Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “core sampling”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,279 records · Page 71

UT-GOM2-1 Hydrate Pressure Coring Expedition: Chapter 3. Hole GC 955 H002

This report describes the operations, sample collection and handling, initial analyses, and preliminary interpretations developed by the UT-GOM2-1 Science Party for Hole GC 955 H002 (H002). This chapter describes the results of H002 pressure coring, physical property analysis, quantitative degassing, lithostratigraphic analysis, geochemical analysis, and wireline logging. All methods are described in Chapter 2 Expedition Methods.

03 NATURAL GAS↗

The Global Precipitation Mission

The Global Precipitation Mission (GPM), expected to begin around 2006, is a follow-up to the Tropical Rainfall Measuring Mission (TRMM). Unlike TRMM, which primarily samples the tropics, GPM will sample both the tropics and mid-latitudes. The primary, or core, satellite will be a single, enhanced TRMM satellite that can quantify the 3-D spatial distributions of precipitation and its associated latent heat release. The core satellite will be complemented by a constellation of very small and inexpensive drones with passive microwave instruments that will sample the rainfall with sufficient frequency to be not only of climate interest, but also have local, short-term impacts by providing global rainfall coverage at approx. 3 h intervals. The data is expected to have substantial impact upon quantitative precipitation estimation/forecasting and data assimilation into global and mesoscale numerical models. Based upon previous studies of rainfall data assimilation, GPM is expected to lead to significant improvements in forecasts of extratropical and tropical cyclones. For example, GPM rainfall data can provide improved initialization of frontal systems over the Pacific and Atlantic Oceans. The purpose of this talk is to provide information about GPM to the USWRP (U.S. Weather Research Program) community and to discuss impacts on quantitative precipitation estimation/forecasting and data assimilation.

Braun, Scott↗

A Geomagnetic Estimate of Mean Paleointensity

To test a statistical hypothesis about Earth's magnetic field against paleomagnetism, the present field is used to estimate time averaged paleointensity. The estimate uses the modem magnetic multipole spectrum R(n), which gives the mean square induction represented by spherical harmonics of degree n averaged over the sphere of radius a = 6371.2 km. The hypothesis asserts that the low degree multipole powers of the core-source field are distributed as chi-squared with 2n+l degrees of freedom and expectation values {R(n)} = K[(n+l/2)/n(n+l](c/a)(sup 2n+4), where c is the 3480 km radius of Earth's core. (This is compatible with a usually mainly geocentric axial dipolar field). Amplitude K is estimated by fitting theoretical to observational spectra through degree 12. The resulting calibrated expectation spectrum is summed through degree 12 to estimate expected square intensity {F(sup 2)}. The sum also estimates {F(sup 2)} averaged over geologic time, in so far as the present magnetic spectrum is a fair sample of that generated in the past by core geodynamic processes.

Voorhies, Coerte↗

A Geomagnetic Estimate of Mean Paleointensity

To test a statistical hypothesis about Earth's magnetic field against paleomagnetism, the present field is used to estimate time averaged paleointensity. The estimate used the modern magnetic multipole spectrum R(n), which gives the mean square induction represented by spherical harmonics of degree n averaged over the sphere of radius a = 6371.2 km. The hypothesis asserts that low degree multi-pole powers of the coresource field are distributed as chi-squared with 2n+1 degrees of freedom and expectation values, where c is the 3480 km radius of the Earth's core. (This is compatible with a usually mainly geocentric axial dipolar field). Amplitude K is estimated by fitting theoretical to observational spectra through degree 12. The resulting calibrated expectation spectrum is summed through degree 12 to estimate expected square intensity F(exp 2). The sum also estimates F(exp 2) averaged over geologic time, in so far as the present magnetic spectrum is a fair sample of that generated in the past by core geodynamic processes. Additional information is included in the original extended abstract.

