Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “desorption”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,279 records · Page 71

Automatic Analyte-Ion Recognition and Background Removal for Ambient Mass-Spectrometric Data Based on Cross-Correlation

Ambient mass spectrometry is a powerful approach for rapid, high-throughput, and direct sample analysis. Due to the open-air desorption and ionization processes, random fluctuations of ambient conditions can lead to large variances in mass-spectral signals over time. The mass-spectral data also can be further complicated due to multiple analytes present in the sample, background-ion signals stemming from the desorption/ionization source itself, and other laboratory-specific conditions (e.g., ambient laboratory air, nearby hardware). Thus, background removal and analyte-ion recognition can be quite difficult, particularly in non-targeted analyses. Here, we demonstrate the use of a cross-correlation-based approach to exploit chemical information encoded in the time domain to group/categorize mass-spectral peaks from a single analysis dataset. Ions that originate from ambient (or other) background species were readily flagged and removed from spectra; the result was a decrease in mass-spectral complexity by over 70% due to the removal of these background ions. Meanwhile, analyte ions were differentiated and categorized based on their time-domain profiles. With sufficient mass resolving-power and mass-spectral acquisition rate, isolated mass spectra containing ions from the same species in a sample could be extracted, leading to a reduction in mass-spectral complexity by more than 98% in some cases. The cross-correlation approach was tested with different ionization sources as well as reproducible and irreproducible sample introduction. Software built in-house enabled fully automated data processing, which can be performed within a few seconds. Ultimately, this approach provides an additional dimension of analyte separation in ambient mass-spectrometric analyses with information that is already recorded throughout the analysis. .

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Self-Supplied Liquid Injection Field Desorption/Ionization Ion Source for an Orthogonal Time-of-Flight Instrument

A new implementation of a dedicated ion source for field ionization (FI), field desorption (FD), and liquid injection field desorption/ionization (LIFDI) for the JEOL AccuTOF GC series of orthogonal-acceleration time-of-flight instruments is presented. In contrast to existing implementations, this third-party LIFDI probe and source combination does not require the exchange of the entire ion source comprising ion source block and lens stack to switch from electron ionization (EI) to LIFDI. Rather, the methods may be swapped conveniently by only exchanging the ion source block for a mechanical probe guide and inserting the LIFDI probe in place of the standard direct insertion probe (DIP) via the vacuum lock. Further, this LIFDI setup does not require any changes of the electronics or software of the AccuTOF mass spectrometer because it is self-supplied in terms of power supply, observation optics, and computer control. The setup offers advanced FI/FD/LIFDI control features such as emission-controlled emitter heating current and emitter flash baking during elongated runs as required for gas chromatography-FI-mass spectrometry (MS). The LIFDI source and probe and its operation are reported in detail. FI spectra of the volatile analytes toluene, heptane, and pentafluoroiodobenzene are presented. LIFDI operation is demonstrated for the analysis of the saturated hydrocarbon dotriacontane and the low-mass hydrocarbon polymers polystyrene 484 and polystyrene 1050. Further, the air-sensitive 2nd-generation Hoveyda–Grubbs catalyst is analyzed by LIFDI-MS. For comparison with long-established LIFDI instrumentation, some of the spectra obtained with the new setup are also compared with those from a double-focusing magnetic sector instrument. .

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Deuterium trapping mechanisms in reduced activation ferritic martensitic steels and their correlation with mechanical strengthening

Development of high-strength materials often involves introduction of additional strengthening microstructures that also serve as tritium trapping sites. Such additions in fusion material development could degrade the fuel efficiency in fusion reactors and raise radiological concerns. The contribution of individual microstructure features in hydrogen trapping must be evaluated to ensure fuel efficiency and radiological safety. This study explores the mechanistic origins of deuterium trapping in reduced-activation ferritic–martensitic steels and its correlation to mechanical strengthening. A series of model alloys and engineering steels were fabricated and subjected to different heat treatments to control deuterium trapping site density. Deuterium retention was evaluated using D 2 gas charging and thermal desorption spectroscopy, focusing on the role of grain boundary, dislocation, M 23 C 6 precipitates, and TiC precipitates. Multiscale microstructure characterization and synchrotron X-ray diffraction were performed to characterize microstructure, which was correlated to the deuterium retention property. Results show that TiC precipitates exhibit the highest deuterium trapping capacity, followed by M 23 C 6 precipitates. Dislocation and grain boundary demonstrate the lowest and similar efficiencies. Furthermore, the relationship of trapping quantity and mechanical strengthening of these microstructure features was quantified, demonstrating that TiC precipitates offer highest deuterium trapping per unit of mechanical strengthening.

