the 60-beam, 351-nm OMEGA laser with intensities ranging from ~3 x 10^14 to ~1 x 10^15 W/cm^2. The hard-x-ray signal from hot electrons generated by laser-plasma instabilities increases with laser intensity, while the areal density decreases. Mitigating hot-electron production, by reducing the laser intensity to ~3 x 10^14 W/cm^2, results in areal density of the order of ~140 mg/cm^2, in good agreement with 1D simulations. These results will be considered in future direct-drive-ignition designs.

Smalyuk, V A↗

Fundamental High-Pressure Calibration from All-Electron Quantum Monte Carlo Calculations

We develop an all-electron quantum Monte Carlo (QMC) method for solids that does not rely on pseudopotentials, and use it to construct a primary ultra-high-pressure calibration based on the equation of state of cubic boron nitride. We compute the static contribution to the free energy with the QMC method and obtain the phonon contribution from density functional theory, yielding a high-accuracy calibration up to 900 GPa usable directly in experiment. We compute the anharmonic Raman frequency shift with QMC simulations as a function of pressure and temperature, allowing optical pressure calibration. In contrast to present experimental approaches, small systematic errors in the theoretical EOS do not increase with pressure, and no extrapolation is needed. This all-electron method is applicable to first-row solids, providing a new reference for ab initio calculations of solids and benchmarks for pseudopotential accuracy.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Ab Initio Electron-Phonon Interactions in Correlated Electron Systems

Electron-phonon ( e - ph ) interactions are pervasive in condensed matter, governing phenomena such as transport, superconductivity, charge-density waves, polarons, and metal-insulator transitions. First-principles approaches enable accurate calculations of e - ph interactions in a wide range of solids. However, they remain an open challenge in correlated electron systems (CES), where density functional theory often fails to describe the ground state. Therefore reliable e - ph calculations remain out of reach for many transition metal oxides, high-temperature superconductors, Mott insulators, planetary materials, and multiferroics. Here we show first-principles calculations of e - ph interactions in CES, using the framework of Hubbard-corrected density functional theory ( DFT + U ) and its linear response extension ( DFPT + U ), which can describe the electronic structure and lattice dynamics of many CES. We showcase the accuracy of this approach for a prototypical Mott system, CoO, carrying out a detailed investigation of its e - ph interactions and electron spectral functions. While standard DFPT gives unphysically divergent and short-ranged e - ph interactions, DFPT + U is shown to remove the divergences and properly account for the long-range Fröhlich interaction, allowing us to model polaron effects in a Mott insulator. Our work establishes a broadly applicable and affordable approach for quantitative studies of e - ph interactions in CES, a novel theoretical tool to interpret experiments in this broad class of materials.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Characterization of electron clouds in the Cornell Electron Storage Ring Test Accelerator using TE-wave transmission

A relatively new technique for measuring the electron cloud density in storage rings has been developed and successfully demonstrated [S. De Santis, J.M. Byrd, F. Caspers, A. Krasnykh, T. Kroyer, M.T.F. Pivi, and K.G. Sonnad, Phys. Rev. Lett. 100, 094801 (2008).]. We present the experimental results of a systematic application of this technique at the Cornell Electron Storage Ring Test Accelerator. The technique is based on the phase modulation of the TE mode transmitted in a synchrotron beam pipe caused by the periodic variation of the density of electron plasma. Because of the relatively simple hardware requirements, this method has become increasingly popular and has been since successfully implemented in several machines. While the principles of this technique are straightforward, quantitative derivation of the electron cloud density from the measurement requires consideration of several effects, which we address in detail.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Correlated Single-Crystal Electronic Absorption Spectroscopy and X-ray Crystallography at NSLS Beamline X26-C

The research philosophy and new capabilities installed at NSLS beamline X26-C to support electronic absorption and Raman spectroscopies coupled with X-ray diffraction are reviewed. This beamline is dedicated full time to multidisciplinary studies with goals that include revealing the relationship between the electronic and atomic structures in macromolecules. The beamline instrumentation has been fully integrated such that optical absorption spectra and X-ray diffraction images are interlaced. Therefore, optical changes induced by X-ray exposure can be correlated with X-ray diffraction data collection. The installation of Raman spectroscopy into the beamline is also briefly reviewed. Data are now routinely generated almost simultaneously from three complementary types of experiments from the same sample. The beamline is available now to the NSLS general user population.