Voorhies, Coerte V.↗

The host galaxies of fast-ejecta core-collapse supernovae

Spectra of broad-lined Type Ic supernovae (SNe Ic-BL), the only kind of SN observed at the locations of long-duration gamma-ray bursts (LGRBs), exhibit wide features indicative of high ejecta velocities (∼0.1c). We study the host galaxies of a sample of 245 low-redshift (z < 0.2) core-collapse SNe, including 17 SNe Ic-BL, discovered by galaxy-untargeted searches, and 15 optically luminous and dust-obscured z < 1.2 LGRBs. We show that, in comparison with Sloan Digital Sky Survey galaxies having similar stellar masses, the hosts of low-redshift SNe Ic-BL and z < 1.2 LGRBs have high stellar mass and star formation rate densities. Core-collapse SNe having typical ejecta velocities, in contrast, show no preference for such galaxies. Moreover, we find that the hosts of SNe Ic-BL, unlike those of SNe Ib/Ic and SNe II, exhibit high gas velocity dispersions for their stellar masses. The patterns likely reflect variations among star-forming environments and suggest that LGRBs can be used as probes of conditions in high-redshift galaxies. They may be caused by efficient formation of massive binary progenitor systems in densely star-forming regions, or, less probably, a higher fraction of stars created with the initial masses required for an SN Ic-BL or LGRB. Finally, we show that the preference of SNe Ic-BL and LGRBs for galaxies with high stellar mass and star formation rate densities cannot be attributed to a preference for low metal abundances but must reflect the influence of a separate environmental factor.

79 ASTRONOMY AND ASTROPHYSICS↗

Nonparametric Multiparticle Set Methods for Interpreting Environmental Samples

Collection and analysis of environmental samples is commonly used by a range of stakeholders in nuclear safeguards and security contexts. While the ubiquity of samples and their transport in the environment allow regular collection, developing and demonstrating methods for analyzing these samples is difficult. In this work, an environmental sample consists of a set of one or more individual particles. Recent advances in reactor simulation have allowed us to generate data that are more representative of real-world environmental samples, enabling statistically defensible method development and testing. The most notable of these advances is a drastic increase in the number of material depletion regions, which allows our simulations to capture the variation in isotopic composition seen at length scales consistent with environmental samples. Traditional approaches for handling multiparticle samples treat each particle in the sample individually, estimating the quantity of interest (e.g., core-average burnup) resulting from measurement and analysis of signatures (e.g., nuclide assays) from each individual particle. Individual estimates are then averaged to generate a single estimate of the quantity of interest over the entire sample. In this presentation, we introduce two novel approaches for interpreting environmental samples that comprise of multiple particles: (1) the Quantile-Quantile Comparator, which uses a multivariate generalization of quantile-quantile plots for comparing unknown statistical distributions, and (2) the Set Transformer, an attention-based neural network module designed to model interactions among elements (particles) in the input set (sample). Statistically representative sampling cannot be guaranteed as samples are passively collected and are beholden to what particles are available in the environment. These new analysis methods for set-input problems are expected to be more robust than traditional approaches to issues of sampling bias where particles are not uniformly distributed throughout regions of interest, as well as generally outperform traditional approaches by jointly considering all elements in the set. We will present results comparing the performance of traditional single particle approaches and the novel Quantile-Quantile Comparator and Set Transformer for interpretation of simulated environmental samples.

Phathanapirom, Birdy↗

Shake loss intensities in x-ray photoelectron spectroscopy: Theory, experiment, and atomic composition accuracy for MgO and related compounds

