Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “boundary layer analysis”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,279 records · Page 71

Diurnal Waves Forced By Horizontal Convergence of Near-Surface Winds on Mars

Boundary-layer winds near steeply sloped topography excite a distinct type of atmospheric wave. Basic properties of the waves were determined through analysis of 7 Mars years of temperature profiles from the Mars Climate Sounder on Mars Reconnaissance Orbiter. A more complete understanding of the waves was derived from a simulation with the NASA Ames Mars General Circulation Model. This type of wave appears in the tropics in the vicinity of conspicuous surface features, such as large volcanoes and the rim of Isidis Planitia. The amplitude is typically 5–10 K, the vertical wavelength is about 40 km, the zonal wavelength is about 1400 km, and the zonal phase speed relative to the surface is about 25 m s−1. The wave forcing comes from horizontal convergence of the near-surface winds, which generates a daily surge in the vertical winds. These convergence zones were not previously recognized as an important source of atmospheric waves on Mars. Strong forcing occurs only within a limited range of local time, producing wave packets (diurnal pulses) rather than steady oscillations. Waves are present throughout the year and their properties vary with season. Near the solstices, the wave amplitude is largest in the tropics of the summer hemisphere, where the convergence zones are stronger than in the winter hemisphere. The diurnal-mean zonal winds, which vary with latitude and season, control the direction of propagation of the predominant waves through filtering by critical levels.

Mars↗

Laminar-Turbulent Transition Upstream of the Entropy-Layer Swallowing Location in Hypersonic Boundary Layers

Numerical and experimental studies have demonstrated that modal growth of planar Mack modes is responsible for laminar-turbulent transition on sharp cones at hypersonic speeds. However, the physical mechanisms that lead to transition onset upstream of the entropy-layer swallowing location over sufficiently blunt geometries are not well understood as yet. Modal amplification is too weak or nonexistent to initiate transition at moderate-to-large bluntness values. Nonmodal analysis shows that, with increasing nose bluntness, both planar and oblique traveling disturbances that peak within the entropy layer experience appreciable energy amplification. However, because of the relatively weak signature of the nonmodal traveling disturbances within the boundary-layer region, the route to transition onset subsequent to the nonmodal growth remains unclear. Thus, nonlinear parabolized stability equations (NPSE) and direct numerical simulations (DNS) have been used to investigate the potential transition mechanisms over a 7-degree blunt cone that was tested in the AFRL Mach-6 high-Reynoldsnumber facility. Computations are performed to separately follow the nonlinear development of two classes of inflow disturbances, namely, a pair of oblique traveling waves with equal but opposite angles with respect to the mean flow direction and a planar traveling wave. Results in both cases show an excellent agreement between the NPSE and DNS predictions, establishing that the NPSE is an accurate and efficient technique for predicting the nonlinear development for these particular nonmodal traveling disturbances. Computations reveal that the oblique mode interactions lead to the generation of stationary streaks inside the boundary layer that, in turn, facilitate the growth of a subharmonic sinuous disturbance. For relatively modest amplitudes of the inflow disturbance, the oblique-mode breakdown can lead to transition at the measured location of transition onset during the experiment. On the other hand, the nonlinear development of a planar traveling wave leads to the formation of inclined structures just above the boundary-layer edge and these structures are strongly reminiscent of the transitional events observed during blunt cone experiments by using schlieren flow visualizations.

Entropy↗

Ground simulation and tunnel blockage for a jet-flapped, basic STOL model tested to very high lift coefficients

Ground effects experiments and large/small-tunnel interference studies were carried out on a model with a 20-inch (50.8 cm) span wing. The wing, which includes a highly deflected knee-blown flap can be fitted with unflapped tips and slats. A low-mounted tailplane can be fitted to the aft fuselage. Three-component balance meaurements, made with a fixed ground equipped with a single boundary-layer blowing slot, were compared with datum, moving-ground results. Good comparisons were obtained up to model blowing momentum coefficients of approximately two, after which the particular floor blowing settings used proved insufficient to prevent floor separation in the vicinity of the model. Skin friction measurements, taken routinely along the floor centerline, proved invaluable during the analysis of results, and their use is recommended as input to determination of floor BLC setting. A careful investigation was made of pitching moments, including tail-on, close-to-ground cases, with favorable results. Drag proved the most sensitive to the change from a moving to the boundary-layer controlled ground.