Retention↗

On the various Cu-redox pathways and O 2 -mediated Bronsted-to-Lewis adsorbed-NH 3 redistribution under SCR half-cycle conditions

The Standard SCR reaction on Cu-SSZ-13 is a complex redox process facilitated by a reduction half cycle (RHC) and an oxidation half cycle (OHC). It is generally accepted that RHC requires the simultaneous presence of NO and NH 3 , while OHC requires both NO and O 2 ; however understanding of how these individual reactants impact the Cu redox cycle is limited. In this work, we provide experimental investigation of NO-only, NH 3 -only and NO+NH 3 RHC, and their relative rates. Simple kinetic models were developed to understand the dependance of NO-only and NH 3 -only RHC on Cu speciation. Various OHC routes including NO+O 2 and O 2 -only OHC, and a previously unreported H 2 O-mediated OHC pathway were also investigated. Detailed NH 3 temperature-programmed desorption studies showed that RHC selectively consumes NH 3 adsorbed on Lewis-acid sites, and that part of the remaining Bronsted-bound NH 3 moves to the Lewis-acid sites during subsequent OHC, thereby resulting in a repartitioning of adsorbed NH 3 .

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Machine learning prediction and experimental verification of Pt-modified nitride catalysts for ethanol reforming with reduced precious metal loading

Ethanol is the smallest molecule containing C–O, C–C, C–H, and O–H bonds present in biomass-derived oxygenates. The development of inexpensive and selective catalysts for ethanol reforming is important towards the renewable generation of hydrogen from biomass. Transition metal nitrides (TMN) are interesting catalyst support materials that can effectively reduce precious metal loading for the catalysis of ethanol and other oxygenates. Herein theoretical and experimental methods were used to probe platinum-modified molybdenum nitride (Pt/Mo 2 N) surfaces for ethanol reforming. Computations using density-functional theory and machine learning predicted monolayer Pt/Mo 2 N to be highly active and selective for ethanol reforming. Temperature-programmed desorption (TPD) experiments verified that ethanol primarily underwent decomposition on Mo 2 N, and the reaction pathway shifted to reforming on Pt/Mo 2 N surfaces. Additionally, high-resolution electron energy loss spectroscopy (HREELS) results further indicated that while Mo2N decomposed the ethoxy intermediate by cleaving C–C, C–O, and C–H bonds, Pt-modification preserved the C–O bond, resulting in ethanol reforming.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Crystal structures of human group-VIIA phospholipase A2 inhibited by organophosphorus nerve agents exhibit non-aged complexes

The enzyme group-VIIA phospholipase A2 (gVIIA-PLA2) is bound to lipoproteins in human blood and hydrolyzes the ester bond at the sn-2 position of phospholipid substrates with a short sn-2 chain. The enzyme belongs to a serine hydrolase superfamily of enzymes, which react with organophosphorus (OP) nerve agents. OPs ultimately exert their toxicity by inhibiting human acetycholinesterase at nerve synapses, but may additionally have detrimental effects through inhibition of other serine hydrolases. We have solved the crystal structures of gVIIA-PLA2 following inhibition with the OPs diisopropylfluorophosphate, sarin, soman and tabun. The sarin and soman complexes displayed a racemic mix of P{sub R} and P{sub S} stereoisomers at the P-chiral center. The tabun complex displayed only the P{sub R} stereoisomer in the crystal. In all cases, the crystal structures contained intact OP adducts that had not aged. Aging refers to a secondary process OP complexes can go through, which dealkylates the nerve agent adduct and results in a form that is highly resistant to either spontaneous or oxime-mediated reactivation. Non-aged OP complexes of the enzyme were corroborated by trypsin digest and matrix-assisted laser desorption ionization mass spectrometry of OP-enzyme complexes. The lack of stereoselectivity of sarin reaction was confirmed by gas chromatography/mass spectrometry using a chiral column to separate and quantitate the unbound stereoisomers of sarin following incubation with enzyme. The structural details and characterization of nascent reactivity of several toxic nerve agents is discussed with a long-term goal of developing gVIIA-PLA2 as a catalytic bioscavenger of OP nerve agents.