99 GENERAL AND MISCELLANEOUS↗

Electronic Scanning Strategies in Adaptive Electrical Capacitance Volume Tomography: Tradeoffs and Prospects

Electrical Capacitance Volume Tomography (ECVT) has been applied for imaging of multiphase flows found in industrial applications. The ill-posed nature of the image reconstruction problem in ECVT and the consequent low resolution can be alleviated by employing electronic scanning enabled by electrode segmentation and reconfiguration during data acquisition. Here we study electronic scanning strategies that mimic physical rotation and shifting of the sensor along its symmetry axis. First, we study the feasibility of electronic scanning by analyzing the capacitance transducer circuit in SPICE. Then, we simulate electronic scanning using the finite element method for different electrode shapes, for which we compare the image reconstruction results and acquisition time. We find a noticeable improvement in image resolution for the scanning cases over conventional ECVT. Lastly, among the scanning cases, we emphasize a particular electrode shape that provides the best image resolution along with the minimal amount of acquisition time.

47 OTHER INSTRUMENTATION↗

Electronic structure of molybdenum-oxide films and associated charge injection mechanisms in organic devices

We report on the electronic structure of freshly evaporated and air-exposed Molybdenum tri-oxide (MoO 3 ) and the energy-level alignment between this compound and a hole-transport material [e.g., N,N'-diphenyl-N,N'-bis (1-naphthyl)-1,1'-biphenyl-4,4'-diamine (α-NPD)]. Ultraviolet and inverse photoelectron spectroscopy show that freshly evaporated MoO 3 exhibits deep-lying electronic states with an electron affinity (EA) of 6.7 eV and ionization energy (IE) of 9.7 eV. Air exposure reduces EA and IE by ~1 eV, to 5.5 and 8.6 eV, respectively, but does not affect the hole-injection efficiency, which is confirmed by device studies. Thus, MoO 3 can be applied in low-vacuum environment, which is particularly important for low-cost manufacturing processes. Our findings of the energy-level alignment between MoO 3 and α-NPD also leads to a revised interpretation of the charge-injection mechanism, whereby the hole-injection corresponds to an electron extraction from the organic highest-occupied molecular orbital (HOMO) level via the MoO 3 conduction band.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Design and dosimetry of a few leaf electron collimator for energy modulated electron therapy

Despite the capability of energy modulated electron therapy (EMET) to achieve highly conformal dose distributions in superficial targets it has not been widely implemented due to problems inherent in electron beam radiotherapy such as planning dosimetry accuracy, and verification as well as a lack of systems for automated delivery. In previous work we proposed a novel technique to deliver EMET using an automated 'few leaf electron collimator' (FLEC) that consists of four motor-driven leaves fit in a standard clinical electron beam applicator. Integrated with a Monte Carlo based optimization algorithm that utilizes patient-specific dose kernels, a treatment delivery was incorporated within the linear accelerator operation. The FLEC was envisioned to work as an accessory tool added to the clinical accelerator. In this article the design and construction of the FLEC prototype that match our compact design goals are presented. It is controlled using an in-house developed EMET controller. The structure of the software and the hardware characteristics of the EMET controller are demonstrated. Using a parallel plate ionization chamber, output measurements were obtained to validate the Monte Carlo calculations for a range of fields with different energies and sizes. Further verifications were also performed for comparing 1-D and 2-D dose distributions using energy independent radiochromic films. Comparisons between Monte Carlo calculations and measurements of complex intensity map deliveries show an overall agreement to within {+-}3%. This work confirms our design objectives of the FLEC that allow for automated delivery of EMET. Furthermore, the Monte Carlo dose calculation engine required for EMET planning was validated. The result supports the potential of the prototype FLEC for the planning and delivery of EMET.

