SEARCH · Engineering Papers

Results for “affinity”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,279 records · Page 71

All sources NASA NTRS DOE OSTI

DOE OSTI2022

Localization Effect in Photoelectron Transport Induced by Alloy Disorder in Nitride Semiconductor Compounds

Near-band-gap photoemission spectroscopy experiments were performed on p-GaN and p-InGaN/GaN photocathodes activated to negative electron affinity. Here, the photoemission quantum yield of the InGaN samples with more than 5% of indium drops by more than 1 order of magnitude when the temperature is decreased while it remains constant for lower indium content. This drop is attributed to a freezing of photoelectron transport in p-InGaN due to electron localization in the fluctuating potential induced by the alloy disorder. This interpretation is supported by the disappearance at low temperature of the peak in the photoemission spectrum that corresponds to the contribution of the photoelectrons relaxed at the bottom of the InGaN conduction band.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

DOE OSTI2023

Nonmonotonic effect of chemical heterogeneity on interfacial crack growth at high-angle grain boundaries in Fe-Ni-Cr alloys

Here, an intermittent pattern is observed in the modeling of interfacial cyclic-loading crack growth at high-angle grain boundaries in ternary Fe-Ni-Cr alloys. Different from conventional wisdom of stress-intensity factor, the abrupt crack advances are found driven by extreme value statistics—namely, the aggregation of atoms with most compressive residual stresses. In addition, inherently non-affine atomic stress fluctuations are discovered, and the fluctuations peak at intermediate level of chemical heterogeneity, causing the fastest crack growth. Implications of such nonmonotonic mechanism in regard to the origin of intermediate-temperature embrittlement phenomena are also discussed.

36 MATERIALS SCIENCE↗

DOE OSTI2024

Optical tuning of the diamond Fermi level measured by correlated scanning probe microscopy and quantum defect spectroscopy

Quantum technologies based on quantum point defects in crystals require control over the defect charge state. Here we tune the charge state of shallow nitrogen-vacancy and silicon-vacancy centers by locally oxidizing a hydrogenated surface with moderate optical excitation and simultaneous spectral monitoring. The loss of conductivity and change in work function due to oxidation are measured in atmosphere using conductive atomic force microscopy and Kelvin probe force microscopy (KPFM). We correlate these scanning probe measurements with optical spectroscopy of the nitrogen-vacancy and silicon-vacancy centers created via implantation 15–25 nm beneath the diamond surface and annealing. The observed charge state of the defects as a function of optical exposure demonstrates that laser oxidation provides a way to precisely tune the Fermi level over a range of at least 2.00 eV. We also observe a significantly larger oxidation rate for implanted surfaces compared to unimplanted surfaces under ambient conditions. Here, combined with knowledge of the electron affinity of a surface, these results suggest KPFM is a powerful, high-spatial-resolution technique to advance surface Fermi level engineering for charge stabilization of quantum defects.

36 MATERIALS SCIENCE↗

DOE OSTI2025

Geometric origin of the energy-momentum tensor improvement terms

In a flat background, the canonical energy momentum tensor of Lorentz and conformally invariant matter field theories can be improved to a symmetric and traceless tensor that gives the same conserved charges. We argue that the geometric origin of this improvement process is unveiled when the matter theory is coupled to metric-affine gravity. In particular, we show that the Belinfante-Rosenfeld improvement terms correspond to the matter theory’s hypermomentum. The improvement terms in conformally invariant matter theories are also related to the hypermomentum; however, a general proof would require an extended investigation. We demonstrate our results through various examples, such as the free massless scalar, the Maxwell field, Abelian p-forms, the Dirac field, and a nonunitary massless scalar field. Possible applications of our method for theories that break Lorentz or special conformal invariance are briefly discussed.

classical solutions in field theory↗

DOE OSTI2020

Compensatory Guaiacyl Lignin Biosynthesis at the Expense of Syringyl Lignin in 4CL1 -Knockout Poplar -Knockout Poplar

