SEARCH · Engineering Papers
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Computer program predicts electrostatic charging of three dimensional, conducting object partially or completely covered with dielectric films. Program is useful in describing spacecraft charging and material accumulation in plasma environment of magnetosphere. Numerous graphic outputs are implemented. Language is FORTRAN V, for batch execution on 1100-series computer.
Program solves physical problems governed by diffusion-type equations, provided that equations can be modeled by lumped-parameter representation. Program is used for thermal analysis, and could be adapted to solve Fourier, Poisson, and Laplace differential equations. Program is in FORTRAN IV and Assembler for execution on UNIVAC 1100-series or CYBER 175.
Flux-controlled magnetic-core-loss tester has been developed that produces high-frequency core-loss data (within 2 percent) for any desired waveform excitation and allows magnetic characteristics of material to be measured under symmetrical and asymmetrical excitation conditions. It allows direct control of additional loss variable rather than just driving frequency as is case for all previous sinusoidal core-loss measurements.
These 10 surface-analysis tests can be run without breaking vacuum: secondary-ion mass spectroscopy, ion-scattering spectroscopy, electron-stimulated desorption, residual-gas analysis, auger electron spectroscopy, x-ray photoelectron spectroscopy, ultraviolet photoelectron spectroscopy, characteristic-electron energy-loss spectroscopy, scanning electron microscope, scanning low-energy electron probe. Quadruple mass spectrometer, used in first 4 tests, serves as electron transfer lens in last 6 tests.
Analytical and empirical studies of a finite difference method for the solution of the transonic flow about harmonically oscillating wings and airfoils are presented. The procedure is based on separating the velocity potential into steady and unsteady parts and linearizing the resulting unsteady equations for small disturbances. Since sinusoidal motion is assumed, the unsteady equation is independent of time. Three finite difference investigations are discussed including a new operator for mesh points with supersonic flow, the effects on relaxation solution convergence of adding a viscosity term to the original differential equation, and an alternate and relatively simple downstream boundary condition. A method is developed which uses a finite difference procedure over a limited inner region and an approximate analytical procedure for the remaining outer region. Two investigations concerned with three-dimensional flow are presented. The first is the development of an oblique coordinate system for swept and tapered wings. The second derives the additional terms required to make row relaxation solutions converge when mixed flow is present. A finite span flutter analysis procedure is described using the two-dimensional unsteady transonic program with a full three-dimensional steady velocity potential.
The design and usage of a pilot program for calculating the pressure distributions over harmonically oscillating airfoils in transonic flow are described. The procedure used is based on separating the velocity potential into steady and unsteady parts and linearizing the resulting unsteady differential equations for small disturbances. The steady velocity potential which must be obtained from some other program, was required for input. The unsteady equation, as solved, is linear with spatially varying coefficients. Since sinusoidal motion was assumed, time was not a variable. The numerical solution was obtained through a finite difference formulation and either a line relaxation or an out of core direct solution method.
Analytical and empirical studies of a finite difference method for the solution of the transonic flow about harmonically oscillating wings and airfoils are presented. The procedure is based on separating the velocity potential into steady and unsteady parts and linearizing the resulting unsteady equations for small disturbances. The steady velocity potential is obtained first from the well-known nonlinear equation for steady transonic flow. The unsteady velocity potential is then obtained from a linear differential equation in complex form with spatially varying coefficients. Since sinusoidal motion is assumed, the unsteady equation is independent of time. An out-of-core direct solution procedure was developed and applied to two-dimensional sections. Results are presented for a section of vanishing thickness in subsonic flow and an NACA 64A006 airfoil in supersonic flow. Good correlation is obtained in the first case at values of Mach number and reduced frequency of direct interest in flutter analyses. Reasonable results are obtained in the second case. Comparisons of two-dimensional finite difference solutions with exact analytic solutions indicate that the accuracy of the difference solution is dependent on the boundary conditions used on the outer boundaries. Homogeneous boundary conditions on the mesh edges that yield complex eigenvalues give the most accurate finite difference solutions. The plane outgoing wave boundary conditions meet these requirements.
The objective of the paper is to place current research into mesoscale weather phenomena in proper perspective, and to discuss key problems to be addressed in the coming years. Key observing systems and field programs are examined, along with analysis techniques in context of the dynamic models with which they interact. The discussion covers different classes of dynamic models, including prediction models, simulation models, and parameterization schemes.