61 RADIATION PROTECTION AND DOSIMETRY↗

Comparison of film measurements and Monte Carlo simulations of dose delivered with very high-energy electron beams in a polystyrene phantom

Purpose: To measure radiation dose in a water-equivalent medium from very high-energy electron (VHEE) beams and make comparisons to Monte Carlo (MC) simulation results. Methods: Dose in a polystyrene phantom delivered by an experimental VHEE beam line was measured with Gafchromic films for three 50 MeV and two 70 MeV Gaussian beams of 4.0–6.9 mm FWHM and compared to corresponding MC-simulated dose distributions. MC dose in the polystyrene phantom was calculated with the EGSnrc/BEAMnrc and DOSXYZnrc codes based on the experimental setup. Additionally, the effect of 2% beam energy measurement uncertainty and possible non-zero beam angular spread on MC dose distributions was evaluated. Results: MC simulated percentage depth dose (PDD) curves agreed with measurements within 4% for all beam sizes at both 50 and 70 MeV VHEE beams. Central axis PDD at 8 cm depth ranged from 14% to 19% for the 5.4–6.9 mm 50 MeV beams and it ranged from 14% to 18% for the 4.0–4.5 mm 70 MeV beams. MC simulated relative beam profiles of regularly shaped Gaussian beams evaluated at depths of 0.64 to 7.46 cm agreed with measurements to within 5%. A 2% beam energy uncertainty and 0.286° beam angular spread corresponded to a maximum 3.0% and 3.8% difference in depth dose curves of the 50 and 70 MeV electron beams, respectively. Absolute dose differences between MC simulations and film measurements of regularly shaped Gaussian beams were between 10% and 42%. Conclusions: The authors demonstrate that relative dose distributions for VHEE beams of 50–70 MeV can be measured with Gafchromic films and modeled with Monte Carlo simulations to an accuracy of 5%. The reported absolute dose differences likely caused by imperfect beam steering and subsequent charge loss revealed the importance of accurate VHEE beam control and diagnostics.

07 ISOTOPE AND RADIATION SOURCES↗

SU-F-SPS-05: Experimental Validation of Peripheral Dose Distribution of Electron Beams for Eclipse Electron Monte Carlo Algorithm

Purpose: In this study, the two available calculation algorithms of the Varian Eclipse treatment planning system(TPS), the electron Monte Carlo(eMC) and General Gaussian Pencil Beam(GGPB) algorithms were used to compare measured and calculated peripheral dose distribution of electron beams. Methods: Peripheral dose measurements were carried out for 6, 9, 12, 15, 18 and 22 MeV electron beams of Varian Triology machine using parallel plate ionization chamber and EBT3 films in the slab phantom. Measurements were performed for 6×6, 10×10 and 25×25cm{sup 2} cone sizes at dmax of each energy up to 20cm beyond the field edges. Using the same film batch, the net OD to dose calibration curve was obtained for each energy. Films were scanned 48 hours after irradiation using an Epson 1000XL flatbed scanner. Dose distribution measured using parallel plate ionization chamber and EBT3 film and calculated by eMC and GGPB algorithms were compared. The measured and calculated data were then compared to find which algorithm calculates peripheral dose distribution more accurately. Results: The agreement between measurement and eMC was better than GGPB. The TPS underestimated the out of field doses. The difference between measured and calculated doses increase with the cone size. The largest deviation between calculated and parallel plate ionization chamber measured dose is less than 4.93% for eMC, but it can increase up to 7.51% for GGPB. For film measurement, the minimum gamma analysis passing rates between measured and calculated dose distributions were 98.2% and 92.7% for eMC and GGPB respectively for all field sizes and energies. Conclusion: Our results show that the Monte Carlo algorithm for electron planning in Eclipse is more accurate than previous algorithms for peripheral dose distributions. It must be emphasized that the use of GGPB for planning large field treatments with 6 MeV could lead to inaccuracies of clinical significance.