The lignin biosynthetic pathway is highly conserved in angiosperms, yet pathway manipulations give rise to a variety of taxon-specific outcomes. Knockout of lignin-associated 4-coumarate:CoA ligases (4CLs) in herbaceous species mainly reduces guaiacyl (G) lignin and enhances cell wall saccharification. In this work we show that CRISPR-knockout of 4CL1 in poplar (Populus tremula x alba) preferentially reduced syringyl (S) lignin, with negligible effects on biomass recalcitrance. Concordant with reduced S-lignin was downregulation of ferulate 5-hydroxylases (F5Hs). Lignification was largely sustained by 4CL5, a low-affinity paralog of 4CL1 typically with only minor xylem expression or activity. Levels of caffeate, the preferred substrate of 4CL5, increased in line with significant upregulation of caffeoyl shikimate esterase1. Upregulation of caffeoyl-CoA O-methyltransferase1 and downregulation of F5Hs are consistent with preferential funneling of 4CL5 products toward G-lignin biosynthesis at the expense of S-lignin. Thus, transcriptional and metabolic adaptations to 4CL1-knockout appear to have enabled 4CL5 catalysis at a level sufficient to sustain lignification. Finally, genes involved in sulfur assimilation, the glutathione-ascorbate cycle, and various antioxidant systems were upregulated in the mutants, suggesting cascading responses to perturbed thioesterification in lignin biosynthesis.

09 BIOMASS FUELS↗

DOE OSTI2023

Quantifying molecular deformation in polymer melts by a generalized Zimm plot approach

The Zimm plot has been widely used to characterize the molecular dimensions of polymers from small-angle scattering experiments, where the reciprocal intensity is analyzed as a function of the square of the magnitude of the scattering wavevector Q. Here, this work explores the benefits of analyzing the reciprocal scattering intensity from deformed polymers, extending the original Zimm plot to anisotropic materials. In the small-angle limit, a tensorial extension of the Guinier law is found for the gyration tensor and the reciprocal single-chain structure factor. In the high-Q limit, application of the spherical harmonic expansion technique to the reciprocal structure factor permits direct model-independent analysis of spatially dependent molecular deformation of polymers. Additionally, the contributions from high-order spherical harmonics become insignificant in the reciprocal-intensity representation. The proposed generalized Zimm plot approach is demonstrated computationally with the affine deformation model and the Rouse model, and experimentally with small-angle neutron scattering measurements of deformed polystyrene melts.

36 MATERIALS SCIENCE↗

DOE OSTI2022

Diffuse X-ray scattering from polished silicon: application of the distorted wave Born approximation

Measured diffuse X-ray scattering data for a `smooth' as well as for a `rough' silicon sample were fit to theoretical expressions within the distorted wave Born approximation (DWBA). Data for the power spectral density (PSD) for both samples were also obtained by means of atomic force microscopy and optical interferometry. The Fourier transforms of trial correlation functions were fit to the PSD data and then applied to the DWBA formalism. The net correlation functions needed to fit the PSD data for each sample comprised the sum of two terms with different cutoff lengths and different self-affine fractal exponents. At zero distance these correlation functions added up to yield net values of σ 2 = (2) 2 and (71) 2 Å 2 for the smooth and rough samples, respectively. X-ray scattering data were obtained at beamline 1-BM of the Advanced Photon Source. Data and fits at values of q z = 0.05 and 0.10 Å −1 for the smooth sample are reported. Good fits for the smooth sample were obtained at both q z values simultaneously, that is, identical fitting parameters were applied at both values of q z . The smooth sample also exhibited weak Yoneda wings and a clear distinction between the strong specular scattering and the weak diffuse scattering. Data for the rough sample were qualitatively different and exhibited very weak scattering at the specular condition in contrast to extremely large Yoneda wings. Fits for the rough sample are reported for q z = 0.04, 0.05, and 0.06 Å −1 . Although the large Yoneda wings could be fit quite well in both position and amplitude, scattering near the specular condition could not be equally well fit by applying the same fitting parameters at all values of q z . Albeit imperfect, best-fitting results at the specular condition were obtained by invoking only diffuse scattering, that is, without including a separate theoretical expression for specular scattering.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