36 MATERIALS SCIENCE↗

Atypical Hydrogen Uptake on Chemically Activated, Ultramicroporous Carbon

Hydrogen adsorption at near-ambient temperatures on ultramicroporous carbon (UMC), derived through secondary chemical activation from a wood-based activated carbon was studied using volumetric and gravimetric methods. The results showed that physisorption is accompanied by a process of different nature that causes slow uptake at high pressures and hysteresis on desorption. In combination, this results in unusually high levels of hydrogen uptake at near-ambient temperatures and pressures (e.g. up to 0.8 wt % at 25 oC and 2 MPa). The heat of adsorption corresponding to the slow process leading to high uptake (17 20 kJ/mol) is higher than usually reported for carbon materials, but the adsorption kinetics is slow, and the isotherms exhibit pronounced hysteresis. These unusual properties were attributed to contributions from polarization-enhanced physisorption caused by traces of alkali metals residual from chemical activation. The results support the hypothesis that polarization-induced physisorption in high surface area carbons modified with traces of alkali metal ions is an alternate route for increasing the hydrogen storage capacity of carbon adsorbents.

08 HYDROGEN↗

Kinetic effect of Pd additions on the hydrogen uptake of chemically activated, ultramicroporous carbon

The effect of mixing chemically-activated ultramicroporous carbon (UMC) with Pd nanopowder is investigated. Results show that Pd addition doubles the rate of hydrogen uptake, but does not enhance the hydrogen capacity or improve desorption kinetics. The effect of Pd on the rate of hydrogen adsorption supports the occurrence of the hydrogen spillover mechanism in the Pd - UMC system.

08 HYDROGEN↗

NO2 uptake under practically relevant conditions on BaO/Pt(111)

The formation of nitrites and nitrates (Ba(NOx)2) under practically relevant conditions (PNO2 up to 1.0 Torr and T = 500 K) and their thermal decomposition on BaO (>20 monolayer equivalent (MLE))/Pt(1 1 1) were studied using temperature programmed desorption (TPD), infrared reflection absorption (IRA), and Xray photoelectron (XP) spectroscopies. The exposure of BaO to 1.0 × 10-8 Torr NO2 at 500 K leads to the formation of a Ba(NOx)2 layer with small, disordered crystalline nitrate clusters. Under these conditions (PNO2 = 1.0 × 10-8 Torr and T = 500 K) only the top portion of the BaO layer converts to Ba(NOx)2 and the nitrites in this Ba(NOx)2 layer stay without converting completely to nitrates even after 100 min of NO2 exposure. In the thermal decomposition of Ba(NOx)2, first nitrites decompose, releasing NO and then the decomposition of nitrates occurs via two pathways releasing NO2 and NO + O2. At 500 K and PNO2 ≥ 1.0 × 10-7 Torr, first NO2 reacts with BaO to form small disordered crystalline Ba(NO3)2 particles and then these particles agglomerate to form large, well-ordered (bulk-like) crystalline nitrates as the NO2 exposure increases. The thermal decomposition of these well-ordered, bulk-like crystalline nitrate aggregates occurs in two steps releasing NO2 and NO + O2 in each step in two different temperature regions. NO2 pressure ≥1.0 × 10-5 Torr is required for the complete oxidation of initially formed nitrites to nitrates and the full nitration of the BaO layer at 500 K sample temperature. We gratefully acknowledge the US Department of Energy (DOE), Office of Basic Energy Sciences, Division of Chemical Sciences for the support of this work. The research described in this paper was performed at the Environmental Molecular Sciences Laboratory (EMSL), a national scientific user facility sponsored by the DOE Office of Biological and Environmental Research and located at Pacific Northwest National Laboratory (PNNL). PNNL is operated for the US DOE by Battelle Memorial Institute under contract number DE-AC05-76RL01830.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Lattice Boltzmann simulations of the permeability and capillary adsorption of cement model microstructures