The relative intensities of XPS core levels, scaled by their photoionization cross sections, are regularly used to determine sample atomic composition. Cross sections, however, give the intensity to all possible final states for the core ionizations, not just to the main peak. This includes all intrinsic satellite structure (shake states and, for open shell systems, the different ionic multiplets). In practice, for solids, this is usually experimentally impossible to determine accurately because such a satellite structure sits on the inelastically scattered electron background and cannot be easily separated. Therefore, usually, only the intensity of the main peak is used. This limits the ultimate possible accuracy of XPS composition determination. The purpose of the present paper is to examine the contributions that a theoretical analysis of losses of intensity can make to improve quantitation. For an MgO single crystal, we show that the correct stoichiometry of 1:1 can be recovered using the theoretical analysis of the experimental MgO peak ratio intensities. For materials with a sufficient bandgap for the XPS main peaks to be separated from the scattered background, the intensity of main peaks can often be accurately determined. Thus, if one uses theory to calculate that fraction of the total intensity lost from a main peak into all its satellite structure, the intensity of just main peaks could then be used to more accurately determine relative atom % composition. This work tests this approach using a single crystal MgO (50% Mg, 50% O) standard. Ab initio electronic structure theory of representative MgO clusters is used to determine Hartree–Fock wave functions for the ground state and final ionized states corresponding to the main Mg 2p and O1s XPS peaks of the oxide. The sudden approximation, SA, is used to determine the fractional losses from these main peaks to shake satellites, which is found to be greater for O1s than Mg2p. This results in predicted “apparent composition” for stoichiometric MgO of 55.2% Mg, 44.8% O instead of the true 50% Mg, 50% O. Equivalent theory for CaO results in a predicted apparent Ca value of 53.4%. Experimentally, using Mg2s or 2p intensity ratio to O1s, we find values between 52.2% and 56.0% Mg using two crystals and four different instrument electron pass energies. The average value of the measurements is 54.5% Mg when corrected for the presence of an adventitious carbon overlayer and slight surface hydroxide. Though this agreement with theory may be somewhat fortuitous, given the potential experimental errors, which are fully discussed, it is similar to that in our earlier study on LiF. We also present preliminary experimental data on Mg(OH) 2 and MgSO 4 , which show a similar trend of apparently higher than 50% Mg, but we have no theory values. We are not yet able to experimentally test for validation of the difference between apparent composition for MgO (55.2% Mg) and CaO (53.4% Ca), owing to significant carbonate formation at the surface of the single crystal CaO. Here, an important conclusion is that the theoretical determination of shake losses, obtained with ab initio wavefunctions and the SA, is likely to be a useful way to calibrate the accuracy and reliability of compositions obtained from XPS intensities and merits further study.

47 OTHER INSTRUMENTATION↗

Citizen Green #1 Well: MICP and Pycnometry Data, Sidewall Cores

This submission includes information on helium pycnometry & MICP measurements conducted on sidewall sub-samples from the Citizen Green #1 well drilled on King Island, CA (API 07720688) as part of the WESTCARB partnership basin characterization effort. Cores were acquired with a rotary sidewall tool at a range of depths. See the sidewallCore submission for additional formation data.

Citizen Green↗

Inverse hydrochemical models of aqueous extracts tests

Aqueous extract test is a laboratory technique commonly used to measure the amount of soluble salts of a soil sample after adding a known mass of distilled water. Measured aqueous extract data have to be re-interpreted in order to infer porewater chemical composition of the sample because porewater chemistry changes significantly due to dilution and chemical reactions which take place during extraction. Here we present an inverse hydrochemical model to estimate porewater chemical composition from measured water content, aqueous extract, and mineralogical data. The model accounts for acid-base, redox, aqueous complexation, mineral dissolution/precipitation, gas dissolution/ex-solution, cation exchange and surface complexation reactions, of which are assumed to take place at local equilibrium. It has been solved with INVERSE-CORE{sup 2D} and been tested with bentonite samples taken from FEBEX (Full-scale Engineered Barrier EXperiment) in situ test. The inverse model reproduces most of the measured aqueous data except bicarbonate and provides an effective, flexible and comprehensive method to estimate porewater chemical composition of clays. Main uncertainties are related to kinetic calcite dissolution and variations in CO2(g) pressure.

54 ENVIRONMENTAL SCIENCES↗

Microstructure of In-Core Molten Salt Corrosion Hastelloy N{sup R} and 316 Stainless Steel

