Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “difference frequency”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,279 records · Page 71
All sourcesNASA NTRSDOE OSTI
DOE OSTI2023

Theoretical investigation of the triggering of neoclassical tearing modes by transient resonant magnetic perturbations in NSTX

The extended perturbed equilibrium code asymptotic matching code is used to simulate the triggering of n = 1 neoclassical tearing modes (NTMs) by a pulsed, rotating, n = 1, resonant magnetic perturbation (RMP) in two example NSTX discharges. Although the two discharges are significantly different from one another, the results of the two sets of simulations are quite similar. The critical n = 1 RMP pulse amplitude required to trigger an n = 1 NTM is minimized when the RMP pulse rotation frequency matches the linear natural frequency of an n = 1 tearing mode, resonant within the plasma, that is metastable to an NTM. However, if there is a frequency mismatch, then the seed magnetic island chain driven at the relevant resonant surface is forced to rotate with respect to the RMP, because the RMP pulse amplitude is nowhere near sufficient to lock the island chain to the RMP. This rotation causes the critical RMP pulse amplitude required to trigger an NTM to oscillate as the RMP pulse duration is varied. Furthermore, the critical amplitude is minimized when the RMP pulse duration is such that seed island chain executes a half-integer number of rotations with respect to the pulse. All of the minima have the same value.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2025

The low frequency edge oscillation in alcator C-Mod and ASDEX upgrade I-mode

The low frequency edge oscillation (LFEO) is a low frequency fluctuation in many plasma quantities in the pedestal region of the I-Mode confinement regime. It is observed on Alcator C-Mod between 10–30 kHz and on ASDEX Upgrade between 5–10 kHz. On both tokamaks it has been previously identified as a geodesic acoustic mode (GAM), however the recent discovery of the edge temperature ring oscillation (ETRO) in a similar frequency and spatial location as the LFEO in I-Modes on EAST has called this identification into question. In this paper we investigate the LFEO on C-Mod and AUG using a variety of different experimental techniques including spectral analysis, magnetic mode number analysis, localization, and direct measurement of the LFEO zonal structure and propagation using a mirror Langmuir probe. This investigation has reconfirmed the identification of the LFEO as a GAM and determined that it has several key differences from the ETRO.

AUG↗
DOE OSTI2024

Overlooked cooling effects of albedo in terrestrial ecosystems

Radiative forcing (RF) resulting from changes in surface albedo is increasingly recognized as a significant driver of global climate change but has not been adequately estimated, including by Intergovernmental Panel on Climate Change (IPCC) assessment reports, compared with other warming agents. Here, we first present the physical foundation for modeling albedo-induced RF and the consequent global warming impact (GWI Δα ). We then highlight the shortcomings of available current databases and methodologies for calculating GWI Δα at multiple temporal scales. There is a clear lack of comprehensive in situ measurements of albedo due to sparse geographic coverage of ground-based stations, whereas estimates from satellites suffer from biases due to the limited frequency of image collection, and estimates from earth system models (ESMs) suffer from very coarse spatial resolution land cover maps and associated albedo values in pre-determined lookup tables. Field measurements of albedo show large differences by ecosystem type and large diurnal and seasonal changes. As indicated from our findings in southwest Michigan, GWI Δα is substantial, exceeding the RF Δα values of IPCC reports. Inclusion of GWI Δα to landowners and carbon credit markets for specific management practices are needed in future policies. We further identify four pressing research priorities: developing a comprehensive albedo database, pinpointing accurate reference sites within managed landscapes, refining algorithms for remote sensing of albedo by integrating geostationary and other orbital satellites, and integrating the GWI Δα component into future ESMs.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2023

Finite-time correlations boost large voltage angle fluctuations in electric power grids

Abstract Decarbonization in the energy sector has been accompanied by an increased penetration of new renewable energy sources in electric power systems. Such sources differ from traditional productions in that, first, they induce larger, undispatchable fluctuations in power generation and second, they lack inertia. Recent measurements have indeed reported long, non-Gaussian tails in the distribution of local voltage frequency data. Large frequency deviations may induce grid instabilities, leading in worst-case scenarios to cascading failures and large-scale blackouts. In this article, we investigate how correlated noise disturbances, characterized by the cumulants of their distribution, propagate through meshed, high-voltage power grids. For a single source of fluctuations, we show that long noise correlation times boost non-Gaussian voltage angle fluctuations so that they propagate similarly to Gaussian fluctuations over the entire network. However, they vanish faster, over short distances if the noise fluctuates rapidly. We furthermore demonstrate that a Berry–Esseen theorem leads to the vanishing of non-Gaussianities as the number of uncorrelated noise sources increases. Our predictions are corroborated by numerical simulations on realistic models of power grids.