60 APPLIED LIFE SCIENCES↗

Nematic Electronic Structure in the “Parent” State of the Iron-Based Superconductor Ca(Fe1–xCox)2As2

The mechanism of high-temperature superconductivity in the newly discovered iron-based superconductors is unresolved. We use spectroscopic imaging-scanning tunneling microscopy to study the electronic structure of a representative compound CaFe{sub 1.94}Co{sub 0.06}As{sub 2} in the 'parent' state from which this superconductivity emerges. Static, unidirectional electronic nanostructures of dimension eight times the inter-iron-atom distance a{sub Fe-Fe} and aligned along the crystal a axis are observed. In contrast, the delocalized electronic states detectable by quasiparticle interference imaging are dispersive along the b axis only and are consistent with a nematic a{sub 2} band with an apparent band folding having wave vector q {approx_equal} {+-} 22{pi}/8a Fe-Fe along the a axis. All these effects rotate through 90 degrees at orthorhombic twin boundaries, indicating that they are bulk properties. As none of these phenomena are expected merely due to crystal symmetry, underdoped ferropnictides may exhibit a more complex electronic nematic state than originally expected.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Electron state density and electron diffusion coefficient in energy space in nonideal nonequilibrium plasmas

We suggest a model for a hydrogenic low-temperature nonequilibrium nonideal plasma that allows the kinetic parameters of the plasma to be calculated by the method of molecular dynamics by taking into account the interparticle interaction. The charges interact according to Coulomb's law; for unlike charges, the interaction is assumed to be equal to a constant at a distance smaller than several Bohr radii. For a system of particles, we solve the classical equations of motion under periodic boundary conditions. The initial conditions are specified in such a way that the electrons have a positive total energy. We consider the temperatures 1-50 K and densities n = 10{sup 9}-10{sup 10} cm{sup -3} produced in an experiment through laser cooling and resonant excitation. We calculate the electron state density as a function of the plasma coupling parameter and the electron diffusion coefficient in energy space for highly excited (Rydberg) electron states close to the boundary of the discrete and continuum spectra.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Probability and shape of the spectral line of a single bulk characteristic energy loss of a fast electron in a medium with electron absorption and strong spatial dispersion

The probability of single characteristic energy loss of a fast electron in a reflection experiment has been calculated. Unlike many works concerning this subject, the bremsstrahlung of bulk plasmons in the non- Cherenkov ranges of frequencies and wavevectors of a plasmon has been taken into account. The contributions to the probability of single loss and to the shape of the spectral line from a quantum correction that is due to the interference of elastic and inelastic electron scattering events have been determined. The probability has been calculated in the kinetic approximation for the relative permittivity, where the short-wavelength range of the plasmon spectrum is correctly taken into account. In view of these circumstances, the expression for the mean free path of the electron with respect to the emission of a bulk plasmon that was obtained by Pines [D. Pines, Elementary Excitations in Solids (Benjamin, New York, 1963)] has been refined. The coherence length of the fast electron in the medium-energy range under consideration has been estimated. The shape of the spectral line of energy losses in the non-Cherenkov frequency range has been determined. It has been shown that the probability of the single emission of the bulk plasmon incompletely corresponds to the Poisson statistics.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Electronic Structure and Electronic Properties of PtSn{sub 4} Single Crystal

A topological semimetal PtSn{sub 4} single crystal is grown and the following properties are studied: its electrical resistivity in the temperature range from 4.2 to 300 K, galvanomagnetic properties at temperatures from 4.2 to 80 K and in magnetic fields of up to 100 kOe, and optical properties at room temperature. Theoretical calculations of the electronic structure are performed. It is shown that the residual resistivity is rather small: ρ{sub 0} = 0.47 μΩ cm, which is characteristic of a “good” metal. The ρ(T) dependence is of the metallic type, increasing monotonically with temperature. Analysis of the temperature dependences of the magnetoresistivity suggests that the Fermi surface of the PtSn{sub 4} compound may contain closed sheets. Studies of the Hall effect and the estimates made in the single-band model allowed us to conclude that the predominant type of current carriers are holes with concentration n = 6.8 × 10{sup 21} cm{sup –3} and mobility μ ≈ 1950 cm{sup 2}/(V s) at T = 4.2 K. It is shown that the optical properties of PtSn{sub 4} have features characteristic of “bad” metals. The calculation of the electronic structure of PtSn{sub 4} showed that, in general, this compound has a structure characteristic of metallic systems with a sufficiently large number of electronic states at the Fermi level, which is consistent with the experimental results on the electronic transport and optical properties of the PtSn{sub 4} single crystal.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Methods of optical diagnostics of electron-positron beams and interaction between plasma and high-current electron beam