DOE OSTI2022

Changes in active-site geometry on X-ray photoreduction of a lytic polysaccharide monooxygenase active-site copper and saccharide binding

The recently discovered lytic polysaccharide monooxygenases (LPMOs) are Cu-containing enzymes capable of degrading polysaccharide substrates oxidatively. The generally accepted first step in the LPMO reaction is the reduction of the active-site metal ion from Cu 2+ to Cu + . Here we have used a systematic diffraction data collection method to monitor structural changes in two AA9 LPMOs, one from Lentinus similis (LsAA9_A) and one from Thermoascus aurantiacus (TaAA9_A), as the active-site Cu is photoreduced in the X-ray beam. For LsAA9_A, the protein produced in two different recombinant systems was crystallized to probe the effect of post-translational modifications and different crystallization conditions on the active site and metal photoreduction. We can recommend that crystallographic studies of AA9 LPMOs wishing to address the Cu 2+ form use a total X-ray dose below 3 × 10 4 Gy, while the Cu + form can be attained using 1 × 10 6 Gy. In all cases, we observe the transition from a hexacoordinated Cu site with two solvent-facing ligands to a T-shaped geometry with no exogenous ligands, and a clear increase of the θ 2 parameter and a decrease of the θ 3 parameter by averages of 9.2° and 8.4°, respectively, but also a slight increase in θ T . Thus, the θ 2 and θ 3 parameters are helpful diagnostics for the oxidation state of the metal in a His-brace protein. On binding of cello-oligosaccharides to LsAA9_A, regardless of the production source, the θ T parameter increases, making the Cu site less planar, while the active-site Tyr—Cu distance decreases reproducibly for the Cu 2+ form. Thus, the θ T increase found on copper reduction may bring LsAA9_A closer to an oligosaccharide-bound state and contribute to the observed higher affinity of reduced LsAA9_A for cellulosic substrates.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

DOE OSTI2024

Stability-Constrained Learning for Frequency Regulation in Power Grids With Variable Inertia

The increasing penetration of converter-based renewable generation has resulted in faster frequency dynamics, and low and variable inertia. As a result, there is a need for frequency control methods that are able to stabilize a disturbance in the power system at timescales comparable to the fast converter dynamics. This paper proposes a combined linear and neural network controller for inverter-based primary frequency control that is stable at time-varying levels of inertia. We model the time-variance in inertia via a switched affine hybrid system model. We derive stability certificates for the proposed controller via a quadratic candidate Lyapunov function. We test the proposed control on a 12-bus 3-area test network, and compare its performance with a base case linear controller, optimized linear controller, and finite-horizon Linear Quadratic Regulator (LQR). Our proposed controller achieves faster mean settling time and over 50% reduction in average control cost across 100 inertia scenarios compared to the optimized linear controller. Unlike LQR which requires complete knowledge of the inertia trajectories and system dynamics over the entire control time horizon, our proposed controller is real-time tractable, and achieves comparable performance to LQR.

data-driven control↗

DOE OSTI2024

Robust and Simple ADMM Penalty Parameter Selection

We present a new method for online selection of the penalty parameter for the alternating direction method of multipliers (ADMM) algorithm. ADMM is a widely used method for solving a range of optimization problems, including those that arise in signal and image processing. In its standard form, ADMM includes a scalar hyperparameter, known as the penalty parameter, which usually has to be tuned to achieve satisfactory empirical convergence. In this work, we develop a framework for analyzing the ADMM algorithm applied to a quadratic problem as an affine fixed point iteration. Using this framework, we develop a new method for automatically tuning the penalty parameter by detecting when it has become too large or small. We analyze this and several other methods with respect to their theoretical properties, i.e., robustness to problem transformations, and empirical performance on several optimization problems. Our proposed algorithm is based on a theoretical framework with clear, explicit assumptions and approximations, is theoretically covariant/invariant to problem transformations, is simple to implement, and exhibits competitive empirical performance.