24 POWER TRANSMISSION AND DISTRIBUTION↗
DOE OSTI2020

Efficient 3-D velocity model building using joint inline and crossline plane-wave wave-equation migration velocity analyses

SUMMARY Wave-equation migration velocity analysis (WEMVA) is an image-domain inversion method for velocity model building. Automatic plane-wave WEMVA (PWEMVA) calculates the moveouts of plane-wave common-image gathers (CIGs) by searching a best-fitting parabola with semblance analysis and backprojects residual CIG moveouts into wavefield wave paths with a reflection tomographic kernel. However, 3-D PWEMVA is very computationally expensive because 3-D reflection tomographic inversion requires at least five 3-D reverse-time migrations per iteration and stores two types of source wavefields at model boundaries. We develop a joint inline and crossline PWEMVA method for efficient 3-D velocity model building. We alternatively implement the inline and crossline PWEMVAs with a constraint for each other, in which we iteratively construct the 3-D velocity model update through 1-D spline interpolation of 2-D gradients. The inline and crossline joint inversion is practical since PWEMVA only inverts for low-wavenumber velocity perturbations along wave paths, and the method can take less than 1 per cent of the computational cost of full 3-D PWEMVA. To construct unaliased plane waves for our joint inline and crossline PWEMVA, we develop a 3-D data interpolation method in the frequency–wavenumber (FK) domain to recover regularly and randomly missing traces. The method minimizes the misfit on sufficiently localized data subsets with iterative optimal step lengths and a gradient preconditioner that iteratively selects dominant dips along different azimuths. In numerical experiments, we use a 3-D synthetic seismic data set and a land 3-D field seismic data set acquired at the Farnsworth CO2-EOR (enhanced oil recovery) field to demonstrate the efficacy of our velocity model building and data interpolation methods.

Liu, Xuejian↗
DOE OSTI2021

Stability of the peroxide group in BaO 2 under high pressure

Alkaline earth metal peroxides are typical examples of ionic compounds containing polyanions. We herein report a stable BaO 2 phase at high pressure up to 130 GPa found via a first-principles computational structure searches and high-pressure experimental investigations. The identified monoclinic structure (space group C2/m) can be derived by sublattice distortions of Ba atoms and peroxide groups associated with the phonon mode softening of the lower-pressure Cmmm structure. Contrary to the previous expectation of polymerization of the peroxide group at elevated pressure, the new phase retains the peroxide group and interestingly exhibits an insulating behavior demonstrating an increase of the band gap under compression. Our synchrotron XRD measurements could not distinguish between Cmmm and C2/m BaO 2 definitively because the difference in XRD patterns is very subtle. However, our data do not show any sign of polymerization transition up to 120 GPa. Raman spectra of the O-O peroxide vibration show a small anomaly in frequency at 110 GPa, which is qualitatively similar to that predicted theoretically due to the Cmmm to C2/m phase transition thus supporting the predicted transformation.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2024

Laser Excitation of the Th-229 Nucleus

The 8.4 eV nuclear isomer state in Th-229 is resonantly excited in Th-doped CaF 2 crystals using a tabletop tunable laser system. A resonance fluorescence signal is observed in two crystals with different Th-229 dopant concentrations, while it is absent in a control experiment using Th-232. The nuclear resonance for the Th 4 + ions in Th: CaF 2 is measured at the wavelength 148.3821(5) nm, frequency 2020.409(7) THz, and the fluorescence lifetime in the crystal is 630(15) s, corresponding to an isomer half-life of 1740(50) s for a nucleus isolated in vacuum. These results pave the way toward Th-229 nuclear laser spectroscopy and realizing optical nuclear clocks. Published by the American Physical Society 2024

Physics↗
DOE OSTI2021

AADL: Anderson Accelerated Deep Learning

We propose a stable, distributed approach to perform AA that accelerates the convergence rate of stochastic first-order optimizers to train neural networks. Differently from previous works, we do not alter neither the scheme to perform AA nor the loss function minimized during the training. To improve robustness against stagnation, we customize general guidelines that suggest to relax the frequency of AA corrections by performing AA only at the end of an entire training epoch. To improve robustness of AA against the stochastic oscillations of first-order optimizers, we average the gradients computed on consecutive stochastic optimization updates. The improved regularity of the converging sequence and the reduced amplitude of stochastic oscillations across consecutive optimization steps allows AA to efficiently extrapolate an improved converging sequence, thereby overcoming limitations of existing approaches to perform AA on stochastic optimization.