Hackett, J. E.↗

The Cretaceous-Tertiary Impact Crater and the Cosmic Projectile that Produced it

Evidence gathered to date from topographic data, geophysical data, well logs, and drill-core samples indicates that the buried Chicxulub basin, the source crater for the approximately 65 Ma Cretaceous-Tertiary (K/T) boundary deposits, is approximately 300 km in diameter. A prominent topographic ridge and a ring of gravity anomalies mark the position of the basin rim at approximately 150 km from the center. Wells in this region recovered thick sequences of impact-generated breccias at 200-300 m below present sea level. Inside the rim, which has been severely modified by erosion following impact, the subsurface basin continues to deepen until near the center it is approximately 1 km deep. The best planetary analog for this crater appears to be the 270 km-diameter Mead basin on Venus. Seismic reflection data indicate that the central zone of downward displacement and excavation (the transient crater is approximately 130 km in diameter, consistent with previous studies of gravity anomaly data). Our analysis of projectile characteristics utilizes this information, coupled with conventional scaling relationships, and geochemical constraints on the mass of extraterrestrial material deposited within the K/T boundary layer. Results indicate that the Chicxulub crater would most likely be formed by a long-period comet composed primarily of nonsilicate materials (ice, hydrocarbons, etc.) and subordinate amounts (less than or equal to 50 percent) primitive chondritic material. This collision would have released the energy equivalent to between 4 x 10(exp 8) and 4 x 10(exp 9) megatons of TNT. Studies of terrestrial impact rates suggest that such an event would have a mean production rate of approximately 1.25 x 10(exp -9) y(exp -1). This rate is considerably lower than that of the major mass extinctions over the last 250 million years (approximately 5 x 10(exp -7) y(exp -1). Consequently, while there is substantial circumstantial evidence establishing the cause-effect link between the Chicxulub basin forming event and the K/T biological extinctions, the results of our analysis do not support models of impact as a common or singular causative agent of mass extinctions on Earth.

Sharpton, Virgil L.↗

Theoretical evaluation of rigid baffles in the suppression of combustion instability

An analytical technique for the prediction of the effects of rigid baffles on the stability of liquid propellant combustors is presented. This analysis employs both two and three dimensional combustor models characterized by concentrated combustion sources at the chamber injector and a constant Mach number nozzle. An eigenfunction-matching method is used to solve the linearized partial differential equations describing the unsteady flow field for both models. Boundary layer corrections to this unsteady flow are in a mechanical energy dissipation model to evaluate viscous and turbulence effects within the flow. An integral instability relationship is then employed to predict the decay rate of the oscillations. Results of this analysis agree qualitatively with experimental observations and show that sufficient dissipation exists to indicate that the proper mechanism of baffle damping is a fluid dynamic loss. The response of the dissipation model to varying baffle blade length, mean flow Mach number, oscillation amplitude, baffle configuration, and oscillation mode is examined.

Combustion instability↗

Curvature effects on the stability of three-dimensional laminar boundary layers

The linear stability equations for compressible, three-dimensional laminar boundary layer flow are derived in an orthogonal curvilinear coordinate system. The system of equations is solved using a finite difference scheme in order to study the effects of streamline and surface curvature and compressibility on the stability of the flow past a swept wing. It is known that convex surface curvature can have a stabilizing effect on the laminar boundary layer. Conversely, concave surface curvature can be destabilizing. The magnitude of these effects for swept wings is determined. Results indicate that amplification rates and hence, N-factors, for the flow over the convex upper surface of a swept wing can be reduced by about 15 to 45 percent when curvature effects are included in the linear stability analysis. The results of the calculations show that concave curvature destabilizes crossflow type disturbances with a significant increase in amplification rate. In addition, comparisons are made with some experimental results on a swept concave-convex surface. Calculated velocity vector plots show good agreement with observed disturbances in the laminar boundary layer over the concave surface.