A miniature gas analysis system has been built based on the principles of gas chromatography (GC). The major components are fabricated in silicon using photolithography and chemical etching techniques, which allows size reductions of nearly three orders of magnitude compared to conventional laboratory instruments. The chromatography system consists of a sample injection valve and a 1.5-m-long separating capillary column, which are fabricated on a substrate silicon wafer. The output thermal conductivity detector is separately batch fabricated and integrably mounted on the substrate wafer. The theory of gas chromatography has been used to optimize the performance of the sensor so that separations of gaseous hydrocarbon mixtures are performed in less than 10 s. The system is expected to find application in the areas of portable ambient air quality monitors, implanted biological experiments, and planetary probes.
Explore the source record for details and available documents.
IOALZ4 is an Assembly-language utility program for UNIVAC 1108, operational under level 33 of EXEC 8 operating system. It scans user-selected portions of system log file, whether located on tape or mass storage, searching for and processing I/O error entries.
Proposed circuit would monitor vibration spectrum of engines under test or in service. It could detect subtle out-of-specification conditions and could be programed to shut down engine if an out-of-limits condition develops. Possible uses of monitor are in bench testing automobiles and outboard motors and as a safety device in very critical engine applications.
New method available for monitoring stability of system on basis of data sampled at multiple rates--in particular, at two rates, one of which is twice frequency of other. Method is called Multirate Matrix Frequency Response (MMFR) analysis. MMFR was used in Space Shuttle to evaluate effect of decreasing sample rate of error loop in ascent-phase digital autopilot. Should also be useful to designers of other control systems and to structural, civil, and mechanical engineers for structure and vibration analysis.
An efficient method for detecting carbon fibers collected on a stick tape monitor was developed. The fibers were released from a simulated crash fire situation containing carbon fiber composite material. The method utilized the ability of the fiber to initiate a spark across a set of alternately biased high voltage electrodes to electronically count the number of fiber fragments collected on the tape. It was found that the spark, which contains high energy and is of very short duration, is capable of partially damaging or consuming the fiber fragments. It also creates a mechanical disturbance which ejects the fiber from the grid. Both characteristics were helpful in establishing a single discharge pulse for each fiber segment.
An Interactive Cluster Analysis Procedure (ICAP) was developed to derive classifier training statistics from remotely sensed data. The algorithm interfaces the rapid numerical processing capacity of a computer with the human ability to integrate qualitative information. Control of the clustering process alternates between the algorithm, which creates new centroids and forms clusters and the analyst, who evaluate and elect to modify the cluster structure. Clusters can be deleted or lumped pairwise, or new centroids can be added. A summary of the cluster statistics can be requested to facilitate cluster manipulation. The ICAP was implemented in APL (A Programming Language), an interactive computer language. The flexibility of the algorithm was evaluated using data from different LANDSAT scenes to simulate two situations: one in which the analyst is assumed to have no prior knowledge about the data and wishes to have the clusters formed more or less automatically; and the other in which the analyst is assumed to have some knowledge about the data structure and wishes to use that information to closely supervise the clustering process. For comparison, an existing clustering method was also applied to the two data sets.
The application of an imaging-type, automated spray analysis system to measurements of fuel sprays requires consideration of a number of significant factors both in its use and in the interpretation of the data. These factors are reviewed and a procedure developed for one such instrument is described. The procedure involves optical scans along the optic axis of the system and an appropriate mathematical inversion scheme for interpretation of the results. The system is nominally capable of yielding the local size distribution function and the total number density at points along the optic axis for droplets from about 10 to 500 microns. No assumptions regarding the form of the size distribution function or the symmetry of the spray are required.
An Interactive Cluster Analysis Procedure (ICAP) was developed to derive classifier training statistics from remotely sensed data. ICAP differs from conventional clustering algorithms by allowing the analyst to optimize the cluster configuration by inspection, rather than by manipulating process parameters. Control of the clustering process alternates between the algorithm, which creates new centroids and forms clusters, and the analyst, who can evaluate and elect to modify the cluster structure. Clusters can be deleted, or lumped together pairwise, or new centroids can be added. A summary of the cluster statistics can be requested to facilitate cluster manipulation. The principal advantage of this approach is that it allows prior information (when available) to be used directly in the analysis, since the analyst interacts with ICAP in a straightforward manner, using basic terms with which he is more likely to be familiar. Results from testing ICAP showed that an informed use of ICAP can improve classification, as compared to an existing cluster analysis procedure.
The proposed modal test program differs from single-input methods in that preliminary data may be acquired using multiple inputs, and modal tuning procedures may be employed to define closely spaced frquency modes more accurately or to make use of frequency response functions (FRF's) which are based on several input locations. In some respects the proposed modal test proram resembles earlier sine-sweep and sine-dwell testing in that broadband FRF's are acquired using several input locations, and tuning is employed to refine the modal parameter estimates. The major tasks performed in the proposed modal test program are outlined. Data acquisition and FFT processing, curve fitting, and modal tuning phases are described and examples are given to illustrate and evaluate them.