Lupo Pasini, Massimiliano [Oak Ridge National Lab.↗
DOE OSTI2023

Doppler Lidar Measurements of Wind Variability and LLJ Properties in Central Oklahoma during the August 2017 Land–Atmosphere Feedback Experiment

Abstract Low-level jets (LLJs) are an important nocturnal source of wind energy in the U.S. Great Plains. An August 2017 lidar-based field-measurement campaign [the Land–Atmosphere Feedback Experiment (LAFE)] studied LLJs over the central SGP site in Oklahoma and found nearly equal occurrences of the usual southerly jets and postfrontal northeasterly jets—typically rare during this season—for an opportunity to compare the two types of LLJs during this month. Southerly winds were stronger than the northeasterlies by more than 4 m s −1 on average, reflecting a significantly higher frequency of winds stronger than 12 m s −1 . The analysis of this dataset has been expanded to other SGP Doppler-lidar sites to quantify the variability of winds and LLJ properties between sites of different land use. Geographic variations of winds over the study area were noted: on southerly wind nights, the winds blew stronger at the highest, westernmost sites by 2 m s −1 , whereas on the northeasterly flow nights, the easternmost sites had the strongest wind speeds. Lidar measurements at 5 sites during August 2017, contrasted to the 2016–21 summertime data, revealed unusual wind and LLJ conditions. Temporal hodographs using hourly averaged winds at multiple heights revealed unorganized behavior in the turbulent stable boundary layer (SBL) below the jet nose. Above the nose, some nights showed veering qualitatively similar to inertial oscillation (IO) behavior, but at amplitudes much smaller than expected for an IO, whereas other nights showed little veering. Vertical hodographs had a linear shape in the SBL, indicating little directional shear there, and veering above, resulting in a hook-shaped hodograph with height. Significance Statement Doppler-lidar measurements at the Atmospheric Radiation Measurement (ARM) Southern Great Plains (SGP) were used to quantify the variability of winds and low-level jet (LLJ) properties between five sites of different land use and wind regimes across this area. Knowledge of wind and LLJ structure and dynamics is important for many applications, and strong southerly LLJ winds at night are an important resource for wind energy. The analysis of multiyear (2016–21) summertime LLJ parameters provided insight into the LLJ climatology in this part of the Great Plains.

Meteorology & Atmospheric Sciences↗
DOE OSTI2020

Understanding Diverse Model Projections of Future Extreme El Niño

The majority of future projections in the Coupled Model Intercomparison Project (CMIP5) show more frequent exceedances of the 5 mm day -1 rainfall threshold in the eastern equatorial Pacific rainfall during El Niño, previously described in the literature as an increase in “extreme El Niño events”; however, these exceedance frequencies vary widely across models, and in some projections actually decrease. Here we combine single-model large ensemble simulations with phase 5 of the Coupled Model Intercomparison Project (CMIP5) to diagnose the mechanisms for these differences. The sensitivity of precipitation to local SST anomalies increases consistently across CMIP-class models, tending to amplify extreme El Niño occurrence; however, changes to the magnitude of ENSO-related SST variability can drastically influence the results, indicating that understanding changes to SST variability remains imperative. Future El Niño rainfall intensifies most in models with 1) larger historical cold SST biases in the central equatorial Pacific, which inhibit future increases in local convective cloud shading, enabling more local warming; and 2) smaller historical warm SST biases in the far eastern equatorial Pacific, which enhance future reductions in stratus cloud, enabling more local warming. Additionally, these competing mechanisms complicate efforts to determine whether CMIP5 models under- or overestimate the future impacts of climate change on El Niño rainfall and its global impacts. However, the relation between future projections and historical biases suggests the possibility of using observable metrics as “emergent constraints” on future extreme El Niño, and a proof of concept using SSTA variance, precipitation sensitivity to SST, and regional SST trends is presented.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Frequency-domain terahertz spectroscopy using long-carrier-lifetime photoconductive antennas