The lattice Boltzmann method is used to investigate the permeability of microstructures of cement pastes generated using the numerical models CEMHYD3D (Bentz, 1997) and {mu}IC (Bishnoi and Scrivener, 2009). Results are reported as a function of paste water-to-cement ratio and degree of hydration. The permeability decreases with increasing hydration and decreasing water-to-cement ratio in agreement with experiment. However the permeability is larger than the experimental data recorded using beam bending methods (Vichit-Vadakan and Scherer, 2002). Notwithstanding, the lattice Boltzmann results compare favourably with alternate numerical methods of permeability calculation for cement model microstructures. In addition, we show early results for the liquid/vapour capillary adsorption and desorption isotherms in the same model {mu}IC structures. The broad features of the experimental capillary porosity isotherm are reproduced, although further work is required to adequately parameterise the model.

36 MATERIALS SCIENCE↗

Internal curing with lightweight aggregate produced from biomass-derived waste

Shrinkage of concrete may lead to cracking and ultimately to a reduction of the service life of concrete structures. Among known methods for shrinkage mitigation, internal curing with porous aggregates was successfully utilized in the last couple of decades for decreasing autogenous and drying shrinkage. In this paper, the internal curing performance of pre-saturated lightweight aggregates produced from biomass-derived waste (bio-LWA) was studied. In the first part of this paper, the microstructure of the bio-LWA is investigated, with special focus on their pore structure and on their water absorption and desorption behavior. The bio-LWA has large porosity and coarse pore structure, which allows them to release the entrained water at early age and counteract self-desiccation and autogenous shrinkage. In the second part, the efficiency of internal curing in mortars incorporating the bio-LWA is examined by neutron tomography, internal relative humidity and autogenous deformation measurements.

36 MATERIALS SCIENCE↗

Impact of water activity on the stability of ettringite

The stability of ettringite as function of temperature and water vapour pressure was studied on synthetic samples using X-ray diffraction, thermogravimetric analysis, sorption balance measurements and different calorimetry techniques. Crystalline ettringite has a water content per mol of Al{sub 2}O{sub 3}, n, varying from 30 to 32 H{sub 2}O, while the amorphous product formed on drying it, metaettringite, has only 9 to 13 H{sub 2}O. Very large hysteresis was observed during the desorption and absorption cycles. The total enthalpy values associated with the decomposition and reformation of ettringite were consistent and similar. During rehydration, different absorption stages were identified and quantified with sorption calorimetry. Due to the hysteresis it was not possible to model the absorption/desorption behaviour using the enthalpies determined by calorimetry, so the values calculated with the van't Hoff equation were used. The area of performance of ettringite-based systems recommended in this work has been extended compared to previously reported data.

36 MATERIALS SCIENCE↗

Prediction of water vapour sorption isotherms and microstructure of hardened Portland cement pastes

Water vapour sorption isotherms of cementitious materials reflect the multi-scale physical microstructure through its interaction with moisture. Our ability to understand and predict adsorption and desorption behaviour is essential in the application of modern performance-based approaches to durability analysis, along with many other areas of hygro-mechanical and hygro-chemo-mechanical behaviour. In this paper, a new physically based model for predicting water vapour sorption isotherms of arbitrary hardened Portland cement pastes is presented. Established thermodynamic principles, applied to a microstructure model that develops with hydration, provide a rational basis for predictions. Closed-form differentiable equations, along with a rational consideration of hysteresis and scanning phenomena, makes the model suitable for use in numerical moisture simulations. The microstructure model is reconciled with recently published {sup 1}H NMR and mercury intrusion porosimetry results.