42 ENGINEERING↗

DOE OSTI2020

Evidence of Buried Junctions in CdSeTe Absorbers

The introduction of selenium band gap gradients has been shown to be a promising path for improving CdTe devices. Controlling maximum selenium concentration during deposition should allow for better device performance. In this work cross-section electron beam induced current (EBIC) maps were measured for CdSeTe/CdTe devices with as-grown selenium concentration between 0 and 20 percent. Measured EBIC profiles show high collection in the middle of the absorber layer, which differs from past EBIC studies of CdSe/CdTe devices. Increasing as-deposited selenium concentrations resulted in increased collection at this mid-absorber location. Combined with a 2-dimensional numerical model, these results suggest a buried homo-junction in the absorber layer of the device. This buried junction may be associated with a number of composition dependent parameters including electron affinity and p-dopability. Understanding this collection profile and its implications for device performance may be key in optimizing CdSeTe/CdTe devices.

CdSeTe↗

DOE OSTI2021

Numerical Simulations of Time-Resolved Photoluminescence in CdSexTe1-x/CdTe Solar Cells

We present initial time-resolved photoluminescence (TRPL) simulations in graded CdSexTe1-e thin-film solar cells to quantify the front-interface recombination velocity, S int,front . Our model includes several composition dependences: bandgap energy, absorption coefficient, electron affinity, and carrier lifetime. Cathodoluminescence spectrum imaging measurements on bevels provide an estimate of the bandgap and the CdSe x Te 1-x alloy composition through the absorber thickness. TRPL decays are simulated as a function of the laser power, S int,front , front-interface band offset, and bulk Shockley-Read-Hall lifetime. We find the impact of S intf,ront on the PL decay increases as the band offset shifts from a "spike" to a "cliff". Recombination rate analysis shows that back-interface recombination could potentially dictate the later part of the TRPL decay "t 2" in high-lifetime CdSe x Te 1-x cells. We briefly discuss ongoing work to determine TRPL measurement conditions that maximize sensitivity to S itnt,front.

CdTe solar cells↗

DOE OSTI2025

Data-Conforming Data-Driven Control: Avoiding Premature Generalizations Beyond Data

Data-driven and adaptive control approaches face the problem of introducing sudden distributional shifts beyond the distribution of data encountered during learning. Therefore, they are prone to invalidating the very assumptions used in their own construction. This is due to the linearity of the underlying system, inherently assumed and formulated in most data-driven control approaches, which may falsely generalize the behavior of the system beyond the behavior experienced in the data. This article seeks to mitigate these problems by enforcing consistency of the newly designed closed-loop systems with data and slowing down any distributional shifts in the joint state-input space. This is achieved through incorporating affine regularization terms and linear matrix inequality constraints to data-driven approaches, resulting in convex semi-definite programs that can be efficiently solved by standard software packages. We discuss the optimality conditions of these programs and then conclude this article with a numerical example that further highlights the problem of premature generalization beyond data and shows the effectiveness of our proposed approaches in enhancing the safety of data-driven control methods.