We present a telecommunication-compatible frequency-domain terahertz spectroscopy system realized by novel photoconductive antennas without using short-carrier-lifetime photoconductors. Built on a high-mobility InGaAs photoactive layer, these photoconductive antennas are designed with plasmonics-enhanced contact electrodes to achieve highly confined optical generation near the metal/semiconductor surface, which offers ultrafast photocarrier transport and, hence, efficient continuous-wave terahertz operation including both generation and detection. Consequently, using two plasmonic photoconductive antennas as a terahertz source and a terahertz detector, we successfully demonstrate frequency-domain spectroscopy with a dynamic range more than 95 dB and an operation bandwidth of 2.5 THz. Moreover, this novel approach to terahertz antenna design opens up a wide range of new possibilities for many different semiconductors and optical excitation wavelengths to be utilized, therefore bypassing short-carrier-lifetime photoconductors with limited availability.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Improving Predictability of Mixed-Phase Clouds and Aerosol Interactions in the Community Earth System Model (CESM) with ARM Measurements

The objective of this project is to improve the simulation and predictability of mixed-phase clouds and aerosol interactions in the Community Earth System Model (CESM) through comparisons with the DOE ARM observations. There are four major goals of the proposed study: (1) Improve the representation of ice microphysical processes in mixed-phase clouds; (2) Develop a long-term multi-sensor mixed-phase cloud dataset; (3) Test the performance of improved ice microphysics in CESM-CAM5 with the ARM data; and (4) Examine mixed-phase cloud microphysics-aerosol-dynamics-radiation interactions in CESM-CAM5. In this project, we have (1) Improved the representation of ice microphysical processes in mixed-phase clouds that include ice nucleation, ice depositional growth through the Wegener–Bergeron–Findeisen (WBF) process, feedbacks between cloud microphysics, dynamics and radiation, and provides links to aerosol properties in the Community Earth System Model (CESM)-Community Atmosphere Model version 5 (CAM5); (2) Developed a long-term multi-sensor mixed-phase cloud dataset. The mixed-phase cloud retrieval algorithms are improved by refining the phase determinations and ice number concentration retrievals. A multi-year mixed-phase cloud observation dataset (1999-2004; October 2013-February 2017) is regenerated at the ARM Barrow site with the improved algorithms. The dataset has been used in the global model evaluation to improve the model parameterizations; (3) Tested the performance of improved ice microphysics in CESM-CAM5 with the ARM data. CESM-CAM5 is run in the DOE Cloud-Associated Parameterizations Testbed (CAPT) and in the single-column model (SCM) mode to facilitate comparison with ARM observations. Multi-year CAPT simulations of seasonal variations of cloud microphysical properties, cloud liquid water path (LWP) and ice water path (IWP), cloud longwave and shortwave forcings, cloud occurrence frequency are evaluated against the ARM multi-sensor mixed-phase cloud retrievals; and (4) Examined mixed-phase cloud microphysics-aerosol-dynamics-radiation interactions in CESM-CAM5 that include the impacts of different ice nucleation mechanisms, sensitivity to dust IN concentration, treatment of the WBF process on mixed-phase cloud properties. Aerosol effect on mixed-phase clouds through the liquid phase (droplet activation) and ice phase processes (e.g., the glaciation indirect effect) is investigated.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2023

Spread Spectrum Time Domain Reflectometry (SSTDR) and Frequency Domain Reflectometry (FDR) for Detection of Cable Anomalies Using Machine Learning

