Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “corrected data”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,279 records · Page 71

Techniques in Assessing Random Uncertainty of Wind Tunnel Replicate Test Data

The preferred method to determine the random uncertainty of variables of interest during wind tunnel tests is by direct analysis of replicate data. However, current information is limited to analysis of a single replicate set condition that does not consider data covariance. This paper provides additional information on considerations for quantifying random uncertainty including the evaluation and correction of replicate data covariance, the selection of replicate set conditions for the test, and the interpolation of random uncertainty at other than replicate set conditions. The analysis and techniques are supported by data from a conventional aircraft configuration test at the Oran Nicks Low-Speed Wind Tunnel and an ASME nozzle flow characterization at the Propulsion Systems Laboratory.

Uncertainty↗

Corrective Action Decision Document/Closure Report for Corrective Action Unit 482: Area 15 U15a/e Muckpiles and Ponds Nevada Test Site

This Corrective Action Decision Document /Closure Report (CADD/CR) was prepared by the Defense Threat Reduction Agency (DTRA) for Corrective Action Unit (CAU) 482 U15a/e Muckpiles and Ponds. This CADD/CR is consistent with the requirements of the Federal Facility Agreement and Consent Order agreed to by the State of Nevada, the U.S. Department of Energy, and the U.S. Department of Defense. Corrective Action Unit 482 is comprised of three Corrective Action Sites (CASs) and one adjacent area: CAS 15-06-01, U15e Muckpile; CAS 15-06-02, U15a Muckpile; CAS 15-38-01, Area 15 U15a/e Ponds; and Drainage below the U15a Muckpile. The purpose of this CADD/CR is to provide justification and documentation supporting the recommendation for closure with no further corrective action, by placing use restrictions on the three CASs and the adjacent area of CAU 482. To support this recommendation, a corrective action investigation (CAI) was performed in September 2002. The purpose of the CAI was to fulfill the following data needs as defined during the Data Quality Objective (DQO) process: (1) Determine whether contaminants of concern (COCs) are present. (2) If COCs are present, determine their nature and extent. (3) Provide sufficient information and data to determine appropriate corrective actions. The CAU 482 dataset from the CAI was evaluated based on the data quality indicator parameters. This evaluation demonstrated the quality and acceptability of the dataset for use in fulfilling the DQO data needs. Analytes detected during the CAI were evaluated against final action levels (FALs) established in this document. Tier 2 FALS were determined for the hazardous constituents of total petroleum hydrocarbons (TPH)-diesel-range organics (DRO) and the radionuclides americium (Am)-241, cesium (Cs)-137, plutonium (Pu)-238, and Pu-239. The Tier 2 FALs were calculated for the radionuclides using site-specific information. The hazardous constituents of TPH-DRO were compared to the PALs defined in the CAIP, and because none of the preliminary action levels (PALs) were exceeded, the PALs became the FALs. The radionuclide FALs were calculated using the Residual Radioactive (RESRAD) code (version 6.21). The RESRAD calculation determined the activities of all radionuclides that together would sum to an exposure dose of 25 millirem per year to a site receptor (based on their relative abundances at each CAS). Based on the field investigation, the following contaminants were determined to be present at concentrations exceeding their corresponding FALs: (1) CAS 15-06-01 - None. (2) CAS 15-06-02 - Cs-137 and Pu-239. (3) CAS 15-38-01 - Am-241, Cs-137, Pu-238, and Pu-239. (4) Drainage below CAS 15-06-02 - Cs-137 and Pu-239. Based on the data and risk evaluations, the DQO data needs presented in the Corrective Action Investigation Plan were met, and the data accurately represent the radiological and chemical risk present at CAU 482. Based on the results of the CAI data evaluation, it was determined that closure in place with use restrictions is the appropriate corrective action for CAU 482 and that use restrictions will effectively control exposure to future land users. This is based on the fact that even though the FALs were exceeded in a few samples, this remote, controlled access site poses only limited risk overall to public health and the environment. Given the relatively low levels of contamination present, it would create a greater hazard to worker safety, public health, and the environment to remove the contamination, transport it, and bury it at another location. Therefore, DTRA provides the following recommendations: (1) Close COCs in place at CAS 15-06-02, CAS 15-38-01, and the drainage below CAS 15-06-02 with use restrictions. (2) No further action for CAU 482. (3) A Notice of Completion be issued to DTRA by the Nevada Division of Environmental Protection for closure of CAU 482. (4) Move CAU 482 from Appendix III to Appendix IV of the Federal Facility Agreement and Consent Order.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Air quality and health impacts of the 2020 wildfires in California

