SEARCH · Engineering Papers

Results for “code comparisons”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,279 records · Page 71

All sources NASA NTRS DOE OSTI

NASA NTRS2006

Comparison of Measured Leakage Current Distributions with Calculated Damage Energy Distributions in HgCdTe

This paper presents a combined Monte Carlo and analytic approach to the calculation of the pixel-to-pixel distribution of proton-induced damage in a HgCdTe sensor array and compares the results to measured dark current distributions after damage by 63 MeV protons. The moments of the Coulombic, nuclear elastic and nuclear inelastic damage distribution were extracted from Monte Carlo simulations and combined to form a damage distribution using the analytic techniques first described in [I]. The calculations show that the high energy recoils from the nuclear inelastic reactions (calculated using the Monte Car10 code MCNPX [2]) produce a pronounced skewing of the damage energy distribution. The nuclear elastic component (also calculated using the MCNPX) has a negligible effect on the shape of the damage distribution. The Coulombic contribution was calculated using MRED [3,4], a Geant4 [4,5] application. The comparison with the dark current distribution strongly suggests that mechanisms which are not linearly correlated with nonionizing damage produced according to collision kinematics are responsible for the observed dark current increases. This has important implications for the process of predicting the on-orbit dark current response of the HgCdTe sensor array.

Marshall, C. J.↗

NASA NTRS2011

Comparison of DSMC and CFD Solutions of Fire II Including Radiative Heating

The ability to compute rarefied, ionized hypersonic flows is becoming more important as missions such as Earth reentry, landing high mass payloads on Mars, and the exploration of the outer planets and their satellites are being considered. These flows may also contain significant radiative heating. To prepare for these missions, NASA is developing the capability to simulate rarefied, ionized flows and to then calculate the resulting radiative heating to the vehicle's surface. In this study, the DSMC codes DAC and DS2V are used to obtain charge-neutral ionization solutions. NASA s direct simulation Monte Carlo code DAC is currently being updated to include the ability to simulate charge-neutral ionized flows, take advantage of the recently introduced Quantum-Kinetic chemistry model, and to include electronic energy levels as an additional internal energy mode. The Fire II flight test is used in this study to assess these new capabilities. The 1634 second data point was chosen for comparisons to be made in order to include comparisons to computational fluid dynamics solutions. The Knudsen number at this point in time is such that the DSMC simulations are still tractable and the CFD computations are at the edge of what is considered valid. It is shown that there can be quite a bit of variability in the vibrational temperature inferred from DSMC solutions and that, from how radiative heating is computed, the electronic temperature is much better suited for radiative calculations. To include the radiative portion of heating, the flow-field solutions are post-processed by the non-equilibrium radiation code HARA. Acceptable agreement between CFD and DSMC flow field solutions is demonstrated and the progress of the updates to DAC, along with an appropriate radiative heating solution, are discussed. In addition, future plans to generate more high fidelity radiative heat transfer solutions are discussed.

Liechty, Derek S.↗

NASA NTRS1984

Airfoil trailing edge flow measurements and comparison with theory, incorporating open wind tunnel corrections

Trailing edge data for boundary layer-near wake thickness parameters are given for airfoils and flat plates. Reynolds number effects are examined as a function of model size, velocity and boundary layer tripping. These data expand that presented previously by the authors particularly for airfoil non-zero angles of attack. Comparisons are made here with boundary layer calculations using potential flow modeling and a well documented two-dimensional finite-difference method for laminar and turbulent boundary layers. Open wind tunnel corrections to angle of attack and camber are developed and are incorporated in the potential flow modeling to assure correct comparisons for non-zero angles of attack. It was found that although the open tunnel flow turbulence affected boundary layer transition for the higher velocities the theory successfully 'brackets' the data. Comparisons demonstrate the degree of accuracy one might expect for the prediction of boundary layer thickness parameters when given only geometry and nominal flow conditions as input to boundary layer codes.

Brooks, T. F.↗

NASA NTRS1986

Computation of transonic flow about helicopter rotor blades

An inviscid, nonconservative, three-dimensional full-potential flow code, ROT22, has been developed for computing the quasi-steady flow about a lifting rotor blade. The code is valid throughout the subsonic and transonic regime. Calculations from the code are compared with detailed laser velocimeter measurements made in the tip region of a nonlifting rotor at a tip Mach number of 0.95 and zero advance ratio. In addition, comparisons are made with chordwise surface pressure measurements obtained in a wind tunnel for a nonlifting rotor blade at transonic tip speeds at advance ratios from 0.40 to 0.50. The overall agreement between theoretical calculations and experiment is very good. A typical run on a CRAY X-MP computer requires about 30 CPU seconds for one rotor position at transonic tip speed.