Collier, F. S., Jr.↗

An Analysis of Wave Interactions in Swept-Wing Flows

Crossflow instabilities dominate disturbance growth in the leading-edge region of swept wings. Streamwise vortices in a boundary layer strongly influence the behavior of other disturbances. Amplification of crossflow vortices near the leading edge produces a residual spanwise nonuniformity in the mid-chord regions where Tollmien-Schlichting (T-S) waves are strongly amplified. Should the T-S wave undergo double-exponential growth because of this effect, the usual transition prediction methods would fail. The crossflow/Tollmien-Schlichting wave interaction was modeled as a secondary instability. The effects of suction are included, and different stability criteria are examined. The results are applied to laminar flow control wings characteristic of energy-efficient aircraft designs.

Reed, H. L.↗

Design and Navier-Stokes analysis of hypersonic wind tunnel nozzles

Four hypersonic wind tunnel nozzles ranging in Mach number from 6 to 17 are designed with the method of characteristics and boundary layer approach (MOC/BL) and analyzed with a Navier-Stokes solver. Limitations of the MOC/BL approach when applied to thick high speed boundary layers with non-zero normal pressure gradients are investigated. Working gases include ideal air, thermally perfect nitrogen and virial CF4. Agreement between the design conditions and Navier-Stokes solutions for ideal air at Mach 6 is good. Thermally perfect nitrogen showed poor agreement at Mach 13.5 and Mach 17. Navier-Stokes solutions for CF4 are not obtained, but comparison of the effects of low gamma to those of high Mach number suggests that the Navier-Stokes solution would not compare well with design.

Benton, James R.↗

Sample Preparation Techniques for Grain Boundary Characterization of Annealed TRISO-Coated Particles

Crystallographic information about chemical vapor deposition layers of silicon carbide (SiC) is essential to understanding layer performance, especially when the layers are in non planar geometries, such as spherical. We performed electron Back Scatter Diffraction (EBSD) analysis of spherical SiC layers using a different approach to sample focus ion beam milling technique to avoid the negative impacts of traditional sample polishing and to address the need of very small samples of irradiated materials for analysis. Mechanical and chemical grinding and polishing of sample surfaces can introduce lattice strains and result in unequal removal of SiC and surrounding layers of different material due to the hardness differences of these materials. The nature of layer interfaces is thought to play a key role in performance of the SiC; therefore, analysis of representative samples at these interfacial areas is crucial. In work reported here, a focused ion beam (FIB) was employed in a novel manner to prepare a more representative sample for EBSD analysis from TRISO layers free of effects introduced by mechanical and chemical preparation methods. In addition, the difficulty of handling neutron irradiated microscopic samples such as those analyzed in this work has been simplified with pre tilted mounting stages. Our study showed that although the average grain size of samples may be similar, the grain boundary characteristics may differ significantly. It was also found that low angle grain boundaries, comprises 25% in the FIB-prepared sample vs only 1-2% in the polished sample measured in the same particle. From this study it was determined that results of FIB prepared sample will provide more repeatable results, as the role of sample preparation is eliminated.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

A theoretical evaluation of rigid baffles in suppression of combustion instability

An analytical technique for the prediction of the effects of rigid baffles on the stability of liquid propellant combustors is presented. This analysis employs both two and three dimensional combustor models characterized by concentrated combustion sources at the chamber injector and a constant Mach number nozzle. An eigenfunction-matching method is used to solve the linearized partial differential equations describing the unsteady flow field for both models. Boundary layer corrections to this unsteady flow are used in a mechanical energy dissipation model to evaluate viscous and turbulence effects within the flow. An integral stability relationship is then employed to predict the decay rate of the oscillations. Results of this analysis agree qualitatively with experimental observations and show that sufficient dissipation exists to indicate that the proper mechanism of baffle damping is a fluid dynamic loss.