Cables are initially qualified for nuclear power plant use for 40 years. As plants extend their operating license to 60 and 80 years, continued use of these cables must shift to a performance-based approach since it is cost prohibitive to completely replace cables that are likely still capable of performing their design function. A variety of cable tests are available and are commonly applied during outages when the cables can be taken out of service. Frequency domain reflectometry (FDR) is one of these test methods that is being more broadly accepted and used because it not only detects anomalies along the cable with a low-voltage signal that does not stress the cable insulation, but the technique also locates the anomalies. This supports follow-up local inspection and local repair or partial replacement of a damaged cable segment. Currently, FDR testing is only applied to cables that are taken out of service since the test instrument would be damaged by operational voltages. A related technology that has found some acceptance in the aircraft and rail industry is spread spectrum time domain reflectometry (SSTDR). This technology has been implemented with a custom commercial instrument by LiveWire Innovation Inc. that is designed to operate on live cables up to 1000 volts. One of the main conclusions of a previous effort was that cable reflectometry plots can be difficult for humans to analyze due to baseline noise, low or noisy anomaly response peaks, or large responses from cable ends. Detection of cable anomalies for many of these frequencies and test conditions was challenging for manual analysis. This presented an ideal opportunity for ML analysis to distinguish undamaged cable indications from anomalous cable indications. This research discusses application of machine learning (ML) to reflectometry cable test methods. The goal was to assess feasibility to distinguish undamaged cable reflectometry responses from damaged or anomalous cable reflectometry responses. The assessment considered the 3 instruments, multiple frequency bandwidths from each instrument, multiple cable anomalies and test conditions, and both supervised and unsupervised ML approaches. Although approaches and analysis methods were not identical or directly comparable, both outputs were encouraging. The unsupervised prediction weighted accuracy was assessed by instrument and by frequency. It performed better at high frequencies with the highest prediction accuracy of 0.84 for the higher frequency FDR, 0.79 for the 48-MHz LiveWire SSTDR, and 0.77 for 300-MHz PNNL SSTDR. The initial weighted accuracy average across all frequencies for using supervised ML was 0.56 to 0.68. The supervised analysis was repeated with noisier training data removed resulting in weighted accuracies of 0.69 to 0.87. These weighted accuracies are not directly comparable due to differences in the supervised and unsupervised analysis details but do indicate an encouraging trend. Even with limited and unbalanced data, strong prediction accuracies seem encouraging for further work including more data under a wider range of conditions.

42 ENGINEERING↗
DOE OSTI2026

Hydrodynamic Analysis and Optimization of Aquantis Marine Turbine: Cooperative Research and Development (Final Report)

The primary aim of this proposal is to improve the accurate prediction of hydrodynamic performance and dynamic load responses of the AQ10 floating axial-flow tidal turbine with a tri-cat mooring configuration. The validation of reduced-order modeling approaches with high-fidelity model will be implemented. Additionally, the frequency response domain, Response Amplitude Floating Wind (RAFT) toolbox plus an optimizer expanded for marine hydrokinetic turbines under the Submarine Hydrokinetic And Riverine Kilo-megawatt. Systems (SHARKS) program will be used for designing and exploring different key design parameters (platform dimension, mooring layout and its parameters) of next marine hydrokinetic (MHK) turbine generation.

16 TIDAL AND WAVE POWER↗
DOE OSTI2024

Relationships between Habitual Polyphenol Consumption and Gut Microbiota in the INCLD Health Cohort

While polyphenol consumption is often associated with an increased abundance of beneficial microbes and decreased opportunistic pathogens, these relationships are not completely described for polyphenols consumed via habitual diet, including culinary herb and spice consumption. This analysis of the International Cohort on Lifestyle Determinants of Health (INCLD Health) cohort uses a dietary questionnaire and 16s microbiome data to examine relationships between habitual polyphenol consumption and gut microbiota in healthy adults (n = 96). In this exploratory analysis, microbial taxa, but not diversity measures, differed by levels of dietary polyphenol consumption. Taxa identified as exploratory biomarkers of daily polyphenol consumption (mg/day) included Lactobacillus, Bacteroides, Enterococcus, Eubacterium ventriosum group, Ruminococcus torques group, and Sutterella. Taxa identified as exploratory biomarkers of the frequency of polyphenol-weighted herb and spice use included Lachnospiraceae UCG-001, Lachnospiraceae UCG-004, Methanobrevibacter, Lachnoclostridium, and Lachnotalea. Several of the differentiating taxa carry out activities important for human health, although out of these taxa, those with previously described pro-inflammatory qualities in certain contexts displayed inverse relationships with polyphenol consumption. Our results suggest that higher quantities of habitual polyphenol consumption may support an intestinal environment where opportunistic and pro-inflammatory bacteria are represented in a lower relative abundance compared to those with less potentially virulent qualities.