Arieli, R.↗

NASA NTRS1989

System architectures for telerobotic research

Several activities are performed related to the definition and creation of telerobotic systems. The effort and investment required to create architectures for these complex systems can be enormous; however, the magnitude of process can be reduced if structured design techniques are applied. A number of informal methodologies supporting certain aspects of the design process are available. More recently, prototypes of integrated tools supporting all phases of system design from requirements analysis to code generation and hardware layout have begun to appear. Activities related to system architecture of telerobots are described, including current activities which are designed to provide a methodology for the comparison and quantitative analysis of alternative system architectures.

Harrison, F. Wallace↗

NASA NTRS1989

Hypersonic CFD applications for the National Aero-Space Plane

Design and analysis of the NASP depends heavily upon developing the critical technology areas that cover the entire engineering design of the vehicle. These areas include materials, structures, propulsion systems, propellants, integration of airframe and propulsion systems, controls, subsystems, and aerodynamics areas. Currently, verification of many of the classical engineering tools relies heavily on computational fluid dynamics. Advances are being made in the development of CFD codes to accomplish nose-to-tail analyses for hypersonic aircraft. Additional details involving the partial development, analysis, verification, and application of the CFL3D code and the SPARK combustor code are discussed. A nonequilibrium version of CFL3D that is presently being developed and tested is also described. Examples are given of portion calculations for research hypersonic aircraft geometries and comparisons with experiment data show good agreement.

Richardson, Pamela F.↗

NASA NTRS1991

The NASA/industry design analysis methods for vibrations (DAMVIBS) program: Accomplishments and contributions

A NASA Langley-sponsored rotorcraft structural dynamics program, known as Design Analysis Methods for VIBrationS (DAMVIBS), has been under development since 1984. The objective of this program was to establish the technology base needed by the industry to develop an advanced finite-element-based dynamics design analysis capability for vibrations. Under the program, teams from the four major helicopter manufacturers have formed finite-element models, conducted ground vibration tests, made test/analysis comparisons of both metal and composite airframes, performed 'difficult components' studies on airframes to identify components which need more complete finite-element representation for improved correlation, and evaluated industry codes for computing coupled rotor-airframe vibrations. Studies aimed at establishing the role that structural optimization can play in airframe vibrations design work have also been initiated. Five government/industry meetings were held in connection with these activities during the course of the program. Because the DAMVIBS Program is coming to an end, the fifth meeting included a brief assessment of the program and its benefits to the industry.

Kvaternik, Raymond G.↗

NASA NTRS1991

Thermal calibration and analysis of a Bridgman flight furnace

A combination of computer modeling and experimental measurements is proposed which permits the calibration of the temperature profile for a spacecraft flight furnace. The Fluent code based on the finite difference method uses the furnace set-point temperatures as boundary conditions to model a Bridgman directional solidification furnace. Experimental measurements are employed as a comparison for the numerical analysis, and the radial gradients and wall temperatures are selected when the calculated values are sufficiently close to those from measurements. The calculations are found to agree with experimental data, and some results of the modeling are given which relate to specific furnace parameters. The CFD approach facilitates the transposition of furnace calibration to microgravitational operation in addition to providing precise initial radial temperature gradients and furnace-wall temperatures.

Knuteson, D. J.↗

NASA NTRS1993

Evaluation of Baldwin-Barth turbulence model with thin-layer Navier-Stokes computation of an axisymmetric afterbody-exhaust jet flowfield

Axisymmetric steady flowfield over a steep circular arc afterbody with a choked exhaust jet in a subsonic freestream is numerically investigated using overflow code, developed by NASA Ames. The accuracy of Baldwin-Barth one-equation turbulence model for the computation of separated flow and plume shear layers is assessed by a comparison of predictions with available measurements from NASA Langley. The results show that the Baldwin-Barth turbulence model performs better than the Baldwin-Lomax algebraic model in predicting the surface pressure distribution in the separated flow region of the afterbody. In the jet mixing layer, the Baldwin-Barth model considerably unpredicts the growth of the shear layer, as does the Baldwin-Lomax model. It is shown that the one-equation turbulence model needs improvement for the prediction of separated flow due to smooth adverse pressure gradient, and mixing layer growth.