Combustion instability↗

AUREOL-3 observations of new boundaries in the auroral ion precipitation

Interesting and well-separated structures in the 1-20 keV ion precipitation pattern have been revealed by an analysis of more than 50 crossings of the nightside (21-03 MLT) auroral zone by the AUREOL-3 satellite. First, velocity-dispersed ion structures (VDIS) are crossed near the poleward edge of the oval, and are the best ionospheric signature of ion beams flowing along the plasma sheet boundary layer. Proceeding equatorward, a large majority of VDIS events are bounded by a new and interesting narrow band of strongly reduced precipitation, or a gap, which delineates VDIS from the diffuse precipitation region connected to the CPS. A statistical analysis shows that the gap has an extent of about 1-2 deg, which is almost independent of magnetic activity; its location, about 70 deg ILAT, shifts significantly equatorward with higher magnetic activity levels. Intense electron arcs are observed near the equatorward edge of the gap. An important result is that the overall sequence of VDIS-gap-CPS can be explained in terms of orbital dynamics in the tail. The gap in precipitation appears as the counterpart of the 'wall' regime in the equatorial plane, in which a cross-tail current carried by energetic ions is strongly enhanced between 8 and 12 R(E). This region has important consequences for the development of substorms.

Bosqued, Jean M.↗

Boundary Layer Transition During the Orion Exploration Flight Test 1 (EFT-1)

Boundary layer transition was observed in the thermocouple data on the windside backshell of the Orion reentry capsule. Sensors along the windside centerline, as well as off-centerline, indicated transition late in the flight at approximately Mach 4 conditions. Transition progressed as expected, beginning at the sensors closest to the forward bay cover (FBC) and moving towards the heatshield. Sensors placed in off-centerline locations did not follow streamlines, so the progression of transition observed in these sensors is less intuitive. Future analysis will include comparisons to pre-flight predictions and expected transitional behavior will be investigated. Sensors located within the centerline and off-centerline launch abort system (LAS) attach well cavities on the FBC also showed indications of boundary layer transition. The transition within the centerline cavity was observed in the temperature traces prior to transition onset on the sensors upstream of the cavity. Transition behavior within the off centerline LAS attach well cavity will also be investigated. Heatshield thermocouples were placed within Avcoat plugs to attempt to capture transitional behavior as well as better understand the aerothermal environments. Thermocouples were placed in stacks of two or five vertically within the plugs, but the temperature data obtained at the sensors closest to the surface did not immediately indicate transitional behavior. Efforts to use the in depth thermocouple temperatures to reconstruct the surface heat flux are ongoing and any results showing the onset of boundary layer transition obtained from those reconstructions will also be included in this paper. Transition on additional features of interest, including compression pad ramps, will be included if it becomes available.

Kirk, Lindsay C.↗

Dynamics of the chemo-optical response of supported films of nematic liquid crystals