Optical diagnostics is widely used, both in plasma-physics experiments and in measuring parameters of electron and positron beams in accelerators. In doing so, the approaches with the same methodological base are often applied, which is explained by similarity of certain properties of objects under study despite the fact that these fields of physics are absolutely specific and require using the specialized techniques. The possibility of close contacts and cooperation among scientists concerned with similar problems in different fields of physics contributes to the fruitful exchange of ideas and helps to overcome these problems. It is especially characteristic of the Budker Institute of Nuclear Physics, Siberian Branch of Russian Academy of Sciences, which is famous for pioneering works in the field of electron-positron colliders and controlled thermonuclear fusion. The first part of this paper presents a review of optical diagnostics of the stationary beam parameters in cyclic accelerators of electrons and positrons. The only techniques considered are those that became the recognized tools at colliders and storage rings of the latest generation, without which the routine operation of the facility is difficult to imagine. The second part of the paper describes optical diagnostics used in experiments of heating the plasma by a high-current electron beam.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Modern methods for calculating photoionization and electron-impact ionization of two-electron atoms and molecules

A number of recently developed methods for calculating multifold differential cross sections for photoionization and electron impact ionization of atoms and molecules with two active electrons are reviewed. The methods are based on unique approaches to the calculation of three-body Coulomb wave functions. The exterior scaling method and the driven Schrödinger equation formalism are considered. The effectiveness of the time-dependent approaches to the scattering problem, such as the paraxial approximation and the time-dependent scaling, is demonstrated. A novel numerical method is formulated, which has been developed by the authors to solve the six-dimensional Schrödinger equation for an atom with two active electrons on the basis of the Chang-Fano transformation and the discrete variable representation. The threshold behavior manifested by the angular distributions of the two-electron photoionization of a negative hydrogen ion and a helium atom and the multifold differential cross sections for the electronimpact ionization of hydrogen and nitrogen molecules are analyzed on the basis of numerical simulations. The Wannier law for the angular distribution of double ionization is demonstrated to be incorrect even at very low energies.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Electronic properties and deep traps in electron-irradiated n-GaN

The study is concerned with the effect of electron irradiation (with the energies E = 7 and 10 MeV and doses D = 10{sup 16}-10{sup 18} cm{sup -2}) and subsequent heat treatments in the temperature range 100-1000 Degree-Sign C on the electrical properties and the spectrum of deep traps of undoped (concentration of electrons n = 1 Multiplication-Sign 10{sup 14}-1 Multiplication-Sign 10{sup 16} cm{sup -3}), moderately Si-doped (n = (1.2-2) Multiplication-Sign 10{sup 17} cm{sup -3}), and heavily Si-doped (n = (2-3.5) Multiplication-Sign 10{sup 18} cm{sup -3}) epitaxial n-GaN layers grown on Al{sub 2}O{sub 3} substrates by metal-organic chemical vapor deposition. It is found that, on electron irradiation, the resistivity of n-GaN increases, this is due to a shift of the Fermi level to the limiting position close to E{sub c} -0.91 eV. The spectrum of deep traps is studied for the initial and electron-irradiated n-GaN. It is shown that the initial properties of the irradiated material are restored in the temperature range 100-1000 Degree-Sign C, with the main stage of the annealing of radiation defects at about 400 Degree-Sign C.

36 MATERIALS SCIENCE↗