Abstract Background Wildfires in 2020 ravaged California to set the annual record of area burned to date. Clusters of wildfires in Northern California surrounded the Bay Area covering the skies with smoke and raising the air pollutant concentrations to hazardous levels. This study uses the Fire Inventory from the National Center for Atmospheric Research database and the Community Multiscale Air Quality model to estimate the effects of wildfire emissions on air quality during the period from August 16 to October 28 of 2020. In addition, low-cost sensor data for fine particulate matter (PM 2.5 ) from the PurpleAir network is used to enhance modeled PM 2.5 concentrations. The resulting impacts on ozone and PM 2.5 are used to quantify the health impacts caused by wildfires using the Benefits Mapping and Analysis Program – Community Edition. Results Wildfire activity significantly increased direct PM 2.5 emissions and emissions of PM 2.5 and ozone precursors. Direct PM 2.5 emissions surged up to 38 times compared to an average day. Modeling results indicated that wildfires alone led to a rise in ozone daily maximum 8-h average by up to 10 ppb and exceeded PM 2.5 air quality standards in numerous locations by up to 10 times. While modeled PM 2.5 concentrations were lower than measurements, correcting these with PurpleAir data improved the accuracy. The correction using PurpleAir data increased estimates of wildfire-induced mortality due to PM 2.5 exposure by up to 16%. Conclusions The increased hospital admissions and premature mortality attributed to wildfires were found to be comparable to the health impacts avoided by strategies aimed at meeting ozone and PM2.5 air quality standards. This suggests that widespread wildfire emissions can negate years of efforts dedicated to controlling air pollution. The integration of low-cost sensor data proved invaluable in refining the estimates of health impacts from PM2.5 resulting from wildfires.

54 ENVIRONMENTAL SCIENCES↗

Data-Driven Machine Learning for Wind Plant Flow Modeling

In this study, we introduce a data-driven machine learning framework for improving the accuracy of wind plant flow models by learning turbulence model corrections based on data from higher-fidelity simulations. First, a high-dimensional PDE-constrained optimization problem is solved using gradient-based optimization with adjoints to determine optimal eddy viscosity fields that improve the agreement of a medium-fidelity Reynolds-Averaged Navier Stokes (RANS) model with large eddy simulations (LES). A supervised learning problem is then constructed to find general, predictive representations of the optimal turbulence closure. A machine learning technique using Gaussian process regression is trained to predict the eddy viscosity field based on local RANS flow field information like velocities, pressures, and their gradients. The Gaussian process is trained on LES simulations of a single turbine and implemented in a wind plant simulation with 36 turbines. We show improvement over the baseline RANS model with the machine learning correction, and demonstrate the ability to provide accurate confidence levels for the corrections that enable future uncertainty quantification studies.

17 WIND ENERGY↗

Comparing range data across the slow-time dimension to correct motion measurement errors beyond the range resolution of a synthetic aperture radar

Motion measurement errors that extend beyond the range resolution of a synthetic aperture radar (SAR) can be corrected by effectively decreasing the range resolution of the SAR in order to permit measurement of the error. Range profiles can be compared across the slow-time dimension of the input data in order to estimate the error. Once the error has been determined, appropriate frequency and phase correction can be applied to the uncompressed input data, after which range and azimuth compression can be performed to produce a desired SAR image.

Doerry, Armin W↗

Thermodynamics and structure of a two-dimensional electrolyte by integral equation theory

Monte Carlo simulations and integral equation theory were used to predict the thermodynamics and structure of a two-dimensional Coulomb fluid. We checked the possibility that integral equations reproduce Kosterlitz-Thouless and vapor-liquid phase transitions of the electrolyte and critical points. Integral equation theory results were compared to Monte Carlo data and the correctness of selected closure relations was assessed. Among selected closures hypernetted-chain approximation results matched computer simulation data best, but these equations unfortunately break down at temperatures well above the Kosterlitz-Thouless transition. The Kovalenko-Hirata closure produces results even at very low temperatures and densities, but no sign of phase transition was detected.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Replacing missing data between airborne SAR coherent image pairs

For synthetic aperture radar systems, missing data samples can cause severe image distortion. When multiple, coherent data collections exist and the missing data samples do not overlap between collections, there exists the possibility of replacing data samples between collections. For airborne radar, the known and unknown motion of the aircraft prevents direct data sample replacement to repair image features. Finally, this paper presents a method to calculate the necessary phase corrections to enable data sample replacement using only the collected radar data.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

LANDSAT-4 Science Characterization Early Results. Volume 4: Applications

The excellent quality of TM data allows researchers to proceed directly with applications analyses, without spending a significant amount of time applying various corrections to the data. The early results derived of TM data are discussed for the following applications: agriculture, land cover/land use, soils, geology, hydrology, wetlands biomass, water quality, and snow.