36 MATERIALS SCIENCE↗

Shape effect on drying behavior of cement-based materials: Mechanisms and numerical analysis

The shape of the specimen or structure has a direct impact on the behavior of drying concrete. This effect is not taken into account in most of shrinkage models and codes. Only the current B4 model and its previous version B3 model incorporate a shape factor. The determination of this coefficient is based on the nonlinear moisture diffusion analysis, which can explain the shape effect on the shrinkage rate. However, the model integrates this coefficient in the ultimate shrinkage values as well. An experimental study has been performed to confirm and understand this behavior. The mass loss and drying shrinkage of cylinders showed higher rate and ultimate values than the prisms, for the same effective cross section thickness. To explain this result, the drying, the differential shrinkage, the internal stress and the damaged depth were determined for both shapes through numerical modeling. The main input data of the model were the measured mass loss and shrinkage. The calculated desorption isotherm curve of the cylinder was below that of the prism, which is consistent with its higher ultimate mass-loss. The determination of stress profiles indicates slower stress mitigation for the cylinder. The cylinder develops a larger relative damaged area, defined as the part of the specimen where cracking is likely to occur due to tensile stresses. The results actually show that differential shrinkage between the edge and the core is more pronounced for the cylinder and decreases with time.

36 MATERIALS SCIENCE↗

Role of alcohol-ethylene oxide polymers on the reduction of shrinkage of cement paste

Concrete drying shrinkage is a major practical problem, but it can be ameliorated by means of ''shrinkage-reducing agents'' (SRAs). Water vapor sorption isotherms and low temperature DSC measurements suggest that alcohol-ethylene oxide polymers (AEOPs) with a better hydrophilic-lipophilic (HL-) balance are present in meso-pores in which water molecules evaporate from 75% RH to 40% RH. Short-term drying shrinkage measurements show that the better HL-balanced AEOPs reduce irreversible shrinkage, which occurs mainly from 75% RH to 40% RH during the first drying. Based on the similarity between corresponding RH regions, it is concluded that the better HL balanced AEOP in relevant meso-pores hinders agglomeration of C-S-H during the first desorption to mitigate the irreversible shrinkage and reduce the first drying shrinkage.

36 MATERIALS SCIENCE↗

Hinderance of C-S-H sheet piling during first drying using a shrinkage reducing agent: A SAXS study

The role of a shrinkage reducing agent (SRA) in the hardened cement paste during a first desorption process was investigated by measuring the small-angle X-ray scattering (SAXS). Fractal disc analysis and Guinier approximation were adopted to interpret the SAXS profiles. We experimentally confirmed that the presence of SRA molecules mitigated the piling of calcium-silicate hydrate (C-S-H) sheets, which could be monitored by the increase in the thickness of the disc, representing the agglomeration of C-S-H sheets. In addition, the basal spacing of C-S-H did not change during the drying. By contrast, the diameter of the discs monotonically decreased and showed a similar trend to that of samples lacking SRA. Based on these findings, we concluded that SRA molecules were on the surface of the C-S-H sheets and mitigated the piling, facilitating water removal from the C-S-H agglomeration in the RH range of 80–40%.

36 MATERIALS SCIENCE↗

Mechanisms of internal curing water release from retentive and non-retentive superabsorbent polymers in cement paste

This paper examines the mechanisms of desorption within cement pastes for superabsorbent polymers (SAP) with different sorption kinetics: retentive and non-retentive (self-releasing). Despite the different behavior in solution, both SAP types mitigated the autogenous shrinkage of cement pastes. {sup 1}H NMR and X-ray tomography showed that the cavities formed by both SAP types were saturated until 9–11 h after mixing, while the entrained water in the cavities redistributed to the cement matrix afterwards. In particular, the non-retentive SAP might have rapidly released the absorbed water, but the released water stayed in the original cavities. Therefore, the behavior of the SAP in the pore solution may not completely determine their internal curing performance in cement pastes. In particular, the initial absorption that forms the solution-filled cavities might be more important than whether the SAP are able to retain the solution for extended periods of time or not.

36 MATERIALS SCIENCE↗