97 MATHEMATICS AND COMPUTING↗

DOE OSTI2019

Deliverable Flexible Ramping Products Considering Spatiotemporal Correlation of Wind Generation and Demand Uncertainties

Flexible ramping products (FRPs) have been implemented by several independent system operators (ISOs) to procure adequate flexible resources. Currently, system operators estimate the system level ramping requirements ignoring the spatiotemporal correlations among various uncertainty sources. This leads to overestimates/underestimates of ramping requirements. In addition, the explicit FRPs model considers only the generation ramping limitation. Other security constraints, such as the transmission limits, are not considered, which leads to deliverability issues of FRPs. To deal with these shortcomings of current FRPs models, this paper proposes a deliverable FRPs based on a distributionally-robust chance constrained multi-interval optimal power flow (DRCC-MIOPF) considering the spatiotemporal correlation of wind power and demand uncertainties endogenously. Furthermore, an asymmetrical affine policy (AAP) is proposed to leverage generation flexibility and mitigate the uncertainty in different directions. The pricing mechanism of the FRPs is proposed using a novel uncertainty-contained locational marginal price (U_LMP) which is derived from the proposed AAP-DRCC-MIOPF model. New components representing the price of FRPs are added into the traditional LMP formulation. Finally, the PJM 5-bus, IEEE 39-bus and IEEE 118-bus systems case studies validate the proposed FRPs approach. The payment of uncertain demand and wind power on FRPs are analyzed.

electricity market↗

DOE OSTI2022

The dimeric form of bacterial l ‐asparaginase YpAI is fully active

l ‐asparaginases from mesophilic bacteria (ASNases), including two enzymes very successfully used in the treatment of leukaemia, have been consistently described as homotetramers. On the contrary, structural studies show that homodimers of these enzymes should be sufficient to carry out the catalytic reaction. In this report, we investigated whether the type I Yersinia pestis asparaginase (YpAI) is active in a dimeric form or whether the tetrameric quaternary structure is critical for its activity. Using multiple biophysical techniques that investigate enzymatic properties and quaternary structure at either high or low protein concentration, we found that dimeric YpAI is fully active, suggesting that the tetrameric form of this subfamily of enzymes does not bear significant enzymatic relevance. In this process, we extensively characterized YpAI, showing that it is a cooperative enzyme, although the mechanism of allostery is still not definitely established. We showed that, like most type I ASNases, the substrate affinity of YpAI is low and this enzyme is very similar in terms of both the structure and enzymatic properties to homologous type I ASNase from Escherichia coli (EcAI). We extended these studies to more medically relevant type II ASNases, used as anti‐leukaemia drugs. We confirmed that type II ASNases are not allosteric, and that they might also be functional in a dimeric form. However, the determination of the accurate tetramer⇆dimer dissociation constants of these enzymes that most likely lie in the picomolar range is not possible with currently available biophysical techniques.

Biochemistry & Molecular Biology↗

DOE OSTI2023

Structural and functional analysis of two SHMT8 variants associated with soybean cyst nematode resistance

Two amino acid variants in soybean serine hydroxymethyltransferase 8 (SHMT8) are associated with resistance to the soybean cyst nematode (SCN), a devastating agricultural pathogen with worldwide economic impacts on soybean production. SHMT8 is a cytoplasmic enzyme that catalyzes the pyridoxal 5‐phosphate‐dependent conversion of serine and tetrahydrofolate (THF) to glycine and 5,10‐methylenetetrahydrofolate. A previous study of the P130R/N358Y double variant of SHMT8, identified in the SCN‐resistant soybean cultivar (cv.) Forrest, showed profound impairment of folate binding affinity and reduced THF‐dependent enzyme activity, relative to the highly active SHMT8 in cv. Essex, which is susceptible to SCN. Given the importance of SCN‐resistance in soybean agriculture, we report here the biochemical and structural characterization of the P130R and N358Y single variants to elucidate their individual effects on soybean SHMT8. We find that both single variants have reduced THF‐dependent catalytic activity relative to Essex SHMT8 (10‐ to 50‐fold decrease ink cat /K m ) but are significantly more active than the P130R/N368Y double variant. The kinetic data also show that the single variants lack THF‐substrate inhibition as found in Essex SHMT8, an observation with implications for regulation of the folate cycle. Five crystal structures of the P130R and N358Y variants in complex with various ligands (resolutions from 1.49 to 2.30 Å) reveal distinct structural impacts of the mutations and provide new insights into allosterism. Our results support the notion that the P130R/N358Y double variant in Forrest SHMT8 produces unique and unexpected effects on the enzyme, which cannot be easily predicted from the behavior of the individual variants.