Since 2011, many materials have been discussed for potential application in Fluoride salt-cooled High-temperature nuclear Reactors (FHRs), which are emerging as leading reactor concept for the next generation of nuclear reactors thanks to the benefits of a high degree of passive safety, high thermal efficiency, and low spent fuel volume. Among these discussed materials, Hastelloy N{sup R} and 316L stainless steel have been selected as the most likely candidate alloys for FHRs. To provide direct experience in integrating a real system using molten FLiBe salt for reactor operation, these two candidate alloys were experimentally tested in Li-7 enriched Li{sub 2}BeF{sub 4} (FLiBe) molten salt in the core of MIT Research Reactor (MITR) at 700 deg. C for 1000 hours. After in-core corrosion testing, some basic post-irradiation examinations (PIE) including weight change per unit area and surface profile as well as surface morphology were conducted in the MIT Nuclear Reactor Laboratory (NRL) and compared with out-of-reactor corrosion samples. The deep understanding of these alloys in high-temperature molten salt with strong neutron irradiation requires further microstructural analysis such as electron microscopy and energy dispersive spectroscopy on the surface and cross-section of the in-core corrosion tested samples. The challenge in the microstructural analysis is due to the high radioactivity from the gamma emitting isotopes formed in alloys during neutron irradiation. Additionally, the facilities that are authorized for radioactive materials are very limited on campus. In this study, the microstructure of the in-core corrosion tested Hastelloy N{sup R} and 316L stainless steel specimen was analyzed by using the facilities at the Center for Advanced Energy Studies (CAES) at Idaho National Laboratory (INL) through the Nuclear Science User Facilities (NSUF) Rapid Turnaround Experiment (RTE) program.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Petrology of the Crystalline Rocks Hosting the Santa Fe Impact Structure

We collected samples from within the area of shatter cone occurrence and for approximately 8 kilometers (map distance) along the roadway. Our primary goal is to date the impact. Our secondary goal is to use the petrology and Ar systematics to provide further insight into size and scale of the impact. Our approach is to: Conduct a detailed petrology study to identify lithologies that share petrologic characteristics and tectonic histories but with differing degrees of shock. Obtain micro-cores of K-bearing minerals from multiple samples for Ar-40/Ar-39 analysis. Examine the Ar diffusion patterns for multiple minerals in multiple shocked and control samples. This will help us to better understand outcrop and regional scale relationships among rocks and their responses to the impact event.

Schrader, C. M.↗

Planetary and Primitive Object Strength Measurement and Sampling Apparatus

Support is requested for continuation of a program of dynamic impact (harpoon) coring of planetary, comet, or asteroid surface materials. We have previously demonstrated that good quality cores are obtainable for planetary materials with compressive strengths less than 200 MPa. Since the dynamics of penetration are observable on a Discovery class spacecraft, which images the sampling operation, these data can be used with a model developed under this project, to measure in-situ strength and frictional strength of the crust of the object. During the last year we have developed a detailed analytic model of penetrator mechanics. Progress is reported for the solid penetrators experiments, the CIT penetrator model, and the impact spall sampling apparatus.

Ahrens, Thomas J.↗

Compression Behavior of Fluted-Core Composite Panels

In recent years, fiber-reinforced composites have become more accepted for aerospace applications. Specifically, during NASA s recent efforts to develop new launch vehicles, composite materials were considered and baselined for a number of structures. Because of mass and stiffness requirements, sandwich composites are often selected for many applications. However, there are a number of manufacturing and in-service concerns associated with traditional honeycomb-core sandwich composites that in certain instances may be alleviated through the use of other core materials or construction methods. Fluted-core, which consists of integral angled web members with structural radius fillers spaced between laminate face sheets, is one such construction alternative and is considered herein. Two different fluted-core designs were considered: a subscale design and a full-scale design sized for a heavy-lift-launch-vehicle interstage. In particular, axial compression of fluted-core composites was evaluated with experiments and finite-element analyses (FEA); axial compression is the primary loading condition in dry launch-vehicle barrel sections. Detailed finite-element models were developed to represent all components of the fluted-core construction, and geometrically nonlinear analyses were conducted to predict both buckling and material failures. Good agreement was obtained between test data and analyses, for both local buckling and ultimate material failure. Though the local buckling events are not catastrophic, the resulting deformations contribute to material failures. Consequently, an important observation is that the material failure loads and modes would not be captured by either linear analyses or nonlinear smeared-shell analyses. Compression-after-impact (CAI) performance of fluted core composites was also investigated by experimentally testing samples impacted with 6 ft.-lb. impact energies. It was found that such impacts reduced the ultimate load carrying capability by approximately 40% on the subscale test articles and by less than 20% on the full-scale test articles. Nondestructive inspection of the damage zones indicated that the detectable damage was limited to no more than one flute on either side of any given impact. More study is needed, but this may indicate that an inherent damage-arrest capability of fluted core could provide benefits over traditional sandwich designs in certain weight-critical applications.