60 APPLIED LIFE SCIENCES↗
DOE OSTI2020

Planck 2018 results. V. CMB power spectra and likelihoods

We describe the legacy Planck cosmic microwave background (CMB) likelihoods derived from the 2018 data release. The overall approach is similar in spirit to the one retained for the 2013 and 2015 data release, with a hybrid method using different approximations at low ( ℓ < 30) and high ( ℓ ≥ 30) multipoles, implementing several methodological and data-analysis refinements compared to previous releases. With more realistic simulations, and better correction and modelling of systematic effects, we can now make full use of the CMB polarization observed in the High Frequency Instrument (HFI) channels. The low-multipole EE cross-spectra from the 100 GHz and 143 GHz data give a constraint on the ΛCDM reionization optical-depth parameter τ to better than 15% (in combination with the TT low- ℓ data and the high- ℓ temperature and polarization data), tightening constraints on all parameters with posterior distributions correlated with τ . We also update the weaker constraint on τ from the joint TEB likelihood using the Low Frequency Instrument (LFI) channels, which was used in 2015 as part of our baseline analysis. At higher multipoles, the CMB temperature spectrum and likelihood are very similar to previous releases. A better model of the temperature-to-polarization leakage and corrections for the effective calibrations of the polarization channels (i.e., the polarization efficiencies) allow us to make full use of polarization spectra, improving the ΛCDM constraints on the parameters θ MC , ω c , ω b , and H 0 by more than 30%, and n s by more than 20% compared to TT-only constraints. Extensive tests on the robustness of the modelling of the polarization data demonstrate good consistency, with some residual modelling uncertainties. At high multipoles, we are now limited mainly by the accuracy of the polarization efficiency modelling. Using our various tests, simulations, and comparison between different high-multipole likelihood implementations, we estimate the consistency of the results to be better than the 0.5 σ level on the ΛCDM parameters, as well as classical single-parameter extensions for the joint likelihood (to be compared to the 0.3 σ levels we achieved in 2015 for the temperature data alone on ΛCDM only). Minor curiosities already present in the previous releases remain, such as the differences between the best-fit ΛCDM parameters for the ℓ < 800 and ℓ > 800 ranges of the power spectrum, or the preference for more smoothing of the power-spectrum peaks than predicted in ΛCDM fits. These are shown to be driven by the temperature power spectrum and are not significantly modified by the inclusion of the polarization data. Overall, the legacy Planck CMB likelihoods provide a robust tool for constraining the cosmological model and represent a reference for future CMB observations.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2021

Gaining Insights in Loading Events for Wind Turbine Drivetrain Prognostics

Wind energy is one of the largest sources of renewable energy in the world. To further reduce the operations and maintenance (O&M) costs of wind farms, it is essential to be able to accurately pinpoint the root causes of different failure modes of interest. An example of such a failure mode that is not yet fully understood is white etching cracks (WEC). This can cause the bearing lifetime to be reduced to 5–10% of its design value. Multiple hypotheses are available in literature concerning its cause. To be able to validate or disprove these hypotheses, it is essential to have historic high-frequency measurement data (e.g., load and vibration levels) available. In time, this will allow linking to the history of the turbine operating data with failure data. This paper discusses the dynamic loading on the turbine during certain events (e.g., emergency stops, run-ups, and during normal operating conditions). By combining the number of specific events that each turbine has seen with the severity of each event, it becomes possible to assess which turbines are most likely to show signs of damage.

49 EE - Wind and Water Power Program - Wind (EE-4W↗
DOE OSTI2025

Solid-state batteries enabled by ultra-high-frequency self-heating

Solid-state batteries (SSBs) are promising next-generation batteries due to their high energy density and enhanced thermal stability and safety. However, their sluggish kinetics and transport at room temperature result in high internal impedance and critically reduce the attainable discharge energy density. Taking advantage of their strong temperature-dependent ionic conductivity, here we introduce ultra-high-frequency (greater than 105 Hz) self-heating (UHFSH) of SSBs, which can rapidly warm up the batteries from room temperature to operating temperature (∼65°C) in less than a minute. As proof of concept, UHFSH experiments were conducted on symmetric solid-state cells with lithium aluminum germanium phosphate electrolyte in different configurations. Using an experimentally validated model, pack-level simulations predict fast heating (50 K/min) and minimized heating energy consumption (less than 4%). Without any modification of the materials or structure of the batteries, our non-intrusive self-heating strategy potentially enables SSBs to discharge more than 2-fold energy in 25°C ambient.

pulse heating↗