We report a study that elucidates key physicochemical phenomena that underlie the dynamics of adsorbate-induced ordering transitions in micrometer-thick films of nematic liquid crystals (LCs) supported on chemically functionalized surfaces. By flowing a gas containing dimethyl methylphosphonate (DMMP) over a film of nematic 4-cyano-4'-pentylbiphenyl (5CB) supported on a surface decorated with aluminum perchlorate, we quantify the dynamics of the optical response (intensity of transmitted light) of the LC film as a function of key experimental parameters, including linear flow rate of the gas over the surface of the film and the concentration of the DMMP within the gas. Building from prior infrared spectroscopic analysis revealing that the optical response of the LC is due to an ordering transition triggered by competitive ligand-exchange reactions at the chemically functionalized surface (i.e., between the phosphonate and nitrile groups of the DMMP and LC, respectively, with the aluminum perchlorate-decorated surface), we interpret the measurements reported herein within the framework of a simple model of mass transport. The model reveals that the rate-limiting process underlying the response of the LC is the mass transport of the DMMP across the concentration boundary layer formed on the vapor side of the LC–vapor interface, and not the mass transport of DMMP across the LC film nor the intrinsic ligand exchange kinetics. The analysis also reveals that the response of the LC is triggered once the concentration of DMMP within the LC film rises to approximately 0.25 mM. By flowing a stream of gas free of DMMP over a LC film pre-exposed to DMMP, we established that the relaxation of the LC film to the initial state is also largely controlled by mass transport of the DMMP across the vapor side of the LC–vapor interface. Analysis of the relaxation of the system leads to an estimate of the sensitivity of the supported LC film to the concentration of DMMP in the gas phase (approximately 150 ppb for the non-optimized system reported in this paper). These results and others reported in this paper identify key physical phenomena that dictate the dynamics of adsorbate-induced ordering transitions in LC systems, and provide important guidance to the design of LCs as chemo-responsive materials for use in sensors.

dimethyl methylphosphonate↗

The complex structural and chemical nature of monolithic U-10Mo fuel and Zr barrier layer

Nanoscale microstructural characterization by advanced transmission electron microscopy techniques on a U-10Mo/Zr barrier layer monolithic fuel plate was performed to evaluate the microstructural evaluation after high burn-up. Gas bubble superlattice evolution, grain restructuring, and evolution of the Zr interaction layer is investigated through detailed electron microscopy characterization. The use of automated crystallographic orientation mapping to irradiated U-10Mo fuel highlights that the restructured ultra-fine grains are separated by high angle grain boundaries at a burn up of 4.42 × 10 21 fissions/cm 3 . Additionally, advanced chemical analysis and multi-variable statistical analysis shows spatial clustering of solid fission product precipitates. Finally, characterization of a newly observed porous nanocrystalline Zr region in the barrier layer is studied. Finally, this work provides insights into the grain subdivision and restructuring process while using advanced microscopy techniques to analyze fission products in neutron-irradiated U-10Mo fuel.

36 MATERIALS SCIENCE↗

Analysis of the Scramjet inlet flow field using two-dimensional Navier-Stokes equations

A computer code was developed to solve the full two dimensional Navier-Stokes equations in a scramjet inlet. The analysis uses a numerical coordinate transformation which generates a set of boundary-fitted curvilinear coordinates. The explicit finite difference algorithm of MacCormack is used to solve the governing equations. A two-layer eddy viscosity model is used for the turbulent flow. The code can analyze both inviscid and viscous flows with multiple struts in the flow field. Detailed results are presented for two model problems and two scramjet inlets with one and two struts. The application of the two dimensional analysis in the preliminary design of the actual scramjet inlet is briefly discussed.

Kumar, A.↗

Three-Dimensional Cavity Flow Fields at Subsonic and Transonic Speeds

An experimental investigation was conducted to expand the data base and knowledge of flow fields in cavities over the subsonic and transonic speed regimes. A rectangular, 3-D cavity was tested over a Mach number range from 0.30 to 0.95 and at Reynolds numbers per foot from 1 x 10 to the 6th power to 4.2 x 10 to the 6th power. Two sizes of cavities were tested with length-to-height ratios (l/h) of 4.4 and 11.7 and with rectangular and nonrectangular cross-sections. Extensive static pressure data on the model walls were obtained and a complete tabulation of the data are presented. The boundary layer approaching the cavity was turbulent and the thickness was measured with a total pressure rake. The static pressure measurements obtained with the deep cavity configuration (l/h = 4.4) at Reynolds numbers greater than 3.0 x 10 to the 6th power per foot showed large fluctuations during the data sampling time. For the deep cavity, at lower Reynolds numbers, and for all conditions tested with the shallow cavity, the data showed much less unsteadiness. Though mean static pressure distributions have been used in past cavity analysis at transonic free stream conditions, the data presented here indicates that it is necessary to consider the instantaneous pressure distributions. The data also indicated that the shallow cavity static pressure measurements were sensitive to the thickness of the boundary layer entering the cavity.