Schultz, Marc R.↗

Emulation of Core Flight System Applications for Flight Software Development and Validation

The Mars Sample Return (MSR) campaign is an unprecedented attempt in the return of Martian samples back to Earth. The ascent from the surface will be performed by the Mars Ascent Vehicle (MAV), a critical element in the mission that National Aeronautics and Space Administration (NASA) Marshall Space Flight Center (MSFC) is developing. To this end, innovations in flight software development, verification, and validation are occurring. The MAV flight computer will run Core Flight System (cFS), an open-source software environment developed by NASA Goddard Space Flight Center (GSFC). NASA Marshall’s MAV Mission and Fault Management (M&FM) Team has implemented an emulation of two applications of this architecture: Limit Checker and Stored Command. Using an emulation of the functionalities of these applications allows for rapid prototyping of table-based algorithms. Further, M&FM is leveraging an in-house, low-fidelity but high-throughput State Analysis Model (SAM), an integrated MATLAB Stateflow Plant and Software model. This model is run in parallel with the cFS emulation for full flyout testing of the M&FM algorithms, verification of intent of these algorithms, and for future auto-generation of application-ingestible M&FM tables. The tables can then be delivered to the MAV Flight Software (FSW) team in a seamless process, reducing the cost of traditional FSW development and the risk of starting M&FM FSW development at later points in the NASA program life cycle.

Cody Wheeler↗

Emulation of Core Flight System Applications for Flight Software Development and Validation

The Mars Sample Return (MSR) campaign is an unprecedented attempt in the return of Martian samples back to Earth. The ascent from the surface will be performed by the Mars Ascent Vehicle (MAV), a critical element in the mission that National Aeronautics and Space Administration (NASA) Marshall Space Flight Center (MSFC) is developing. To this end, innovations in flight software development, verification, and validation are occurring. The MAV flight computer will run Core Flight System (cFS), an open-source software environment developed by NASA Goddard Space Flight Center (GSFC). NASA Marshall’s MAV Mission and Fault Management (M&FM) Team has implemented an emulation of two applications of this architecture: Limit Checker and Stored Command. Using an emulation of the functionalities of these applications allows for rapid prototyping of table-based algorithms. Further, M&FM is leveraging an in-house, low-fidelity but high-throughput State Analysis Model (SAM), an integrated MATLAB Stateflow Plant and Software model. This model is run in parallel with the cFS emulation for full flyout testing of the M&FM algorithms, verification of intent of these algorithms, and for future auto-generation of application-ingestible M&FM tables. The tables can then be delivered to the MAV Flight Software (FSW) team in a seamless process, reducing the cost of traditional FSW development and the risk of starting M&FM FSW development at later points in the NASA program life cycle.

Cody Wheeler↗

Primary sedimentary structures and the internal architecture of a Martian sand body in search of evidence for sand transport and deposition

Lunar experiences show that unmanned sample return missions, despite limitations on sample size, can produce invaluable data to infer crustal processes, regolith processes, regolith-atmosphere/ionosphere interaction processes, etc. Drill cores provide a record of regolith evolution as well as a more complete sample of the regolith than small scoops and/or rakes. It is proposed that: (1) a hole be drilled in a sand body to obtain continuous oriented cores; a depth of about 10 m would be compatible with what we know of bed form hierarchy of terrestrial stream deposits; (2) two trenches, at right angles to each other and close to the drill-hole, be dug and the walls scraped lightly such that primary/internal sedimentary structures of the sand body become visible; (3) the walls of the trenches be made gravitationally stable by impregnation techniques; (4) acetate or other peels of a strip on each wall be taken; and (5) appropriately scaled photographs of the walls be taken at different sun-angles to ensure maximum ease of interpretation of sedimentary structures; and, to correlate these structural features with those in the core at different depth levels of the core.