Kandula, M.↗

NASA NTRS1991

The NASA/industry design analysis methods for vibrations (DAMVIBS) program - Accomplishments and contributions

Kvaternik, Raymond G.↗

NASA NTRS1993

A preferential vibration dissociation coupling model for nonequilibrium flowfields

A preferential vibration-dissociation coupling model is incorporated into a radiatively coupled viscous shock laver code that also includes chemical, radiative, and thermal nonequilibrium. Stagnation point flow profiles are obtained for various Fire 2 flight conditions and for a typical 14 km/sec AOTV case, and comparisons are made with Fire 2 experimental data. Adjustments in molecular absorption coefficients are also made for several diatomic species. Based on comparisons with experimental data, very little preferential dissociation behavior is present in the Fire 2 flight conditions.

Mcgough, David E.↗

NASA NTRS1996

Implementation of a two-equation k-omega turbulence model in NPARC

The implementation of a two-equation k-omega turbulence model into the NPARC flow solver is described. Motivation for the selection of this model is given, major code modifications are outlined, new imputs to the code are described, and results are presented for several validation cases: an incompressible flow over a smooth flat plate, a subsonic diffuser flow, and a shock-induced separated flow. Comparison of results with the k-epsilon model indicate that the k-omega model predicts simple flows equally well whereas, for adverse pressure gradient flows, the k-omega model outperforms the other turbulence models in NPARC.

Yoder, Dennis A.↗

NASA NTRS1999

Numerical Simulation of Complex Turbomachinery Flows

An unsteady, multiblock, Reynolds Averaged Navier Stokes solver based on Runge-Kutta scheme and Pseudo-time step for turbo-machinery applications was developed. The code was validated and assessed against analytical and experimental data. It was used to study a variety of physical mechanisms of unsteady, three-dimensional, turbulent, transitional, and cooling flows in compressors and turbines. Flow over a cylinder has been used to study effects of numerical aspects on accuracy of prediction of wake decay and transition, and to modify K-epsilon models. The following simulations have been performed: (a) Unsteady flow in a compressor cascade: Three low Reynolds number turbulence models have been assessed and data compared with Euler/boundary layer predictions. Major flow features associated with wake induced transition were predicted and studied; (b) Nozzle wake-rotor interaction in a turbine: Results compared to LDV data in design and off-design conditions, and cause and effect of unsteady flow in turbine rotors were analyzed; (c) Flow in the low-pressure turbine: Assessed capability of the code to predict transitional, attached and separated flows at a wide range of low Reynolds numbers and inlet freestream turbulence intensity. Several turbulence and transition models have been employed and comparisons made to experiments; (d) leading edge film cooling at compound angle: Comparisons were made with experiments, and the flow physics of the associated vortical structures were studied; and (e) Tip leakage flow in a turbine. The physics of the secondary flow in a rotor was studied and sources of loss identified.

Chernobrovkin, A. A.↗

NASA NTRS1994

A Review of Evidence for High Life Coefficients on Propeller and Rotor Blades Under Static Thrust Conditions with Some New Experimental Results

Interest has increased recently in the thrust-producing capability of rotors at very high collective pitch angles. An early reference noted this behaviour in rotors and offered alternative models for section lift characteristics to explain it. The same phenomenon was coincidentally noted and used in a propeller code, resulting in very good correlation with static thrust data. The proposed paper will present experimental data demonstrating the pronounced persistence of thrust for propellers at increasing collective pitch angles. Comparisons with blade element/momentum theory will be made. These results are expected to point to the need to define (ultimately to explain) aerodynamic lift and drag behaviour in a rotating environment. Experimental measurements made by the U.S. Army Aeroflightdynamics Directorate at the Ames Research Center have shown that locally measured normal force coefficients along the span of a highly twisted rotor blade continue to increase at high values of collective pitch. In some cases these coefficients exceed expected values for the same type of airfoil tested under two dimensional conditions. To date no one to the authors' knowledge has defined the variation of C(n) with pitch for very high angles (to 45 deg) in a rotating environment and for a blade of reasonably high aspect ratio; however, total propeller thrust measurements support the idea that stalling does not occur in the same way as on a wing. This paper will present experimental data in the form of surface pressure distributions as well as flow visualization (microtufts) to explore the aerodynamic behavior of the rotating airfoil at high values of blade incidence. This paper also reviews experimental evidence and infers some high lift coefficient behavior from it. Comparisons between predicted thrust, utilizing modified airfoil characteristics and a blade element model, and measured thrust for both rotors and propellers that cover the extremes of collective pitch are shown and discussed.