Barker, J. L.↗

Ares I-X Range Safety Simulation Verification and Analysis IV and V

NASA s ARES I-X vehicle launched on a suborbital test flight from the Eastern Range in Florida on October 28, 2009. NASA generated a Range Safety (RS) flight data package to meet the RS trajectory data requirements defined in the Air Force Space Command Manual 91-710. Some products included in the flight data package were a nominal ascent trajectory, ascent flight envelope trajectories, and malfunction turn trajectories. These data are used by the Air Force s 45th Space Wing (45SW) to ensure Eastern Range public safety and to make flight termination decisions on launch day. Due to the criticality of the RS data in regards to public safety and mission success, an independent validation and verification (IV&V) effort was undertaken to accompany the data generation analyses to ensure utmost data quality and correct adherence to requirements. Multiple NASA centers and contractor organizations were assigned specific products to IV&V. The data generation and IV&V work was coordinated through the Launch Constellation Range Safety Panel s Trajectory Working Group, which included members from the prime and IV&V organizations as well as the 45SW. As a result of the IV&V efforts, the RS product package was delivered with confidence that two independent organizations using separate simulation software generated data to meet the range requirements and yielded similar results. This document captures ARES I-X RS product IV&V analysis, including the methodology used to verify inputs, simulation, and output data for an RS product. Additionally a discussion of lessons learned is presented to capture advantages and disadvantages to the IV&V processes used.

Tarpley, Ashley↗

Satellite Estimation of Fractional Cover in Several California Specialty Crops

Past research in California and elsewhere has revealed strong relationships between satellite NDVI, photosynthetically active vegetation fraction (Fc), and crop evapotranspiration (ETc). Estimation of ETc can support efficiency of irrigation practice, which enhances water security and may mitigate nitrate leaching. The U.C. Cooperative Extension previously developed the CropManage (CM) web application for evaluation of crop water requirement and irrigation scheduling for several high-value specialty crops. CM currently uses empirical equations to predict daily Fc as a function of crop type, planting date and expected harvest date. The Fc prediction is transformed to fraction of reference ET and combined with reference data from the California Irrigation Management Information System to estimate daily ETc. In the current study, atmospherically-corrected Landsat NDVI data were compared with in-situ Fc estimates on several crops in the Salinas Valley during 2011-2014. The satellite data were observed on day of ground collection or were linearly interpolated across no more than an 8-day revisit period. Results will be presented for lettuce, spinach, celery, broccoli, cauliflower, cabbage, peppers, and strawberry. An application programming interface (API) allows CM and other clients to automatically retrieve NDVI and associated data from NASA's Satellite Irrigation Management Support (SIMS) web service. The SIMS API allows for queries both by individual points or user-defined polygons, and provides data for individual days or annual timeseries. Updates to the CM web app will convert these NDVI data to Fc on a crop-specific basis. The satellite observations are expected to play a support role in Salinas Valley, and may eventually serve as a primary data source as CM is extended to crop systems or regions where Fc is less predictable.

satellite↗

Measured Long-Term Solar Irradiance for Climate Studies

Solar radiation is primarily measured using high-quality radiometers (e.g., pyranometers and pyrheliometers). These instruments need to be calibrated regularly (every two years at a minimum). They are also susceptible to various sources of uncertainties. Therefore, rigorous data quality assessment is required to obtain high-confidence data from these radiometers. This is especially true when the data is used to understand climatic trends and/or extreme weather events. In this study, we attempted to create a continuous and reliable dataset by correcting the underlying data which we believe contains bias due to reference pyranometers swap procedures. These biases can be significant which can be up to two percentage points thereby influencing the interpretation of climate changes and/or extreme events. This study elaborates on the biases and methods to correct those biases.

data integrity↗

Observation-Corrected Precipitation Estimates in GEOS-5

Several GEOS-5 applications, including the GEOS-5 seasonal forecasting system and the MERRA-Land data product, rely on global precipitation data that have been corrected with satellite and or gauge-based precipitation observations. This document describes the methodology used to generate the corrected precipitation estimates and their use in GEOS-5 applications. The corrected precipitation estimates are derived by disaggregating publicly available, observationally based, global precipitation products from daily or pentad totals to hourly accumulations using background precipitation estimates from the GEOS-5 atmospheric data assimilation system. Depending on the specific combination of the observational precipitation product and the GEOS-5 background estimates, the observational product may also be downscaled in space. The resulting corrected precipitation data product is at the finer temporal and spatial resolution of the GEOS-5 background and matches the observed precipitation at the coarser scale of the observational product, separately for each day (or pentad) and each grid cell.