Basu, Abhijit↗

Zooming in on the progenitors of superluminous supernovae with the HST

We present Hubble Space Telescope (HST) rest-frame ultraviolet imaging of the host galaxies of 16 hydrogen-poor superluminous supernovae (SLSNe), including 11 events from the Pan-STARRS Medium Deep Survey. Taking advantage of the superb angular resolution of HST, we characterize the galaxies’ morphological properties, sizes, and star formation rate (SFR) densities. We determine the supernova (SN) locations within the host galaxies through precise astrometric matching and measure physical and host-normalized offsets as well as the SN positions within the cumulative distribution of UV light pixel brightness. We find that the host galaxies of H-poor SLSNe are irregular, compact dwarf galaxies, with a median half-light radius of just 0.9 kpc. The UV-derived SFR densities are high (〈Σ{sub SFR}〉≃0.1M{sub ⊙} yr{sup −1} kpc{sup −2}), suggesting that SLSNe form in overdense environments. Their locations trace the UV light of their host galaxies, with a distribution intermediate between that of long-duration gamma-ray bursts (LGRBs; which are strongly clustered on the brightest regions of their hosts) and a uniform distribution (characteristic of normal core-collapse SNe), though cannot be statistically distinguished from either with the current sample size. Taken together, this strengthens the picture that SLSN progenitors require different conditions than those of ordinary core-collapse SNe to form and that they explode in broadly similar galaxies as do LGRBs. If the tendency for SLSNe to be less clustered on the brightest regions than are LGRBs is confirmed by a larger sample, this would indicate a different, potentially lower-mass progenitor for SLSNe than LRGBs.

79 ASTRONOMY AND ASTROPHYSICS↗

Oxidation controlled phase composition of FeCo(Zr) nanoparticles in CaF{sub 2} matrix

Results of the study of oxidised (FeCoZr){sub x}(CaF{sub 2}){sub 100−x} films in a wide composition range (30 ≤ x ≤ 74 at.%) sintered at oxygen pressures P{sub O} = 4.3 and 9.8 mPa with X-ray diffraction (XRD), transmission electron microscopy (TEM), X-ray absorption spectroscopy (XAS), {sup 57}Fe Mössbauer spectroscopy (MS), and vibrating sample magnetometry (VSM) are reported. A “crystalline metallic core–amorphous oxide shell” structure of nanoparticles (NPs) in films oxidised at lower P{sub O} = 4.3 mPa is observed in TEM images. A combined use of XRD, MS and XAS techniques provides identification of NP phase composition evidencing α-FeCo(Zr) core of the variable content depending on x and a complex oxide shell including amorphous α-Fe{sup 3+}{sub 2}O{sub 3} together with Co{sup 2+}{sub 1−y}Fe{sup 2+}{sub y}O at low x (30–36 at.%). Full oxidation of NPs at higher P{sub O} = 9.8 mPa is indicated by TEM, XRD, MS and XAS patterns evidencing the formation of “crystalline Co{sup 2+}{sub 1−y}Fe{sup 2+}{sub y}O core–amorphous α-Fe{sup 3+}{sub 2}O{sub 3} shell” structure. Progressive oxidation of NPs with decreasing x at P{sub O} = 4.3 mPa as well as with P{sub O} increase is followed by variation of average centre shifts < δ > obtained from deconvoluted {sup 57}Fe Mössbauer spectra. Magnetometry measurements of films sintered at P{sub O} = 4.3 mPa reveal an effect of exchange bias confirming “ferromagnetic metallic core–antiferromagnetic oxide shell” structure of NPs. The results show that phase composition of oxide shells is governed both by concentration of oxygen available during synthesis and on the x. Schemes of progressive NP oxidation with identified phase composition as a function of P{sub O} and x values are proposed. - Highlights: • A selective oxidation of Fe in Fe–Co nanoparticles, NPs, is revealed. • Oxidation controlled composition of Fe–Co NPs in CaF{sub 2} matrix is determined. • “Metallic core–amorphous oxide shell”-like NPs are obtained at low oxygen pressure. • “Crystalline core–amorphous shell” oxide structures appear at high oxygen pressure. • A scheme of phase occurrence and structure of nanoparticles is proposed.

36 MATERIALS SCIENCE↗