Talbot, Peter D.↗

NASA NTRS2004

High-Fidelity Three-Dimensional Simulation of the GE90

A full-engine simulation of the three-dimensional flow in the GE90 94B high-bypass ratio turbofan engine has been achieved. It would take less than 11 hr of wall clock time if starting from scratch through the exploitation of parallel processing. The simulation of the compressor components, the cooled high-pressure turbine, and the low-pressure turbine was performed using the APNASA turbomachinery flow code. The combustor flow and chemistry were simulated using the National Combustor Code (NCC). The engine simulation matches the engine thermodynamic cycle for a sea-level takeoff condition. The simulation is started at the inlet of the fan and progresses downstream. Comparisons with the cycle point are presented. A detailed look at the blockage in the turbomachinery is presented as one measure to assess and view the solution and the multistage interaction effects.

Turner, Mark G.↗

NASA NTRS2008

High Speed Solution of Spacecraft Trajectory Problems Using Taylor Series Integration

Taylor series integration is implemented in a spacecraft trajectory analysis code-the Spacecraft N-body Analysis Program (SNAP) - and compared with the code s existing eighth-order Runge-Kutta Fehlberg time integration scheme. Nine trajectory problems, including near Earth, lunar, Mars and Europa missions, are analyzed. Head-to-head comparison at five different error tolerances shows that, on average, Taylor series is faster than Runge-Kutta Fehlberg by a factor of 15.8. Results further show that Taylor series has superior convergence properties. Taylor series integration proves that it can provide rapid, highly accurate solutions to spacecraft trajectory problems.

Scott, James R.↗

NASA NTRS2020

Simulation of a Full-Scale Crash Test of a Fokker F28 Fellowship Aircraft

In June 2019, a full-scale crash test of a Fokker F28 Fellowship aircraft was conducted as part of a joint National Aeronautics and Space Administration/Federal Aviation Administration (NASA/FAA) project to investigate the performance of transport aircraft under realistic crash conditions. The test objectives were to provide data for assessment of transport aircraft crash worthiness and to generate test data for model validation. The test article was loaded with transport aircraft seats in a 3+2 configuration. A total of 24 instrumented Anthropomorphic Test Devices (ATDs) were placed in the seats and restrained. The test article weighed 33,306-lb. and, during the crash test, impacted a 2-ft. high soil bed at 65.3-ft/s forward and 31.8-ft/s vertical velocity. The full-scale crash test was simulated using the commercial nonlinear explicit transient dynamic finite element code, LSDYNA®. This paper will provide a description of the test article and the crash test conditions, document the F28 full-scale model development, and present test-analysis comparisons in several categories including inertial properties, kinematic responses, structural acceleration responses, and airframe deformation and failure. In addition, test-analysis results will be quantified based on the International Organization for Standardization (ISO) 16250 curve comparison methodology.

Jackson, Karen E.↗

NASA NTRSDate not supplied

Predicted Performance Effects of Blade Elasticity on Testing of Rotors for Mars

The Rotor Optimization for the Advancement of Mars Exploration project (ROAMX) has designed and manufactured a set of rotor blades optimized for hover on Mars. These blades will soon be tested for hover performance in the NASA Ames Research Center Planetary Aeolian Laboratory, a large vacuum chamber capable of rotor testing at reduced pressures. To match the tip Mach numbers during this testing with the tip Mach numbers that would be experienced in the Martian atmosphere, the rotor will be spun faster in the vacuum chamber than it would be spun on Mars. While this accomplishes the goal of simulating the tip Mach numbers of Mars operations, the elevated RPM may have undesired consequences for performance, due to elastic deflections of the blades. The purpose of this paper is to use CAMRAD II, a rotorcraft comprehensive analysis code, to predict the effect on performance of blade elasticity at elevated RPM in the vacuum chamber environment. Results are presented for different thrust conditions and different rotor speeds, and comparisons are made between rigid and elastic blade predictions. Overall, the CAMRAD II analysis suggests that blade elasticity does influence rotor performance in the operating conditions of interest, although the effect is moderate enough to conclude that the PAL testing will be a good simulation of Mars operation.

Blade elasticity↗