Data Assimilation↗

Corrections for the polarization-dependent efficiency and new neutron-proton analyzing power data at 7.6 MeV

We present new corrections for the polarization-dependent efficiency (PDE), which introduces a false asymmetry into measurements of n-p analyzing power A{sub y}({theta}) caused by double scattering in the neutron side detectors. To accomplish this, we created a new database of {sup 12}C(n-vector,n) A{sub y}({theta}) by using a combination of fits to data, phase-shift analysis, and R-matrix analysis. Our recorrection for PDE of previously reported n-p A{sub y}({theta}) data at 7.6 and 12.0 MeV and new data at 7.6 MeV indicate that we have achieved a superior representation of {sup 12}C(n-vector,n). Our results continue to suggest a possible charge dependence of the pion-nucleon coupling constant.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Dataset for manuscript "Equipartition and the temperature of maximum density of TIP4P/2005 water"

We simulate TIP4P/2005 water in the temperature range of 257 K to 318 K with time-steps 0.25, 0.50, 1.00, 2.00, and 4.00 fs. The density-temperature behavior obtained using 0.25 or 0.50 fs are in excellent agreement with each other but differ from those obtained using time-steps that have been shown earlier to lead to a breakdown of equipartition. The temperature of maximum density (TMD) is 277.15 K with time-step 0.25 or 0.50 fs, but is shifted to progressively lower values for longer time-steps, a trend that holds for different thermostat/barostat combinations. Enhancing the water-water dispersion interaction, as has been recommended for simulating disordered proteins in TIP4P/2005, degrades the description of the liquid-vapor phase envelope. We present a simple physically transparent reasoning to highlight the separation of the time-scales between translational and rotational motion. We also develop a metric, Chi, that we term the equipartition anomaly, to detect equipartition violations in simulations that include molecules that are treated as rigid objects. Calculating Chi is shown to be straightforward and sensitive to equipartition violations. A key takeaway from this study is that using sufficiently short time-steps (less than or equal to 0.5 fs) to preserve equipartition is essential for obtaining meaningful liquid water properties and for producing reliable simulation data, as correct-ensemble sampling is fundamental to ensure reproducibility across codes and simulation alogrithms. The included dataset provides the raw data used in the preparation of the graphs noted in the manuscript.

36 MATERIALS SCIENCE↗

Compilation of Experimental Yield Data for Spontaneous Fission of 252 Cf

We present a comprehensive compilation and curation of experimental fission yield (FY) data for the spontaneous fission of 252 Cf, extracted from the EXFOR database. The compilation follows a structured methodology developed for prior compilations of neutron-induced fission yields, and incorporates both independent (IFY) and cumulative (CFY) yields. A total of 62 datasets were reviewed, with entries spanning from 1955 to 2021. A significant portion of the literature reports pre-neutron emission yields, which were excluded from the present compilation due to limitations in format compatibility. Each accepted dataset was processed into a standardized JSON format, including metadata, uncertainties, and bibliographic references. Where available, decay radiation information was used to update the FY data using the latest ENSDF evaluations; 237 data points were corrected accordingly. These corrections are fully traceable and preserve original values. The result is a curated dataset suitable for use in nuclear data evaluations. This work is part of an ongoing effort to modernize the handling of FY data and provide evaluators with high-quality, machine-readable experimental inputs

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Closure Report for Corrective Action Unit 572: Test Cell C Ancillary Building and Structures, Nevada National Security Site, Nevada, Revision 0

The purpose of this CR is to provide documentation supporting the completed corrective actions and data confirming that the closure objectives for CAU 572 were met. To achieve this, the following actions were performed: • Corrective action investigation (CAI) activities were performed from August 2020 through May 2023, as set forth in the SAFER Plan for CAU 572; and in accordance with the Soils Activity Quality Assurance Plan, which establishes requirements, technical planning, and general quality practices. • Corrective actions were completed during decontamination and demolition (D&D) and disposal activities, and were performed from August 2022 through September 2025.

54 ENVIRONMENTAL SCIENCES↗

Effect of ice contamination of liquid-nitrogen drops in film boiling

Previously reported vaporization time data of liquid nitrogen drops in film boiling on a flat plate are about 30 percent shorter than predicted from standard laminar film boiling theory. This theory, however, had been found to successfully correlate the data for conventional fluids such as water, ethanol, benzene, or carbon tetrachloride. Experimental evidence that some of the discrepancy for cryogenic fluids results from ice contamination due to condensation is presented. The data indicate a fairly linear decrease in droplet evaporation time with the diameter of the ice crystal residue. After correcting the raw data for ice contamination along with convection, a comparison of theory with experiment shows good agreement.

Schoessow, G. J.↗