Biochemistry & Molecular Biology↗

DOE OSTI2024

Biophysical and Structural Features of αβT ‐Cell Receptor Mechanosensing: A Paradigmatic Shift in Understanding T‐Cell Activation

ABSTRACT αβT cells protect vertebrates against many diseases, optimizing surveillance using mechanical force to distinguish between pathophysiologic cellular alterations and normal self‐constituents. The multi‐subunit αβT‐cell receptor (TCR) operates outside of thermal equilibrium, harvesting energy via physical forces generated by T‐cell motility and actin‐myosin machinery. When a peptide‐bound major histocompatibility complex molecule (pMHC) on an antigen presenting cell is ligated, the αβTCR on the T cell leverages force to form a catch bond, prolonging bond lifetime, and enhancing antigen discrimination. Under load, the αβTCR undergoes reversible structural transitions involving partial unfolding of its clonotypic immunoglobulin‐like (Ig) domains and coupled rearrangements of associated CD3 subunits and structural elements. We postulate that transitions provide critical energy to initiate the signaling cascade via induction of αβTCR quaternary structural rearrangements, associated membrane perturbations, exposure of CD3 ITAMs to phosphorylation by non‐receptor tyrosine kinases, and phase separation of signaling molecules. Understanding force‐mediated signaling by the αβTCR clarifies long‐standing questions regarding αβTCR antigen recognition, specificity and affinity, providing a basis for continued investigation. Future directions include examining atomistic mechanisms of αβTCR signal initiation, performance quality, tissue compliance adaptability, and T‐cell memory fate. The mechanotransduction paradigm will foster improved rational design of T‐cell based vaccines, CAR‐Ts, and adoptive therapies.

Immunology↗

DOE OSTI2025

Quantifications of growth rate and particle size of magnesium silicate hydrate cement using small‐angle X‐ray scattering

The focus of recent research on cement binders has shifted to alternatives such as magnesium silicate hydrate (M-S-H) to mitigate the environmental impact of conventional concrete production. However, a detailed understanding of the morphology and growth rate of M-S-H, which informs its applicability as a cementing agent, is lacking. These properties are important as they influence cement hydration and consequently the development of macroscopic properties. Here, in this study, the particle size distribution and growth rate of M-S-H synthesized by mixing aqueous stock solutions were analyzed using synchrotron-based small-angle X-ray scattering. The reaction solutions contained dissolved magnesium and silicon with concentrations ranging from 2 to 500 mM, corresponding to saturation indices with respect to M-S-H endmembers, M 0.75 -S-H and M 1.50 -S-H, between 5.8 and 10.3. The precipitation rates of M-S-H align with affinity-based kinetic models and can be described by the following equations: For M 0.75 -S-H: 𝑟 M 0.75 −S−H =10 −9.54±0.70 ⁢(Ω$^{0.59±0.08}_{M_{0.75}⁢\textrm{SH}}$−1), and for M 1.50 -S-H: 𝑟 M 1.50 −S−H =10 −7.56±0.37 ⁢(Ω$^{0.34±0.04}_{M_{1.50}⁢\textrm{SH}}$−1), where 𝑟 is the rate in mol/L/s, and Ω represents the saturation ratio with respect to M-S-H. Moreover, we observed that changing the [Mg]/[Si] ratio affects particle size, a trend that cannot be fully explained by changes in the saturation index alone. These insights are critical for improving the predictability and control of cementation in concrete that utilizes M-S-H-based binders.

M-S-H↗