Plentovich, E. B.↗

Scaling Analysis of Vortex Shedding Frequency between In line Plates

The Global Threat Reduction initiative (GTRI) was established by the National Nuclear Security Administration (NNSA) in 2004. One of the highlights of the program is to convert research and test reactors at home and abroad from Highly Enriched Uranium (HEU) to Low Enriched Uranium (LEU) fuels. By switching directly from HEU to LEU, an LEU reactor produces fewer neutrons than an HEU reactor and in some cases; a direct switch from HEU to LEU results in the reactor being unable to achieve criticality. Under certain circumstances, criticality is achieved and the original neutron fluxes are restored with LEU fuel by adding more fuel elements to the core. Not all reactors, exemplified by the Advanced Test Reactor (ATR) at the Idaho National Lab (INL), have the luxury of simply adding more fuel to the core. In such cases, entirely new designs must be created and tested. The ATR utilizes plate type fuel. During the design and testing of the ATR fuel, vortex shedding was identified as potential source for experiment and fuel failure. For fuel conversion, elements must be tested in pile prior to the qualification of the new fuel design. For some test elements, the primary test plate is followed by a secondary handling plate. It is known that objects downstream influence the vortex shedding. While vortex shedding is an important and well-studied phenomenon, not only in the context of nuclear engineering, but in fields as diverse as aeronautical engineering and biology, there is a significant gap in the understanding of vortex shedding in regards to two bluff bodies in line direct line with one another. The study provides a scaling analysis of the frequency of vortex shedding for plates in line. The scaling analysis is then compared to numerical simulation of two in line plates. The study provided a scaling analysis and suggested parameter for determining the expected trends in the Strouhal number for a plate with some object downstream. The analysis made the consideration of differing length scales as the cause for a reduction in vortex shedding frequency as well as looked at the potential impact of boundary layer growth on vortex shedding for a flat plate. The comparison between the expected scaling and numerical data was less than ideal, but there are several potential causes. One of the biggest issues with the comparison is the uncertainty associated with the defect velocity. The frequency was well established in several cases, but the velocity was not always well established resulting in a larger uncertainty. In the cases where the velocity was near zero (i.e. b/d = 0.5), the uncertainty dominated since the corrected Strouhal number is divided by the defect velocity. The Reynolds numbers were not incredibly large, ranging from 350-1600. The low Reynolds numbers potentially undermine the principle assumption made in the scaling analysis, i.e. Reynolds number is negligibly small. Additionally, the exact definition of the 'reduced velocity' was never explicitly defined, merely inferred from the assumption that the x length scale and y length scale were in fact different. Another potential problem is the defect velocities in the lower Reynolds number cases were not much smaller than the free stream velocity. Further work needs to be done at higher Reynolds numbers and with more data points to ensure the assumptions made are valid as well as confirm the accuracy of the scaled relationship. (authors)

42 ENGINEERING↗

Standardization of computational experiments in unsteady turbulent boundary-layer flow

Numerical experiments are proposed as standard cases to be computed by all who plan to analyze unsteady turbulent boundary layer behavior. In this way, differences between the results obtained by various methods can be compared in a completely defined environment. The test cases range in difficulty from time relaxation study of the steady flow on a flat plate to the analysis of unsteady reversed flow. Initial and boundary conditions are fully defined for each case and representative outputs are presented. It is recommended that tabulated samples of computations of these test cases be published in a compendium of results.

Carr, L. W.↗